The NYCO GREASE® range of greases includes multi-purpose or special-purpose mineral and synthetic greases for extreme applications (low and high temperatures, high speed and pressure, saline, corrosive, humid environments, etc.), compliant with civil, military aviation and industrial constraints. They are intended for use in a variety of applications such as airframe, slats, flaps, heavy loads, THS (Tail Horizontal Stabilizer), actuators, bearings, doors, landing gears, wheels, jacks, rudders, LRU (Line Replaceable Units) and also as an anti-seize or assembly compound, protection grease, etc.  NYCO GREASE® NLGI 2 grade greases commonly used in Aerospace and Defense applications with respective specifications & approvals, are outlined below. 

NYCO GREASE® GN 06 mineral grease thickened with a lithium soap for use in low speed and sliding motion parts and as an airframe multipurpose grease (doors, slaps, flaps, landing gear, etc.

NYCO GREASE® GN 10 and GN 22 general purpose airframe greases

NYCO GREASE® GN 15 general purpose aircraft lithium grease

NYCO GREASE® GN 43 an aircraft synthetic grease for instruments and ejection seats

NYCO GREASE® GN 44 a synthetic aircraft grease for weapons

NYCO GREASE® GN 45 a blend of silicone and graphite, ideal for lubrication of roller bearings, transmissions in propellers, threading, etc.

NYCO GREASE® GN 69 a heat-stable silicone oil thickened with a non-melting gelling agent for electrical insulation.

NYCO GREASE® GN 148 a multi-purpose airframe and landing gear grease containing excellent anti-corrosion additives

NYCO GREASE® GN 155 a heavy duty naval, sea-water resistant grease for use in lubrication of bearings, ropes, pins and joints exposed to sea-water wash-out, dust, temperature and heavy loads – including components fully immersed in sea-water

NYCO GREASE® GN 25013 a multipurpose extreme temperature airframe grease, based on silicone oil, thickened with polytetrafluoroethylene and reinforced with anti-corrosion and antioxidant additives

NYCO GREASE® GN 3058, based on lithium complex, intended for use in wheel bearings, propeller bearings and highly loaded landing gear areas

NYCO also offers 65 Vaseline, a stiff, rather tacky petrolatum (heavy mineral paraffin wax), with a melting point in the range 45 to 60°C. It is not aggressive to any metal or alloy and can be used for anti-seize protection, assembly and dismantling of aircraft and helicopter parts and seals, temporary rust prevention in workshop and battery terminals protection. Approvals/Qualifications: AIR 3565/A, VV-P-236, CML 03FAB1, ATR CML 04-012, CFMI CP 5070, Snecma DMR 75-103, Boeing CML D00504, Airbus Helicopters CM119.

NYCO and ANDEROL® ROYCO® oils, greases, fluids and specialty products are used in Russian aircraft meeting the corresponding manufacturers' specifications. Most of their products can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products.

The TURBONYCOIL® product range of high-performance mineral and synthetic oils produced by NYCO are used in aircraft turbine (turbo-jet, turbo-prop, etc.) and piston engines, power units, turbo-reactors, APUs, starters, IDGs for aircraft, helicopters, naval vessels (aircraft carriers, frigates, etc.) and land equipment. Also used for aero-derivative turbines for land and sea applications (cogeneration, offshore power generation, gas compression). NYCO TURBONYCOIL® turbine oils are fortified with carefully selected anti-oxidant, anti-corrosion, anti-wear and extreme-pressure additives. TURBONYCOIL® oils are used in aircraft of many air forces (Mirage, Rafale, Eurofighter, F-16, F-22 and F-35) as well as on aircraft from Russian & Ukrainian manufacturers. 

Commonly used NYCO TURBONYCOIL®  products include:

TURBONYCOIL® 98: Synthetic turbine engine oil used on Russian-made aircraft

TURBONYCOIL® 160: Ester-based oil, specially designed to withstand high temperatures and remain fluid at very low temperatures

TURBONYCOIL® 321: 8 cSt mineral turbine engine oil for Russian-made aircraft

TURBONYCOIL® 3516: Mineral turbine oil designed for protection

TURBONYCOIL® 3560/3570: Single grade mineral oils for piston engines

TURBONYCOIL® 600: STD/SPC 5 cSt synthetic oil for turbojet engines

TURBONYCOIL® 601: 5 cSt corrosion inhibited synthetic turbine oil

TURBONYCOIL® 640: 5 cSt high thermal stability turbine oil

Many TURBONYCOIL®  products or their analogs by other producers are included in our offered product range and can be furnished on demand through our current network of co-operating suppliers. 

Please refer to the Product Description section, the supplied documentation or contact us for additional information and assistance.

NYCO HYDRAUNYCOIL® range of products includes mineral and synthetic fluids for hydraulic systems and circuits subjected to high and low temperatures, resistant to fire, extreme pressure and corrosion, and biodegradable. NYCO HYDRAUNYCOIL® fluids are shock-strut fluids. The main hydraulic fluids used in civil aviation are phosphate ester based fluids produced by Exxon-Mobil and Eastman Skydrol.

Different NYCO HYDRAUNYCOIL® hydraulic fluids are available addressing the requirements of specific sectors/applications:

FH & EL series for the Automotive & Industrial sectors,

FH 14 recoil and hydraulic system fluid

FH 19 recoil and hydraulic system fluid for Navy vessels

FH 51 hydraulic fluid used on all types of aircraft

FH 5 AW / 6 AW fluids dedicated to Boeing aircraft in operation, after overhaul and under storage. Also available for Airbus aircraft.

FH 42 synthetic shock strut fluid for new generation aircraft

FH 2 helicopter and fighter jet system fluid

Applications

Aeronautical: damping fluid for landing gears (initial assembly at the main OEMs), fluids for helicopters and combat aircraft, actuators, THS (Tail Horizontal Stabilizer), test bench, etc.

Military: mobile equipment, artillery, gun-mounts, tanks, missile hydraulics, etc.

Automotive: biodegradable hydraulics for public works, lifting and marine equipment, etc.

Industrial: dams, drill bits, etc.

For more information on NYCO HYDRAUNYCOIL® fluids please refer to the supplied documentation.

NYCO and ANDEROL® ROYCO® oils, greases, fluids and specialty products are used in aircraft of Russian and Ukrainian manufacturers meeting the corresponding specifications. Most of their products are included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

PHILLIPS 66® Company is among the largest refiners in the U.S, a major contract jet and avgas fuel supplier to private, commercial, and military aviation and a producer of industrial oils. The Phillips 66® line of aviation lubricants approved by the FAA and leading engine manufacturers includes premium single and multiviscosity piston engine oils and  highest quality hydraulic fluids compatible with other brands. They can be used in diverse climatic conditions. PHILLIPS 66® protective additive packages exceed industry specifications.

Some of PHILLIPS 66® aviation lubricants listed below are offered through our Web Platform for Supplies. Others, not currently listed, can also be furnished through our network of co-operating suppliers. For more information please refer to the Product Description section, the supplied documentation or contact us.

PHILLIPS 66® Aviation & Industrial Oils

PHILLIPS 66® X/C® Aviation Oil, Ashless Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines

PHILLIPS 66® VICTORY® Aviation Oils

VICTORY® Aviation Oil 100AW, Ashless Dispersant, Single-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)

VICTORY® Aviation Oil AW 20W-50, Ashless Dispersant, Multi-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)

VICTORY® DIESEL Aviation Oil 10W-40, Fully Synthetic Aviation Engine Oil for Aircraft Compression Ignition Engines

PHILLIPS 66® TYPE A Aviation Oil, Ashless Dispersant, Single-Grade Engine Oil for Aircraft Piston Engines. Available in two grades, 100AD (SAE 50) and 120AD (SAE 60)

PHILLIPS 66® TYPE M Aviation Oil, Non-Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines

PHILLIPS 66® Reference Oil 50

PHILLIPS 66® Food Grade White Mineral Oil for use in food processing plants, consumer products, and in other applications.

For more than 50 years, PPG AEROSPACE® – PRC-DeSoto® has been a leader in the development of products fundamental to aerospace manufacturing, maintenance, and repair. The company manufactures and provides a unique group of products including aircraft windshields and windows to the commercial, regional, military and general aviation segments as well as aircraft primers, coatings and sealants for aircraft structures used in aviation and milirary applications. In addition, high performance Industrial Adhesives and Sealants  are also offered to provide protection from fuel and petroleum exposure as well as sealants for Telecom and Utility applications.

PPG AEROSPACE® – PRC-DeSoto® products are offered in different classes, specifications, application times and convenient container options including SEMCO Semkit® packages containing both the base and accelerator in one pack.

3 classes are generally used for the classification of sealants (A, B and C) although an S class does apply in some cases where a sealant can be sprayed.

Class A – Brush application, generally used on fasteners

Class B – Thicker consistency, used for fillet and injection seals

Class C – Thinner than Class B, used for fay sealing

Application times are expressed in hours (2 indicating 2 hours 1/2 indicating half an hour).

Aircraft Fuselage and Access Door Sealants are included in this presentation while respective Aircraft Firewall Sealants, Fuel Tank  Sealants, Corrosion Inhibitive Sealants and Coatings are separately presented.

For additional information on offered products please consult the Product Description Section and the supplied documentation.

Different aircraft engine firewall sealants are included in this presentation while other PPG AEROSPACE® products are separately presented.

PPG AEROSPACE® PR-812 is a high temperature primerless firewall sealant. It is a two-part, synthetic rubber compound designed for sealing firewall structures against the passage of air and vapours.

The uncured material is a low sag paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant to common aircraft substrate. It has a service temperature range from -54°C (-65°F) to 204°C (400°F), and will withstand flash temperatures of 1093°C (2000°F). HAZARDOUS MATERIAL.

PPG AEROSPACE® Pro-Seal P/S 700 Firewall Sealant is a high temperature two-part, synthetic rubber compound primerless firewall sealant. It has a service temperature range from -65°F (-54°C) to 400°F (204°C, with withstand flash temperatures of 2000°F (1093°C). The material is designed for sealing firewall structures against the passage of air and vapors.The uncured material is a low sag paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant to common aircraft substrates. Its storage life is at least 12 months when stored at temperatures below 80 °F ( 27 °C) in original, unopened containers. Meets MIL-S-38249 TYPE 1 and AMS3374 Type 4. Alternates with CS1900 and PRS12. Black color. Supplied in a two-part can kit and two-part SEMKIT® injection kits. HAZARDOUS MATERIAL.

Please refer to the attached documentation for additional information.

PPG AEROSPACE® Corrosion Inhibitive Aircraft Sealants & Jointing Compounds include different products offered in different packings.

PPG AEROSPACE® P/S (Pro Seal) 870 Corrosion Inhibitive Sealants are two-part, manganese dioxide cured polysulfide compounds.  They have a service temperature range from -65°F (-54°C) to 250­°F (121°C), with intermittent excursions up to 275° (135°C). They act as an effective barrier against the common causes of corrosion on the aluminum alloys or between dissimilar metals. The cured sealant maintains elastomeric properties after limited exposure to both jet fuel and aviation gas. Offered in A, B & C classes.

P/S 870 Class A uncured material is suitable for application by brush in thickness up to 25 mils. It cures at room temperatures to form a resilient sealant having excellent adhesion to common aircraft substrates. Supplied in two-part kits and Semco® cartridges.

P/S 870 Class B uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. Available in two-part kits or Semkit® cartridges. 

P/S 870 Class C uncured material is designed for roller and faying surface sealing applications. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. Available in two-part kits and Semco® cartridges.

PPG AEROSPACE® Proseal P/S 890 Class A and B are aircraft integral fuel tank sealants. They have a service temperature range from -65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). Proseal P/S 890 Class A is designed for brush and fay sealing of fuel tanks and other aircraft fuselge sealing applications. Proseal P/S 890 Class B  is designed for fillet sealing of fuel tanks and other aircraft fuselage sealing applications. The cured sealants maintain excellent elastomeric properties after prolonged exposure to both jet fuel and aviation gas.  Both are two-part, manganese dioxide cured polysulfide compounds. In the case of Proseal P/S 890 Class A, the uncured material is suitable for applicaiton by brush in thickness up to 25 mils. In the case of Proseal P/S 890 Class B, the uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. Both cure at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. PPG AEROSPACE® Proseal P/S 890 Class A and B  sealants are supplied in two-part kits and Semco® cartridges.

PPG AEROSPACE® JC5A Corrosion Inhibitive Jointing Compound is a versatile one-part, non-curing compound designed specifically for the aviation industry. Engineered to prevent corrosion and moisture ingress, JC5A is ideal for safeguarding removable fasteners and assemblies. 

Please refer to the Product Description section and the supplied documentation for additional information.

PPG Aerospace manufactures and provides a unique group of products including aircraft windshields and windows to the commercial, regional, military and general aviation segments, aircraft coatings and sealants for aircraft structures. 

PPG AEROSPACE® wide range of primers, surfacers and fillers are designed to cover a broad set of needs. Extensive colour sets and different packings are offered, enabling enhanced productivity. These work with any kind of equipment, providing flexibility and ease of use. 

PPG AEROSPACE® range of primers are always aligned with CMSs' most stringent requirements. They are designed to ensure an optimum repair finish but also durable mechanical performance to be able to resist heavy-duty usage in certain applications and include:

Etch Primers designed for excellent corrosion resistance and adhesive properties over metal substrates, such as steel, galvanised steel and aluminium.

Wet-on-Wet Primers for optimum process speed and excellent appearance.

Primer Surfacers and Fillers designed to achieve film build to fill scratches and provide a level surface. They provide a good gloss hold-out over a wide range of substrates including sound original paintwork, bare steel, polyester bodyfillers and etch primers.

Epoxy Primers dedicated to provide the best possible durability and corrosion resistance.

PPG AEROSPACE® Desothane® HS range of polyurethane and epoxy topcoats cover both civil aviation and military aircraft applications. 

 For additional information on our offered PPG AEROSPACE® products please consult the Product Description section and the supplied documentation.

For more than 50 years, PPG AEROSPACE® – PRC-DeSoto® has been a leader in the development of products fundamental to aerospace manufacturing, maintenance, and repair. The company manufactures and provides a unique group of products including aircraft windshields and windows to the commercial, regional, military and general aviation segments as well as aircraft primers, coatings and sealants for aircraft structures used in aviation and milirary applications. In addition, high performance Industrial Adhesives and Sealants  are also offered to provide protection from fuel and petroleum exposure as well as sealants for Telecom and Utility applications.

PPG AEROSPACE® – PRC-DeSoto® products are offered in different classes, specifications, application times and convenient container options including SEMCO Semkit® packages containing both the base and accelerator in one pack.

3 classes are generally used for the classification of sealants (A, B and C) although an S class does apply in some cases where a sealant can be sprayed.

Class A – Brush application, generally used on fasteners

Class B – Thicker consistency, used for fillet and injection seals

Class C – Thinner than Class B, used for fay sealing

Application times are expressed in hours (2 indicating 2 hours 1/2 indicating half an hour).

PPG AEROSPACE® integral fuel tank sealants for aerospace applications are high-performance products designed to provide long-lasting protection and sealing for aircraft fuel tanks. These sealants, such as the PR-1422 and Pro-Seal 890 were the first fully jet fuel resistant sealants. They offer excellent adhesion, flexibility, and resistance to fuels, oils, and other chemicals. They ensure leak-proof integrity under various temperature and pressure conditions, contributing to the overall safety and efficiency of aircraft operations. 

PPG’s Aircraft Fuel Tank Sealants are included in this presentation while respective Aircraft Fuselage, Firewall Sealants and Corrosion Inhibitive Sealants and Coatings are separately presented.

For additional information on offered products please consult the Product Description Section and the supplied documentation.

Manufactured by RADCO INDUSTRIES, RADCOLUBE® is an exceptional 3-in-1 Gun Oil for cleaning, lubricating, and short-term preservation of small and large caliber firearm platforms making their maintenance safe & convenient. With its advanced formulation and adherence to industry standards, this gun oil guarantees superior performance, reliability, and longevity for firearms used in diverse environments. It is the trusted brand of the US Military, Law Enforcement, and Competitive Shooters across the globe. RADCOLUBE® CLP Gun Oil 3IN1 is also the preferred firearm cleaner and lubricant of The Tactical Games™ (TTG) , Multi-Gun Competitors, Extreme Long Range Shooting Organization™ (ELRSO) and King of 2 Mile™ (KO2M) shooting organizations.

RADCOLUBE® CLP keeps small & large caliber weapons in optimum condition and can be used in harsh environments, including cold, salt & dust. It maintains maximum firing performance maintaining any weapon’s maximum firing rate without incident.

Being a Military-Grade CLP gun cleaner and lubricant, RADCOLUBE® CLP  addresses all aspects of the cleaning process, simplifies firearm maintenance, adheres to MIL-PRF-63460F specifications and meets the qualifications of DOD.

RADCOLUBE® CLP has a maximum recommended shelf life of 6 years from date of manufacture.

For additional information please consult the supplied documentation.

SHANGHAI HANSI INDUSTRIAL CO. (HANSI) is an adhesive producer with a wide product range of polyurethane and epoxy adhesives, acrylate and water-based adhesives, silicone adhesives and respective hardeners. HANSI adhesives are used in an extensive range of applications including aerospace, automotive, electronics, construction, transportation, filter, sound insulation and composite.

HANSI high performance solvent free two component epoxy resin adhesives can be used for bonding and sealing of large-area composite panels of metal and non-metal materials. They exhibit high strength and toughness and thermal shok resistance. Their VOC content makes them more environmentally friendly and safe. Different series include:

MegaGlue® 2003/5112/3042/ 45121V Series & ACROBOND® EP242 Series. Products in these series are widely used and feature good toughness, wide temperature application range and moderate activation time which can reduce VOC emissions, reduce weight and energy consumption.

MegaGlue® 4001/4001CM Series. Products are high viscosity fast curing toughened two-component epoxy based adhesives. They can be used for bonding and sealing of FRP, SMC, CGRP and other composite materials in rail transportation, automobile, aerospace and other industries. Mostly selected for their high strength and toughness and their fast curing.

MegaGlue® 3003/3010 Series.  Products in these series include toughened two-component epoxy based adhesives with high viscosity and fast curing. Used in surface repairs, edge sealings and landfilling in rail transportation, ship, van and other industries.

Depending on the selected product, HANSI MegaGlue® epoxy resin adhesives are offered in 50ml/400ml cartridges, 15 kg buckets or 20 kg barrels.

For additional information on HANSI MegaGlue® epoxy resin adhesives please consult the supplied documentation or contact us.

SHELL® extensive range of industrial lubricants, including their GTL (gas-to-liquids) technology oils, highlight the difference between industry standards and industry-leading performance. 

SHELL® range of industrial lubricants include lubricating oils for a variety of applications, hydraulic oils, coolants and greases.

SHELL® lubricating oils can be used on turbines (TURBO turbine oils separately presented), rotary and reciprocating compressors (CORENA), stationary gas engines (MYSELLA), power-generation (ARGINA & GADINIA), transformers (DIALA), axle, gear and transmission systems (SPIRAX ), slideways (TONNA), as bearing & circulating oils (MORLINA), process oils (RISELLA X) as well as for worm drive gears (OMALA). TELLUS hydraulic oils, Coolants and GADUS greases are also offered as part of SHELL® range of industrial lubricants. They are briefly presented in the Product Description section while further information can be obtained through the supplied documentation.

The SHELL® Gadus range of industrial greases (formerly SHELL® Alvania) include Gadus “S” high performance, multi purpose greases  and the latest extreme temperature “T” polyurea synthetic speciality greases designed for the most severe extreme-temperature and long-life applications.They have been designed to deliver the best value through long grease life, system efficiency, and enhanced wear protection enabling equipment operators to bebefit from Gadus greases' thickener type, oil viscosity, operating conditions and application and their NLGI grade (consistency) selecting the grease that will deliver optimum value to their operations. From greases that offer reliable performance for standard applications to specialist low noise, high-temperature and heavy-load greases,  there is a Shell Gadus product that can help to optimise your system’s efficiency and costs of operation.

For more information on SHELL® Gadus greases please refer to the Product Description section and the supplied documentation.

SHELL® TURBO® Turbine oils are premium quality lubricating oils designed to provide excellent lubrication of precision turbines and many other industrial applications. Made from severely hydroprocessed (API Group II) base oils carefully selected to provide satisfactory viscosity/temperature characteristics, low foaming tendencies and good water separation properties. In addition, they contain proven additives to protect equipment against rusting and to resist oxidation for long service life.

From high-temperature gas turbine systems to combined-cycle systems with integral gearing, the SHELL® TURBO® range of turbine mineral and  GTL (gas-toliquids) technology (*) oils are designed to protect the equipment from the effects of corrosion and to minimise the build-up of deposits and lacquer in turbine bearings and control valves.

Shell Turbo Oils T meet the American Standards Institute (ANSI)/American Gear Manufactures Association (AGMA) 9005-D94 requirements for R&O oils. They also coply with STLE Standards for machine tool lubrication include a classification for Hydraulic Fluid and General Purpose Lubricants.

The SHELL® TURBO® includes:

SHELL® Turbo T Mineral Turbine oils featuring reliable performance and protection. Available in ISO 32, 46, 68 and 100 viscosities.

SHELL® Turbo J Mineral Turbine oils  satisfying requirements of MHPS steam and gas turbines. Available in ISO 32 viscosity.

SHELL® Turbo S4 X and S4 GX GTL Turbine oils.The Turbo S4  X exhibits extended oil life and efficiency. Available in ISO 32 viscosity. The Turbo S4 GX is specifically formulated to provide additional protection for gearboxes in turbine systems that require enhanced anti-wear performance from oil . Available in ISO 32 and 46 viscosities.

For additional information please refer to the Product Description section and the supplied documentation.

(*) Shell gas-to-liquids (GTL) technology offering various benefits over traditional group II/III base oils such as a lower sulphur content than fluids derived from crude oil, a more uniform chemical structure, contributing to reliable performance and others.

SHELL® extensive range of automotive lubricants includes engine oils for a variety of applications in cars, motorcycles as well as trucks and light or heavy duty vechicles.

SHELL® HELIX Fully Synthetic Motor Oils are manufactured from 100% synthetic base stock and high quality additives to achieve higher performance levels than both synthetic technology and mineral oils. To these high-quality synthetic base oils SHELL® proprietary Active Cleansing Technology is added to create a motor oil that helps provide superior cleansing and protection for today’s engines. SHELL® HELIX oil types include Semi Synthetic Motor Oils, Mineral Motor Oils, High Mileage Oils, Diesel Motor Oils and  ECT Oils.

SHELL® ADVANCE portfolio of motorcycle engine oils consists of  4T, 2T motorcycle and scooter oils. Their key benefits include zero loss in horsepower, fuel economy and longer drain intervals.

SHELL® RIMULA Light Duty range of oils is designed for light duty trucks. With Dynamic Protection and Dynamic Protection Plus Technology (included in Grade LD5), they protect against engine wear and tear caused by each stop and start in daily operations. The high performance additive package contains anti-oxidation components for a longer oil life in vehicles operating under high idle engine conditions. Dispersants in the additive package help break down soot and deposit build-up regardless of the type of load carried.

SHELL® RIMULA Heavy Duty engine oils offer outstanding wear protection with reduced viscosity for improved fuel economy, acid and deposit protection and wear control.

Further information can be obtained through the supplied documentation.

Αutomatic lubrication systems  (aka lubricators) provide the appropriate lubrication quantity at the correct intervals, minimizing friction and wear and optimizing bearing and machinery service life. Automatic lubricators are installed on single lubrication points and automatically dispense the proper amount of lubricant to the application. Especially when lubrication points are difficult to access for safety reasons or their location in the plant, automatic lubricators can offer the solution.  Lincoln (part of SKF Group)  automatic lubrication systems and accessories' portfolio includes Centro-Matic®‚ Quicklub®‚ Modular Lube®‚ Helios®‚ Duo-Matic® and ORSCO® brands offering a solution for most lubrication points. Main benefits from the use of   Lincoln automatic lubricators include:

Increased worker safety for lubrication of difficult to access lubrication points,

Maintenance efficiency with automated lubricant supply,

Improved machine reliability with optimized lubricant supply,

Selection of lubricators type and lubricant for application needs from a wide product portfolio.

For additional information please consult the supplied documentation.

ZOK are powerful water-based gas turbine compressor cleaners and corrosion inhibitors produced by SOLIDUS INDUSTRIES. ZOK products are also offered with pH neutral and an effective corrosion inhibitor (ZOK 27) and with a higher pH without the added corrosion inhibitor (ZOK MX) for more challenging cleaning requirements. Originally developed for the UK Ministry of Defence over 40 years ago, ZOK 27 is used all over the world today within the Aviation, Marine, Power Generation, Oil and Gas and Industrial sectors. Regular on-line and off-line washing with ZOK 27 produces outstanding results in gas turbine engine performance: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – ultimately maximising the ROI on gas turbines.

ZOK 27 products are offered in two standards (ZOK 27 and ZOK 27 GOLD. The latter includes neutral, biodegradable, water-based gas turbine compressor and gas path cleaners specially formulated with plant based surfactants to meet ecological sustainability.

SOLIDUS INDUSTRIES ZOK 27 Gold Standard have been designed to meet the requirements of the OSPAR Convention for reduced environmental impact in sensitive marine environments, such as the North Sea. This scheme is administered by Cefas in the UK. They consist the perfect solution for maintaining peak performance of gas turbine compressors operating in ecologically sensitive environments. Regular on-line and off-line washing with ZOK 27 Gold Standard produces outstanding results: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – all this while minimising  environmental footprint.

ZOK 27 and ZOK 27 Gold Standard  are available as CONENTRATED (CNCTR) and READY TO USE (RTU) product versions in different packing options, 12.5 liters (3.3 USG) cans, 25 liters (6.6 USG) cans, 210 liters (55 USG) drums and 1000 liters (264 USG) IBC containers.

ZOK 27 READY TO USE (RTU) versions are intended for users who do not have access to demineralised water. CONENTRATED (CNCTR) vesrions can be diluted 1 to 4 with water before use (20% solution). Demineralised water (<11μS/cm conductivity) should be used for hot/on-line cleaning. Good quality drinking water (<500μS/cm conductivity) may be used for cold/off-line cleaning.

Please also refer to the attached documentation for additional information on these products.

The SWAGELOK® Company is a global supplier of a range of products including fittings, valves, hoses, regulators, medium- and high-pressure products, process instrumentation, quick-connects, measurement devices, tubing and tools, filters, sample cylinders, MPC modular systems, pre-engineered subsystems (PrESS), welding systems, leak detectors, lubricants, and sealants.

SWAGELOK® Goop™ thread lubricants reduce installation time by easing the assembly of leak-tight thread connections for a variety of metals and alloys. Oil-based BLUE Goop® thread lubricants can be used on stainless steel, steel, titanium, aluminum, and nickel based alloys for temperatures up to 400° F (204° C). Halcocarbon based PURE Goop® can be used on titanium, stainless steel, steel, and nickel based alloys for temperatures up to 350° F (176° C) while Oil-based SILVER Goop® thread lubricants can be used on stainless steel, and high temperature alloys for temperatures up to 1500° F (815° C). Offered in different packaging options: 1 oz. (29.5 cm3) tubes (PURE/SILVER Goop®), 2 oz. (59 cm3) tubes (BLUE Goop®) and 1 lb. (450 g) cans (BLUE/PURE/SILVER Goop®). According to the selected product, they resist or prevent galling. 

SWAGELOK® Snoop® liquid leak detectors detect gas leaks in hard-to reach areas. They are non-corrosive and non-flammable. Contain corrosion inhibitor for added protection. SWAGELOK® Snoop® liquid leak detectors can be used over a temperature range of 27° to 200° F (-2° to 93° C). For lower temperatures, –65°F (–54°C) SWAGELOK® Real Cool Snoop® liquid leak detectors can be used. Offered in different containers: 2 fl oz./59 ml (Snoop®), 8 fl oz./236 ml (Snoop®/Real Cool Snoop®) and 1 gal/3.8 l (Snoop®/Real Cool Snoop®).

SWAGELOK® also offers SWAK™, PTFE Tape, and PTFE-Free pipe thread sealants. For more information on SWAGELOK® products please refer to the supplied documentation. 

TIODIZE Co., Inc. is an advanced technology company specializing in the development, manufacturing and application of composite products and advanced coatings. Their composite product range includes FIBER/LITE® fasteners and fastening devices maintaining high tensile, shear and fatigue strength at temperatures to 700°F and TRIBO/COMP® self-lubricating bearing materials with an unequaled wear life and a high strength to weight ratio.TIODIZE coating product portfolio includes corrosion & emissivity coatings, dry-film lubricants and anti-seize products as well as a range of Green, environmentally compliant non-hazardous cleaners and lubricants meeting EU REACH Regulation requirements for the sports, consumer and racing markets, such as their  ALUMAZITE® family of aluminum pigmented corrosion inhibiting coatings. 

TIODIZE® TIOLON® and TIOLUBE® families of products are advanced anti-friction, anti-wear, MIL-spec quality dry film lubricants for static and dynamic conditions. Their product lines include TIOLON® PTFE (Teflon®) and TIOLUBE®  MoS2 (Molidisulfide) organic and inorganic, low VOC and water based dry films suitable for different operating temperature applications.Their dry-film lubricants are utilized in almost any application that involves lubrication for friction and wear or  barriers for galling and corrosion in an increasingly broad spectrum of industries including aerospace, automotive, marine and electronics.

For more information on TIODIZE products please refer to the Product Description section and the supplied documentation.

The new and improved QUARTZ range  by TOTALENERGIES (formerly TOTAL) offers a comprehensive choice of engine oils for every vehicle including formulated oils for use in diesel engines and older vehicles. Three cutting-edge technological improvements enable better car engine care, protection and cleanliness while, at the same time, reducing maintenance costs and improving fuel economy.

ECO SCIENCE technology helps the engine to resist physical and chemical degradation for an extended engine life, while maximizing performance and scoring high in fuel economy.

AGE RESISTANCE technology (ART) prevents engine's  wear and tear, abrasion and oil oxidation even at extreme temperatures through a unique combination of hyperactive molecules and anti-wear additives.

CLEAN SHIELD technology integrated in QUARTZ engine oils captures all dirt, dust and soot in the engine, preventing sludge formation and ensuring cleanliness and reduced maintenance costs in the long run.

QUARTZ range of engine oils now features exciting new packaging. QUARTZ product range includes:

Quartz 9000, a synthetic oil providing superior levels of engine performance and protection. It also provides TOTALENERGIES' highest levels of engine cleanliness. Quartz 9000 is long-lasting, extending intervals between oil changes.

Quartz 7000, a synthetic-based oil that provides enhanced driving comfort and high levels of engine cleanliness and protection.

Quartz 5000, an improved mineral oil that can be used in older as well as more recent vehicles.

Quartz 3000, a mineral oil suitable for older cars that can't use other oils from the range.

Quartz INEO, a synthetic oil with pollution control, specially formulated for use with diesel engines. Quartz INEO provides exceptional engine cleanliness and supports particulate filter performance.

Quartz with ART  (age resistance technology) which improves the engine's ability to withstand mechanical ageing. 

Key benefits from the use of TOTALENERGIES QUARTZ engine oils include:

Protection against all the causes of wear by reducing friction and corrosion

Prevention of engine overheating

Ensuring good cylinder compression and maximum engine efficiency 

Ensuring engine cleanness by preventing the deposit of various impurities

Additional information are available in the Product Description section.

Note: Supplied information is provided for reference only. For the selection of the suitable motor oil please observe the manufacturer's instructions.

TOTALENERGIES (formerly TOTAL) AeroGear 823 is an extreme pressure mineral oil for helicopter gears.

It features excellent resistance to high loads and shocks, anti-corrosion and anti-rust as well as antifoaming capabilities.

It is intended for lubrication use of highly stressed helicopter gears.

TOTALENERGIES AeroGear 823 is certified by DCSEA 255/A and EUROCOPTER and conforms with the following specifications:

- US: meets MIL-PRF-6086E (Medium grade)*

- UK: DEF-STAN 91-112/1*

- Joint Service Designation: OEP-70

- NATO code: O-155.

Offered in 5-liter containers and drums.

For additional information please contact us.

TOTALENERGIES (formerly TOTAL)  has developed a comprehensive range of Hydraulic Oils included in HYDRANSAFE product family. 

HYDRANSAFE HFA E3 and HFA S5 are intended for use in hydraulic systems in Aviation, Steel, Metalworking, Energy, Chemicals, Food processing, Textile, Automotive Manufacturing, Wood and Paper, Cement & Materials, & Mining sectors. Can be used on hot pressing machines and systems specially designed for low-viscosity aqueous fluids. Operating temperatures: +5 °C to +55 °C. HYDRANSAFE HFA E3 features an excellent stability overtime, good antiwear properties, excellent anti foam properties, good anti-corrosion, anti-rust properties even with a soft water, and good resistance to bacterial growth. HYDRANSAFE  HFA-S5 solution has a very low foam tendency and is compatible with the usual type of elastomers used in HFA type of hydraulic installations (ISO 6072 NBR and FKM). Provides excellent protection against corrosion to metals normally used in hydraulic systems (ISO IP 287) and features a high resistance to bacterial and fungal growth. Its durability reduces maintenance - with service intervals longer than mineral oil based HFA emulsions (type HFAE fluids).

HYDRANSAFE HFC-E 46 & HFC-E 68 are non flammable (fire resistant) & biodegradable  water based hydraulic fluids, boosted in antiwear and anti corrosion additives to match mineral based performances on pump tests and replace standard mineral oils with equal equipment protection. Both are intended for use in applications in Steel, Automotive Manufacturing, Mining, Aluminium, Construction Equipment and Mining industries. Designed to work on all kind of hydraulics pumps in various conditions, in mobile and stationary equipment. Ultimately biodegradable to facilitate usage in sensitive areas such as undergournd mining, agriculture, tunelling etc. they provide superior fire protection compared with standard HM or HFDU oils without compromising mechanical performances. They absorb water enabling usage in environments subject to high water contamination.

HYDRANSAFE HFDU 46, HFDU 68, and HFDU LC 168 Biodegradable hydraulic oils are recommended in the event of incidental leaks into the environment. They feature  considerable fire resistance, and exceptional lubricating properties which guarantee a substantial reduction in wear, and therefore a longer service life of the hydraulic components. They exhibit a high flash point and high spontaneous ignition temperature, low pour-point providing good performances at low temperature, very good anticorrosion properties enhanced service life, and a very high natural viscosity index guaranteeing a viscosity constantly adapted to the temperature range in which the fluid must be used. Operating temperature: -10 °C to +70 °C on a continuous basis, +120 °C at peak periods.

For additional information please consult the Product Description section and the supplied documentation.

ZET-CHEMIE® brand relates to a broad range of lubricants, cleaners and corrosion protection products for metal processing developed, manufactured and distributed by by ZET-CHEMIE GmbH for 30 years.

ZET-CHEMIE® water-miscible cooling lubricants are based on mineral oil-containing emulsion concentrates or mineral oil-free solutions. They have been used many years successfully for processing all kinds of materials. Their cutting and grinding oils are based on mineral or syntethic base oils and can be used in both chip and non-cutting metal machining processes. 

ZET-CHEMIE® corrosion protection products provide plants and components with the best corrosion protection depending on the application requirements.

ZET-CHEMIE® metal cleaners effectively address requirements for cleanliness of components in metalworking. 

ZET-CHEMIE® range of industrial lubricants can be used in a wide range of applications. 

HLP hydraulic oils feature good demulsifying properties, high stability against ageing and wear protection. They correspond to DIN 51524 Part 2. Available in the viscosity range ISO 2 – 150. HLP-D hydraulic oil conforms to DIN 51524 Part 2 with excellent detergent and dispersion features, plus wear protection. Available in the viscosity range ISO 68 – 150. 

CLP high-performance industrial gearbox oils are suitable for all industrial applications. They correspond to DIN 51517 Part 3. Their load stage is greater than 12. Available in the viscosity range ISO 5 – 680.

CGLP sliding track lubricating oils are suitable for tracks and guide rails. Their good demulsifying properties prevent them mixing with cooling lubricants. Correspond to DIN 51502 CGLP. Available in the viscosity range ISO 32 – 460.

VDL ZET-compressor oils with low evaporation losses and high stability against ageing conform to DIN 51506 VDL. Used in reciprocating and rotary lobe compressors according to the manufacturer’s instructions. Available in the viscosity range ISO 68 – 150. 

ZET-CHEMIE®  paraffin-based machine oils can be used for lubricating spindles in tooling machines. Transparent and resistant to oxidation. Available in the viscosity range ISO 2 – 32. 

ZET-CHEMIE® product portfolio also includes multi-purpose, fluid, bearing, high temperature and silicon greases in all NLGi classes and all container sizes from cartridges through to drums.Also car oils for petrol or diesel engines and trucks with EURO IV emission limits.

For additional information please refer to the supplied documentation.

AIRGO 3001 is a trademark of ZF Friedrichshafen AG. It is a high-performance gearbox oil designed for use in automatic transmissions with an outstanding oxidation and friction stability.