CONNTECT® produces and supplies combustion turbine fuel additives, compressor cleaners & wash systems and related products. CONNTECT® gas turbine compressor cleaners include CONNTECT® 5000, 6000, 7000 and CONNTECT® AF-100 anti-icing fluid for use with all CONNTECT® compressor cleaners. They are suitable for both ON LINE and OFF LINE use while ceaners can be injected directly into the compressor while the turbine is operating ON LINE extending periodic OFF LINE cleaning intervals and reducing average power loss. Available in 5-gallon pails, 55-gallon (208-liter) drums and 330-gallon re-usable and disposable bulk containers (totes).

CONNTECT® 5000 - concentrated water based gas turbine compressor cleaner specifically designed to remove deposits commonly found on gas turbine compressor blades.

CONNTECT® 6000 - concentrated non-toxic high performance low foam water based gas turbine compressor cleaner with cleaning efficiency similar to solvent-based cleaners.

CONNTECT® 7000 - concentrated solvent-based gas turbine compressor cleaner. The combination of non-ionic surfactants, emulsifiers and organic solvents is specifically designed to remove deposits commonly found on gas turbine compressor blades including carbonaceous deposits, oil, grease and soot. It should not be used undiluted.

The ash free ingredients in CONNTECT® cleaners have been carefully selected to ensure that no incremental trace elements can contribute to corrosion of the hot section of the gas turbine, while they contain special inhibitors to ensure compatibility with aluminum, nickel, nickel-cadmium, stainless steel, titanium and common coatings including painted surfaces and elastomers. They can be generally mixed at 1 part cleaner to 4 parts water but the method of injection and total amount of cleaning solution required differs for ON LINE and OFF LINE cleaning.

CONNTECT® AF-100 is a superior quality, specially designed propylene glycol based gas turbine anti-icing fluid for use with all CONNTECT® compressor cleaners. It is non-hazardous, non-toxic and biodegradable. High purity, ash free product insuring no incremental contamination of the hot section of the turbine.  Depending upon the percentage of AF-100 used, the freezing temperature of the cleaning or rinsing solution can be reduced down to -22 deg. F (-30 deg. C). However, its viscosity increases significantly at cold temperatures should not be mixed with cleaner or water when the  product is very cold.

CRC® INDUSTRIES is a global leader in the production of specialty chemicals for maintenance, repair and operational professionals and do-it-yourself applications. CRC® product portfolio includes an extensive range of cleaners, corrosion inhibitors, lubricants & penetrants, adhesives, appearance and specialty products serving the automotive, industrial, electrical, marine, heavy truck, hardware and aviation markets. Selected products are briefly presented at the Product Description section and additional information can be found in the supplied documentation.

FUCHS® Group is the world's largest independent luricant manufacturer developing, producing and selling lubricants and related specialties to cover application needs in different industries, from automotive, mining and exploration, metalworking, agriculture and forestry to aerospace, power generation, construction and transport, steel, metal and cement industries, food, glass and many others.  FUCHS products and related services are structured in six key categories: automotive lubricants, industrial lubricants, lubricating greases, metal processing lubricants, special application lubricants and services.

In the defense sector, FUCHS® offers a comprehensive range of military grade lubricants conforming to NATO specifications. NYE®, part of FUCHS® Group, produces synthetic oils and greases  for special applications. NYE® products are specified for many critical components of Defense applications including:

• Extreme-temperature jet engine actuators

• Cargo aircraft landing gear

• Aircraft controls

• Precision bearings in navigational instruments

• Wide-temperature avionics connectors 

For additional information please refer to the supplied documentation or contact us.

The SWAGELOK® Company is a global supplier of a range of products including fittings, valves, hoses, regulators, medium- and high-pressure products, process instrumentation, quick-connects, measurement devices, tubing and tools, filters, sample cylinders, MPC modular systems, pre-engineered subsystems (PrESS), welding systems, leak detectors, lubricants, and sealants.

SWAGELOK® Goop™ thread lubricants reduce installation time by easing the assembly of leak-tight thread connections for a variety of metals and alloys. Oil-based BLUE Goop® thread lubricants can be used on stainless steel, steel, titanium, aluminum, and nickel based alloys for temperatures up to 400° F (204° C). Halcocarbon based PURE Goop® can be used on titanium, stainless steel, steel, and nickel based alloys for temperatures up to 350° F (176° C) while Oil-based SILVER Goop® thread lubricants can be used on stainless steel, and high temperature alloys for temperatures up to 1500° F (815° C). Offered in different packaging options: 1 oz. (29.5 cm3) tubes (PURE/SILVER Goop®), 2 oz. (59 cm3) tubes (BLUE Goop®) and 1 lb. (450 g) cans (BLUE/PURE/SILVER Goop®). According to the selected product, they resist or prevent galling. 

SWAGELOK® Snoop® liquid leak detectors detect gas leaks in hard-to reach areas. They are non-corrosive and non-flammable. Contain corrosion inhibitor for added protection. SWAGELOK® Snoop® liquid leak detectors can be used over a temperature range of 27° to 200° F (-2° to 93° C). For lower temperatures, –65°F (–54°C) SWAGELOK® Real Cool Snoop® liquid leak detectors can be used. Offered in different containers: 2 fl oz./59 ml (Snoop®), 8 fl oz./236 ml (Snoop®/Real Cool Snoop®) and 1 gal/3.8 l (Snoop®/Real Cool Snoop®).

SWAGELOK® also offers SWAK™, PTFE Tape, and PTFE-Free pipe thread sealants. For more information on SWAGELOK® products please refer to the supplied documentation. 

Manufactured by LIGHTHOUSE FOR THE BLIND INDUSTRIES (LHB), SKILCRAFT® PRO LUBE (also known as SKILCRAFT® PRO LUBE II) is a general-purpose lubricating oil preservative composed of highly refined mineral oil with additives.It is a rust and corrosion inhibitior, formulated to lubricate small arms and automatic weapons, protect them from corrosion, and displace water at low temperatures. This product is approved to Federal Specification MIL-PRF-32033 and meets Quality Parts List (QPL) No. LP-7053A. It is ideal for use within fuel systems and combustion chambers of engines, in addition to other general-purpose lubrication needs. Available Packaging Options: 12.5 oz. Aerosol Cans, Case 12X12.5 oz. Aerosol Cans, Case 16X1 US Quart Cans.

HAZMAT Information: HAZMAT UN Number:1950, Hazard Class 2.2 (Aerosol Can) – Not Regulated (USQ Can)

For additional information please consult the supplied documentation.

SKILCRAFT® PRO LUBE II EU Regulation REACH/SVHC Status

SKILCRAFT® PRO LUBE II, as a MIL-PRF-32033 specification compliant product, generally does not contain substances of very high concern (SVHC) as defined and typically restricted by the EU Regulation REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) regulation. However, as ABILITYONE/SKILCRAFT® products are sourced from a network of manufacturers with slight formula variations, product conformance to REACH/SVHC requirements for import into the European Union has to be confirmed with our supplier at the time of ordering.

ZOK are powerful water-based gas turbine compressor cleaners and corrosion inhibitors produced by SOLIDUS INDUSTRIES. ZOK products are also offered with pH neutral and an effective corrosion inhibitor (ZOK 27) and with a higher pH without the added corrosion inhibitor (ZOK MX) for more challenging cleaning requirements. Originally developed for the UK Ministry of Defence over 40 years ago, ZOK 27 is used all over the world today within the Aviation, Marine, Power Generation, Oil and Gas and Industrial sectors. Regular on-line and off-line washing with ZOK 27 produces outstanding results in gas turbine engine performance: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – ultimately maximising the ROI on gas turbines.

ZOK 27 products are offered in two standards (ZOK 27 and ZOK 27 GOLD. The latter includes neutral, biodegradable, water-based gas turbine compressor and gas path cleaners specially formulated with plant based surfactants to meet ecological sustainability.

SOLIDUS INDUSTRIES ZOK 27 Gold Standard have been designed to meet the requirements of the OSPAR Convention for reduced environmental impact in sensitive marine environments, such as the North Sea. This scheme is administered by Cefas in the UK. They consist the perfect solution for maintaining peak performance of gas turbine compressors operating in ecologically sensitive environments. Regular on-line and off-line washing with ZOK 27 Gold Standard produces outstanding results: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – all this while minimising  environmental footprint.

ZOK 27 and ZOK 27 Gold Standard  are available as CONENTRATED (CNCTR) and READY TO USE (RTU) product versions in different packing options, 12.5 liters (3.3 USG) cans, 25 liters (6.6 USG) cans, 210 liters (55 USG) drums and 1000 liters (264 USG) IBC containers.

ZOK 27 READY TO USE (RTU) versions are intended for users who do not have access to demineralised water. CONENTRATED (CNCTR) vesrions can be diluted 1 to 4 with water before use (20% solution). Demineralised water (<11μS/cm conductivity) should be used for hot/on-line cleaning. Good quality drinking water (<500μS/cm conductivity) may be used for cold/off-line cleaning.

Please also refer to the attached documentation for additional information on these products.

CASTROL® is a producer of oils, lubricants, fluids and greases for a wide range of applications. The company aerospace product range includes  lubricants, fluids and cleaners. Acquired by BP in 1992.

The CASTROL® BRAYCO™ product range includes world-leading choice synthetic oils and greases proven to perform in extreme environments increasing the lifespan of crucial equipment and delivering reliable performance in every critical application. Offered BRAYCO™ range of products features low outgassing and low volatility lubricants designed to virtually eliminate lubricant outgassing, Perfluoropolyether (PFPE) lubricants ideal for vacuum, cleanroom and reactive chemical environments and applications as well as formulations for deep sea applications that actually absorb low levels of seawater and carry it away from sensitive components.

For additional information on CASTROL® BRAYCO™ product portfolio please refer to the brief presentations included in the Product Description section and the supplied documentation.

Manufactured by RADCO INDUSTRIES, RADCOLUBE® is an exceptional 3-in-1 Gun Oil for cleaning, lubricating, and short-term preservation of small and large caliber firearm platforms making their maintenance safe & convenient. With its advanced formulation and adherence to industry standards, this gun oil guarantees superior performance, reliability, and longevity for firearms used in diverse environments. It is the trusted brand of the US Military, Law Enforcement, and Competitive Shooters across the globe. RADCOLUBE® CLP Gun Oil 3IN1 is also the preferred firearm cleaner and lubricant of The Tactical Games™ (TTG) , Multi-Gun Competitors, Extreme Long Range Shooting Organization™ (ELRSO) and King of 2 Mile™ (KO2M) shooting organizations.

RADCOLUBE® CLP keeps small & large caliber weapons in optimum condition and can be used in harsh environments, including cold, salt & dust. It maintains maximum firing performance maintaining any weapon’s maximum firing rate without incident.

Being a Military-Grade CLP gun cleaner and lubricant, RADCOLUBE® CLP  addresses all aspects of the cleaning process, simplifies firearm maintenance, adheres to MIL-PRF-63460F specifications and meets the qualifications of DOD.

RADCOLUBE® CLP has a maximum recommended shelf life of 6 years from date of manufacture.

For additional information please consult the supplied documentation.

Petroleum distillates include a range of products such as mineral oils, naphtha solvents, heavy fuel oils, waxes, benzenes and others used in many industrial and other applications. They are offered as part of our own labelled (AVIATIONEU NEW ERA) product portfolio or as OEM products (separately listed).

Naphtha Solvents are chemical product comprised of volatile and extremely flammable liquid hydrocarbons  derived from the refining of crude oil but can also be produced from natural gas condensates or petroleum distillates. Naphtha solvents are very strong and versatile, often used in hydrocarbon cracking, laundry soaps, and cleaning fluids among other applications. Those conforming to Mil-Spec TT-N-95 or its latest Rev. B (TT-N-95B) are aliphatic naphtha acrylic cleaning solvents available in Type I or Type II for use in organic coatings and as a cleaner for acrylic plastics. Usual packings include 1 USG cans, 5 USG pails or 55 USG drums.

AEROSHELL® brand relates to one of the most comprehensive and proven ranges of aviation lubricants in the aviation lubricants market worldwide. AEROSHELL® lubricants include aircraft piston and turbine engine oils, airframe and wheel-bearing greases, hydraulic fluids,  preservatives and other fluids. AEROSHELL® aviation lubricants are available in in different packaging options such as 55 gallon drums, 5 gallon pails, 1 US quart cans and cartons with 24 1 US cans each. A brief description of AEROSHELL® aviation lubricants is included in the Product Description section. Some of AEROSHELL® lubricants are already offered through our Web Platform for Supplies. Others, not currently listed, can also be furnished through our network of co-operating suppliers. For more information please refer to the supplied brief product catalogs and product descriptions,  the individual product presentations and corresponding documentation or contact us.

PHILLIPS 66® Company is among the largest refiners in the U.S, a major contract jet and avgas fuel supplier to private, commercial, and military aviation and a producer of industrial oils. The Phillips 66® line of aviation lubricants approved by the FAA and leading engine manufacturers includes premium single and multiviscosity piston engine oils and  highest quality hydraulic fluids compatible with other brands. They can be used in diverse climatic conditions. PHILLIPS 66® protective additive packages exceed industry specifications.

Some of PHILLIPS 66® aviation lubricants listed below are offered through our Web Platform for Supplies. Others, not currently listed, can also be furnished through our network of co-operating suppliers. For more information please refer to the Product Description section, the supplied documentation or contact us.

PHILLIPS 66® Aviation & Industrial Oils

PHILLIPS 66® X/C® Aviation Oil, Ashless Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines

PHILLIPS 66® VICTORY® Aviation Oils

VICTORY® Aviation Oil 100AW, Ashless Dispersant, Single-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)

VICTORY® Aviation Oil AW 20W-50, Ashless Dispersant, Multi-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)

VICTORY® DIESEL Aviation Oil 10W-40, Fully Synthetic Aviation Engine Oil for Aircraft Compression Ignition Engines

PHILLIPS 66® TYPE A Aviation Oil, Ashless Dispersant, Single-Grade Engine Oil for Aircraft Piston Engines. Available in two grades, 100AD (SAE 50) and 120AD (SAE 60)

PHILLIPS 66® TYPE M Aviation Oil, Non-Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines

PHILLIPS 66® Reference Oil 50

PHILLIPS 66® Food Grade White Mineral Oil for use in food processing plants, consumer products, and in other applications.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates.

CHEMETALL® ARDROX® 185 Series colorless scale/rust removers have a greater than 12.5 pH level and a relative density of 1.43. The series includes 185L, a highly alkaline concentrated solution in water containing sequestrants and 185 water soluble powder offering a strong alkaline solution containing sequestrants. They can be used to remove rust and scale from iron and steel  in immersion tanks but also oil, grease and some air-dried paints.  They will not attack or cause hydrogen embrittlement in ferrous alloys and there is markedly less tendency for re-rusting to occur than with acid pickling.

ARDROX® 185L is usually used at a concentration of 30-50% by volume in water, depending on the amount of rust or scale to be removed. This corresponds to a concentration of 200 - 375 g/L of ARDROX® 185 in water. ARDROX® 185 must always be dissolved in cold water. There will be an exothermic reaction and the solution will heat up to 50-60°C / 120-140°F. The ARDROX® 185L is applied by immersion between 82 and 93°C (180 and 200°F). Agitate with mechanical agitation, do not use air agitation.

The immersion time will vary according to the degree of contamination, light rust being removed in approximately 10 minutes while heavy rust may take about an hour. If the components are heavily contaminated with oil or grease, the life of the ARDROX® 185L  bath will be prolonged if they are first degreased (e.g. with an ARDROX 6-series product).

When used in conjunction with the adequate other ARDROX® specialties (sold separately), ARDROX® 185L can be used to remove scale from hot-end jet engine components. It can also be used for cleaning parts made of titanium.

Thorough water rinsing must take place after the use of ARDROX® 185L. If no further immediate surface treatment is to follow, the use of a dewatering and protective fluid such as an ARDROX® 3-series is desirable to give protection from re-rusting.

The ARDROX® 185L  comes in a 5-gallon and 180-liter containers while the 185 powder in 25 kg bags.

Qualifications / Approvals:

SAE - ARP 1755B ( conformance )

CFMI - CFM56

Rolls Royce - CSS244 OMat

SNECMA - DMR 70-620

GE SPMC 70-80-04

Pratt Whitney - SPMC 70-12-00

Turbomeca

For additional information please refer to the attached documentation.

Tectyl™ is a global brand of rust preventative coatings offering a wide range of products including coatings, compounds, and underbody protection products in various formulations like hot melt wax, water-based, and solvent-based options. Originally a  Valvoline Global Operations brand, Tectyl™  has evolved to an independent solution provider modernizing their portfolio with changes in visual identity, product names, and packaging updates. Tectyl is a brand of CorPro GmbH in the EMEA region since January 2023.

Tectyl™ products are known for their strong adhesion to metal surfaces, they provide an active barrier against rust and corrosion, can be used for both short-term and long-term protection, and for indoor and outdoor applications. 

Tectyl™ products are a globally recognized and  trusted in various industries like  automotive, transportation, and marine for their ability to protect metal surfaces from corrosion and other damaging elements. 

For additional information on Tectyl™ product portfolio please consult the Product Description section and the supplied documentation.

SHELL® extensive range of industrial lubricants, including their GTL (gas-to-liquids) technology oils, highlight the difference between industry standards and industry-leading performance. 

SHELL® range of industrial lubricants include lubricating oils for a variety of applications, hydraulic oils, coolants and greases.

SHELL® lubricating oils can be used on turbines (TURBO turbine oils separately presented), rotary and reciprocating compressors (CORENA), stationary gas engines (MYSELLA), power-generation (ARGINA & GADINIA), transformers (DIALA), axle, gear and transmission systems (SPIRAX ), slideways (TONNA), as bearing & circulating oils (MORLINA), process oils (RISELLA X) as well as for worm drive gears (OMALA). TELLUS hydraulic oils, Coolants and GADUS greases are also offered as part of SHELL® range of industrial lubricants. They are briefly presented in the Product Description section while further information can be obtained through the supplied documentation.

ASG CORPORATION ASG KUBER brand relates to an extensive product portfolio offering solutions for applications in the Defence, Aerospace, Marine Ground, Automotive, Rail and Industrial sectors, including parts, tools, lubricants, lighting, batteries and others.

ASG KUBER MIL-R-25134 B Paint Remover & Lacquer Solvent is a thickened, non phenolic aircraft paint stripper which meets the requirements of BOEING Document D6-17487 and MIL-PRF-25134 C. MIL-R-25134 B is a viscous liquid developed to remove multiple coats of paint. It clings to vertical as well as the underside of horizontal surfaces. MIL-R-25134 B can be applied as received by brushing or spraying. It is specially designed to remove lacquer and enamel coating finishes from metal surfaces of aircraft or other surfaces while it can also be used for stripping various types of paints such as varnish, zinc chromate primer, epoxy, polyurethane, etc.

Allow MIL-R-25134 B sufficient dwell time for thorough loosening or blistering of the paint. When paint is loose, thoroughly agitate all areas with a stiff bristle brush. The complete removal of the paint residues is accomplished with high pressure, high volume, cold water or with a steam cleaning machine. Normally one coat of MIL-R-25134 B is sufficient to remove more than one paint coating. Where multicoat systems have to be removed, it may be necessary to use more than one application of MIL-R-25134 B.

Product Features & Benefits

Safe to all metals.

Very effective, normally removes more than one coating of paint.

Non-flammable.

Free of phenolics.

Easily rinsed with cold water.

Can be applied by brush or non-atomizing spray methods.

Used as received (Ready-To-Use). No mixing or dilution required.

Used at room temperature.

An integral part of INNOSPEC Inc., INNOSPEC FUEL SPECIALTIES business unit is a leading developer and supplier of specialty additives for petroleum-based fuels, coal, and biofuels used in a diverse scope of applications.

Corrosion Inhibitor additives form part of INNOSPEC FUEL SPECIALTIES product lines. They are designed to protect against internal corrosion of fuel storage and distribution systems  and they are used extensively in storage, pipeline and aviation applications.They protect against storage vessel and pipeline leakage, contamination of fuel with particulates and blockage of filters and screens from corrosion material. 

INNOSPEC’s approved aviation fuel Corrosion Inhibitors/Lubricity Improvers (CI / LI) serve a dual function, they improve the fuel’s lubricity as well as protecting the fuel system against corrosion.Two products in the INNOSPEC’s DCI product range (DCI-4A and DCI-6A) hold numerous approvals for aviation fuel usesare approved for use in jet fuels. DCI-4A is a preferred inhibitor for aviation fuels while DCI-6A, a ‘stronger’ corrosion inhibitor than DCI-4A is preferred for all ground fuels and for pipeline corrosion protection, due to its low treat rate.

INNOSPEC's STADIS® aviation fuel Static Dissipators  aim to enhance safety by preventing static charge build up when refining or handling fuels. 

STADIS® 450 is a non-metallic distillate fuel additive that increases the electrical conductivity of distillate fuels and helps reduce hazards associated with their mixing, transfer, and shipment.It can be used in JP-8, JP-5, Jet-A1 and Jet B fuels. STADIS® 450 is the premium static dissipator additive (SDA) in use today and  the only SDA approved worldwide for use in civilian and military aviation turbine jet fuels. STADIS® 425 is intended for use in  ground fuel applications and specifically designed for use in applications such as diesel fuels and gas oil.

For more information please refer to the Product Description section and the supplied documentation. 

LUKOIL® LUBRICANTS brand relates to an extensive range of lubricants serving the needs of applications in different markets worlwide, from passenger cars, commercial vehicles and small engines to aviation, marine and industrial uses. LUKOIL® LUBRICANTS portfolio includes among others motor oils, transmission, gear, compressor, turbine, gas engine, machine sideway, rolling mill, circulating, quenching oils, hydraulic and coolant fluids and greases. They are available in in different packaging options. 

A brief description of LUKOIL® lubricants  which can be furnished through our network of co-operating suppliers is included in the Product Description section. For additional information please refer to the supplied documentation or contact us.

Note: Supplied information is provided for reference only. For the selection of the suitable lubricant please observe the manufacturer's instructions.

HENKEL LOCTITE® is the world’s leading brand and trusted choice for high-performance adhesives, sealants and surface treatments for manufacturing applications worldwide, from aircraft to furniture. LOCTITE® product portfolios includes an extensive range of adhesives, sealants, surface treatments, and other industrial chemicals exploiting different technologies including acrylic, anaerobic, cyanoacrylate, epoxy, hot melt, silicone, urethane, and UV/light curing technologies.These technologies combined with innovations result in product solutions for adhesives, sealants and functional coatings that are essential to countless industrial applications. 

HENKEL industrial sealant applications extend from automotive, electronics, aerospace, metal, and durable goods, to consumer goods, maintenance and repair, and packaging industries. In addition to LOCTITE® product lines, HENKEL also offers an extensive poduct portfolio under TEROSON®  brand providing bonding, sealing, coating, acoustic, stiffening and reinforcing solutions for OEM transportation assembly, vehicle repair and maintenance (VRM) , industrial assemblies and building industry applications. The TEROSON® brand represents a global and scalable technology, offering extensive market and application competence for innovative, reliable and complete systems solutions tailored to customer needs, using a wide range of technologies in the form of foams, foils, tapes, patches, extrusions, baffles, membranes, and pumbable/sprayable gels and liquids.

In Aerospace, HENKEL LOCTITE® product portfolios (listed separately)  include HYSOL® structural adhesives and film systems for aircraft and composite repair, aerospace potting solutions and Freketo mold release agents for the aerospace composites industry. LOCTITE® HYSOL® Aerospace adhesives are used by all major aerospace manufacturers including Boeing Commercial Aeroplanes Group and provide superior integrity to aircraft structures without added weight and ensure durable, tough bonding in composite and metal surfaces. Structural adhesive applications include joint sealing, magnet bonding, metal bonding, multiple surface bonding, noise, vibration, and harshness (NVH), plastic and composite bonding, potting and encapsulating and others.

Several HENKEL LOCTITE® and TEROSON® products are included in this listing and briefly described in the Product Description section. For LOCTITE® HYSOL® Aerospace products please refer to the respective product presenatation.

For additional information please consult the supplied documentation or contact us for non listed items.

EASTMAN SKYDROL™ Aviation Hydraulic Fluids were developed to meet the requirements established by manufacturers and backed by recognized experts in phosphate ester technology. SKYDROL™ was the first fire-resistant hydraulic fluid in the industry and today remains the most advanced aviation hydraulic fluid. SKYDROL™ aviation hydraulic fluids include:

SKYDROL™ PE-5,  a Type V, fire-resistant hydraulic fluid offering the longest fluid life of any phosphate ester fluid available today, even under high moisture conditions. Key benefits include less frequent fluid replacement, reduced disposal volume and lower environmental footprint. Meets BMS3-11P Type V, Grade A & C specification.

SKYDROL™ 5, a lighter-weight hydraulic fluid due to its lower density resulting in fuel savings.  SKYDROL™ 5 is the first aviation hydraulic fluid demonstrating erosion-resistance at higher temperatures leading to decreased maintenance and downtime. Meets BMS3-11P Type V, Grade B & C specification.

SKYDROL™ LD-4, the world’s best-selling Type IV aviation hydraulic fluid, featuring low density, valve erosion prevention, and deposit control. Erosion resistance is made possible by a breakthrough anti-erosion additive and acid scavenger included in the formulation. Meets BMS3-11P Type V, Grade B & C specification.

SKYDROL™ 500B-4, the only commercially available standard-density aviation hydraulic fluid offering additionally improved erosion resistance, as it contains the same anti-erosion additive and acid scavenger as LD-4. Meets BMS3-11P Type IV, Class 2 specification.

For additional information please refer to the supplied documentation or contact us.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA AVIATION HYDRAULIC FLUIDS & PRESERVATIVES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA engine oils and greases please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.