AIRPRO INDUSTRY CORP. manufactures professional quality air tools, hand  & auto repair tools and accessories for professional applications under  the brand name AIRPROWU. AIRPROWU extensive product line ranges from aircraft tools to industrial, automotive/motorcycle ,tooling/molding, construction and auto body shop solutions and solutions for electronic assembly lines. AIRPROWU compression riveters include different models covering different capacity requirements for aluminum and steel. They come in different dimensions and are  offered with matching yokes to cover various application needs. Please refer to the specifications of individual compression riveters.

Rivet Pin Gauges from HI-SHEAR CORPORATION,  subsidiary of LISI AEROSPACE, can be used for inspection or measurement of correct grip length of HI-LITE™ / HI-LOK™ rivet pins. Different HI-SHEAR Pin Protrusion Gauges are offered for respective HI-LITE™ / HI-LOK™series pins. HI-SHEAR Grip Gauge Assemblies can be used to measure the “grip length” of HI-LOK™ and HI-LITE™ pins, shear lockbolts, structural screws and bolts. The HI-SHEAR 2-651 Grip Gauge Assembly includes one HI-SHEAR 2-612 Grip Gauge & one HI-SHEAR 2-615 Grip Gauge Slide. The 2-612 Grip Gauge measures in increments 1/16” to 3”(1 mm to 75 mm). Made from spring temper stainless steel, 3/4" x 6-1/4".

RAPCO produces quality FAA-PMA approved replacement organic and metallic brake linings for Cleveland and McCauley brake assemblies on most general aviation aircraft. Organic linings are actually made from a semi metallic mix. RAPCO combines brass, copper and Kevlar fibers with a high temperature binding compound to provide outstanding performance and long service life. Most RAPCO organic linings have a built in wear indicator, which reduces the risk of damage to the brake disc and helps to optimize lining life. RAPCO organic linings are available in boxes of 10 or in organic lining kits containing the proper number of linings and rivets necessary for replacement on Cleveland or McCauley brake assemblies. They are convenient to have on hand when the need for relining occurs. Metallic lining replacements for the Cleveland brake assemblies are made of sintered steel, a specially developed process that fuses metallic particles to a steel carrier plate. RAPCO metallic linings offer long life and excellent braking performance.

RAPCO Brake Rivets are FAA-PMA approved quality tubular rivets produced from plated steel for mounting aircraft brake linings. The RAPCO RA825 Rivet Tool Kit is recommended for proper installation.

Please refer to the attached Application Guide for additional information.

HOWMET® AEROSPACE Inc. (formerly ARCONIC Inc.) develops and manufactures high performance, engineered products and solutions for the aerospace, industrial gas turbine, commercial transportation and oil and gas markets. HOWMET® FASTENING SYSTEMS product range under different brands offers the greatest breadth and depth of fastening solutions available including self-locking nuts, quick-release fasteners, draw latches, threaded inserts, lock-bolts, and structural blind fasteners.

HOWMET FASTENING SYSTEMS structural blind fasteners and lockbolts (including those under HUCK® brand) are designed to provide permanent, vibration-resistant, superior-quality joining solutions for use in aerospace and industrial applications. Suited for applications where the joints are integral to the structure, they offer high tensile, shear & clamp properties.  For additional information please refer to the Product Description section and the supplied documentation. Installation tool systems (separately listed) are also offered.

Jo-Bolt is a trade name for an internally threaded three-piece rivet. A Jo-Bolt consists of three factory preassembled parts, a threaded steel alloy bolt, a threaded steel nut, and an expandable stainless steel sleeve. During installation the bolt is turned while the nut is held. This causes the sleeve to expand over the end of the nut, forming the blind head and clamping against the work. When driving is complete, a portion of the bolt breaks off. The high shear and tensile strength of the Jo-Bolt  fasteners makes them suitable for use in high-stress applications where some of the other blind fasteners would not be practical. Other advantages include their excellent resistance to vibration, weight saving, and fast installation by one person. Jo-Bolts are often encountered in the permanent structure of late model aircraft, in areas which are not often subjected to replacement or servicing. Manufactured to different aerospace standards such as NAS 1669, 1670, 1750, or 1751 they are offered as OEM parts of their respective producers or as respective Standard part numbers under our own labelled (AVIATIONEU NEW ERA) product lines.

ZEPHYR TOOL GROUP (aka ZEPHYR Manufacturing Co.) is a manufacturer of highest quality assembly tools and tooling systems for the aerospace, automotive, and manufacturing industries. ZEPHYR TOOL GROUP product ranges include assembly tools, maintenance tools, fastener installation and removal tools for the aerospace market, power tool accessories for use in the general industrial tool industry, and commercial products. Brands within their family of tools and products include ZEPHYR Aerospace, ZEPHYR Industrial, KWIK-LOK, LOK-FAST, U.S. INDUSTRIAL TOOL (USIT), HSTOOLING  and MARTIN Aircraft Tools.

U.S. INDUSTRIAL TOOL (USIT) 114 series C-Type compression riveters can be used for assembly operations in aircraft, automotive, truck, bus components, boats, metal furniture, toys, electronic chassis & appliance assembly. One man operated, USIT rivet squeezers increase productivity securing high joint integrity with no dependance on operator's skill level. Available in standard and high output configurations. CE certified. They feature tandem cylinder doubling compression force available from tool, rolling cam and wedge assembly multiplying compression force of piston, "squeeze" action with throttle controllable speed allowing easy control, exceptional accuracy and uniformity & swivel air inlet aiding maneuverability. They develop full squeezing force at 90 P.S.I. 

AIRPRO INDUSTRY CORP. manufactures professional quality air tools, hand  & auto repair tools and accessories for professional applications under  the brand name AIRPROWU. AIRPROWU extensive product line ranges from aircraft tools to industrial, automotive/motorcycle ,tooling/molding, construction and auto body shop solutions and solutions for electronic assembly lines. AIRPROWU product line of Hydraulic Riveters include pneumatic, industrial hydraulic, air hydraulic riveter tools and others. Please refer to the specifications of individual riveters.

Structural screws are made of alloy steel, are properly heat treated, and can be used as structural bolts. Those commonly used in aircraft applications are manufactured to aerospace/military standards/specifications. They are offered as part of our own branded (AVIATIONEU NEW ERA) product lines structured in different series based on the standard of their conformance. Some of the screws commonly used include NAS204 through NAS235 and AN509/AN525 series. 

MS24694 Series structural screws have a 100° countersunk Phillips head. They replace the respective AN509 series structural screws of materials and finishes. Minimum tensile strength for steel is 125,000 psi. They are fabricated from alloy steel and cadmium plated per specification QQ-P-416A, Type II, Class 3 or 300 Series Stainless Steel unplated designated by the letters "S" and "C" respectively in the product part number after MS24694 and before the size number.

Sourced from quality suppliers, AVIATIONEU NEW ERA MS24694 series structural screws are offered in different thread sizes and lengths in inches and sold in pieces or packs of specified number of screws designated after the letters "PK" in the product reference number (SKU). For more information, please refer to the individual product presentations, the supplied documentation or contact us.

Solid shank rivets are relatively low-cost,  permanently installed fasteners used as structural parts in aircraft and other applications where reliability and safety consist a priority.  These rivets are produced in accordance with military and other international standards such as US Army-Navy (AN) standard and Mil-Spec (MS) that followed. AN426/MS20426 and AN470/MS20470 Series rivets are solid aluminum rivets with countersunk head or universal head respectively. Sourced from quality suppliers they are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They are  available in different diameters and lengths and sold by the pound (lb). Those designated by the letter "A" in their part numbers are "soft" rivets fabricated from 1100-grade aluminum with a tensile strength of 16,000 PSI while rivets designated by the letters "AD" are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI. For additional information please refer to the article on an overview of our fasteners, other supplied documentation, the individual product presentations or contact us.

Rivet cutters of different types are commonly used in Aerospace and many industrial applications. These quality heavy duty tools are made by different manufacturers mostly in hand-held but also in bench mounted versions and can be used for cutting rivets of aluminum and other materials od different diameters and lengths. Some of them are briefly presented below.

ATI® TOOLS 501 series aerospace heavy duty rivet cutters are designed to quickly and easily shear aluminum rivets. They are adjustable for 1/4˝ to 3/4˝ long rivets in 1/16˝ increments. Available in two models with standard handle (ATI 501R) and long handle (ATI 501S).

The RC-1 heavy-duty rivet cutter manufactured by LANCASTER PUMP is designed to mount onto a workbench (or held in vice), and will cut five (5) different diameter rivets, wire, and screws to any of seven (7) different lengths. It is made of hardened steel and the cutting surfaces are ground to exacting tolerances for consistently clean, distortion-free cuts. Accepts diameters: 1/16", 3/32", 1/8", 5/32", and 3/16". Cuts lengths: 5/32", 7/32", 9/32", 11/32", 13/32", 15/32", and 17/32". Shipping weight 3 lbs ( appr. 1.5kg).

For more information on these tools please consult the supplied documentation or contact us.

ATI® TOOLS ATIST1111BK3 anti-slip rivet set, H13 magnetic particle tested. Manufactured to Boeing® specifications. It features polyurethane rim to prevent slipping and damage to skin surfaces. Shank diameter 0.401". Length 2-1/2″. Face diameter 1-1/4″.

Countersinking is used to ensure that flat head screws or fasteners sit flush against the workpiece. JITTERBUG Pilot Countersink Cutters can be used with flush rivets in different countersinking applications. They consist cost effective alternatives to other brands. They are available separately or in convenient sets of different pilot diameters. Offered sets include 6 pieces (1/4 5/16 3/16 5/32 3/32 1/8 in.) or 4 pieces (3/16 5/32 3/32 1/8 in.) per set. For additional information please consult the supplied documentation or contact us.

HI-SHEAR Fasteners are patented fasteners of HI-SHEAR CORPORATION (Patent Holder), subsidiary of LISI AEROSPACE, a manufacturer of advanced aerospace fasteners and installation equipment used in space, military and commercial vehicles. Depending on the fastener, they are made by quality fastener manufacturers (licensees) in different  countries including but not limited to LISI AEROSPACE companies, HOWMET ALCOA / SIMMONDS / FAIRCHILD, PCC  SPS, and others. 

HI-SHEAR nuts and collars are designed to fit with their related HI-LOK™/HI-TIGUE™ and HI-LITE™ pins  (separately presented) forming the respective fastener system. HI-LOK™ nuts and collars are designed to fit HI-LOK™ & HI-TIGUE™ pins. HI-LITE™ nuts and collars are designed to fit HI-LITE™, PULL-IN™, PULL-STEM™ & TAPER HI-LITE™ pins.

With a wide range of shapes, materials and coatings, they are suited for most of structural assemblies and are commonly used in the aerospace industry in tension and shear applications. Collars’ wrenching element is designed to break-away at a controlled preload. It has been tested over time and has proven its reliability when installed with non-torque-controlled tools. Main features of nuts and collars include:

- controlled preload

- wide variety of materials and coatings for installation in all structures

- suitable for shear or tension applications, with captive washer, self-aligning or self-sealing options

- limited access installation, using conventional tooling

- designed with a counterbore to fit nominal and oversized pins

- nuts allow customized torque and preload & low height design for low access areas

Please refer to the supplied documentation for additional information.

ATI® TOOLS 107A series flush straight drive rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. Large radii at critical points enable these rivets to withstand continuous rugged use.They are slightly crowned with a highly polished face designed for rapid flush riveting where a smooth skin surface is essential and feature large radii at critical points to prevent breakage, protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Shank diameter 0.401".  Different sizes are available serve specification requirements for face diameters and lengths.

Blind rivets (also commonly referred to as POP Rivets) are mainly used in applications where there is no access to the rear (blind side) of the joint. Rivets have a two-piece construction, the rivet body, shell, or hat and the stem or mandrel. Both the hat and mandrel are pre-assembled and ready to use. Rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint. Upon reaching the designed clamping force, the mandrel snaps and is discarded. They come in different materials, sizes, military or industrial standards, can be installed with the use of a riveting tool and cover a wide range of structural and non structural applications. A benefit of blind rivets is that they are not material specific and therefore they can be used to combine two different material types together. Furthermore, there is no way to over or under-torque a rivet. If the appropriate diameter and grip range are chosen correctly, the rivet will be installed perfectly every time.

Non structural break mandrel blind rivets are offered as part of AVIATIONEU NEW ERA product lines. They are produced in accordance with the DIN 7337 Standard of the German Institute for Standardisation (Deutsches Institut für Normung, DIN) or respective replacing ISO Standards (ISO 15983 or ISO 15977 for protruding or flat/countersunk head rivets respectively). These standards specify the dimensions, materials, properties and requirements for the use of blind rivets and they are widely used many industries in Europe and worlwide, including automotive, construction and machine building industries.

AVIATIONEU NEW ERA DIN 7337 blind rivets are offered in metric (mm) sizes covering different diameters, lengths and grip ranges. Common diameters include:  2.4 mm, 3.2 mm (1/8″),  4.0 mm, 4.8 mm (3/16″), and 6.4 mm (1/4″).

Material options include steel, stainless steel and aluminum alloys and can be supplied with different finishes, galvanized or coated.

Sold in pieces but mostly in packs with the number of rivets per pack indicated in the product SKU after the letters "PK". Appearing sale prices are per unit of sale used each time.

Intended for use in a wide range of non structural applications in aircrafts, ships, submersibles, RVs, trailers,  machinery, small electronics, and others. 

Please refer to the supplied documentation or contact us.

Blind rivets (also commonly referred to as POP Rivets) are mainly used in applications where there is no access to the rear (blind side) of the joint. They are two-piece fasteners consisting of the rivet body (aka shell, or hat) and the stem or mandrel.They are not material specific and therefore they can be used to join two different material types together.They come in different materials, sizes, military or industrial standards, can be installed with the use of a riveting tool and cover a wide range of structural and non structural applications.

Non structural blind rivets are those designed for applications where the connection doesn't need to withstand significant load-bearing forces. They are offered by different  manufacturers under their respective brands, such as STANLEY® Engineered Fastening AVDEL® & POP®, and others but also as part of our own labelled (AVIATIONEU NEW ERA) product lines, sourced by quality suppliers and intended as cost-effective alternatives to OEM parts. Depending on the rivet, they are made of different materials such as steel, stainless steel,  alluminum alloys, or combinations, they can be supplied in different head styles, and inch or Metric (M) dimensions conforming to national and international standards such as DIN or ISO respectively (*). Sold in pieces but mostly in packs with the number of rivets per pack indicated in the product SKU after the letters "PK". Appearing sale prices are per unit of sale used each time. Depending on the selected rivet & prevailing stock conditions alternate part numbers of the same rivet may be supplied in lieu of the ordered, meeting or exceeding Standard specifications. For additional information on different products please refer to the Product Description section, the supplied documentation or contact us.

(*) Non structural blind rivets produced in accordance with the German DIN 7337 Standard or respective replacing ISO Standards (ISO 15983 for Protruding Head, and ISO 15977 for Flat/Countersunk Head blind rivets) are offered as part of AVIATIONEU NEW ERA product lines and separately listed.

Countersinking is used to ensure that flat head screws or fasteners sit flush against the workpiece. Countersinks used in aerospace and industrial applications are made of durable materials such as High Speed Steel (HSS) known for its hardness, toughness, and ability to withstand high temperatures. High Speed Steel (HSS) countersinks are well suited for cutting aluminum sheet metals. When combined with Cobalt, an alloying agent in steels to improve the hardenability, strength, and wear resistance in machining applications but also due to its ability to resist wear at higher temperatures, the  respective countersinks are often used for cutting stainless steel and other aluminum alloys.

Sourced from quality suppliers, integral (fixed) pilot Microstop countersink cutters are offered as part of our own labeled (AVIATIONEU NEW ERA) product lines. Made from HSS or HSS Steel with Cobalt, they consist ideal tools for aircraft manufacturers, aircraft maintenance/ repair stations or  industrial manufacturers for precise and accurate countersinking, cost-effective alternatives to other OEM products and and stocked by our suppliers for fast deliveries. 

Offered in different flutes, body and pilot diameters and sold  either separately (*) or in custom sets to address specific customer needs in machining applications.

Because of the difference in composition between HSS and Cobalt, main strengths of HSS countersinks are their high hardness and wear resistance. Therefore, as a general rule, they consist a better choice when you want your countersinks to retain their strength even when exposed to extreme wear or abuse. For higher hardenability, strength, and wear resistance and in applications when when countersinks are to be exposed to extremely high temperatures, cobalt countersinks should best be used.

AVIATIONEU NEW ERA countersinks can be used with popular adjustable or Microstop countersinking units utilizing a threaded shank drive (sold separately). For additional information please consult the supplied documentation or contact us.

(*) Minimum Order Quantities apply depending on the selected countersinks or their sets.

U.S. Air Tool Company Inc. (USATCO) is a manufacturer and worldwide distributor of high quality tools for the aerospace/aviation industry. Their offered product range includes installation, assembly, and repair tools and related accessories for air drilling,punch & cutting,  clamp & fastening, cable, wiring & tubing,  lighting & inspection, testing & measuring, riveting, sheet metal forming, sanders & grinders, files,  abrasives & saws, an extensive range of hand, assembly, shop & application tools and more.

For additional information onUSATCO product portfolio please refer to the Product Description section, the supplied documentation or contact us.

ATI® TOOLS 106A series flush swivel type rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Rivet Type: Flush Swivel Type. Shank diameter 0.401".  

ATI® TOOLS 110C series flush straight drive rivets with rubber guard are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Shank diameter 0.401".  Different sizes are available serve specification requirements for face diameters and lengths.