PHILLIPS 66® Company is among the largest refiners in the U.S, a major contract jet and avgas fuel supplier to private, commercial, and military aviation and a producer of industrial oils. The Phillips 66® line of aviation lubricants approved by the FAA and leading engine manufacturers includes premium single and multiviscosity piston engine oils and  highest quality hydraulic fluids compatible with other brands. They can be used in diverse climatic conditions. PHILLIPS 66® protective additive packages exceed industry specifications.

Some of PHILLIPS 66® aviation lubricants listed below are offered through our Web Platform for Supplies. Others, not currently listed, can also be furnished through our network of co-operating suppliers. For more information please refer to the Product Description section, the supplied documentation or contact us.

PHILLIPS 66® Aviation & Industrial Oils

PHILLIPS 66® X/C® Aviation Oil, Ashless Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines

PHILLIPS 66® VICTORY® Aviation Oils

VICTORY® Aviation Oil 100AW, Ashless Dispersant, Single-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)

VICTORY® Aviation Oil AW 20W-50, Ashless Dispersant, Multi-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)

VICTORY® DIESEL Aviation Oil 10W-40, Fully Synthetic Aviation Engine Oil for Aircraft Compression Ignition Engines

PHILLIPS 66® TYPE A Aviation Oil, Ashless Dispersant, Single-Grade Engine Oil for Aircraft Piston Engines. Available in two grades, 100AD (SAE 50) and 120AD (SAE 60)

PHILLIPS 66® TYPE M Aviation Oil, Non-Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines

PHILLIPS 66® Reference Oil 50

PHILLIPS 66® Food Grade White Mineral Oil for use in food processing plants, consumer products, and in other applications.

Petroleum distillates include a range of products such as mineral oils, naphtha solvents, heavy fuel oils, waxes, benzenes and others used in many industrial and other applications. They are offered as part of our own labelled (AVIATIONEU NEW ERA) product portfolio or as OEM products (separately listed).

Naphtha Solvents are chemical product comprised of volatile and extremely flammable liquid hydrocarbons  derived from the refining of crude oil but can also be produced from natural gas condensates or petroleum distillates. Naphtha solvents are very strong and versatile, often used in hydrocarbon cracking, laundry soaps, and cleaning fluids among other applications. Those conforming to Mil-Spec TT-N-95 or its latest Rev. B (TT-N-95B) are aliphatic naphtha acrylic cleaning solvents available in Type I or Type II for use in organic coatings and as a cleaner for acrylic plastics. Usual packings include 1 USG cans, 5 USG pails or 55 USG drums.

CRC® INDUSTRIES is a global leader in the production of specialty chemicals for maintenance, repair and operational professionals and do-it-yourself applications. CRC® product portfolio includes an extensive range of cleaners, corrosion inhibitors, lubricants & penetrants, adhesives, appearance and specialty products serving the automotive, industrial, electrical, marine, heavy truck, hardware and aviation markets. Selected products are briefly presented at the Product Description section and additional information can be found in the supplied documentation.

LUKOIL® LUBRICANTS brand relates to an extensive range of lubricants serving the needs of applications in different markets worlwide, from passenger cars, commercial vehicles and small engines to aviation, marine and industrial uses. LUKOIL® LUBRICANTS portfolio includes among others motor oils, transmission, gear, compressor, turbine, gas engine, machine sideway, rolling mill, circulating, quenching oils, hydraulic and coolant fluids and greases. They are available in in different packaging options. 

A brief description of LUKOIL® lubricants  which can be furnished through our network of co-operating suppliers is included in the Product Description section. For additional information please refer to the supplied documentation or contact us.

Note: Supplied information is provided for reference only. For the selection of the suitable lubricant please observe the manufacturer's instructions.

LIQUI MOLY is Germany's most popular brand of motor oil. It is also one of the few full range brands in the world with more than 4,000 premium quality motor and gearbox oils, fuel and oil additives, care products, chemical problem-solvers and service products.

LIQUI MOLY MOLYGEN New Generation range of fully synthetic motor oils indicate their Molecular Friction Control (MFC) technology with their deep green visual signature. Tungsten, a key component in MOLYGEN oils, is a rare metal with an extremely high melting point used in many high-temperature applications. As an additive in LIQUI MOLY MOLYGEN oils, Tungsten leads to a significant friction reducation and a corresponding reduction of engine's wear and extension of engine life.  Less friction can also lead to reduced engine fuel consumption as less energy is required to overcome the internal losses. MFC technology in MOLYGEN New Generation oils leads to smoother engine running with optimum oil pressure, a long service life, and reduced fuel consumption and emissions. 

LIQUI MOLY MOLYGEN  New Generation motor oils are offered in some of the most common viscosities, including 0W-20, and 5W-20 through 5W-50. They are designed to meet or exceed standards including the latest from General Motors and those of BMW, Mercedes-Benz, Honda, Subaru, and more. A brief presentation of different oils in the MOLYGEN New Generation range is provided in the Product Description section. Please also refer to the supplied LIQUI MOLY Oil Guide on different applications.

Note: Supplied information is provided for reference only. For the selection of the suitable motor oil please observe the manufacturer's instructions.

ANDEROL® ROYCO® brands  of LANXESS Corporation are global leaders in lubricants with a diverse portfolio of engine, turbine, marine oils, gear, pump and bearing oils, greases, hydraulic, compressor, aviation, finished, metal working and general industrial fluids, specialty and Mil-SPEC lubricants and base stock. Please refer to the supplied table of ROYCO® product specifications.

ROYCO® greases and anti-seize compounds, listed below, are offered in 14oz, 1lb, 1.75lb, 6.5lb, and 35lb. containers. Please refer to the Product Details Section for a brief presentation of offered products.

ROYCO® 27 Advanced Synthetic Multi-Purpose Aircraft Grease

ROYCO® 43 General-Purpose Low Temperature Lubricating Pneumatic Systems Grease

ROYCO® 44 Heavy-Duty Anti-Seize Compound

ROYCO® 49 General-Purpose Extreme Pressure Grease

ROYCO® 64 Molybdenum Disulfide, Lithium Grease for High & Low Temperatures

ROYCO® 1MS Molybdenum Anti-Seize Compound 

ROYCO® 11MS High Load General Purpose Grease

ROYCO® 22MS Synthetic Oil Based Grease

ROYCO® 81MS Silicon Base Synthetic High Temperature Grease

ANDEROL® ROYCO® and NYCO oils, greases, fluids and specialty products are used in aircraft of Russian manufacturers meeting the corresponding specifications. Most of their products are included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

EXXONMOBIL® Mobil Turbo 319A-2 is a fully synthetic lubricant developed to meet the performance requirements of Russian gas turbine aircraft engines which operate on mineral-oil-based lubricants. Formulated from a synthetic hydrocarbon combination of polyalphaolefin (PAO) and hindered ester based stock, Mobil Turbo 319A-2 is fortified with a unique chemical additive system. The resulting product has far superior thermal and oxidation stability than mineral-oil-based lubricants. The ability of Mobil Turbo 319A-2 to resist deterioration and deposit formation allows the potential for extended oil drain intervals and less frequent maintenance.

The closely controlled viscosity of Mobil Turbo 319A-2 at -51º C, along with a -60ºC pour point, ensure good low-temperature fluidity, permitting engine starting and lubrication at low temperatures. Mobil Turbo 319A-2 exhibits excellent bulk oil stability at temperatures up to 200º C (392º F). The evaporation rate of Mobil Turbo 319A-2 at high temperatures is significantly lower than mineral-oil-based products, and helps minimize oil consumption. The lubricant has excellent resistance to foaming.

Product Features and Benefits :

- Low evaporation loss and oil consumption

- Reduced sludge and carbon deposits

- Improved bulk oil oxidation stability and extended oil drain intervals

- Compatible with existing seal materials

- Reduced engine maintenance, including potential for extended drain intervals

Applications :

Mobil Turbo 319A-2 is recommended for aircraft gas turbine engines that normally operate on mineral-oil-based lubricants, as well as engines approved to operate on oils meeting the specifications listed below.

Mobil Turbo 319A-2 is approved against the following specification of the Russian Central Institute of Aeronautical Motors (CIAM):

- IMP-10

- MS, 8P, MS-8RK 36/1 Ku-A

- VNII NP 50-1-4f and -4u

- B3V and LZ-240

- Mobil Turbo 319A-2 also meets U.S. Military Specification MIL-L-6081C, as well as the essential performance requirements of U.S. MIL-L-7808K, Grade 3.

For additional information please consult the supplied documentation or contact us.

EXXONMOBIL® AVIATION Mobil Jet Oil 254 is a third-generation oil formulated to deliver exceptional high-temperature thermal stability  (HTS), excellent resistance to coking and deposit control as well as exceptional oxidation and corrosion protection. It meets the demanding requirements of latest technology  aircraft-type gas turbines operating over a wide range of severe operating conditions.  When compared to a typical Type II lubricant, Mobil Jet Oil 254 reduces bulk oil oxidation by up to 50 percent and shows deposit control capability 50 F higher.  These properties have been confirmed in various laboratory tests including; the Corrosion-Oxidation Stability Test,  Alcor Deposition Test, Vapor Phase Coker, Erdco High-Temperature Bearing Test, Ryder Gear and the Mobil Thin Film Oxidation Test.The closely controlled low-temperature viscosity of Mobil Jet Oil 254, along with its low pour point (below -54 ºC), ensure good low-temperature fluidity to permit starting and lubrication at temperatures as low as -40 ºC.  In extensive laboratory testing and in-flight experience, Mobil Jet Oil 254 also exhibits excellent bulk oil stability at temperatures up to 232 ºC (450 ºF) for extended periods.  The evaporation rate at these temperatures is low enough to prevent excessive loss of volume.  The load-carrying ability of Mobil Jet Oil 254 comes from its synthetic base stock viscosity and, therefore, is not subject to loss from viscosity index additive shear.  

Product Features & Benefits:

Excellent thermal and oxidation stability reducing the formation of carbon (carbon coking) and sludge deposits. Helps operators reduce shop visits and maintenance costs. Maintains engine efficiency and extends engine life. Reduces bulk oil oxidation by 50% and increases deposit control by 50 ºF

Excellent wear and corrosion protection extending seal, gear and bearing life. Reduces engine maintenance. 

Viscosity and shear stability across wide temperature range providing effective lubrication at high operating temperatures

Chemically stable at high operating temperatures reducing evaporation losses and lowering oil consumption

Excellent resistance to foaming maintaining film strength under rigorous operating conditions

Good low temperature fluidity permiting start-up and ensuring effective lubrication of critical components at temperatures as low as -40 °F.

The SHELL® Gadus range of industrial greases (formerly SHELL® Alvania) include Gadus “S” high performance, multi purpose greases  and the latest extreme temperature “T” polyurea synthetic speciality greases designed for the most severe extreme-temperature and long-life applications.They have been designed to deliver the best value through long grease life, system efficiency, and enhanced wear protection enabling equipment operators to bebefit from Gadus greases' thickener type, oil viscosity, operating conditions and application and their NLGI grade (consistency) selecting the grease that will deliver optimum value to their operations. From greases that offer reliable performance for standard applications to specialist low noise, high-temperature and heavy-load greases,  there is a Shell Gadus product that can help to optimise your system’s efficiency and costs of operation.

For more information on SHELL® Gadus greases please refer to the Product Description section and the supplied documentation.

AMSOIL® is an independently owned oil company developing and producing high-quality and high-performance synthetic engine oils, synthetic greases, compressor oils, hydraulic fluids, gear lubes as well as antifreeze and brake fluids for automotive, industrial, agricultural and other industries.

AMSOIL® engine lubricants for powersports include an extensive range of products for 2 and 4-stroke engines and equipment. The 2-stroke synthetic engine oils are briefly presented below. They are offered in different packagings. For other AMSOIL® products see their separate presentations. 

INTERCEPTOR® Synthetic 2-Stroke Oil is designed for all two-stroke snowmobiles. It prevents piston ring & exhaust power valve sticking. This oil features an exceptional cold-temperature fluidity (-63°F [-53ºC] pour point), outstanding performance in DFI engines, low smoke and odor, protects against wear and helps prevention of plug fouling. AMSOIL® severe engine tests of INTERCEPTOR® against BRP® XPS™ Ski-Doo 2T E-TEC® synthetic oil have shown INTERCEPTOR® equal or higher performance to Ski-Doo OEM brand.

DOMINATOR® Synthetic 2-Stroke Racing Oil provides excellent film strength for high-heat, high-rpm engines. It also features an anti-friction formula for maximum power, clean burning helping prevention of ring sticking and plug fouling and protection of coated and non-coated racing pistons

INJECTOR Synthetic 2-Stroke Oil offering excellent film strength for high-heat, high-rpm engines, an anti-friction formula for maximum power, clean burning helping prevention of ring sticking and plug fouling and protection of coated and non-coated racing pistons

HP MARINE Synthetic 2-Stroke Oil suitable for Evinrude* E-TEC* factory-lean setting. It exhibits a superior performance as an injection oil or at 50:1 pre-mix. Low smoke and aquatic toxicity, helps prevent deposits, protects against wear and rust

100:1 Pre-Mix Synthetic 2-Stroke Oil, performance-engineered for outboards. Designed for pre-mix applications as lean as 100:1 ratios or richer. Improves throttle response and lowers or eliminates smoke. Minimizes deposit formation and lowers emissions. Performance emphasis on the cooler operations of water-cooled motors.

For additional information please refer to the supplied documentation or contact us.

HENKEL LOCTITE® is the world’s leading brand for adhesives, sealants and surface treatments. LOCTITE® product portfolios include an extensive range of adhesives, sealants, surface treatments, and other industrial chemicals that include acrylic, anaerobic, cyanoacrylate, epoxy, hot melt, silicone, urethane, and UV/light curing technologies. Available in various packaging sizes.

Several HENKEL LOCTITE® products are listed in the Product Description section. For additional information please consult the supplied documentation. For non listed items please contact us.

The AEROSHELL® range of mineral and synthetic aviation greases are multi-functional to reduce costs and improve maintenance efficiency.

AEROSHELL® greases No. 5 and 6 are microgel thickened with mineral oil base. No 5, combines high load-carrying ability with excellent resistance to water and high temperatures. Used primarily in aircraft wheel bearings and engine accessories operating at high speeds/relatively high temperatures. No 6 is a general purpose airframe grease with outstanding low temperature torque properties and resistance to water. Used primarily in plain and anti-friction bearings on general aviation aircraft. No 14 is a leading helicopter multi-purpose, calcium soap thickened, mineral  grease inhibiting corrosion and oxidation due to its anti-rust additives.

No 7, an advanced multipurpose airframe grease and No 22, a versatile multipurpose grease, are both microgel thickened with synthetic diester/synthetic hydrocarbon oil base respectively. Both are corrosion inhibited and fortified against oxidation. No 7 is recommended for highly loaded gears and actuator screw mechanisms, instrument and general airframe lubrication while No 22 for aircraft wheel bearings, engine accessories and airframe lubrication and for anti-friction bearings operating at high speeds at high or low temperatures.

No 33 is a universal airframe grease with a synthetic hydrocarbon/ester oil base and enhanced corrosion resistance and load-carrying capacity to reduce wear and extend re-greasing intervals. Developed to satisfy almost all airframe lubrication requirements with a single grease. Like No. 58, an advanced wheel bearing grease, they are lithium thickened greases. No 64, an extreme pressure (EP) MIL-G-21164D compliant airframe grease containing molybdenum disulfide, extends  component life through its exceptional load-carrying and EP properties. Fully compatible with No 33, both can protect over 98% of the grease application points on a typical airliner.

AEROSHELL® Grease products now carry a 6 year shelf life from manufacture. These products include AEROSHELL® Grease 5, 6, 7, 14, 22, 33, 58 & 64.

NOTE: Other AEROSHELL® products such as piston engine and turbine oils and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to the supplied list of offered products or contact us for additional information or assistance on non listed products.

White Oils (also known as pharmaceutical/food-grade liquid paraffins) are highly raffinated mineral oils manufactured almost exclusively from a particularly refining process of traditional paraffinic base stocks. This process provides them with particular characteristics of purity, absence of color, smell and taste fulfiling the stringent purity requirements set by different pharmacopoeias such as European Pharmacopoeia (Ph. Eur.), United States Pharmacopoeia (USP) & others.. They are produced in different viscosity grades (e.g. ISO VG 15, 32, 46, 68) by many manufacturers worldwide (including largest global suppliers such as HF Sinclair, Savita, ExxonMobil, Calumet or Sinopec and many other smaller producers). Their range of applications extends from pharmaceuticals and cosmetics to food processing and industrial uses requiring a light, non-toxic lubricant providing lubrication, moisture resistance, and oxidation stability while meeting high purity standards. Offered in various packaging options including 20/25 liter cans/pails or drums of 208/209 liters when higher quantities are required. Offered either as OEM brands of their respective producers or as part of our own labelled (AVIATIONEU NEW ERA) product lines. For more information please refer to the supplied TDS/SDS documentation on individual listed products available in the Attachments section or contact us.

TOTALENERGIES (formerly TOTAL) AeroGear 823 is an extreme pressure mineral oil for helicopter gears.

It features excellent resistance to high loads and shocks, anti-corrosion and anti-rust as well as antifoaming capabilities.

It is intended for lubrication use of highly stressed helicopter gears.

TOTALENERGIES AeroGear 823 is certified by DCSEA 255/A and EUROCOPTER and conforms with the following specifications:

- US: meets MIL-PRF-6086E (Medium grade)*

- UK: DEF-STAN 91-112/1*

- Joint Service Designation: OEP-70

- NATO code: O-155.

Offered in 5-liter containers and drums.

For additional information please contact us.

EASTMAN  CHEMICAL COMPANY is the only oil manufacturer to offer broadly used DOD-PRF-85734 and MIL-PRF-23699 High Thermal Stability (HTS) HTS Class oils, to suit all helicopter oil lubrication needs. 

EASTMAN TURBO (brand change for formerly BP TURBO) Oils are trusted solutions for aircraft turbine engine lubrication with different products addressing respective needs for better engine health, reliable performance across a wide temperature range, advanced APU performance or high-load-carrying demands.  Available in different packaging options such as 1 US Quart cans, 5 gallon pails or 55 gallon drums.

TURBO OIL 2197™ (formerly BP TURBO OIL 2197)  is a AS5780 HPC / MIL-PRF-23699 HTS class, 5 cSt High Thermal Stability (HTS) synthetic lubricant for the most thermally demanding aerospace and aviation turbine engine and accessory applications. It the most widely used HTS oil in the world, featuring  high temperature cleanliness, excellent oxidative stability for the turbine engine's health and best-in-class coking for longer bearing life and outstanding thermal stability, 

TURBO OIL 2380™ is an 5 cSt synthetic aviation turbine oil (ATO) with a balanced combination of oxidative and thermal stability and best low temperature characteristics. It was one of the first turbine oils to be qualified and approved for Mil-PRF-23699 STD (Standard) class and subsequently SAE AS5780 SPC (Standard Performance Capability) class  and still one of the most widely used turbine oils in the commercial aviation industry. It offers optimal electrical conductivity to avoid short circuits and is the best oil for low-temperature viscosity. The engine can be started at low temperatures without wear issues. Hard starts can also be reduced and carbon seal life can be improved. It is uniquely suited for turboprops, providing the highest high-load-carrying capability in its class.

TURBO OIL 2389™ is a 3 cSt synthetic gas turbine oil, offering best-in-class thermal stability for more reliable performance across a range of temperatures. It is an advanced and most widely used APU performance oil with excellent “cold soak” reliability and good oxidation stability. Approved to MIL-PRF-7808 Grade 3 specification..

TURBO OIL 25™  is a high load-carrying gas turbine oil, for the most demanding gear applications. It is formulated for the high-load-carrying demands of today’s helicopter transmission systems reducing wear on critical parts and improving reliability and operation safety in transmissions and gearboxes.

TURBO OIL 274™ (formerly BP TURBO OIL 274) is a DEF STAN 91-98 oil in the 7.5 cSt viscosity class, uniquely suited for older turboprop applications. It features a good high temperature performance and load-carrying ability for long trouble-free operations under severe conditions.

For additional information please consult the Product Description section, refer to the supplied documentation or contact us.

TIODIZE Co., Inc. is an advanced technology company specializing in the development, manufacturing and application of composite products and advanced coatings. Their composite product range includes FIBER/LITE® fasteners and fastening devices maintaining high tensile, shear and fatigue strength at temperatures to 700°F and TRIBO/COMP® self-lubricating bearing materials with an unequaled wear life and a high strength to weight ratio.TIODIZE coating product portfolio includes corrosion & emissivity coatings, dry-film lubricants and anti-seize products as well as a range of Green, environmentally compliant non-hazardous cleaners and lubricants meeting EU REACH Regulation requirements for the sports, consumer and racing markets, such as their  ALUMAZITE® family of aluminum pigmented corrosion inhibiting coatings. 

TIODIZE® TIOLON® and TIOLUBE® families of products are advanced anti-friction, anti-wear, MIL-spec quality dry film lubricants for static and dynamic conditions. Their product lines include TIOLON® PTFE (Teflon®) and TIOLUBE®  MoS2 (Molidisulfide) organic and inorganic, low VOC and water based dry films suitable for different operating temperature applications.Their dry-film lubricants are utilized in almost any application that involves lubrication for friction and wear or  barriers for galling and corrosion in an increasingly broad spectrum of industries including aerospace, automotive, marine and electronics.

For more information on TIODIZE products please refer to the Product Description section and the supplied documentation.

ENGINEERED CUSTOM LUBRICANTS (ECL), part of Quaker Houghton, is a producer of lubricants for automotive, aviation & aerospace, semiconductor and specialty valves' applications. ECL CHRISTO-LUBE® products include Perfluoropolyether (PFPE) oils, greases, and dispersions chosen for their extreme temperature capabilities (-90° C to 250° C), excellent compatibility with virtually all materials (inc. plastics & elastomers), or their non-reactivity with oxygen, other gasses, chemicals, solvents, or automotive fluids. The following ECL lubricants can be used in Aerospace  applications:

Aircraft and Instrument Greases meeting MIL-PRF-27617G spec. Fully fluorinated, PTFE  thickened, capable for extreme temperature operations with an outstanding stability with oxygen and an excellent compatibility with metals, plastics and elastomers. Chemically inert, resistant to hydrocarbon fuel and liquid oxygen for use as lubricants in aircraft & supporting equipment. 

CHRISTO-LUBE® MCG 109 -65 to 260 °C - Fully fluorinated medium consistency grease, PTFE thickened. Useful in lubricating bearings, gears and actuators typically found in the semiconductor industry. Clean room compatible. Performs exceptionally well under extreme vacuum environments. Supplied in 2oz Tube and 1 lb Jar.

CHRISTO-LUBE® MCG 111 -60°C to 230°C qualified to MIL-PRF-27617G, Types I, II, III.  Medium consistency fluorinated lubricant for lubricating valve and regulator components requiring non-reactivity with harsh chemicals, fuels and solvents. Also  NSF  H-1  registered lubricant for use in food processing equipment/operations. Offered packings (5 gr/ 2 oz./4 oz./8 oz./ 1 lb tubes, 2 oz. syringes, 1 lb  jars or 1.76 lb cartridges).

CHRISTO-LUBE® MCG 114 -40°C to 140°C qualified to MIL-PRF-27617G,Type I. 

CHRISTO-LUBE® MCG 116 -20°C to 230°C qualified to MIL-PRF-27617G,Type III.

Soft (MCG 114 ) and Medium consistency (MCG 116) fluorinated lubricants for lubricating aircraft components when resistance to hydrocarbon fuel and liquid oxygen is needed. 

Guidance Systems and Instrumentation, chemically inert providing extreme low-temperature starting and running torque.

CHRISTO-LUBE® MCG 106 -75°C to 150°C Grease for bearings, gears, splines, valves and screw actuators. Contains a PFPE soluble corrosion inhibitor for protection of lubricated parts in long term storage.

CHRISTO-LUBE® MCG 117 -65°C to 250°C Wide temperature, extremely inert grease for use in vacuum systems where pressures may be as low as 10-12 Torr.

CHRISTO-LUBE® MCG 134 -50°C to 260°C Specified for rotary and push button selector switches. Contains a PFPE-soluble corrosion inhibitor for use on parts in long term storage. 

For more information on  ECL CHRISTO-LUBE® products please consult the supplied documentation and the Product Description section.

ZET-CHEMIE® brand relates to a broad range of lubricants, cleaners and corrosion protection products for metal processing developed, manufactured and distributed by by ZET-CHEMIE GmbH for 30 years.

ZET-CHEMIE® water-miscible cooling lubricants are based on mineral oil-containing emulsion concentrates or mineral oil-free solutions. They have been used many years successfully for processing all kinds of materials. Their cutting and grinding oils are based on mineral or syntethic base oils and can be used in both chip and non-cutting metal machining processes. 

ZET-CHEMIE® corrosion protection products provide plants and components with the best corrosion protection depending on the application requirements.

ZET-CHEMIE® metal cleaners effectively address requirements for cleanliness of components in metalworking. 

ZET-CHEMIE® range of industrial lubricants can be used in a wide range of applications. 

HLP hydraulic oils feature good demulsifying properties, high stability against ageing and wear protection. They correspond to DIN 51524 Part 2. Available in the viscosity range ISO 2 – 150. HLP-D hydraulic oil conforms to DIN 51524 Part 2 with excellent detergent and dispersion features, plus wear protection. Available in the viscosity range ISO 68 – 150. 

CLP high-performance industrial gearbox oils are suitable for all industrial applications. They correspond to DIN 51517 Part 3. Their load stage is greater than 12. Available in the viscosity range ISO 5 – 680.

CGLP sliding track lubricating oils are suitable for tracks and guide rails. Their good demulsifying properties prevent them mixing with cooling lubricants. Correspond to DIN 51502 CGLP. Available in the viscosity range ISO 32 – 460.

VDL ZET-compressor oils with low evaporation losses and high stability against ageing conform to DIN 51506 VDL. Used in reciprocating and rotary lobe compressors according to the manufacturer’s instructions. Available in the viscosity range ISO 68 – 150. 

ZET-CHEMIE®  paraffin-based machine oils can be used for lubricating spindles in tooling machines. Transparent and resistant to oxidation. Available in the viscosity range ISO 2 – 32. 

ZET-CHEMIE® product portfolio also includes multi-purpose, fluid, bearing, high temperature and silicon greases in all NLGi classes and all container sizes from cartridges through to drums.Also car oils for petrol or diesel engines and trucks with EURO IV emission limits.

For additional information please refer to the supplied documentation.

SOUTHWESTERN PETROLEUM LUBRICANTS LLC. (SWEPCO) is a manufacturer of technologically advanced lubricants that protect equipment assets in even the most severe operating conditions while helping companies around the world reduce overall operating costs through increased uptime and productivity and lowering maintenance and lubrication expenses. SWEPCO brand lubricants and specialty compounds are used in a wide range of applications serving the needs of Construction, Mining, Manufacturing, Marine &Transportation industries. For additional information on SWEPCO products please consult the Product Description section and the supplied documentation.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA AVIATION HYDRAULIC FLUIDS & PRESERVATIVES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA engine oils and greases please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.