ANDEROL® ROYCO® brands  of LANXESS Corporation are global leaders in lubricants with a diverse portfolio of engine, turbine, marine oils, gear, pump and bearing oils, greases, hydraulic, compressor, aviation, finished, metal working and general industrial fluids, specialty and Mil-SPEC lubricants and base stock. Please refer to the supplied table of ROYCO® product specifications.

ROYCO® Turbine engine oils (TEOs), listed below are designed to support the operation of turbine engines. and are offered in different packaging options including 55 gallon drums, 5 gallon pails, 1 US quart cans and cartons of 24 1 US cans each.

ROYCO® 481, a mineral oil based lubricant formulated with modern additives to provide oxidation and corrosion protection as well as high viscosity index for both low and high temperature fluidity. 

ROYCO® 500, a 5 centistoke synthetic lubricating oil for gas turbine engines with a blend of "hindered" esters and modern additive technology resulting in excellent performance in today’s modern gas turbines.

ROYCO® 555, an advanced 5 centistoke synthetic lubricating oil for gas turbine engines and helicopter transmissions with a blend of "hindered" polyol esters and a finely balanced modern technology additive package resulting in enhanced load carrying performance, anti-wear, corrosion protection, and excellent thermal - oxidative stability.

ROYCO® 560,  3rd generation oil developed for the increased demands of the latest technological developments in gas turbine engines.

ROYCO® 808, a synthetic based lubricating oil for gas turbine engines requiring an oil with lower volatility and higher oxidative stability.

ROYCO® 899, a 5 centistoke advanced synthetic turbine engine oil designed for use in aircraft and stationary industrial gas turbine engines operating under severe conditions.

ANDEROL® ROYCO® and NYCO oils, greases, fluids and specialty products are used in aircraft of Russian and Ukrainian manufacturers meeting the corresponding specifications. Most of their products are included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

TOTALENERGIES (formerly TOTAL) Specialties has developed a comprehensive turbine lubricant product range to support the power generation industry (whether it’s for large frame or aero-derivative turbines) with approvals by the leading turbine manufacturers. Offered in 20-liter containers and drums of 208 liters (210 kg) each.

TOTALENERGIES PRESLIA range of turbine oils include: 

a) PRESLIA mineral high-performance turbine lubricants for regulation and lubrication circuits of gas, steam and combined cycle turbines working at high temperatures. Can also be used in centrifugal and screw compressor bearing lubrication when an oil without strong anti-wear properties is needed. These oils offer long drain intervals, simplified maintenance and  ageing protection of engines and equipment in which they are used. 

b) PRESLIA GT (ISO 32 and 46) high-running temperature resistant turbine lubricants. These oils are specially designed for the lubrication (bearing, gear boxes) and regulation of gas turbines. The use of non-conventional base stocks and unique additization provides excellent thermal-oxidative stability. Preslia GT 32 and 46 should also be considered for use in steam turbine applications that requires either an ISO 32 or 46 fluid.

c) PRESLIA SE synthetic lubricants for aero-derivative turbines. Formulated with an advanced polyolester-basestock and next generation additive technology, Preslia SE Jet (5cSt POE) provides outstanding performance in the most demanding land-based aero-derivative engine applications that require a SAE AS5780 qualified fluid. PRESLIA SE HTS (High Thermal Stability) is a High Temperature/Performance oil delivering the performance expected for aeroderivative gas turbines operating in the most difficult environments.

For additional information please consult the Product Description section and the supplied documentation.

SHELL® extensive range of automotive lubricants includes engine oils for a variety of applications in cars, motorcycles as well as trucks and light or heavy duty vechicles.

SHELL® HELIX Fully Synthetic Motor Oils are manufactured from 100% synthetic base stock and high quality additives to achieve higher performance levels than both synthetic technology and mineral oils. To these high-quality synthetic base oils SHELL® proprietary Active Cleansing Technology is added to create a motor oil that helps provide superior cleansing and protection for today’s engines. SHELL® HELIX oil types include Semi Synthetic Motor Oils, Mineral Motor Oils, High Mileage Oils, Diesel Motor Oils and  ECT Oils.

SHELL® ADVANCE portfolio of motorcycle engine oils consists of  4T, 2T motorcycle and scooter oils. Their key benefits include zero loss in horsepower, fuel economy and longer drain intervals.

SHELL® RIMULA Light Duty range of oils is designed for light duty trucks. With Dynamic Protection and Dynamic Protection Plus Technology (included in Grade LD5), they protect against engine wear and tear caused by each stop and start in daily operations. The high performance additive package contains anti-oxidation components for a longer oil life in vehicles operating under high idle engine conditions. Dispersants in the additive package help break down soot and deposit build-up regardless of the type of load carried.

SHELL® RIMULA Heavy Duty engine oils offer outstanding wear protection with reduced viscosity for improved fuel economy, acid and deposit protection and wear control.

Further information can be obtained through the supplied documentation.

The TURBONYCOIL® product range of high-performance mineral and synthetic oils produced by NYCO are used in aircraft turbine (turbo-jet, turbo-prop, etc.) and piston engines, power units, turbo-reactors, APUs, starters, IDGs for aircraft, helicopters, naval vessels (aircraft carriers, frigates, etc.) and land equipment. Also used for aero-derivative turbines for land and sea applications (cogeneration, offshore power generation, gas compression). NYCO TURBONYCOIL® turbine oils are fortified with carefully selected anti-oxidant, anti-corrosion, anti-wear and extreme-pressure additives. TURBONYCOIL® oils are used in aircraft of many air forces (Mirage, Rafale, Eurofighter, F-16, F-22 and F-35) as well as on aircraft from Russian & Ukrainian manufacturers. 

Commonly used NYCO TURBONYCOIL®  products include:

TURBONYCOIL® 98: Synthetic turbine engine oil used on Russian-made aircraft

TURBONYCOIL® 160: Ester-based oil, specially designed to withstand high temperatures and remain fluid at very low temperatures

TURBONYCOIL® 321: 8 cSt mineral turbine engine oil for Russian-made aircraft

TURBONYCOIL® 3516: Mineral turbine oil designed for protection

TURBONYCOIL® 3560/3570: Single grade mineral oils for piston engines

TURBONYCOIL® 600: STD/SPC 5 cSt synthetic oil for turbojet engines

TURBONYCOIL® 601: 5 cSt corrosion inhibited synthetic turbine oil

TURBONYCOIL® 640: 5 cSt high thermal stability turbine oil

Many TURBONYCOIL®  products or their analogs by other producers are included in our offered product range and can be furnished on demand through our current network of co-operating suppliers. 

Please refer to the Product Description section, the supplied documentation or contact us for additional information and assistance.

AEROSHELL® brand relates to one of the most comprehensive and proven ranges of aviation lubricants in the aviation lubricants market worldwide. AEROSHELL® lubricants include aircraft piston and turbine engine oils, airframe and wheel-bearing greases, hydraulic fluids,  preservatives and other fluids. AEROSHELL® aviation lubricants are available in in different packaging options such as 55 gallon drums, 5 gallon pails, 1 US quart cans and cartons with 24 1 US cans each. A brief description of AEROSHELL® aviation lubricants is included in the Product Description section. Some of AEROSHELL® lubricants are already offered through our Web Platform for Supplies. Others, not currently listed, can also be furnished through our network of co-operating suppliers. For more information please refer to the supplied brief product catalogs and product descriptions,  the individual product presentations and corresponding documentation or contact us.

HENKEL LOCTITE® is the world’s leading brand and trusted choice for high-performance adhesives, sealants and surface treatments for manufacturing applications worldwide, from aircraft to furniture. LOCTITE® product portfolios includes an extensive range of adhesives, sealants, surface treatments, and other industrial chemicals exploiting different technologies including acrylic, anaerobic, cyanoacrylate, epoxy, hot melt, silicone, urethane, and UV/light curing technologies.These technologies combined with innovations result in product solutions for adhesives, sealants and functional coatings that are essential to countless industrial applications. 

HENKEL industrial sealant applications extend from automotive, electronics, aerospace, metal, and durable goods, to consumer goods, maintenance and repair, and packaging industries. In addition to LOCTITE® product lines, HENKEL also offers an extensive poduct portfolio under TEROSON®  brand providing bonding, sealing, coating, acoustic, stiffening and reinforcing solutions for OEM transportation assembly, vehicle repair and maintenance (VRM) , industrial assemblies and building industry applications. The TEROSON® brand represents a global and scalable technology, offering extensive market and application competence for innovative, reliable and complete systems solutions tailored to customer needs, using a wide range of technologies in the form of foams, foils, tapes, patches, extrusions, baffles, membranes, and pumbable/sprayable gels and liquids.

In Aerospace, HENKEL LOCTITE® product portfolios (listed separately)  include HYSOL® structural adhesives and film systems for aircraft and composite repair, aerospace potting solutions and Freketo mold release agents for the aerospace composites industry. LOCTITE® HYSOL® Aerospace adhesives are used by all major aerospace manufacturers including Boeing Commercial Aeroplanes Group and provide superior integrity to aircraft structures without added weight and ensure durable, tough bonding in composite and metal surfaces. Structural adhesive applications include joint sealing, magnet bonding, metal bonding, multiple surface bonding, noise, vibration, and harshness (NVH), plastic and composite bonding, potting and encapsulating and others.

Several HENKEL LOCTITE® and TEROSON® products are included in this listing and briefly described in the Product Description section. For LOCTITE® HYSOL® Aerospace products please refer to the respective product presenatation.

For additional information please consult the supplied documentation or contact us for non listed items.

AEROSHELL®Turbine Oil 750 is a 7½ mm2 /s synthetic mixed ester oil containing a thickener and additives which provide excellent load carrying, thermal and oxidation stability. It meets the requirements of DERD 2487 (now DEF STAN 91-98) and was developed to provide a high standard of lubrication specifically for British and Russian turbo-prop engines, especially those calling for mineral turbine oils and particularly turbo-prop engines where a good load carrying oil was required for the propeller reduction gearbox. Approved by the Russian authorities as an analogue to MN-7.5u and for those Russian turbo-prop applications which require the use of mixtures of mineral turbine oil and aircraft piston engine oil. 

AEROSHELL® Turbine Oil 750 contains a synthetic ester oil and should not be used in contact with incompatible seal materials and some paints and plastics as this oil may negatively impact their function. Available in US Quarts and Drums of 55 US Gallons. 

Specifications:

British: Approved DEF STAN-91-98 (replaces DERD 2487)

French: Equivalent to AIR 35174A

Joint Service Designation: OX-38

NATO: O-149 (equivalent O-159)

Russian: Analogue to TU 38.1011722-85 Grade MN-7.5u

Approvals:

Honeywell: Auxiliary Power Units (some models)

Pratt & Whitney Canada: PT6 (some models)

Rolls-Royce: Dart, Tyne, Avon (some early models only), Gnome, Pegasus, Palouste, Nimbus, Proteus, Orpheus, Olympus 200 and 300

Sikorsky: S-61N transmissions

Soloviev: D30 engine

Turbomeca: Astazou, Bastan, Turmo, Artouste, Arriel, Malika

For more information please refer to the attached documentation.

NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to our AEROSHELL® Aviation Lubricants Product Overview presentation or contact us for additional information or assistance on non listed products.

AEROSHELL® 100 Series SAE 50 Grade Aviation Piston Engine Oils are  straight mineral oils blended from selected high viscosity index base oil. They are offered as AEROSHELL® 100 mineral break in oil with no additives, AEROSHELL® W100 mineral ashless dispersant oil for normal use and  AEROSHELL® W100 PLUS mineral ashless dispersant oil with a friction modifier/anti-wear additive package. 

The specially blended high viscosity index base oil in AEROSHELL® 100 oils has been designed to provide effective protection to engine components compared to conventional mineral oils. Intended for use when an oil without a dispersant additive is required during the break-in of  new aviation piston engines or those recently overhauled.They meet the SAE specification J-1966 Grade 50. 

AEROSHELL® W oils were the first non-ash dispersant oils to be used in aircraft piston engines. They combine nonmetallic additives with selected high viscosity index base stocks to give exceptional stability, dispersancy and anti-foaming performance. These additives leave no metallic ash residues that can lead to deposit formation in combustion chambers and on spark plugs, which can cause pre-ignition and possible engine failure.AEROSHELL® W100 oil includes very small amounts of pour point depressant to improve fluidity at very low temperatures and an anti-oxidant. This helps ensure complete confidence and peace of mind knowing that your aircraft will perform reliably in between scheduled overhauls. Approved to SAE specification J-1899 Grade 50. 

AEROSHELL® W100 Plus single grade oils combine the single grade, ashless dispersant performance found in AEROSHELL® Oil W100 and the anti-wear/anti-corrosion additives of AEROSHELL® Oil W15W-50 Multigrade. They are approved for all aviation civil aircraft piston engines. Approved to SAE specification J-1899 Grade 50.

AEROSHELL® 100 Series oils have military qualification approvals. Common packing options include 1 US Quart bottles, cases of 6  or 12 1 US Quart bottles, jugs of 5 liters, pails of 5 US Gallons, and drums of 55 US Gallons. Please also refer to the attached documentation.

 NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to our AEROSHELL® Aviation Lubricants Product Overview presentation or contact us for additional information or assistance on non listed products.

FLAMEMASTER® CHEMSEAL® range includes firewall, fuselage, fuel tank, windshield, access door and other specialty sealants and adhesives to cover a variety of aviation applications. For additional information please refer to the Product Description section and the supplied documentation. For non-listed products please contact us.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates.

CHEMETALL® NAFTOSEAL® polysulphide sealants are specifically designed to meet the challenging  requirements of the aerospace industry for multi-purpose applications. The OEM and maintenance sectors both  benefit from a full range of easy-to-use and approved aircraft sealant technologies. The application characteristics of NAFTOSEAL® enable higher production rates. In addition NAFTOSEAL®  sealants offer  eco-friendly properties: all components are chromate-free, solvent-free or very low in solvent content. 

Key Features & Benefits:

 Free of chrome and solvents/low in solvent content

 Low temperature flexibility

 Fast tack-free and cure times for high production rates

 Good adhesion to various substrates

 Excellent chemical resistance

 High elasticity and resilience

 Good thixotropic properties, no slump

 Low and medium density products available

 Applications:

CHEMETALL® NAFTOSEAL® multi-purpose aircraft sealants can be used for all aircraft applications requiring sealants, such as fuel tank, fuselage, floor panels and aerodynamic smoothing. Adhesion promoters, tool and equipment cleaning technologies and mixing devices round-off our portfolio and cover all aspects for an efficient and safe sealant application.

Please refer to the supplied documentation for features and specifications of individual products.

EXXONMOBIL® MOBIL® Gear Lubricants are formulated to help protect and extend the life of transaxle, rear axle and differential gears. They provide outstanding protection, even in some of the most extreme operating conditions. They include:

MOBIL® 75W-90 and 75W-140 Multi-Purpose Automotive Gear Lubricants designed to help meet the highest level performance requirements of modern passenger vehicles in all types of operating conditions including limited slip applications, as well as, deliver outstanding power transfer performance.

MOBIL® 80W-90 and 85W-140 Commercial Gear Oils engineered for performance in heavy-duty commercial transmissions, axles and final drives where extreme pressures and shock loading are expected. Applicable for on-highway light and heavy-duty trucks, buses, vans and cars.

MOBIL® MOBILGEAR® XMP Series Extra High Performance Industrial Gear Oils designed to provide optimum equipment protection and oil life even under extreme conditions. Recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. Based on high quality mineral base stocks and an advanced proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing but also a high level of resistance against micropitting fatigue. They also offer the potential for improved lubrication of gearbox rolling element bearings and outstanding rust and corrosion protection versus conventional gear oils, including seawater and acidic water protection. Offered in different ISO Grades they conform to different specifications and approvals.

MOBIL® Mobilgear™ SHC™ XMP  Synthetic Wind Turbine Gear Oils designed to provide optimum equipment protection of wind turbine gearboxes, including steel-on-steel spur, helical and bevel gears, operating under the extreme conditions typical of wind turbines. They contain an advanced and carefully blended proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing and a high level of resistance against micropitting fatigue. They offer outstanding rust and corrosion protection in applications where salt water and acidic water protection are required. Available in 2 ISO Grades, Mobilgear™ SHC™ XMP 320 and Mobilgear™ SHC™ XMP 460.

For additional information please consult the Product Description section and the supplied documentation.

MOBIL® also offers MOBILGEAR® SHC™ XMP  Synthetic Wind Turbine Gear Oils designed to provide optimum equipment protection of wind turbine gearboxes, including steel-on-steel spur, helical and bevel gears, operating under the extreme conditions typical of wind turbines. For more information please refer to our product presentation on EXXONMOBIL® MOBIL® Wind Turbine Lubricants.

NSL Aerospace distributes aerospace adhesives and sealants. Their FAA-approved, PMA sealants are effective replacements to respective PRC/PPG products with the same quality, lower cost reulting in cost savings and shorter lead times. Custom packaging and custom quantities are also offered. NSL product portfolio includes aircraft windshield sealants, fuel tank sealants, aircraft window sealants, and several rapid-cure or corrosion-inhibitive sealants.

LIQUI MOLY is Germany's most popular brand of motor oil. It is also one of the few full range brands in the world with more than 4,000 premium quality motor and gearbox oils, fuel and oil additives, care products, chemical problem-solvers and service products.

LIQUI MOLY MOLYGEN New Generation range of fully synthetic motor oils indicate their Molecular Friction Control (MFC) technology with their deep green visual signature. Tungsten, a key component in MOLYGEN oils, is a rare metal with an extremely high melting point used in many high-temperature applications. As an additive in LIQUI MOLY MOLYGEN oils, Tungsten leads to a significant friction reducation and a corresponding reduction of engine's wear and extension of engine life.  Less friction can also lead to reduced engine fuel consumption as less energy is required to overcome the internal losses. MFC technology in MOLYGEN New Generation oils leads to smoother engine running with optimum oil pressure, a long service life, and reduced fuel consumption and emissions. 

LIQUI MOLY MOLYGEN  New Generation motor oils are offered in some of the most common viscosities, including 0W-20, and 5W-20 through 5W-50. They are designed to meet or exceed standards including the latest from General Motors and those of BMW, Mercedes-Benz, Honda, Subaru, and more. A brief presentation of different oils in the MOLYGEN New Generation range is provided in the Product Description section. Please also refer to the supplied LIQUI MOLY Oil Guide on different applications.

Note: Supplied information is provided for reference only. For the selection of the suitable motor oil please observe the manufacturer's instructions.

For more than 50 years, PPG AEROSPACE® – PRC-DeSoto® has been a leader in the development of products fundamental to aerospace manufacturing, maintenance, and repair. The company manufactures and provides a unique group of products including aircraft windshields and windows to the commercial, regional, military and general aviation segments as well as aircraft primers, coatings and sealants for aircraft structures used in aviation and milirary applications. In addition, high performance Industrial Adhesives and Sealants  are also offered to provide protection from fuel and petroleum exposure as well as sealants for Telecom and Utility applications.

PPG AEROSPACE® – PRC-DeSoto® products are offered in different classes, specifications, application times and convenient container options including SEMCO Semkit® packages containing both the base and accelerator in one pack.

3 classes are generally used for the classification of sealants (A, B and C) although an S class does apply in some cases where a sealant can be sprayed.

Class A – Brush application, generally used on fasteners

Class B – Thicker consistency, used for fillet and injection seals

Class C – Thinner than Class B, used for fay sealing

Application times are expressed in hours (2 indicating 2 hours 1/2 indicating half an hour).

PPG AEROSPACE® integral fuel tank sealants for aerospace applications are high-performance products designed to provide long-lasting protection and sealing for aircraft fuel tanks. These sealants, such as the PR-1422 and Pro-Seal 890 were the first fully jet fuel resistant sealants. They offer excellent adhesion, flexibility, and resistance to fuels, oils, and other chemicals. They ensure leak-proof integrity under various temperature and pressure conditions, contributing to the overall safety and efficiency of aircraft operations. 

PPG’s Aircraft Fuel Tank Sealants are included in this presentation while respective Aircraft Fuselage, Firewall Sealants and Corrosion Inhibitive Sealants and Coatings are separately presented.

For additional information on offered products please consult the Product Description Section and the supplied documentation.

EXXONMOBIL® Mobil Avrex™ S Turbo 256  Gas Turbine Lubricant is a combination of a highly stable synthetic base fluid and a unique chemical additive package. Thecombination provides outstanding thermal and oxidative stability to resist deterioration and deposit formation in both the liquid and vapor phases, as well as excellent resistance to foaming. The effective operating range of this lubricant is between -54°C and 176°C (-65°F and 350°F). The pour point is below -60°C (-75°F). The product has a high specific heat in order to ensure good heat transfer from oil-cooledengine parts. In extensive laboratory testing and in-flight performance, Mobil Avrex™ S Turbo 256  exhibits excellent bulk oil stability at temperaturesup to 176°C (350°F). The evaporation rate at these temperatures is low enoughto prevent excessive loss of volume. It is uniquely suited for use when extreme low temperatures restrict the use of higher viscosity engine oils

Mobil Avrex™ S Turbo 256 Gas Turbine Lubricant (QPL listed as RM 248A) is recommended for aircraft gas turbine engines in commercial and military service, particularly where start-up temperatures are below -40°C (-40°F). The product is approved against U.S. Military Specification MIL-PRF-7808, Grade 3 while it is also compatible with other synthetic gas turbine lubricants meeting MIL-PRF-7808 or MIL-PRF-23699 specifications (*). The product is compatible with all metals used in gas turbine construction, as well as with F rubber (Viton A), H rubber (Buna N), and FVMQ rubber (fluorosilicone).

(*) Mixing of Mobil Avrex™ S Turbo 256 Gas turbine lubricant  with other products is not recommended because the blend may result in some loss of its performance characteristics.

Integral fuel tanks in aircraft form part of their wing or fuselage structure and they are commonly met in high-performance aircraft as they are the lightest, with most space per unit of weight. Rigid removable aircraft fuel tanks are also used in some aircraft, typically made of stainless steel or aluminum alloy and riveted together. Flexible fuel tanks (aka fuel bladders) are fuel containers made of reinforced flexible materials. They share many characteristics with rigid tanks but they require a smaller opening in the aircraft to be installed. Also used in other sectors for rapid deployment of storage facilities or increase capacity of fuels (gasoline, diesel or jet fuel) but also for water, oils, or as emergency units. They are made of high-quality PVC, EVA, and TPU (Thermoplastic Polyurethane) coated fabrics, are fully UV resistant, and can operate at temperatures from -50°C to +90°C, ensuring durability and reliability under the most demanding conditions. Made by different manufacturers, these tanks conform to commercial standards while some of them are ballistic-tolerant or engineered for mission-critical military or aerospace uses, meeting respective commercial (such as TSO-C80 and 14 CFR Part 29) as well as military specifications like MIL-DTL-6396, MIL-DTL-5578, and MIL-DTL-27422.

Related materials such as tank cleaners/degreasers, adhesives & sealants are also offered and included in this presentation. 

Tank adhesives/sealants come in different compounds (chemical composition) and respective prices, and their selection heavily depends the material of the tank they shall be applied and the sealing content (water, oil, fuel, etc). The selection and use of any sealant during tank construction, maintenance or repair should always ensure sealant's compatibility with tank composition and chemical resistance to fuels or other fluids to be sealed. Commonly used sealants for tanks span from PVC, the more cost-effective but with low temperature resistance & toxic when burned, to more expensive but safer Silicone ones, with excellent flexibility, high and low-temperature resistance and biocompatibility, to Polyurethane sealants, durable but not so chemically resistant as Polysulfide, and Polysulfide rubber sealants, flexible, and extremely resistant to gasoline, ethanol and many other chemicals. 

For aircraft integral fuel tanks and rigid removable fuel tanks made of metals, two-part Polysulfide sealants are often the preferred choice. For flexible Polyurethane/Thermoplastic Polyurethane (PU/TPU) fuel tanks (bladders) the bonding/sealing material itself is often a specialized PU/TPU formulation for enhanced flexibility and durability,chemical resistance to hydrocarbon fuels, solvents, and oils, impact resistance, and bonding strength compared to traditional formulations. Silicone sealants are also used depending on application requirements.

Supplied either as OEM parts or as parts of our own labelled (AVIATIONEU NEW ERA) product lines. 

Although gearboxes and transmissions serve the same operational scope their lubricants differ. Generally, gear oils are used in manual gear boxes and transmission fluids in automatic transmissions. However, oils used in manual gearboxes are thicker, more viscous oils to withstand high temperatures and be able to function under extreme pressure. Those used in automatic transmissions are less viscous and thinner gearbox fluids which contain detergents and act as coolants while they contain further additives to improve their life expectancy.

BP® ENERGEAR range of automotive gear oils have been designed for use in a wide range of gear units with spur, bevel or helical gear design, including synchronized manual gearboxes, transmissions and axles under moderately severe load and pressure conditions. They were applicable for passenger cars, light and heavy trucks as well as agricultural and building machinery providing effective protection of gear transmissions and prolonging component life. The Energear EP range conformed to the requirements of API GL-4.

BP® ENERGEAR gear oils are replaced by respective BP® CASTROL® gear oils and transmission fluids developed to protect against wear, prolong gear life, and help to deliver optimum gear performance. They  are formulated to meet or exceed the highest industry standards featuring thermal stability, wear protection, seal compatibility and hydrolytic stability. A range of gear and transmission lubricants are offered for mobile and stationary equipment.

For further information on BP® CASTROL gear lubricants please refer to the Product Description section and the supplied documentation.

Petroleum distillates include a range of products such as mineral oils, naphtha solvents, heavy fuel oils, waxes, benzenes and others used in many industrial and other applications. They are offered as part of our own labelled (AVIATIONEU NEW ERA) product portfolio or as OEM products (separately listed).

Naphtha Solvents are chemical product comprised of volatile and extremely flammable liquid hydrocarbons  derived from the refining of crude oil but can also be produced from natural gas condensates or petroleum distillates. Naphtha solvents are very strong and versatile, often used in hydrocarbon cracking, laundry soaps, and cleaning fluids among other applications. Those conforming to Mil-Spec TT-N-95 or its latest Rev. B (TT-N-95B) are aliphatic naphtha acrylic cleaning solvents available in Type I or Type II for use in organic coatings and as a cleaner for acrylic plastics. Usual packings include 1 USG cans, 5 USG pails or 55 USG drums.

LUKOIL® LUBRICANTS brand relates to an extensive range of lubricants serving the needs of applications in different markets worlwide, from passenger cars, commercial vehicles and small engines to aviation, marine and industrial uses. LUKOIL® LUBRICANTS portfolio includes among others motor oils, transmission, gear, compressor, turbine, gas engine, machine sideway, rolling mill, circulating, quenching oils, hydraulic and coolant fluids and greases. They are available in in different packaging options. 

A brief description of LUKOIL® lubricants  which can be furnished through our network of co-operating suppliers is included in the Product Description section. For additional information please refer to the supplied documentation or contact us.

Note: Supplied information is provided for reference only. For the selection of the suitable lubricant please observe the manufacturer's instructions.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA GREASES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA ENGINE HYDRAULIC FLUIDS & PRESERVATIVES and ENGINE OILS please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.