Copper wires are conductors of electricity and they are used for a wide range of applications including power generation, power transmission, power distribution, telecommunications, electronics circuitry and others. Apart from the high conductivity copper features durability, tensile strength and corrosion resistance.

AVIATIONEU NEW ERA copper round wire product range includes bare copper, copper, paper insulated copper wires as well as double cotton covered and silver or tinned plated copper wires. 

They are offered in rolls in different wire gauges (*). Sold in kilograms except the double cotton covered wire which is sold by the meter. Appearing prices is for reference only per UOM. Please contact us for a quotation.

Bare Copper Wire, Gauge 0-5

Paper Insulated Stranded Wire, Gauge 0-5

Tinned Plated Copper Wire (Temperature 120 deg. C), Gauge 0.2-2

Silver Plated Copper Wire (Voltage up to 1000 V, Flame Retardant), Gauge 0-5

Double Cotton Covered Copper Wire, Gauge 0-5

(*) Wire gauge is a measurement of wire diameter. This determines the amount of electric current a wire can safely carry, as well as its electrical resistance and weight. Please refer to the respective table.

AVIATIONEU NEW ERA wire rope slings complements our range of wire cables/ropes providing mechanically spliced, hand spliced or socket robustly manufactured slings made from high grade 1770/1960 raw material. Hand and mechanically spliced slings are offered in different eye/loop types (soft,hard,plain thimble,solid thimble) in different diameters up to 60 mm. The hand spliced slings are of different contruction types (6X19,7X19,6X7) and feature sturdiness, strong construction, long service life and dimensional accuracy. They are offered as galvanized, UN galvanized, and stainless steel and can be used with different fittings (ring, hook, D shackle, turnbuckle). The mechanically spliced  galvanized steel and stainless steel slings are aasy to use, of different contruction types (6X7,7X7,6X19,7X19,6X37,7X37,6X36,7X36) and feature corrosion resistance, high strength and long service life.  The slings with socket from stainless steel are offered in  diameters 5-10 mm in plain eye, hard loop and plain thimble eye/loop types. Sold by the piece with Minimum Order Quantity (MOQ) 100 pieces.  Appearing price is for reference only per piece. Please contact us for a quotation.

AVIATIONEU NEW ERA air relief valves can be used in different industrial applications. They are made from different materials,  EN 1AL (free cutting steel), 1SMnPb30+C or SAE 12L13  and zinc plated. Available in the following sizes:

Metric: M10 x 1 ARV

British Standard Pipe (BSP): 1/8" BSP ARV

U.S. National Pipe Thread (NPT): 1/8" NPT ARV, 1/4" NPT ARV

Sold by the piece (pc.) with Minimum Order Quantity (MOQ) 1000 pcs.  Appearing price is for reference only per pc. Please contact us for a quotation.

A wide range of grease fittings (aka zerk fittings or grease nipples) are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. Sourced from quality manufacturers, they are competitively priced and can be furnished in different head types  (conical, button or flush head, drive-in or self-forming), straight or angled heads (30°, 45°, 65°, 67.5°, 90°) and thread sizes in metric or inch systems, depending on the selected fitting. Fittings are sold in pieces but mostly in packs a with specified number of fittings indicated after the letters "PK" in the product reference number (SKU). Fitting kits are also available with assortments of different fittings.

Our AVIATIONEU NEW ERA conical head grease nipples comply with DIN 71412, SAE J534 & IS 4009-2 standards. Hardness for nipple head: Min.550 HV. They are made from different materials,  EN 1AL(free cutting steel), 1SMnPb30+C,SAE 12L13 or stainless steel  303 & 316 with different surface finishes (clear/yellow/olive green zinc plated). Available with straight or angled nipples, tapered or parallel threads in different sizes:

Metric: from M5x0.8 to M16x1.5

British Standard Pipe (BSP): from 1/8"-28 to 3/8"-19

U.S. National Pipe Thread (NPT/PTF): from 1/8"-27 to 1/4"-18

U.S. ANSI/ASME B1.1 Unified National Thread - UNC Coarse series and UNF Fine series: from 1/4"-28 to 3/8"-24

Our AVIATIONEU NEW ERA button type round head grease fittings comply with DIN 3404 & IS 4009-1 standards.They are made from different materials,  EN 1AL(free cutting steel), 1SMnPb30+C,SAE 12L13 or stainless steel  303 & 316 with a galvanized surface treatment and different surface finishes (yellow/white zinc plated). Available with parallel threads in different head diameters (10, 16 & 22 mm head dia. )and sizes:

Metric: from M6x1 to M16x1.5

British Standard Pipe (BSP): 1/8", 1/4" & 3/8"

U.S. National Pipe Thread (NPT/PTF): 1/4" 

Our AVIATIONEU NEW ERA flush head grease fittings comply with  DIN 3405 standard.They are made from different materials,  EN 1AL(free cutting steel), 1SMnPb30+C or SAE 12L13 and  zinc plated. Available with parallel threads in different sizes:

Metric: from M5x0.8 to M12x1.5

British Standard Pipe (BSP): 1/8", 1/4" & 3/8"

U.S. ANSI/ASME B1.1 Unified National Thread - UNC Coarse series and UNF Fine series: 1/4"-28

For additional information please contact us.

AVIATIONEU NEW ERA end hose banjo fittings are intended for use in hydraulic pipes in automotive fuel, oil and hydraulic systems. They are available with single or double ends from different materials, mild steel, EN 1AL(free cutting steel), 11SMnPb30, EN 8, stainless steel 202 & 304. Sourced by certified manufacturers these banjo fittings are competitively priced and offered in different Metric sizes (M10x5/16", M12x5/16", M14x5/16", M14x3/8", M16x3/8", M18x3/8", M18x1/2") and different surface treatments (clear /yellow zinc plated, olive green zinc plated, dacromet). Sold by the piece (pc.) with Minimum Order Quantity (MOQ) 500 pcs.  Appearing price is for reference only per pc. Please contact us for a quotation.

AVIATIONEU NEW ERA plain banjo fittings are intended for use in hydraulic pipes in automotive fuel, oil and hydraulic systems. They are available from different materials, mild steel, EN 1AL(free cutting steel), 11SMnPb30, EN 8, stainless steel 202 & 304. Sourced by certified manufacturers these banjo fittings are competitively priced and offered in different Metric sizes (M10x5/16", M12x5/16", M14x5/16", M14x3/8", M16x3/8", M18x3/8", M18x1/2") and different surface treatments (clear /yellow zinc plated, olive green zinc plated, dacromet). Sold by the piece (pc.) with Minimum Order Quantity (MOQ) 1000 pcs.  Appearing price is for reference only per pc. Please contact us for a quotation.

These AVIATIONEU NEW ERA hexagon locking nuts comform with ASTM A194 standard specification for carbon, alloy and stainless steel nuts used in high pressure, temperature or other special-purpose applications. They can be indicatively used in the process industries, such as petroleum and chemicals for pressure vessels, valves, flanges, and fittings. Sourced by certified manufacturers these nuts are competitively priced and offered in metric (M3 - M36 diameter) or inch (3/16" - 1.1/2") sizes, different thread types and grade range to meet respective design, service conditions, mechanical properties, and high temperature requirements. Please refer to ASTM A194  specification table for additional information. Sold in packs of 100 pcs each.  Appearing price is for reference only per pack. Please contact us for a quotation.

AVIATIONEU NEW ERA ASTM A324 Grade 10.9 Series high tensile hexagonal head threaded bolts are produced from medium carbon steel, medium carbon steel alloy and low carbon boron steel with heat treatment by both quenching and tempering.  They meet ASTM A324 Grade BD and SAE J429 standards. These bolds feature high tensile strength and good wear resistance and are used in automotive applications and for bolting large and forged parts. 

Nominal Tensile Strength: 1.000 Megapascal (MPa) or 1.000 N/sqr. mm , Yield Stress: 900 Megapascal (MPa) or 900 N/sqr. mm 

They are offered in different finishes (zinc plated, plain or hot dip galvanised) and different standard, coarse and fine thread sizes (diameter M20 to M100 mm / 3/4" to 3.1/2").  Sold by the piece (pc.) in increments of 10 pieces with Minimum Order Quantity (MOQ) 100 pieces. Appearing price is for reference only and differentiates based on wanted bolt sizes. Please contact us for a quotation.

AVIATIONEU NEW ERA ASTM A324 Grade 8.8 Series high tensile hexagonal head threaded bolts are produced from medium carbon steel with heat treatment by both quenching and tempering.  They comply with ASTM A324, ASME SA324 standards. Medium carbon steel is less expensive  than other grades and features good ductile and malleable qualities but a lower tensile strength. 

Grade 8 Class bolt capabilities: Yield (strech): 4354 lbs min, Tension (failure): 5024 lbs min, Tensile Strength: 150.000 lbs per square inch.

These bolts are offered in different finishes (zinc plated, plain or hot dip galvanised) and different sizes (diameter M20 to M100 mm / 3/4" to 3.1/2").  Sold by the piece (pc.) in increments of 10 pieces with Minimum Order Quantity (MOQ) 100 pieces. Appearing price is for reference only and differentiates based on wanted bolt sizes. Please contact us for a quotation.

Like other fasteners in ASTM A193 Grade B6 series, AVIATIONEU NEW ERA ASTM A193 Grade B6 stainless steel flat washers are characterized by their high tensile strength, excellent resistance to corrosion, durability as well as a long functional work life. They can be used in different applications in industries that demand high tensile strength and corrosion resistance. Sourced by certified manufacturers they are competively priced and offered in different sizes. Sold by the piece (pc.) in increments of 10 pieces with Minimum Order Quantity (MOQ) 100 pieces. Appearing price is for reference only and differentiates based on wanted washer sizes. Please contact us for a quotation.

AVIATIONEU NEW ERA ASTM A193 Grade B6 Series stainless steel stud bolts are manufactured from the ferritic grade AISI 410 stainless steel and can be heat-treated and machined to minimum of 110-ksi or 760 Mpa tensile strength. Like other fasteners in this seies, apart from their high tensile strength, they exhibit excellent resistance to corrosion, durability as well as a long functional work life. They can be used in different applications in industries that demand high tensile strength and corrosion resistance. Sourced by certified manufacturers they are competively priced and offered in different diameters and lengths. Sold by the piece (pc.) in increments of 10 pieces with Minimum Order Quantity (MOQ) 100 pieces. Appearing price is for reference only and differentiates based on wanted bolt sizes. Please contact us for a quotation.

AVIATIONEU NEW ERA high tensile stainless steel threaded bolts are manufactured from AISI 410 stainless steel and heat-treated and machined to minimum of 110-ksi or 760 Mpa tensile strength. They are dual ASTM & ASME certified (ASTM A193 B6: Class 1 Stainless Steel, ASME B1.1 2A/3A Inch Unified Threads and B1.13M 6h Metric Coarse Threads). In addition to their high tensile strength, they exhibit excellent resistance to corrosion, good dimensional stability, durability as well as a long functional work life. They can be used in different industries demanding high tensile strength and corrosion resistance like marine, chemical & petrochemical etc. Sold in in packs (pk) of 25 bolts/pk in different head, body diameters and thread lengths in inches with Minimum Order Quantity (MOQ) 10 packs. Please refer to the attached specifications table. Appearing price is for reference only and differentiates based on wanted bolt sizes. Please contact us for a quotation.

A wide range of Stainless Steel Hexagonal Nuts are offered as part of our own label (AVIATIONEU NEW ERA) product lines to meet diverse applications in aerospace and other industrial sectors. An overview of this product family structured in series is included below wihile additional information are included in the Product Description section. Sourced from quality manufacturers these nuts are available in different stainless steel materials, Metric or inch sizes, threads types and classes and comply with different standards/specifications depending on the selected product. Depending on selected nut size they are sold in pieces or convenient pacls of specified number of nuts per pack indicated after the letters "PK" in the product reference number (SKU). For further information please consult the supplied documentation or contact us.

AVIATIONEU NEW ERA AISI 304 Stainless Steel Nylon Insert Hex Lock (Elastic Stop) Nuts - Inch System. Retain locking ability up to 250 °F (121 °C).

AVIATIONEU NEW ERA AISI 304/316/667 Stainless Steel Hexagonal Lock Nuts - Metric System

AISI 304, 316 or 667 Stainless Steel. Meet DIN 985 standard. They feature a coarse thread type, bright finish and a strength class of  A2-70.

AVIATIONEU NEW ERA AISI 304 Stainless Steel Hexagonal (Non Lock) Nuts - Metric System

AISI 304 Stainless Steel. Meet DIN 439 standard. They feature a coarse thread type, bright finish and a strength class of  A2-70.

AVIATIONEU NEW ERA  AISI 410 Stainless Steel Hexagonal (Non Lock) Nuts - Metric System

ASTM A193 Grade B6 Stainless Steel Hexagonal Nuts combining high tensile strength, excellent resistance to corrosion, durability and long service life. Used in different high tensile strength and corrosion resistance applications.

AVIATIONEU NEW ERA AISI 304 Stainless Steel Nylon Insert Hex Jam Lock Nuts - Inch System

 Low profile lock nuts fromAISI 304 Stainless Steel. Suitable for corrosion resistance in applications exposed to fresh water.

AVIATIONEU NEW ERA 18-8 Stainless Steel Hex Jam Nuts - Inch System, UNEF Thread Type

Exhibit good chemical resistance and may be mildly magnetic. Used in low-clearance applications. Offered as RH or LH Threaded (UNEF Thread Type).

AVIATIONEU NEW ERA 18-8 / AISI 316 Stainless Steel Hex Panel Nuts - Inch System, UNEF Thread Type

Extremely thin nuts for tight spaces such as electrical panels. Can be furnished in 18-8 or AISI 316 Stainless Steel in different finishes. Those with a black-oxide finish have a dark surface color.

A nylon-insert lock nut (also referred to as elastic stop nut, nut with a non-metallic insert  or nyloc nut) is a type of locknut with a nylon collar that increases friction on the screw thread. Nyloc nuts are widely used in products and structures subject to dynamic loads where motion or vibration can cause fasteners to become loose. Their design prevents the connection from loosening without the need for additional lock washers.The nylon insert is situated at the top of the nut and when tightened locks against the thread. The insert deforms elastically over the threads as tightening pressure is applied. The insert locks the nut against the screw as a result of friction, caused by the radial compressive force resulting from the deformation of the nylon. Nyloc nuts retain their locking ability up to 250 °F.

Metric hexagonal nylon-insert self-locking nuts are high anti vibration and anti loose fastening parts conforming to DIN 982 and DIN 985 standards. Different metric thread sizes are designated by the letter "M" indicating the nut's clearance diameter in mm. The main difference between DIN 982 & DIN 985 is the height of the nuts for same thread diameter. DIN 982 lock nuts (often termed as “P” Type) are taller than DIN 985 (aka “T” Type) ones. Lower profile  DIN 985 are used in places where height is limited, while standard height DIN 982 nuts are used in connections where increased strength and fixation are required. In addition, the size range of DIN 985 nuts is wider than that of DIN 982. DIN 985 Nylon self-locking nuts can be used in various mechanical and electrical products with temperature from – 50 ℃ to 100 ℃. Due to their significantly higher anti vibration and anti loose performance than other anti loose devices, their application ranges from  tanks, mining, agricultural, textile &  various kinds of machinery to automobiles and aerospace.

Both DIN 982 and DIN 985 lock nuts are offered as part of our own (AVIATIONEU NEW ERA) product lines. Sourced from quality manufacturers they are competitively priced and can be supplied in different materials (Steel, Brass, Carbon Steel, Alloy Steel & Stainless Steel), grades (Class 5, 6, 8 or 10), metric thread diameters (typically M3/3 mm to M30/30 mm or up to 48 mm for DIN 985 nuts), thread pitches and finishes (natural, electro zinc-plated, chrome plated, black oxide and others). Sold in pieces or packs with number of pieces per pack indicated after "PK" designation in product SKU.

Notes:

Nut thread pitch indicates the distance between threads measured along the length of the nut expressed in mm.

In the case of stainless steel lock nuts, the stainless steel grades are denoted with codes such as A2 or A4 and dash numbers indicating the minimum tensile strength to be met by the material. For example, A2-70 relates to a nylon-insert lock nut made from 304 stainless steel with a minimum tensile strength of 700N/mm² (MPa).

AVIATIONEU NEW ERA Stainless Steel Plain Washers are made of Stainless Steel 304 or 316 (depending on P/N) with a bright surface treatment. They are produced in accordance with DIN 9021 standard. Sourced from certified manufacturers these washers are offered in competitive prices and they are available in different sizes on the basis of their Clearance (Hole) Diameter/Outer Diameter/Thickness in mm. Sold in packs of 250 or 25 pieces depending on the size of the washers. The number of pieces included in each pack is mentioned after "PK" designation.

AVIATIONEU NEW ERA Stainless Steel Plain Washers are made of Stainless Steel 304 or 316 (depending on P/N) with a bright surface treatment. They are produced in accordance with DIN 125 (ISO 7089) standard. Sourced from certified manufacturers these washers are offered in competitive prices and they are available in different sizes on the basis of their Clearance (Hole) Diameter/Outer Diameter/Thickness in mm.Sold in packs of 500, 50 or 25 pieces depending on the size of the washers. The number of pieces included in each pack is mentioned after "PK" designation.

AVIATIONEU NEW ERA Chrome Moly 4130 grade steel seamless round tubes are sourced from certified manufacturers, they are competitively priced and can be used in aerospace and industrial applications. They are offered in different wall thicknesses (2-200 mm), outer diameters (25-450 mm) and lengths, 10 mm (0.01 m) - 9000 mm (9 m). Depending on selected prroduct they comply with different AMS, ASTM or MIL specifications. Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 1 US Ton. They can be sea or sea/surface transported to the customer destination. Approximate time for shipping: 2 months from the time of ordering and payment receipt. Appearing price is indicative per unit of sale. Please contact us for quotation.

AVIATIONEU NEW ERA Brass plain washers are made of copper, nickel alloy with a natural color finish in accordance with DIN9021 standard. Sourced from certified manufacturers these washers are offered in competitive prices and they are available in different sizes on the basis of their Clearance (Hole) Diameter/Outer Diameter/Thickness in mm. Sold in packs of 250 or 50 pieces depending on the selected product. The number of pieces included in each pack is mentioned after "PK" designation.

AVIATIONEU NEW ERA Brass plain washers are made of copper, nickel alloy with a natural color finish in accordance with DIN 433 standard. Sourced from certified manufacturers these washers are offered in competitive prices and they are available in different sizes on the basis of their Clearance (Hole) Diameter/Outer Diameter/Thickness in mm. Sold in packs of 250 or 50 pieces depending on the selected product. The number of pieces included in each pack is mentioned after "PK" designation.

AVIATIONEU NEW ERA Brass plain washers are made of copper, nickel alloy with a natural color finish in accordance with DIN 125 standard. Sourced from certified manufacturers these washers are offered in competitive prices and they are available in different sizes on the basis of their Clearance (Hole) Diameter/Outer Diameter/Thickness in mm. Sold in packs of 250 or 50 pieces depending on the selected product. The number of pieces included in each pack is mentioned after "PK" designation.

2000 series aluminum alloys, with copper as the primary alloying element, are a set of "hard alloys". They typically contain between 2 to 10% copper, with smaller additions of other elements. The copper provides substantial increases in strength and facilitates precipitation hardening but can also reduce ductility and corrosion resistance. These alloys are known for high performance and excellent strength over a broad range of temperatures   but can be the most challenging to weld. They find use in many industries, including the aerospace sector. They are essential materials in various industries such as aerospace, marine, construction, and automobile. 

Extruded round tubes from 2011, 2014, 2017 and 2024 aluminum alloys in T351 & T651 tempers are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality producers, they conform with ASTM specifications. Competively priced these tubes are available in different diameters 1-360 mm, wall thicknesses and cut to order (CTO) lengths max 6 m. Also available in other shapes (square, rectangular, hexagonal tubes and ultra-thin tubes). Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale. For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us.

Aluminum alloys 6061 and 6063 (AL6061/AL6063), with magnesium and silicon as their major alloying elements, are both popular alloys used in extrusions for a variety of architectural, machinery, equipment, and consumer products. Similar in composition & mechanical properties they come as O (annealed), or in tempered grades. Their magnesium content provides increased strength, and silicon reduces their melting temperature. Their formability, weldability, corrosion resistance, and moderately high strength enhance their versatility. However, there are differences between them and factors affecting their suitability for different applications. 6061 aluminum is the most commonly used aluminum alloy in the world used in all kinds of applications ranging from electronics to welded assemblies. Compared to AL2024 (aka aircraft aluminum) 2024 aluminum’s higher yield strength makes it more suitable if strength is a priority. 6061 tubes, sheets, bars, and plates offer high- to moderate strength, excellent corrosion resistance, and superior machinability and weldability while 6063 aluminum tubes offer an excellent strength-to-weight ratio, superior corrosion resistance, and a fine appearance and finish.

AVIATIONEU NEW ERA seamless extruded round pipes from 6061/6063 aluminum alloy are competitively priced, produced as per ASTM B241 specification (also available in ASTM B209-04, B210M-05, B234M-04 & B221M-05a) and offered as T6 tempered. Available in outer diameters 12.7-1066.8 mm, wall thicknesses 1.5-150 mm and cut to order (CTO) lengths. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale. For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us.

Stainless Steel alloy 13-8 PH (UNS S13800) is a martensitic precipitation-hardening stainless steel alloy featuring excellent strength, high hardness, superior toughness, and good corrosion resistance. Good transverse toughness properties are achieved by tight chemical composition control, low carbon content,and vacuum melting.

The chemical composition includes Chromium (Cr) 12.25-13.25%, Nickel (Ni) 7.5-8.5%, Molybdenum (Mo) 2.0-2.5%, Aluminum (Al) 0.90-1.35% as content weight with other metals covering the balance. This alloy is double melted in a Vacuum Induction Furnace followed by Consumable Electrode Vacuum Melt (VIM-VAR). In some cases, a second melting  by Electroslag Remelting (ESR) is implemented. It is weldable (inert gas shielding with Helium is preferred). Corrosion resistance is similar to 304 Stainless, with greatest resistance in the fully hardened conditions. Stainless Steel 13-8 PH comes in different shapes mostly in bars/rods, wires, forgings, rings and extrusions but also in sheets or plates.

Stainless steel 13-8 Mo is used in a range of applications including pins, valves, shafts, screws and bolts, missile components, fittings and fasteners, injection molding equipment, nuclear and petrochemical industry equipment as well as aircraft components such as engine, landing gear and structural sections.

Stainless Steel 13-8 PH grade round bars/rods are offered as part of AVIATIONEU NEW ERA product lines. Sourced by quality producers, these bars/rods are offered in Condition A (Annealed) and in different diameters in inches and pre cut lengths in inches or feet. They meet different specifications such as AMS -5629 or ASTM -A564. For additional information, please refer to the supplied documentation or contact us.

AISI/SAE(*) 4130 and 4140 grade steels are low-alloy steels containing chromium and molybdenum as common composition elements. Both are are popular steel materials due to their properties. AISI 4130 grade steel shows good overall combinations of strength, toughness and fatigue strength with good atmospheric corrosion resistance while AISI 4140 grade steel features a high fatigue strength, abrasion and impact resistance, toughness, and torsional strength. Both alloys are weldable with the use of all conventional techniques (AISI 4130 alloy's lower carbon composition compared to AISI 4140 allows easier welding) and machinable in the annealed condition. To make them stronger they need to be subjected to heat treatment, such as annealing, cold working, etc. 4140 and 4130 grade steels are wideky used in aerospace, oil and gas, automotive, agricultural and defense industries.

AISI 4130/4140 alloy steel sheets/plates are offered as part of AVIATIONEU NEW ERA product lines for a wide range of uses. Sourced from quality producers, they are cold rolled to increase their strength and produced in accordance with ASTM specificatiions. Competitively priced and offered in different thicknesses (0.2-4 mm or 4-60 mm or 60-115 mm) and cut to order widths (500-1500 mm  or 600-3000 mm) and lengths, they consist a cost effective solution when large quantities of such sheets are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destinationcan be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  

For additional information, please refer to the attached comparison table of specifications for different steel alloys or contact us for quotation.

(*) American Iron & Steel Institute (AISI), Society of Automotive Engineers (SAE)

Dyes and Pigments represent the two principal types of colorants widely used in industrial and consumer products. They impart color through different methods.  

The main difference between the two is that dyes/dyestuffs provide their color by attaching to a substrate, or by dissolving in a solvent like water, alcohol, or oil, through which the dye becomes part of the material chemical solution. Pigments provide color without any required interaction with another substance. Pigments are insoluble powders that exist as suspended particles in a binder. Other differences include their application mechanism, the typically transparent appearance of dyes versus opacity of pigments, their durability (fastness) with pigments being generally more fade-resistant and chemically stable than less resistant to fading and washing dyes, but also the field of application with solvent dyes (specifically oil-soluble) and water-soluble dyes dyes commonly used on fuels (petrol, oil), lubricants, greases, candles, plastics (PS, ABS, PC), textiles, food, leather, hair color, wood stains, or varnishes while pigments on paints (acrylic, oil), inks for inkjet printers, plastics, cosmetics, and printing. 

Solvent dyes (specifically oil-soluble) are non-ionic organic compounds dissolving in oils, hydrocarbon solvents, waxes, and fats. Widely used in fuels (petrol, oil) for regulatory purposes but also on lubricants, greases, plastics for distinguishing brands, conformance to precise specifications set by OEMs, etc.They are resistant to water and ideal for non-polar, transparent, or oily substrates. Water-soluble dyes dissolve in water and alcohols providing intense, deep colors to hydrophilic materials, and are commonly encountered in  textiles, paper, hair coloring, cosmetics, and food coloring.

Sourced from quality producers, liquid and powder solvent dyes are now offered as part of AVIATIONEU NEW ERA product lines in different packaging options. Our oil and water soluble dyes are intended for use as cost effective solutions for numerous applications instead of competitive brands. In general, liquid dyes are supplied ready to use  (without prior pre-dissolving need) and consist a preferred choice for quick, even coloring whereas our powder dyes are often selected for their higher concentration, longer shelf life for storage, dry mixing or transport convenience (non-hazmat regulated).

For additional information please refer to the supplied documentation or contact us.

AVIATIONEU NEW ERA extruded rectangular bars from 7075 aluminum alloy are competitively priced, sourced from certified manufacturers, produced as per ASTM specification and  offered as Fabriacted (F) or H112 tempered. Used in aviation and industrial applications. They are available in dimensions 3.0 mm (1/8') -100 mm (3-15/16") × 10 mm (25/64") -300 mm (11 13/16") and length up to 12000 mm (12 m). Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 1 US Ton. Sea/sea-surface transport to destination. Appr. time for shipping: 1 month from the time of order payment. Appearing price is indicative per unit of sale. Please contact us for for additional information and quotation.

Our Quick Guide for Aluminum Alloys & Tempers is now available. Please see attached file.

AVIATIONEU NEW ERA extruded square bars from 7075 aluminum alloy are competitively priced, sourced from certified manufacturers, produced as per ASTM specification and offered as Fabriacted (F) or H112 tempered. Used in aviation and industrial applications. They are available in dimensions 5 mm × 5 mm (13/64" x 13/64") up to 150 mm × 150 mm (5-29/32" x 5-29/32") and length up to 12000 mm (12 m). Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 1 US Ton. Sea/sea-surface transport to destination. Appr. time for shipping: 1 month from the time of order payment. Appearing price is indicative per unit of sale. Please contact us for for additional information and quotation.

Our Quick Guide for Aluminum Alloys & Tempers is now available. Please see attached file.

AVIATIONEU NEW ERA extruded round bars/rods from 7075 aluminum alloy are competitively priced, sourced from certified manufacturers, produced as per ASTM specification and offered as Fabriacted (F) or H112 tempered. Used in aviation and industrial applications (constructions, transportation tools, etc). They are available in outer diameters 6 mm (15/64'') -300 mm (11-13/16") and length up to 12000 mm (12 m). Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 1 US Ton. Sea/sea-surface transport to destination. Appr. time for shipping: 1 month from the time of order payment. Appearing price is indicative per unit of sale. Please contact us for for additional information and quotation.

Our Quick Guide for Aluminum Alloys & Tempers is now available. Please see attached file.

AL7050 (known as a commercial aerospace alloy) is a heat-treatable aluminium alloy with zinc as the main alloying element, combining high mechanical strength, good stress corrosion cracking resistance and toughness at subzero temperatures. Typical mechanical properties of 7050 aluminum in metric and imperial systems include a tensile strength of 515 MPa (74695 psi), a yield strength of 455 MPa (65992 psi) and a fatigue strength of 240 MPa (34809 psi). Particularly suitable for heavy plate aerospace and other commercial and military applications, such as fuselage frames, bulkheads, wing skins and aircraft structures.

Extruded bars from 7050 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered in different shapes, (round, rectangular and square), tempers (e.g. as Fabricated (F) or H112 tempered), specifications, diameters/thicknesses and cut-to-oder lengths to meet order requirements. 

7070 aluminum alloy rectangular bars are available in different dimensions 3.0 mm (1/8') -100 mm (3-15/16") × 10 mm (25/64") -300 mm (11 13/16") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film. 

AL7050 (known as a commercial aerospace alloy) is a heat-treatable aluminium alloy with zinc as the main alloying element, combining high mechanical strength, good stress corrosion cracking resistance and toughness at subzero temperatures. Typical mechanical properties of 7050 aluminum in metric and imperial systems include a tensile strength of 515 MPa (74695 psi), a yield strength of 455 MPa (65992 psi) and a fatigue strength of 240 MPa (34809 psi). Particularly suitable for heavy plate aerospace and other commercial and military applications, such as fuselage frames, bulkheads, wing skins and aircraft structures.

Extruded bars from 7050 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered in different shapes, (round, rectangular and square), tempers (e.g. as Fabricated (F) or H112 tempered), specifications, diameters/thicknesses and cut-to-oder lengths to meet order requirements. 

7070 aluminum alloy square bars are available in different dimensions 5 mm × 5 mm (13/64" x 13/64") up to 150 mm × 150 mm (5-29/32" x 5-29/32") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film. 

AL6061 is an aluminium alloy, with magnesium and silicon as the primary alloying elements. It is one of the most common alloys of aluminum for general-purpose use. Commonly available in pre-tempered grades such as 6061-O (annealed) as well as tempered grades such as 6061-T6 or 6061-T651. It can be compared with AL5052 (the highest strength alloy of the more non-heat-treatable grades) as well as with AL6063 which  is similar in composition and mechanical properties. AL6061 main features include: heat-treatable, excellent machinability, excellent corrosion resistance, semi-smooth surface, lightweight, high-tensile strength. Commonly used in transportation components, recreation products, machinery and equipment, and consumer durables.

Extruded bars/rods from 6061 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 6061 H112 Temper rectangular bars are offered in different dimensions 3.0 mm (1/8') -100 mm (3-15/16") × 10 mm (25/64") -300 mm (11 13/16") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

AL6061 is an aluminium alloy, with magnesium and silicon as the primary alloying elements. It is one of the most common alloys of aluminum for general-purpose use. Commonly available in pre-tempered grades such as 6061-O (annealed) as well as tempered grades such as 6061-T6 or 6061-T651. It can be compared with AL5052 (the highest strength alloy of the more non-heat-treatable grades) as well as with AL6063 which  is similar in composition and mechanical properties. AL6061 main features include: heat-treatable, excellent machinability, excellent corrosion resistance, semi-smooth surface, lightweight, high-tensile strength. Commonly used in transportation components, recreation products, machinery and equipment, and consumer durables.

Extruded bars/rods from 6061 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 6061 H112 Temper square bars are offered in different dimensions 5 mm × 5 mm (13/64" x 13/64") up to 150 mm × 150 mm (5-29/32" x 5-29/32") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

AL6061 is an aluminium alloy, with magnesium and silicon as the primary alloying elements. It is one of the most common alloys of aluminum for general-purpose use. Commonly available in pre-tempered grades such as 6061-O (annealed) as well as tempered grades such as 6061-T6 or 6061-T651. It can be compared with AL5052 (the highest strength alloy of the more non-heat-treatable grades) as well as with AL6063 which  is similar in composition and mechanical properties. AL6061 main features include: heat-treatable, excellent machinability, excellent corrosion resistance, semi-smooth surface, lightweight, high-tensile strength. Commonly used in transportation components, recreation products, machinery and equipment, and consumer durables.

Extruded bars/rods from 6061 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 6061 H112 Temper round bars are offered in different diameters 6 mm (15/64'') -300 mm (11-13/16") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

AVIATIONEU NEW ERA round tubes from 5052 aluminum alloy are competitively priced, sourced from certified manufacturers, produced as per ASTM B210M specification and offered as Annealed (O-temper) or H112 tempered. Used in aviation and industrial applications (constructions, furniture, signs, etc). They are mill finished and available in outer diameters 5-650 mm, wall thicknesses 1-55 mm and lengths 1-13 m. Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 1 US Ton. Sea/sea-surface transport to destination. Appr. time for shipping: 1 month from the time of order payment. Appearing price is indicative per unit of sale. Please contact us for for additional information and quotation.

Our Quick Guide for Aluminum Alloys & Tempers is now available. Please see attached file.

Grade 5052 aluminium alloy, with magnesium and chromium as the primary alloying elements is frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and other equipment, pressure vessels, containers, and other applications.  5052 aluminium alloy exhibits a good marine atmosphere corrosion resistance of saltwater and excellent workability. Main features of this alloy include: non heat-treatable, excellent weldability, high corrosion resistance, smooth surface, lightweight, high-tensile strength.

Extruded bars/rods (*) from 5052 aluminum alloy are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular, hexagonal or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and mostly offered as Fabricated (F) or H112 tempered. They are offered in Metric dimensions and cut to order lengths up to 12000 mm (12 m). AVIATIONEU NEW ERA Aluminum 5052 bars/rods consist a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Appearing price is indicative per unit of sale and can differentiate depending on the specifications of the ordered metals. 

In most cases, smaller quantities can be served by our suppliers' stocks within 10 days from order placement & payment. Availability for non stock sizes/quantities is  usually 1-2 months.

Packing includes waterproof paper, wooden boxes/pallets, steel band bundling etc. Sea/sea-surface transport to customer destination can be provided at additional cost.

Dimesion (size) ranges of offered AVIATIONEU NEW ERA Aluminum 5052 bars/rods per cross section:

Round: diameter from 4 to 650 mm

Square: dimensions from 4X4  to 200X200 mm

Rectangular: dimensions from  3X4 to 200X300 mm

Flat: dimensions from 3X4  to 10X675 mm

Hexagonal: A/F from 6 to 30 0mm

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

(*) Although the terms bars and rods are often used interchangeably and present general similarities, rods come in a smaller cross sections and are usually less strong and durable than bars. Due to their strength and durability, bars are often used in structural applications while rods are typically used in non-structural ones such as reinforcing, decorative and others.

Seamless 4130/4140 alloy steel tubes/pipes are offered as part of AVIATIONEU NEW ERA product lines in rectangular or square shapes. Produced as cold drawn & cold rolling the tubes are intended for use in structural applications. These tubes can be delivered in different options (A.W.H.R. "as welded" from hot-rolled steel, A.W.C.R. "as welded" from cold-rolled steel, S.D.C.R.  "sink-drawn", cold-rolled steel, M.D. mandrel drawn or S.S.I.D. special smooth inside diameter). Sourced from quality producers, they conform to ASTM A519 specifications and can be furnished in the following ranges of wall thicknesses, outer dimensions and cut to order lengths:

Square Tubes  

Outer Dimesion (O.D.): 20-20 to 500-500 mm,

Wall Thickness  (W.T.): 1-24 mm,

Cut Length (L): Cut To Order - max12000 mm (12 m).

Rectangle Tubes 

Outer Dimesion (O.D.): 20-30 to 400-600 mm,

Wall Thickness  (W.T.): 1-24 mm,

Cut Length (L): Cut To Order - max12000 mm (12 m).

Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 3 Tons. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale. For additional information please refer to the attached chart or contact us.

Aluminum alloy 7075 (AL7075) is another "aircraft grade" aluminum with zinc and copper as its major alloying elements. Like aluminum alloy 2024 ((AL2024), AL7075 is a flexible and durable aluminum alloy extremely useful in highly stressed parts. Typically used in aerospace and defense, automotive, manufacturing and other applications requiring lighter weight and durable materials. This alloy is one of the strongest alloys available and is comparable to many types of steel featuring a high strength, low density (high strength-to-weight ratio), but also thermal properties and ability to be polished which makes AL7075 a preferred choice for the mold making industry. 

AL7075 aluminum alloy sheets are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality producers, they come in T6/T651 tempers (heat treated) and offered for cut to order in different thicknesses, widths and lengths, consisting a cost effective solution when large quantities of such sheets are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destinationcan be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the individual product presentations or contact us for quotation.

AISI/SAE(*) 4130 and 4140 grade steels are low-alloy steels containing chromium and molybdenum as common composition elements. Both are are popular steel materials due to their properties. AISI 4130 grade steel shows good overall combinations of strength, toughness and fatigue strength with good atmospheric corrosion resistance while AISI 4140 grade steel features a high fatigue strength, abrasion and impact resistance, toughness, and torsional strength. Both alloys are weldable with the use of all conventional techniques (AISI 4130 alloy's lower carbon composition compared to AISI 4140 allows easier welding) and machinable in the annealed condition. To make them stronger they need to be subjected to heat treatment, such as annealing, cold working, etc. 4140 and 4130 grade steels are wideky used in aerospace, oil and gas, automotive, agricultural and defense industries.

Round bars from AISI 4130/4140 structural steel alloys are offered as part of AVIATIONEU NEW ERA product lines for a wide range of uses in different applications (gears, connection rods, stem assemblies, pump shafts, tool holders and others. Sourced from quality producers, they are competitively priced and offered in different diameters ( 5.5-500 mm), pre-cut (5.8m, 6m, 11.8m) and cut to order lengths, consisting a cost effective solution when large quantities of such sheets are demanded. Unit of sale is 1 kilogrram (kg)) with Minimum Order Quantity (MOQ) 300 kilograms. Sea/sea-surface transport to customer destinationcan be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale. For additional information, please refer to the attached comparison table of specifications for different steel alloys or contact us for quotation.

(*) American Iron & Steel Institute (AISI), Society of Automotive Engineers (SAE)

Steel alloy 4130 (ST4130), also known as Chrome Moly is a general-purpose alloy steel widely used by the aviation and motorsports industries due to its tensile strength, weldability, fabrication, and  hardenability. Sourced from quality producers AVIATIONEU NEW ERA 4130 Alloy Steel welded round tubes are cold drawn, offered in Normalized (N) condition and can be used in mechanical engineering, automotive applications and machinery. They conform to ASTM A513 specifications and they are offered in different wall thicknesses (1-12.5 mm), outer diameters (OD  6-350 mm) and cut to order lengths (max12000 mm/12 m), in various heat treatment processes (no final thermal treatment, stress relieved, annealed or normalized). Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 3 Tons. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale. Mechanical properties, depending on the selected heat treatment process, are summarized below. For additional information please refer to the attached chart or contact us.

Yield Strength: 55 ksi/ 379 Mpa - 50 ksi/ 345 Mpa - 85 ksi/ 586 Mpa - 80 ksi/ 552 Mpa

Ultimate Strength: 72 ksi/ 496 Mpa - 70 ksi/ 483 Mpa - 95 ksi/ 655 Mpa - 90 ksi/ 621 Mpa

Enlongation (%): 10% - 20% - 5% - 10%

Rockwell Hardness B Scale: 80 - 100 - 90- 87

Anchor nuts (aka nutplates or anchor plates) are terms used interchangeably and relate to stamped sheet metal fasteners with an internally threaded tube and a plate with two clearance holes for rivets. They are used in blind mounted panel applications in aerospace and other industrial sectors where hex nuts cannot be used or an attached nut is required for ease of maintenance. 

Anchor nuts can be Fixed or Floating, the latter being easier to use due to their built-in nut (threaded hole) able to "float" slightly thus providing a convenient connection point for threaded rods, such as bolts, from the backside. In the case of Fixed anchor nuts, the built-in nut is static (i.e. without the capability to “float”) and the threaded rod must be positioned perfectly over the hole. Self-locking anchor nuts are those with a built-in locking mechanism preventing them from loosening over time from vibrations. They are extensively used in aerospace, automotive, and construction industries.

Depending on their intended application, nutplates conform to different military, aerospace, ISO or other industrial standards such as the German DIN, U.S. (ASME & ASTM, IFI, ANSI), British BS, Japanese JIS and others. They are offered as OEM parts under their respective brands or under our own labelled (AVIATIONEU NEW ERA) product lines intended as cost-effective alternatives to the respective OEM products. Listed in accordance with their standard of compliance, Fixed and Floating nutplates come in different materials (such as steel or CRES & finishes),  in single/double lug configurations and Metric ISO οr Unified thread sizes. There is currently no U.S. Military Standard (MS) specification for Metric nutplates. Depending on the selected product and availability, nutplates can be supplied with a dry film lube specified by the letter "L" in the respective part number. Those with countersunk rivet holes are specified by the letter "K" at the end of the part number.

Sourced from quality manufacturers, AVIATIONEU NEW ERA MS21078 series nutplates are fixed self-locking, two-lug nutplates with elastic insert and plain rivet holes.  Made from cadmium plated steel they are available in different Unified thread sizes and replace respective AN366F series nutplates.  Sold in pieces but also in packs where the specified number of nuts per pack is indicated after the letters "PK" in the product reference number (SKU). Appearing prices are always for the units of measurement used each time. Matching rivets are sold separately.

For additional information please refer to the supplied documentation or contact us.

Steel alloy 4130 (ST4130), also known as Chrome Moly after the 2 key elements of its composition, chromium, and molybdenum, is a general-purpose alloy steel widely used by the aviation and motorsports industries due to its tensile strength of 90,000 psi, weldability, fabrication, and mild hardenability in all offered forms (tubes, bars, sheets and plates). They are available in two different material states (Normalized and Annealed) depending on the process of how the material is heated and cooled.

The Normalized condition (sometimes referred to as "Condition N") is the harder and stronger condition and is best used when forming is not needed. Normalizing relieves internal stress on steel and improves toughness in steels that may harden after the cold working process. The Annealed condition (sometimes referred to as "Condition A") is the softer and formable condition and is best used when forming is needed. Annealing relieves internal stresses, softens and makes the material more ductile.

4130 alloy steel (Chromoly) tubes exhibit an excellent strength to weight ratio, they are malleable, very easy to weld, resistant to scaling and oxidation and have a clean, smooth finish on both the inside and the outside of the tubing. Square tubes are offered in Normalized (N) condition as part of our own branded (AVIATIONEU NEW ERA) product lines and conform to SAE AMS-T 6736 & AMS 6360 M(*) specifications. They can be furnished in different wall thicknesses, widths and heights in inches and in different pre cut lengths from 1 foot to 12 feet. Appearing selling prices are per foot of cut length. Unless otherwise mentioned, there is additional cost if manufacturing test reports are required. For additional information, please refer to the supplied documentation or contact us.

(*) Aerospace Material Specifications (AMS) established by the Society of Automotive Engineers (SAE).

One of the most versatile metals in manufacturing today is Aluminum used to produce products in an almost limitless number of shapes for an almost limitless number of uses.

AL2024, the so-called aircraft aluminum, is an aluminium alloy, with copper as the primary alloying element. It is used in applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. The addition of copper to this alloy makes 2024 one of the strongest aluminum alloys. It comes in different tempers (O without heat treatment or T with heat treatment). It is non-magnetic and heat treatable but it also is more succeptible to corrosion than most other aluminum alloys. 

Due to the poor corrosion resistance of this alloy  it is often clad (specified as CLAD or ALCLAD) in which case high-purity aluminium surface layers are metallurgically bonded to the aluminium alloy core material. 2024-T3 is typically used in structures where a high strength to weight ratio is necessary, clock parts, computer parts, hydraulic parts, bolts, valves, nuts, pistons, and gears. 

Aluminum 2024 tubes/pipes are offered as part of our own branded (AVIATIONEU NEW ERA) product lines.Tubes are designed to act as structural support, whereas pipes are designed to carry liquids and gases. AL2024 tubing comes in different shapes (round, square, orthogonal and others), tempers, dimensions and pre cut or cut to order lenght options with the ability to be heat treated for even higher strength, all at an affordable price. 

Two of the most commonly used processes for shaping aluminum include the extrusion and the drawing process. In the drawn aluminum tubing process the aluminum is pulled, or drawn into the die cavity, during which it undergoes what is called plastic deformation where the aluminum is stretched to achieve the desired shape. Drawn aluminum is most often used to create products including pots, cans, tubes and other circular objects. In the extrusion tubing process the formed shape is achived by first heating the aluminum to a very high temperature until it is soft and malleable but not liquid. Then it is forced or pushed through a die which enables molding and shaping of the desired final product. After extrusion, the finished extruded tubing product  begins to cool and harden becoming strong and durable and holding the desired shape.

The AVIATIONEU NEW ERA Aluminum alloy round tubes 2024 T3 temper are frequently used for aerospace as they offer an excellent strength-to-weight ratio, high fatigue resistance, and average machinability. They are offered as drawn and are available in different outer diameters, wall thicknesses and pre cut lengths in inches. Depending on the producer they meet AMS -4088, AMS -WW-T-700/3 and ASTM B210 specifications. For additional information, please refer to our Brief Guide on Aluminum Grades & Temper Designations or contact us.

Aluminum alloy 6061 (AL6061), with magnesium and silicon as its major alloying elements, is the most commonly used aluminum alloy in the world. It is a cold-treated aluminum forging product with the advantages of 4000 Series and 5000 Series. When heat-treated, 6061 aluminum alloys are a great choice for general purpose uses and find many applications in structural materials, electronics, chemical equipment, and others. This alloy features high strength, good corrosion resistance, weldability, and machinability. It comes in different tempers  such as O (annealed), or tempered grades, 6061-T4 and 6061-T6. Compared to AL2024, the so-called aircraft aluminum, 2024 should be generally selected if strength is a priority or for forming applications.  In terms of machinability, 6061 aluminum is one of the most popular machining alloys and therefore often preferred if machining procedures are necessary for a project.

AL6061 tubes/pipes are offered as part of our own branded (AVIATIONEU NEW ERA) product lines.Tubes are designed to act as structural support, whereas pipes are designed to carry liquids and gases. AL6061 tubing come in different shapes (round, square, orthogonal and others), tempers (T6 or T651 ), dimensions and pre cut or cut to order lenght options with the ability to be heat treated for even higher strength, all at an affordable price. 

The AVIATIONEU NEW ERA 6061 T6 aluminum round tubes are offered as Drawn or Extruded (indicated respectively by the words "DRW" and "EXTRD" in the product SKU). They are available in different outer diameters, wall thicknesses and pre cut lengths in inches. The drawn tubes meet ASTM -B210 and AMS -4082 specifications while the extruded tubes comply with AMS-QQ-A-200/8, ASTM-B221, ASTM-B429 specifications. For additional information, please refer to our Brief Guide on Aluminum Grades & Temper Designations  or contact us.

AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. Although It is non heat-treatable, it is the highest strength alloy of other non-heat-treatable grades also featuring an excellent weldability using most common techniques, high resistance to marine atmoshpere and salt water corrosion, smooth surface, lightweight and high-tensile strength. This alloy is comparable to the 6061 aluminum alloy (AL6061). 

AL5052-O CLAD (ALCLAD) tubes(*) are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other grade aluminum and steel alloys. Sourced from quality producers, they are offered as Annealed in different outer diameters and wall thicknesses in inches and  cut to order lengths up to 5 ft (60 in.). They can be used for low and medium pressure hydraulic systems, fuel lines and oil lines. Tubing is sold by foot. There is additional cost if manufacturing test reports are required.

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the supplied documentation or contact us for quotation.

(*) ALCLAD is a corrosion-resistant aluminium sheet formed from high-purity aluminium surface layers metallurgically bonded (rolled onto) to high-strength aluminium alloy core material. As an enhanced sheet for fuselage applications, ALCLAD offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. ALCLAD also offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

Flared sleeve fittings are cylindrical metallic parts designed to be used on tubing to back up the flared end and provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.

Coupling sleeves conforming to SAE International, standard AS5176 standard replace respective MS20819/AN819 sleeves and they are offered as part of our own (AVIATIONEU NEW ERA) product lines. Sourced from quality producers these fittings are manufactured in different materials including 4130 Steel, Copper, Corrosion Resistant Steel (CRES) and Aluminum & Titanium Alloys. Material Code Letters in the part numbers indicate the composition of the fitting.

Depending on their Part Number they are sold in pieces but also in packs a with specified number of fittings indicated after the letters "PK" in the product reference number (SKU).

Flared tube coupling nuts conforming SAE International standard AS5175 are used for a leak-free solution on aircraft and other applications replacing respective AN818 parts. They are offered  as part of our own (AVIATIONEU NEW ERA) product lines in different materials and grades and multiple thread sizes to suit application needs. Material Code Letters in the part numbers indicate the composition of the fitting (No code for Steel 1137 or 4130, "D" for Aluminum alloys (except 7075-T73), "J" for 304 Stainless Steel (CRES 304), "K" for 316 Stainless Steel (CRES 316), "T" for Titanium 64AI-4V or "W" for Aluminum 7075-T73. These nuts are designed to be used with AS5176 and MS20819 sleeves. The 2 digits after the series code indicate the tubing outer diameter (O.D.)  in inches. Finish code “V” in the PN indicates high purity Aluminum coating for “W” or “D” fittings. Depending on their Part Number they are sold in pieces but also in packs a with specified number of fittings indicated after the letters "PK" in the product reference number (SKU).

Note: In SAE AS standards for new designs, aluminum fittings with material code letter D in their Part or Identifying Number (PIN) are replaced by those with material code letter W for Aluminum Alloy 7075-T73 providing a higher tensile strength.

Steel alloy 4130 (ST4130), also known as Chrome Moly after the 2 key alloying elements, chromium, and molybdenum, is a general-purpose alloy steel widely used by the aviation and motorsports industries due to its weldability, fabrication, and mild hardenability in all offered forms (tubes, bars, sheets and plates). 

4130 alloy steel sheets are offered as part of AVIATIONEU NEW ERA product lines for a wide range of uses including structural applications, including gears, fasteners, and and aircraft exteriors. These sheets offer good weldability without compromising steel abrasion and impact resistance and can be made even stronger throough heat treatment.AVIATIONEU NEW ERA 4130 alloy steel sheets undergo a heat treating process and they are available in two different material states, Normalized or Annealed,  depending on the process of how the material is heated and cooled. The letters "NRZ" and "ANL" specify respectively Normalized or Annealed state in our Reference Codes (SKUs) for ordering of materials.  4130 Annealed steel sheets are produced to the aerospace specification AMS-6350 (sometimes referred to as "Condition A") while Normalized ones meet aerospace specification AMS-6345 (also known as "Condition N"). Annealed steel sheets are "softer" than their normalized steel counterparts and offer higher workability. Normalized steel sheets offer a higher strength tolerance.

Sourced from quality producers, these sheets are offered in different thicknesses and specific widths and lengths in inches. For additional information, please refer to our supplied documentation, the individual product presentations or contact us for quotation.

Steel alloy 4130 (ST4130), also known as Chrome Moly after the 2 key alloying elements, chromium, and molybdenum, is a general-purpose alloy steel widely used by the aviation and motorsports industries due to its weldability, fabrication, and mild hardenability in all offered forms (tubes, bars, sheets and plates). 

4130 alloy steel sheets are offered as part of AVIATIONEU NEW ERA product lines for a wide range of uses including structural applications, including gears, fasteners, and and aircraft exteriors. These sheets offer good weldability without compromising steel abrasion and impact resistance and can be made even stronger throough heat treatment.AVIATIONEU NEW ERA 4130 alloy steel sheets undergo a heat treating process and they are available in two different material states, Normalized or Annealed,  depending on the process of how the material is heated and cooled. The letters "NRZ" and "ANL" specify respectively Normalized or Annealed state in our Reference Codes (SKUs) for ordering of materials.  4130 Annealed steel sheets are produced to the aerospace specification AMS-6350 (sometimes referred to as "Condition A") while Normalized ones meet aerospace specification AMS-6345 (also known as "Condition N"). Annealed steel sheets are "softer" than their normalized steel counterparts and offer higher workability. Normalized steel sheets offer a higher strength tolerance.

Sourced from quality producers, these sheets are offered in different thicknesses and specific widths and lengths in inches. For additional information, please refer to our supplied documentation, the individual product presentations or contact us for quotation.