List of products by brand NYCO S.A. (NYCO)

NYCO GROUP develops and manufactures high-performance aviation lubricants with international approvals and synthetic ester bases for Aeronautics, Defence, Industry and Automotive industries. NYCO product portfolio includes  a full range of:

Synthetic ester-base stocks sold to the lubricant producers;

High performance finished lubricants for severe to very severe applications;

Environmentally acceptable lubricants formulated on high-quality bio-based synthetic esters.

NYCO products cover a comprehensive range of application requirements for Armed Forces (Air, Sea, Land), Oil & Gas, Power Generation, MROs, OEMs, Airlines and Aircraft Manufacturers.

Active filters

NYCO TURBONYCOIL® Turbine &...

The TURBONYCOIL® product range of high-performance mineral and synthetic oils produced by NYCO are used in aircraft turbine (turbo-jet, turbo-prop, etc.) and piston engines, power units, turbo-reactors, APUs, starters, IDGs for aircraft, helicopters, naval vessels (aircraft carriers, frigates, etc.) and land equipment. Also used for aero-derivative turbines for land and sea applications (cogeneration, offshore power generation, gas compression). NYCO TURBONYCOIL® turbine oils are fortified with carefully selected anti-oxidant, anti-corrosion, anti-wear and extreme-pressure additives. TURBONYCOIL® oils are used in aircraft of many air forces (Mirage, Rafale, Eurofighter, F-16, F-22 and F-35) as well as on aircraft from Russian & Ukrainian manufacturers. 

Commonly used NYCO TURBONYCOIL®  products include:

TURBONYCOIL® 98: Synthetic turbine engine oil used on Russian-made aircraft

TURBONYCOIL® 160: Ester-based oil, specially designed to withstand high temperatures and remain fluid at very low temperatures

TURBONYCOIL® 321: 8 cSt mineral turbine engine oil for Russian-made aircraft

TURBONYCOIL® 3516: Mineral turbine oil designed for protection

TURBONYCOIL® 3560/3570: Single grade mineral oils for piston engines

TURBONYCOIL® 600: STD/SPC 5 cSt synthetic oil for turbojet engines

TURBONYCOIL® 601: 5 cSt corrosion inhibited synthetic turbine oil

TURBONYCOIL® 640: 5 cSt high thermal stability turbine oil

Many TURBONYCOIL®  products or their analogs by other producers are included in our offered product range and can be furnished on demand through our current network of co-operating suppliers. 

Please refer to the Product Description section, the supplied documentation or contact us for additional information and assistance.

NYCO HYDRAUNYCOIL® Mineral...

NYCO HYDRAUNYCOIL® range of products includes mineral and synthetic fluids for hydraulic systems and circuits subjected to high and low temperatures, resistant to fire, extreme pressure and corrosion, and biodegradable. NYCO HYDRAUNYCOIL® fluids are shock-strut fluids. The main hydraulic fluids used in civil aviation are phosphate ester based fluids produced by Exxon-Mobil and Eastman Skydrol.

Different NYCO HYDRAUNYCOIL® hydraulic fluids are available addressing the requirements of specific sectors/applications:

FH & EL series for the Automotive & Industrial sectors,

FH 14 recoil and hydraulic system fluid

FH 19 recoil and hydraulic system fluid for Navy vessels

FH 51 hydraulic fluid used on all types of aircraft

FH 5 AW / 6 AW fluids dedicated to Boeing aircraft in operation, after overhaul and under storage. Also available for Airbus aircraft.

FH 42 synthetic shock strut fluid for new generation aircraft

FH 2 helicopter and fighter jet system fluid

Applications

Aeronautical: damping fluid for landing gears (initial assembly at the main OEMs), fluids for helicopters and combat aircraft, actuators, THS (Tail Horizontal Stabilizer), test bench, etc.

Military: mobile equipment, artillery, gun-mounts, tanks, missile hydraulics, etc.

Automotive: biodegradable hydraulics for public works, lifting and marine equipment, etc.

Industrial: dams, drill bits, etc.

For more information on NYCO HYDRAUNYCOIL® fluids please refer to the supplied documentation.

NYCO and ANDEROL® ROYCO® oils, greases, fluids and specialty products are used in aircraft of Russian and Ukrainian manufacturers meeting the corresponding specifications. Most of their products are included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

NYCO GREASE®...

The NYCO GREASE® range of greases includes multi-purpose or special-purpose mineral and synthetic greases for extreme applications (low and high temperatures, high speed and pressure, saline, corrosive, humid environments, etc.), compliant with civil, military aviation and industrial constraints. They are intended for use in a variety of applications such as airframe, slats, flaps, heavy loads, THS (Tail Horizontal Stabilizer), actuators, bearings, doors, landing gears, wheels, jacks, rudders, LRU (Line Replaceable Units) and also as an anti-seize or assembly compound, protection grease, etc.  NYCO GREASE® NLGI 2 grade greases commonly used in Aerospace and Defense applications with respective specifications & approvals, are outlined below. 

NYCO GREASE® GN 06 mineral grease thickened with a lithium soap for use in low speed and sliding motion parts and as an airframe multipurpose grease (doors, slaps, flaps, landing gear, etc.

NYCO GREASE® GN 10 and GN 22 general purpose airframe greases

NYCO GREASE® GN 15 general purpose aircraft lithium grease

NYCO GREASE® GN 43 an aircraft synthetic grease for instruments and ejection seats

NYCO GREASE® GN 44 a synthetic aircraft grease for weapons

NYCO GREASE® GN 45 a blend of silicone and graphite, ideal for lubrication of roller bearings, transmissions in propellers, threading, etc.

NYCO GREASE® GN 148 a multi-purpose airframe and landing gear grease containing excellent anti-corrosion additives

NYCO GREASE® GN 155 a heavy duty naval, sea-water resistant grease for use in lubrication of bearings, ropes, pins and joints exposed to sea-water wash-out, dust, temperature and heavy loads – including components fully immersed in sea-water

NYCO GREASE® GN 25013 a multipurpose extreme temperature airframe grease, based on silicone oil, thickened with polytetrafluoroethylene and reinforced with anti-corrosion and antioxidant additives

NYCO GREASE® GN 3058, based on lithium complex, intended for use in wheel bearings, propeller bearings and highly loaded landing gear areas

NYCO also offers 65 Vaseline, a stiff, rather tacky petrolatum (heavy mineral paraffin wax), with a melting point in the range 45 to 60°C. It is not aggressive to any metal or alloy and can be used for anti-seize protection, assembly and dismantling of aircraft and helicopter parts and seals, temporary rust prevention in workshop and battery terminals protection. Approvals/Qualifications: AIR 3565/A, VV-P-236, CML 03FAB1, ATR CML 04-012, CFMI CP 5070, Snecma DMR 75-103, Boeing CML D00504, Airbus Helicopters CM119.

NYCO and ANDEROL® ROYCO® oils, greases, fluids and specialty products are used in aircraft of Russian manufacturers meeting the corresponding specifications. Most of their products are included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products.

NYCO NYCOLUBE® Mineral &...

NYCO NYCOLUBE® family of high performance mineral and synthetic lubricants are used for different aeronautical, defence and industrial applications such as engines, helicopter gear boxes, power-drive units for aircraft engines, on-board aeronautical instruments, equipment anti-seize and assembly, LRU (Line Replaceable Units), CLP (Cleaners, Lubricants and Preservatives) for the maintenance of weapons, gear boxes, power reduction gearboxes, air compressors or high-temperature chain oils.

NYCOLUBE® 30 is a petroleum lubricating oil with a minimum viscosity of 11 cSt at 40°C. It is inhibited against corrosion and has water-displacing properties. Can be used as a general purpose preservative oil for military equipment, primarily to protect weapons of all calibers from rust during storage.

Different NYCOLUBE® series of products for the automotive and industrial sectors include:

NYCOLUBE® 200 series high performance 2-stroke engine oils

NYCOLUBE® 5500 series high flash point high temperature oven chain oils

NYCOLUBE® 5600 HT series very high-temperature oven chain oils

NYCOLUBE® 3000 series high performance compressor oils

Respective NYCOLUBE® solutions for the Defense sector include:

NYCOLUBE® 127 CLP product range

NYCOLUBE® 294 heavy duty multigrade 0W30 engine oil

For additional information please refer to the Product Description section and the supplied documentation.