NYCO HYDRAUNYCOIL® range of products includes mineral and synthetic fluids for hydraulic systems and circuits subjected to high and low temperatures, resistant to fire, extreme pressure and corrosion, and biodegradable. NYCO HYDRAUNYCOIL® fluids are shock-strut fluids. The main hydraulic fluids used in civil aviation are phosphate ester based fluids produced by Exxon-Mobil and Eastman Skydrol.

Different NYCO HYDRAUNYCOIL® hydraulic fluids are available addressing the requirements of specific sectors/applications:

FH & EL series for the Automotive & Industrial sectors,

FH 14 recoil and hydraulic system fluid

FH 19 recoil and hydraulic system fluid for Navy vessels

FH 51 hydraulic fluid used on all types of aircraft

FH 5 AW / 6 AW fluids dedicated to Boeing aircraft in operation, after overhaul and under storage. Also available for Airbus aircraft.

FH 42 synthetic shock strut fluid for new generation aircraft

FH 2 helicopter and fighter jet system fluid

Applications

Aeronautical: damping fluid for landing gears (initial assembly at the main OEMs), fluids for helicopters and combat aircraft, actuators, THS (Tail Horizontal Stabilizer), test bench, etc.

Military: mobile equipment, artillery, gun-mounts, tanks, missile hydraulics, etc.

Automotive: biodegradable hydraulics for public works, lifting and marine equipment, etc.

Industrial: dams, drill bits, etc.

For more information on NYCO HYDRAUNYCOIL® fluids please refer to the supplied documentation.

NYCO and ANDEROL® ROYCO® oils, greases, fluids and specialty products are used in aircraft of Russian and Ukrainian manufacturers meeting the corresponding specifications. Most of their products are included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

ASG CORPORATION ASG KUBER brand relates to an extensive product portfolio offering solutions for applications in the Defence, Aerospace, Marine Ground, Automotive, Rail and Industrial sectors, including parts, tools, lubricants, lighting, batteries and others.

ASG KUBER MIL-R-25134 B Paint Remover & Lacquer Solvent is a thickened, non phenolic aircraft paint stripper which meets the requirements of BOEING Document D6-17487 and MIL-PRF-25134 C. MIL-R-25134 B is a viscous liquid developed to remove multiple coats of paint. It clings to vertical as well as the underside of horizontal surfaces. MIL-R-25134 B can be applied as received by brushing or spraying. It is specially designed to remove lacquer and enamel coating finishes from metal surfaces of aircraft or other surfaces while it can also be used for stripping various types of paints such as varnish, zinc chromate primer, epoxy, polyurethane, etc.

Allow MIL-R-25134 B sufficient dwell time for thorough loosening or blistering of the paint. When paint is loose, thoroughly agitate all areas with a stiff bristle brush. The complete removal of the paint residues is accomplished with high pressure, high volume, cold water or with a steam cleaning machine. Normally one coat of MIL-R-25134 B is sufficient to remove more than one paint coating. Where multicoat systems have to be removed, it may be necessary to use more than one application of MIL-R-25134 B.

Product Features & Benefits

Safe to all metals.

Very effective, normally removes more than one coating of paint.

Non-flammable.

Free of phenolics.

Easily rinsed with cold water.

Can be applied by brush or non-atomizing spray methods.

Used as received (Ready-To-Use). No mixing or dilution required.

Used at room temperature.

An integral part of INNOSPEC Inc., INNOSPEC FUEL SPECIALTIES business unit is a leading developer and supplier of specialty additives for petroleum-based fuels, coal, and biofuels used in a diverse scope of applications.

Corrosion Inhibitor additives form part of INNOSPEC FUEL SPECIALTIES product lines. They are designed to protect against internal corrosion of fuel storage and distribution systems  and they are used extensively in storage, pipeline and aviation applications.They protect against storage vessel and pipeline leakage, contamination of fuel with particulates and blockage of filters and screens from corrosion material. 

INNOSPEC’s approved aviation fuel Corrosion Inhibitors/Lubricity Improvers (CI / LI) serve a dual function, they improve the fuel’s lubricity as well as protecting the fuel system against corrosion.Two products in the INNOSPEC’s DCI product range (DCI-4A and DCI-6A) hold numerous approvals for aviation fuel usesare approved for use in jet fuels. DCI-4A is a preferred inhibitor for aviation fuels while DCI-6A, a ‘stronger’ corrosion inhibitor than DCI-4A is preferred for all ground fuels and for pipeline corrosion protection, due to its low treat rate.

INNOSPEC's STADIS® aviation fuel Static Dissipators  aim to enhance safety by preventing static charge build up when refining or handling fuels. 

STADIS® 450 is a non-metallic distillate fuel additive that increases the electrical conductivity of distillate fuels and helps reduce hazards associated with their mixing, transfer, and shipment.It can be used in JP-8, JP-5, Jet-A1 and Jet B fuels. STADIS® 450 is the premium static dissipator additive (SDA) in use today and  the only SDA approved worldwide for use in civilian and military aviation turbine jet fuels. STADIS® 425 is intended for use in  ground fuel applications and specifically designed for use in applications such as diesel fuels and gas oil.

For more information please refer to the Product Description section and the supplied documentation. 

SHELL® extensive range of industrial lubricants, including their GTL (gas-to-liquids) technology oils, highlight the difference between industry standards and industry-leading performance. 

SHELL® range of industrial lubricants include lubricating oils for a variety of applications, hydraulic oils, coolants and greases.

SHELL® lubricating oils can be used on turbines (TURBO turbine oils separately presented), rotary and reciprocating compressors (CORENA), stationary gas engines (MYSELLA), power-generation (ARGINA & GADINIA), transformers (DIALA), axle, gear and transmission systems (SPIRAX ), slideways (TONNA), as bearing & circulating oils (MORLINA), process oils (RISELLA X) as well as for worm drive gears (OMALA). TELLUS hydraulic oils, Coolants and GADUS greases are also offered as part of SHELL® range of industrial lubricants. They are briefly presented in the Product Description section while further information can be obtained through the supplied documentation.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates. CHEMETALL® ARDROX® brand is the leading brand for aerospace surface solutions including paint and scale removers, exterior aircraft & gas turbine engine compressor cleaners, corrosion inhibiting and non-destructive testing protective compounds for both aircraft and aero engines and materials.

CHEMETALL® ARDROX® Corrosion Inhibiting Compounds' (CIC) range includes AV 8, AV 15 (aka DINITROL AV15), general purpose AV 25, the most versatile AV 30 and AV 40.  They are water displacing, long-term corrosion inhibitors highly  penetrating  areas exposed to severe corrosion conditions and combining good penetration properties with excellent corrosion inhibiting characteristics and a low applied film weight. Their viscosity is optimized to ensure an effective protective coating and promote penetration into otherwise inaccessible areas of the airframe. Applied as a coating to protect metals in airframe structures, on painted and unpainted surfaces, and in aerospace components to safeguard metals from corrosion. In areas exposed to severe corrosion conditions AV 8 should be overcoated with AV 100D - a heavy duty, waxy, firm film CIC.

CHEMETALL ARDROX® CIC are offered in different packaging options and comply with different specifications including Boeing BMS, MIL-PRF-16173, McDonnell Douglas DMS, Airbus AIMS and others. They are classified as HAZMAT Hazardous Materials UN Number: UN1139 - UN Class: 3.

CHEMETALL ARDROX® 3140 Corrosion Preventative contains film forming agents, antioxidants and corrosion inhibitors in a refined hydrocarbon solvent base. Provides long term protection for raw materials, sub-assemblies and finished components, which are to be stored or used in corrosive environments. 

CHEMETALL ARDROX® 6367 Turbine Engine Cleaner is a liquid concentrate which consists of an aqueous blend of biodegradable surfactants and corrosion inhibitors formulated to clean the compressor sections of gas turbine engines. It is solvent free and removes deposits, oils and their oxidation products in the compressor area. Contains corrosion inhibitors providing protection against corrosion for up to 3 days during engine standstill times. Does not contain any EDTA, NTA or their salts. Regular cleaning with Ardrox® 6367 helps maintain peak engine efficiency and reduces maintenance and fuel cost. Ardrox® 6367 is compatible with recognized antifreeze materials used during cold weather cleaning. Approved for use in a range of turbine engines including CFM56 CP5060 , GE SPM 70-80-04, Ref. C04-140, P&W SPM 70-12-00, SPMC 87-10A, Rolls Royce CSS 260 and others. Offered in different packaging options including 25-liter pails and 55 USG drums.

For additional information please consult the Product Description section or the attached documentation.

McGEAN CEE-BEE™ and HONEY BEE™ Lavatory Maintenance product portfolio includes CEE-BEE™ extensive range of cost-effective top-performing cabin cleaners, deodorizers and fresheners available in a variety of formats and HONEY BEE™ toilet system cleaners, the most effective in the industry in removing scale and organic deposits in both vacuum and recirculating toilet systems. Their use results in clean, well-maintained lavatory systems ensuring reliability, preventing costly flight delays and delivering a pleasant, fresh-smelling environment for travelling passengers. Their waste line, tank & component cleaners are ideal for the maintenance, overhaul and repair of aircraft lavatory systems and component parts. They meet OEM and AMS specification requirements. Respective product lines include:

HONEY BEE™ 60 & 60NP acidic liquid aircraft lavatory cleaners, the first developed for removing hard water scale from vacuum and recirculating toilet systems and the second for removal of hard water scale and accumulated waste materials from toilet systems in aircraft. Both are thickened for better cling on vertical surfaces and can be used for removal of stains from stainless steel. They can be applied directly to scale deposits for local cleaning, eliminating the need for removal of toilet systems. Safe on stainless steel, most plastics and good quality paint.

HONEY BEE™ 60T and 60 TNP, acidic liquid cleaners, the first developed for removal of hard water scale from vacuum toilet system lines, lavatory holding tanks & components in immersion tank applications and the second for removal of hard water scale and accumulated waste materials from vacuum toilet systems in aircraft, preventing waste line clogs. Both can be applied directly to scale deposits in toilet bowls for spot removal and they are safe on stainless steel, acrylic plastic and good quality paint. 60 TNP effectively removes stains from stainless steel lavatory components, titanium waste lines and waste holding tanks. Approved for use with the Cee-Bee® Vacuum Cleaning Kit. Surfactants biodegradable.

Product lines for Lavatory Deodorants, Fresheners & Cleaners include:

CEE-BEE™ Aerofresh 35 Concentrated Lavatory Deodorant & Cleaner

HONEY BEE™ 20C  Highly Concentrated Lavatory Cleaner & Deodorizer

HONEY BEE™ 24 - Powerful aircraft lavatory deodorant 

HONEY BEE™ 26 - Cleaner & Deodorizer for Aircraft Lavatories 

HONEY BEE™ Deodorant Pak 44 -Powerful aircraft toilet deodorant

HONEY BEE™ Aerogel “Sparkle” Air Freshener

HONEY BEE™ Freshener 50 - In-Flight Liquid Cleaner & Deodorizer

HONEY BEE™ Freshener Soak 50C - Lavatory Deodorant

HONEY BEE™ 90 Aircraft Interior Surface Cleaner & Deodorizer

HONEY BEE™ 90 RTU General-Purpose Aircraft Interior Cleaner & Deodorizer

For additional information please consult the supplied documentation.

Manufactured by LIGHTHOUSE FOR THE BLIND INDUSTRIES (LHB), SKILCRAFT® PRO LUBE (also known as SKILCRAFT® PRO LUBE II) is a general-purpose lubricating oil preservative composed of highly refined mineral oil with additives.It is a rust and corrosion inhibitior, formulated to lubricate small arms and automatic weapons, protect them from corrosion, and displace water at low temperatures. This product is approved to Federal Specification MIL-PRF-32033 and meets Quality Parts List (QPL) No. LP-7053A. It is ideal for use within fuel systems and combustion chambers of engines, in addition to other general-purpose lubrication needs. Available Packaging Options: 12.5 oz. Aerosol Cans, Case 12X12.5 oz. Aerosol Cans, Case 16X1 US Quart Cans.

HAZMAT Information: HAZMAT UN Number:1950, Hazard Class 2.2 (Aerosol Can) – Not Regulated (USQ Can)

For additional information please consult the supplied documentation.

SKILCRAFT® PRO LUBE II EU Regulation REACH/SVHC Status

SKILCRAFT® PRO LUBE II, as a MIL-PRF-32033 specification compliant product, generally does not contain substances of very high concern (SVHC) as defined and typically restricted by the EU Regulation REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) regulation. However, as ABILITYONE/SKILCRAFT® products are sourced from a network of manufacturers with slight formula variations, product conformance to REACH/SVHC requirements for import into the European Union has to be confirmed with our supplier at the time of ordering.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA GREASES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA ENGINE HYDRAULIC FLUIDS & PRESERVATIVES and ENGINE OILS please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

AEROSHELL® produces a range of mineral and synthetic hydrocarbon hydraulic fluids, lubricating fluids and preservatives supporting airraft systems' operation and longer preservation.  A non-exhaustive list of offered products is presented below. Additional information is available in the Product Description section. Due to the continuous expansion of our offered product portfolio some AEROSHELL® products may not be listed yet in our Web Platform but they may still be offered through our supply network. Please contact us for additional information or assistance.

AEROSHELL® Fluid 3, general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. 

AEROSHELL® Fluid 12, synthetic ester oil used for general aircraft lubrication as well as for aircraft gyro instrument gimbal bearings, separately lubricated high speed turbines and compressors, aircraft air cycle equipment and electronic equipment. Particularly suitable when an oil with a low evaporation rate is required at high and low temperatures. Approved to MIL-L-6085C.

AEROSHELL® Fluid 31, synthetic hydrocarbon based aircraft hydraulic fluid with greatly improved fire resistance characteristics when compared with conventional petroleum products. Approved to MIL-PRF-83282D.

AEROSHELL® Fluid 41, mineral oil based  "super clean" hydraulic oil manufactured to a very high level of cleanliness and possesses improved fluid properties. It is suitable for use with brake and hydraulic systems with synthetic rubber seals.

AEROSHELL® Mineral Fluid 5M-A, highly refined, medium viscosity mineral oil with an extreme pressure additive and additives for good oxidation and corrosion protection. No longer produced. Limited availability till stock exhaustion. A possible alternative could be NYCO Nycolube 3525 meeting the same specification MIL-PRF-6086F.

AEROSHELL® Fluid 61, synthetic hydrocarbon base hydraulic fluid specifically inhibited to provide excellent oxidation stability for the oil. Approved to MIL-PRF-46170 Type I.

AEROSHELL® Fluid 602, synthetic hydrocarbon coolant fluid for aircraft electronics. No longer produced. Limited availability till stock exhaustion. Consider CASTROL® BRAYCO™ 889 meeting same specification MIL-PRF-87252E .

AEROSHELL® Fluid 71, preservative mineral hydraulic fluid of improved cleanliness. It is composed of a mineral base oil with an additive package which results in a product with excellent corrosion preventative properties as well as excellent oxidation stability, and good anti-wear characteristics.

HENKEL BONDERITE® is the premier brand for surface technology and process solutions that create competitive advantages across the industrial manufacturing marketplace.  Trusted for reliability, sustainability & proven results, BONDERITE® processes deliver superior cost-in-use and operational efficiency through a broad portfolio of cleaner, surface treatment, coating & lubricant materials along with engineering services.

HENKEL BONDERITE® range of surface treatment products for the Aerospace industry includes TOUCH-N-PREP® coatings pens, wipes, ready-to use coatings for light metals, liquid cleaners and paint strippers. An overview of these products is included in the Product Description section. For additional information please consult the supplied documentation.

DONALDSON® COMPANY INC. is one of the largest filtration manufacturers in the world, providing filters and filtration components for a wide range of applications including commercial airliners, military applications and general aviation aircraft, agriculture and forestry, construction, mining,  truck, and bus manufacturers as well as other markets.

DONALDSON® AEROSPACE FILTRATION (AFS) cleaners/degreasers and oils are used in inlet barrier filters to bring the filters back to full capacity after their cleaning process. Offered in 1 US gallon and 5 US gallon sizes. Filter Cleaning Kits are also offered containing 1 US gallon of AFS Oil, 1 gallon of AFS Cleaner/Degreaser, a 16-ounce bottle and spout for re-oiling, a cleaner/degreaser sprayer, and seamer pliers (2-inch and 6-inch).

For additional information please consult the supplied documentation.

SOCOMORE® produces waterbased and gel type aerospace cleaners which can be used for cleaning of aircraft exteriors and parts.  MAGCHEM® is a sister company of SOCOMORE® producing solutions for the preparation protection of metal surfaces or composite materials in the construction and maintenance of the transport industries including solutions for aerospace cleaning, surface preparation and metalworking processes. MAGCHEM® product range includes all-purpose cleaners, liquid detergents, paint removers, degreasing solvents, deoxidizers, and others.

For additional information and specifications please refer to the supplied documentation.

ZET-CHEMIE® brand relates to a broad range of lubricants, cleaners and corrosion protection products for metal processing developed, manufactured and distributed by by ZET-CHEMIE GmbH for 30 years.

ZET-CHEMIE® water-miscible cooling lubricants are based on mineral oil-containing emulsion concentrates or mineral oil-free solutions. They have been used many years successfully for processing all kinds of materials. Their cutting and grinding oils are based on mineral or syntethic base oils and can be used in both chip and non-cutting metal machining processes. 

ZET-CHEMIE® corrosion protection products provide plants and components with the best corrosion protection depending on the application requirements.

ZET-CHEMIE® metal cleaners effectively address requirements for cleanliness of components in metalworking. 

ZET-CHEMIE® range of industrial lubricants can be used in a wide range of applications. 

HLP hydraulic oils feature good demulsifying properties, high stability against ageing and wear protection. They correspond to DIN 51524 Part 2. Available in the viscosity range ISO 2 – 150. HLP-D hydraulic oil conforms to DIN 51524 Part 2 with excellent detergent and dispersion features, plus wear protection. Available in the viscosity range ISO 68 – 150. 

CLP high-performance industrial gearbox oils are suitable for all industrial applications. They correspond to DIN 51517 Part 3. Their load stage is greater than 12. Available in the viscosity range ISO 5 – 680.

CGLP sliding track lubricating oils are suitable for tracks and guide rails. Their good demulsifying properties prevent them mixing with cooling lubricants. Correspond to DIN 51502 CGLP. Available in the viscosity range ISO 32 – 460.

VDL ZET-compressor oils with low evaporation losses and high stability against ageing conform to DIN 51506 VDL. Used in reciprocating and rotary lobe compressors according to the manufacturer’s instructions. Available in the viscosity range ISO 68 – 150. 

ZET-CHEMIE®  paraffin-based machine oils can be used for lubricating spindles in tooling machines. Transparent and resistant to oxidation. Available in the viscosity range ISO 2 – 32. 

ZET-CHEMIE® product portfolio also includes multi-purpose, fluid, bearing, high temperature and silicon greases in all NLGi classes and all container sizes from cartridges through to drums.Also car oils for petrol or diesel engines and trucks with EURO IV emission limits.

For additional information please refer to the supplied documentation.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA AVIATION HYDRAULIC FLUIDS & PRESERVATIVES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA engine oils and greases please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

CRC® INDUSTRIES is a global leader in the production of specialty chemicals for maintenance, repair and operational professionals and do-it-yourself applications. CRC® product portfolio includes an extensive range of cleaners, corrosion inhibitors, lubricants & penetrants, adhesives, appearance and specialty products serving the automotive, industrial, electrical, marine, heavy truck, hardware and aviation markets. Selected products are briefly presented at the Product Description section and additional information can be found in the supplied documentation.

UTC AEROSPACE GOODRICH® Care & Maintenance product portfolio includes a range of different products. 

GOODRICH® ShineMaster™ Prep is a deep-cleaning surface treatment that prepares de-icers for the ShineMaster™ luster. It cleans the de-icer and removes residual coatings as the first step in the de-icer care process. Removes dirt, grease, oil, silicone products and other contamination as well as residual ShineMaster™ cosmetic polish before reapplication. The only cosmetic treatment system approved for use on Goodrich de-icers. As a secod step GOODRICH® AgeMaster #1 rubber preservative can be used  that replenishes the emollients destroyed by ozone and protects against weather. For use on neoprene de-icers only. GOODRICH® ShineMaster™ cosmetic coating can then be applied as the third step in your de-icer care process. ShineMaster™ offers de-icers a lustrous shine and cosmetically enhances de-icers by coating the exterior surface. This cosmetic treatment is easy to apply, dries quickly and provides a long-lasting shine.

For additional information please consult the supplied documentation.

Manufactured by RADCO INDUSTRIES, RADCOLUBE® is an exceptional 3-in-1 Gun Oil for cleaning, lubricating, and short-term preservation of small and large caliber firearm platforms making their maintenance safe & convenient. With its advanced formulation and adherence to industry standards, this gun oil guarantees superior performance, reliability, and longevity for firearms used in diverse environments. It is the trusted brand of the US Military, Law Enforcement, and Competitive Shooters across the globe. RADCOLUBE® CLP Gun Oil 3IN1 is also the preferred firearm cleaner and lubricant of The Tactical Games™ (TTG) , Multi-Gun Competitors, Extreme Long Range Shooting Organization™ (ELRSO) and King of 2 Mile™ (KO2M) shooting organizations.

RADCOLUBE® CLP keeps small & large caliber weapons in optimum condition and can be used in harsh environments, including cold, salt & dust. It maintains maximum firing performance maintaining any weapon’s maximum firing rate without incident.

Being a Military-Grade CLP gun cleaner and lubricant, RADCOLUBE® CLP  addresses all aspects of the cleaning process, simplifies firearm maintenance, adheres to MIL-PRF-63460F specifications and meets the qualifications of DOD.

RADCOLUBE® CLP has a maximum recommended shelf life of 6 years from date of manufacture.

For additional information please consult the supplied documentation.

The SWAGELOK® Company is a global supplier of a range of products including fittings, valves, hoses, regulators, medium- and high-pressure products, process instrumentation, quick-connects, measurement devices, tubing and tools, filters, sample cylinders, MPC modular systems, pre-engineered subsystems (PrESS), welding systems, leak detectors, lubricants, and sealants.

SWAGELOK® Goop™ thread lubricants reduce installation time by easing the assembly of leak-tight thread connections for a variety of metals and alloys. Oil-based BLUE Goop® thread lubricants can be used on stainless steel, steel, titanium, aluminum, and nickel based alloys for temperatures up to 400° F (204° C). Halcocarbon based PURE Goop® can be used on titanium, stainless steel, steel, and nickel based alloys for temperatures up to 350° F (176° C) while Oil-based SILVER Goop® thread lubricants can be used on stainless steel, and high temperature alloys for temperatures up to 1500° F (815° C). Offered in different packaging options: 1 oz. (29.5 cm3) tubes (PURE/SILVER Goop®), 2 oz. (59 cm3) tubes (BLUE Goop®) and 1 lb. (450 g) cans (BLUE/PURE/SILVER Goop®). According to the selected product, they resist or prevent galling. 

SWAGELOK® Snoop® liquid leak detectors detect gas leaks in hard-to reach areas. They are non-corrosive and non-flammable. Contain corrosion inhibitor for added protection. SWAGELOK® Snoop® liquid leak detectors can be used over a temperature range of 27° to 200° F (-2° to 93° C). For lower temperatures, –65°F (–54°C) SWAGELOK® Real Cool Snoop® liquid leak detectors can be used. Offered in different containers: 2 fl oz./59 ml (Snoop®), 8 fl oz./236 ml (Snoop®/Real Cool Snoop®) and 1 gal/3.8 l (Snoop®/Real Cool Snoop®).

SWAGELOK® also offers SWAK™, PTFE Tape, and PTFE-Free pipe thread sealants. For more information on SWAGELOK® products please refer to the supplied documentation. 

ARPOL AEROSPACE manufactures high-performing lubricants, oils, greases, and solvents for the aerospace industry, both military and commercial, but also for uses in land and marine applications. Their products adhere to stringent requirements and specifications designed to keep aircraft well-maintained. Packaged in accordance with unique military requirements, they include national stock numbers (NSNs), and appear on the U.S. Qualified Products List (QPL). ARPOL AEROSPACE products conform to a number of OEM, MIL, SAE, DEF STAN, and NATO code. Available in different packaging options (1 USQT, 1 USG/5USG Cans & 55 UEG Drums). For additional information on specific ARPOL AEROSPACE products please consult the Product Description section and the supplied documentation.

ZOK are powerful water-based gas turbine compressor cleaners and corrosion inhibitors produced by SOLIDUS INDUSTRIES. ZOK products are also offered with pH neutral and an effective corrosion inhibitor (ZOK 27) and with a higher pH without the added corrosion inhibitor (ZOK MX) for more challenging cleaning requirements. Originally developed for the UK Ministry of Defence over 40 years ago, ZOK 27 is used all over the world today within the Aviation, Marine, Power Generation, Oil and Gas and Industrial sectors. Regular on-line and off-line washing with ZOK 27 produces outstanding results in gas turbine engine performance: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – ultimately maximising the ROI on gas turbines.

ZOK 27 products are offered in two standards (ZOK 27 and ZOK 27 GOLD. The latter includes neutral, biodegradable, water-based gas turbine compressor and gas path cleaners specially formulated with plant based surfactants to meet ecological sustainability.

SOLIDUS INDUSTRIES ZOK 27 Gold Standard have been designed to meet the requirements of the OSPAR Convention for reduced environmental impact in sensitive marine environments, such as the North Sea. This scheme is administered by Cefas in the UK. They consist the perfect solution for maintaining peak performance of gas turbine compressors operating in ecologically sensitive environments. Regular on-line and off-line washing with ZOK 27 Gold Standard produces outstanding results: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – all this while minimising  environmental footprint.

ZOK 27 and ZOK 27 Gold Standard  are available as CONENTRATED (CNCTR) and READY TO USE (RTU) product versions in different packing options, 12.5 liters (3.3 USG) cans, 25 liters (6.6 USG) cans, 210 liters (55 USG) drums and 1000 liters (264 USG) IBC containers.

ZOK 27 READY TO USE (RTU) versions are intended for users who do not have access to demineralised water. CONENTRATED (CNCTR) vesrions can be diluted 1 to 4 with water before use (20% solution). Demineralised water (<11μS/cm conductivity) should be used for hot/on-line cleaning. Good quality drinking water (<500μS/cm conductivity) may be used for cold/off-line cleaning.

Please also refer to the attached documentation for additional information on these products.