Anti-Slip coatings are designed to prevent slips, trips and falls. These coatings can be applied to a wide variety of surfaces, including floors, ramps, stairs, and walkways, improving safety in public areas such as parks, stores, and shopping malls, homes, businesses, schools, hospitals and other workplaces.

HOLCIM AMERICAN SAFETY TECHNOLOGIES® (AST) brand is a leading brand for Non-Skid/Anti-Slip solutions for use in a wide range of applications in Military (Marine), Commercial, Industrial, Residential, Hospitality, Medical & Municipal sectors. Their product portfolio includes military grade marine non-skid and deck coatings, industrial anti-slip coatings, primers & accessories famous for their toughness and reliability. More information on AST products is included in the Product Description section and the supplied documentation.

Varnishes are materials widely used for covering surfaces for decorative and protective purposes.Different varnishes are offered to meet specific application requirements. Traditional Lacquers have been  and are still used for woodworking applications. Conversion Varnishes (CV), aka catalyzed conversion varnishes or catalyzed varnishes, are commonly used on woodworks but also for other applications in place of traditional lacquers and other finishes. They are lacquers containing a hardening agent added to the varnish prior to painting, providing additional durability when combined with the heat-curing process. A conversion varnish is chemically cured, fast-drying and consists of 40-60% solids. Polyurethane finishes are also used as they are often considered highly durable finishes. Polyurethane can resist scratching, heat, alkali, and acids and wear better than many other finishes, including lacquer.

Varnishes are offered by their respective manufacturers under their own brands in different packaging options. For additional information please consult the supplied documentation and information included in the Product Description section.

Some of the offered varnishes and their matching thinners are listed and briefly presented below. For non-listed products please contact us.

INDESTRUCTIBLE PAINT IP8-1302 Electrical Insulating Varnish is a single pack, water-resistant gloss varnish, suitable for use in situations where Class A, Class E or Class B insulation is required and where contact with moisture, salt spray and mineral lubricating oils is likely to occur. Typically used on coils, armature windings and electrical and radio apparatus. Approvals/Specifications: Def Stan 80-129, Issue 2 – Fungicidal Grade, Alternative to 010-1301 / 010-1302, Supercedes Def 31 or Def 32. When tested on properly prepared surfaces and allowed to dry completely, IP8-1302 will meet or exceed the requirements to DEF STAN 80-129 /4, Type 2. Supercedes Def 31 or Def 32.

AKZONOBEL AERODUR Clear 43022 (aka Vernis Vernelec 43022 Clear Coat Varnish) and AERODUR Clear Fluo 43023 are a one component polyurethane finish for printed circuits and component protection. Can be used as base materials with Thinner r D4064. Conform specifications Dassault DGQT 1.7.0.0138 & Eurocopter ECS-L 2228.

PPG AEROSPACE CV122 Electrical Insulating and Aerospace Wood Varnish, a single-pack, air drying,water & fungal resistant gloss varnish suitable for application as an electrical insulating coating or wood varnish.Specifications/Approvals: BSX17, DEF STAN 80-129/4 Type 2.

GENERAL FINISHES ENDURO Conversion Varnish is a water based two component post catalyzed urethane topcoat suitable for commercial woodwork applications where ultimate durability is necessary such as bar tops. It has a 6-8 hour pot life once catalyzed and can be re-coated in 1-2 hours.Offered in Flat, Satin, Semi-Gloss, and Gloss finishes.

SUNCHEMICAL®, member of the DIC CORPORATION Group of companies, is a leading supplier of packaging & graphic products, pigments and color materials, advanced materials such as liquid compounds, solid compounds and application materials for printed circuits, printed electronics, solar modules, and others as well as product counterfeiting protection solutions.

SUNCHEMICAL® packaging & graphic product range includes printing inks, coatings, adhesives and supplies for the packaging, publication, commercial, industrial, and digital markets. SUNCHEMICAL® also develops a wide range of pigments and color materials for architectural, automotive and industrial coatings, cosmetics, plastics, printing inks, agricultural, and more. Combining its pigments with DIC’s polymers for the same industries can create superior benefits and value for coatings formulators.

SUNCHEMICAL® SUNPROMO™ conventional inks and SUNPROMO™  UV inks offer a complete package of easy-to-use inks and varnishes for screen traditional screen graphic printing while SUNCHEMICAL®  SUNCOAT™ range of products extending from preparation materials and cleansers to reclaiming products. SUNPROMO™ Screen Inks can be used for paper and board applications (posters / graphics and displays, indoor and outdoor graphics and displays, print finishing),  in flat plastics (stickers, indoor and outdoor signs and displays,  banners and folders, and  formed and heat bent plastic panels for indoor and outdoor use), as well as on hard surfaces for the creation of signs, banners and folders, and formed and heat bent plastic panels.

SUNCHEMICAL® & DIC Advanced Materials include liquid compounds, solid compounds and application materials for printed circuits, printed electronics, solar modules, digital inkjet printing, automotive components, adhesives, magnetic tapes for plastic cards and degasification modules.

For additional information on SUNCHEMICAL® products please consult the Product Description section and the supplied documentation.

PPG Aerospace manufactures and provides a unique group of products including aircraft windshields and windows to the commercial, regional, military and general aviation segments, aircraft coatings and sealants for aircraft structures. 

PPG AEROSPACE® wide range of primers, surfacers and fillers are designed to cover a broad set of needs. Extensive colour sets and different packings are offered, enabling enhanced productivity. These work with any kind of equipment, providing flexibility and ease of use. 

PPG AEROSPACE® range of primers are always aligned with CMSs' most stringent requirements. They are designed to ensure an optimum repair finish but also durable mechanical performance to be able to resist heavy-duty usage in certain applications and include:

Etch Primers designed for excellent corrosion resistance and adhesive properties over metal substrates, such as steel, galvanised steel and aluminium.

Wet-on-Wet Primers for optimum process speed and excellent appearance.

Primer Surfacers and Fillers designed to achieve film build to fill scratches and provide a level surface. They provide a good gloss hold-out over a wide range of substrates including sound original paintwork, bare steel, polyester bodyfillers and etch primers.

Epoxy Primers dedicated to provide the best possible durability and corrosion resistance.

PPG AEROSPACE® Desothane® HS range of polyurethane and epoxy topcoats cover both civil aviation and military aircraft applications. 

 For additional information on our offered PPG AEROSPACE® products please consult the Product Description section and the supplied documentation.

NIC INDUSTRIES, Inc., manufactures industry-leading coatings under CERAKOTE®, PRISMATIC POWDERS®, and PERFORMANCE MATERIALS® brands, operating as separate NIC divisions. NIC coatings serve a wide range of applications in different industries from aerospace, defence, electronics, marine, to automotive, manufacturing, energy, industrial, sporting goods, and more. 

NIC CERAKOTE® state of-the-art coating technology is an extremely durable, heat, abrasion and chemical resistant ceramic epoxy coating. CERAKOTE® While Cerakote has become the firearm industry standard but they  are widely used in industries ranging from automotive to aerospace and from consumer and interior décor to defense. For aerospace applications, CERAKOTE® provides a single layer coating, 0.25-2.0 mils thin, providing resistance to hydraulic fluids, fuels, solvents, acids, de-icing products, and commercial strength disinfectants. 

NIC CERAKOTE® Ceramic Coatings are offered in different series to cover diverse application requirements. The Elite Series of Oven Cure coatings is perfect for applications requiring tight tolerances and typically eliminates the need for masking. Commonly used in applications for aerospace, defence, electronics, marine, manufacturing, and more. The H Series Oven Cure coatings are used in applications for defence, electronics, marine, and construction. The C (High Temperature) Series Air Cure coatings are formulated to withstand temperatures up to1,800˚F and they are commonly used in applications for aerospace, alternative energy, defense, industrial, manufacturing, and oil & gas. CERAKOTE® V (High Temperature) Series Oven Cure coatings withstand temperatures up to 1,800˚F and are commonly used in aerospace, automotive, energy, industrial, and manufacturing. In addition, CERAKOTE® Specialty Series Air & Oven Cure coatings are offered such as performance based clear coatings, low thermal conductive coatings, used primarily on top of pistons, engine valves and combustion chambers or high thermally conductive coatings, used primarily for radiators, intercoolers, and heat exchangers.

Starter and Pro Kits combining coatings and essential tools and eqipment for beginners and professional applicators respectively are also offered for trying CERAKOTE® coatings in different applications.

For additional information on NIC CERAKOTE® coatings please consult the Product Description section and the supplied documentation.

LVP POWDER & PAINTS (LVP), a subsidiary company of the Crosslink Powder Coating Corporation, is manufacturer of touch up paints & reseller of powder coating powders. The latter are produced from popular brands like PPG, Tiger Drylac, IFS, Sherwin Williams and Cardinal Paints. LVP Touch Up Paints use an acrylic enamel which offers powerful surface protection from a single component. This quick dry enamel is especially useful for products made out of metal and plastic like industrial equipment, furniture, household products, and machinery. Unlike most cheap generic paint products, LVP paints offer a outstanding film hardness and exterior durability allowing quick coating, packing and shipping without compromising the integrity of the equipment. LVP touch up paints’ features & benefits include:

Fast drying: To Touch: (15-30/min) To Handle:(1-2/hours) 

Excellent flow and leveling

Excellent adhesion

Can be applied direct-to-metal

Compatible over a variety of primers

Available in a wide-range of custom colors

Can be aerosol applied

Designed for exterior performance

Available in different color standards RAL | FED-STD-595 | AMS-STD-595

Markets: Powder Coating Products | Fabricated Metal | Industrial Equipment | Telecommunications | Material Handling | Heavy Duty Equipment | Agriculture Equipment | Household Furniture

For additional information on LVP powder coating and painting products please consult the supplied documentation.

JOHN HOGG is a market leader in fuel marking & speciality chemical technology. Their extensive portfolio includes regulatory fuel dyes and markers to help fight governments against tax evasion and fraudulent use of rebated & subsidised fuels, and oil companies to secure product integrity across the supply chain, speciality dyes such as solvent dyes for lubricants or Non-Destructive Testing (NDT) dyes for detection of cracks or defects in metal & ceramic surfaces as well as fluorescent leak detection dyes for final QC tests.

Fuel dyes and fuel markers are both additives used to differentiate fuels based on tax, regulation, or quality, with dyes providing visual color and markers offering chemical identification. 

JOHN HOGG Dyeguard® Anti-Theft solvent dyes for fuels provide a simple, effecive way to protect on-site fuel by creating a visible deterrent & aiding identification. Available in liquid and powder forms and colouring capabilities. Solvent powder dyes are extremely pure (98%+ dye content). Typical application levels would be 10-100 ppm. The powdered dyes require pre-dissolving in a small quantity of fuel. This concentrated solution can be added to the bulk to achieve the desired shade.

Anti-theft fuel dyes can be sold worldwide, provided all relevant international and national regulations are met.  The export process must adhere to a complex web of chemical regulations and local fuel laws, which vary by country.

Shipment of these products in liquid form is governed by international transport regulations for dangerous goods, such as ADR (road), IMDG (marine), and IATA (air freight) standards. Respective products in powder form are not HAZMAT regulated.

For further information please contact us.

ASG CORPORATION ASG KUBER brand relates to an extensive product portfolio offering solutions for applications in the Defence, Aerospace, Marine Ground, Automotive, Rail and Industrial sectors, including parts, tools, lubricants, lighting, batteries and others.

ASG KUBER MIL-R-25134 B Paint Remover & Lacquer Solvent is a thickened, non phenolic aircraft paint stripper which meets the requirements of BOEING Document D6-17487 and MIL-PRF-25134 C. MIL-R-25134 B is a viscous liquid developed to remove multiple coats of paint. It clings to vertical as well as the underside of horizontal surfaces. MIL-R-25134 B can be applied as received by brushing or spraying. It is specially designed to remove lacquer and enamel coating finishes from metal surfaces of aircraft or other surfaces while it can also be used for stripping various types of paints such as varnish, zinc chromate primer, epoxy, polyurethane, etc.

Allow MIL-R-25134 B sufficient dwell time for thorough loosening or blistering of the paint. When paint is loose, thoroughly agitate all areas with a stiff bristle brush. The complete removal of the paint residues is accomplished with high pressure, high volume, cold water or with a steam cleaning machine. Normally one coat of MIL-R-25134 B is sufficient to remove more than one paint coating. Where multicoat systems have to be removed, it may be necessary to use more than one application of MIL-R-25134 B.

Product Features & Benefits

Safe to all metals.

Very effective, normally removes more than one coating of paint.

Non-flammable.

Free of phenolics.

Easily rinsed with cold water.

Can be applied by brush or non-atomizing spray methods.

Used as received (Ready-To-Use). No mixing or dilution required.

Used at room temperature.

Dyes and Pigments represent the two principal types of colorants widely used in industrial and consumer products. They impart color through different methods.  

The main difference between the two is that dyes/dyestuffs provide their color by attaching to a substrate, or by dissolving in a solvent like water, alcohol, or oil, through which the dye becomes part of the material chemical solution. Pigments provide color without any required interaction with another substance. Pigments are insoluble powders that exist as suspended particles in a binder. Other differences include their application mechanism, the typically transparent appearance of dyes versus opacity of pigments, their durability (fastness) with pigments being generally more fade-resistant and chemically stable than less resistant to fading and washing dyes, but also the field of application with solvent dyes (specifically oil-soluble) and water-soluble dyes dyes commonly used on fuels (petrol, oil), lubricants, greases, candles, plastics (PS, ABS, PC), textiles, food, leather, hair color, wood stains, or varnishes while pigments on paints (acrylic, oil), inks for inkjet printers, plastics, cosmetics, and printing. 

Solvent dyes (specifically oil-soluble) are non-ionic organic compounds dissolving in oils, hydrocarbon solvents, waxes, and fats. Widely used in fuels (petrol, oil) for regulatory purposes but also on lubricants, greases, plastics for distinguishing brands, conformance to precise specifications set by OEMs, etc.They are resistant to water and ideal for non-polar, transparent, or oily substrates. Water-soluble dyes dissolve in water and alcohols providing intense, deep colors to hydrophilic materials, and are commonly encountered in  textiles, paper, hair coloring, cosmetics, and food coloring.

Sourced from quality producers, liquid and powder solvent dyes are now offered as part of AVIATIONEU NEW ERA product lines in different packaging options. Our oil and water soluble dyes are intended for use as cost effective solutions for numerous applications instead of competitive brands. In general, liquid dyes are supplied ready to use  (without prior pre-dissolving need) and consist a preferred choice for quick, even coloring whereas our powder dyes are often selected for their higher concentration, longer shelf life for storage, dry mixing or transport convenience (non-hazmat regulated).

For additional information please refer to the supplied documentation or contact us.

Hempel A/S is a leading solution provider for coatings used in an extensive range of protective, decorative, marine, container, industrial, and yacht applications. Sold under different brands Hempel's product portfolio includes topcoats, primers / intermediates, thinners, varnishes, linings, antifouling, CUI/heat/insulation products as well as products for pipe coating , cargo holds, cargo tanks, wind blades, road marking, and other uses. Hempel"s brands and respective products are briefly presented in the Product Description section.

Note: Required color shade must be specified at the time of ordering. Price variations apply depending on selected shade. Please consult the supplied documentation & contact us for quotation.

Most airplanes nowadays are painted in vibrant colors, with designs and logos that need to retain their "fresh" appearance till repaint despite their operation in  harsh weather and environmental conditions. The types of paint used on arcraft are enamel and epoxy. For more information about these 2 types of paints please refer to the Product Description section.

AKZONOBEL Aerospace Coatings is the global leader in the manufacture, development and supply of of high performance paints and coatings for civil and military aerospace applications. They are widely used in the OEM and MRO sectors of the commercial airline, general aviation and the military air markets. AKZONOBEL Aerospace Coatings product porfolio includes among others primers, polyurethane top coats, fillers, surfacers, abrasion resistant materials as well as composite, conductive, insulation & other coatings. AKZONOBEL solutions include also training, technical advice and coatings consultancy.

AKZONOBEL Aerospace ECLIPSE (ECL-G) range of Gloss Polyurethane Top Coats (aka topcoats)  are gloss, chemically cured, low VOC topcoats designed to provide distinctness of image (DOI). Their balanced formulation provides superior chemical resistance, stain resistance and flexibility. They are qualified/approved to an extensive list of specifications.

ECL-G-92 Top Coats meet Boeing BAC 701 and BMS10-60 Type I & II Class B Grade D performance specifications, ECL-G-2 Top Coats meet Boeing BMS 10-72 and  Bombardier - Canadair BAMS 565-002 specifications while ECL-G-7 Top Coats meet those of Boeing BMS 10-72 Type IX and Bombardier - Canadair BAMS 565-009.  

When used with AKZONOBEL primers 10P20-44, 10P20-44M or 10P20-44MNF (depending on OEM specification), the ECLIPSE topcoats provide a durable, long lasting, protective and decorative finish that exceeds typical OEM requirements for exterior aircraft performance. 

The ECLIPSE topcoats should be mixed with the AKZONOBEL Aerospace PC-233 Curing Solution and optional thinner separately sold. Please consult the supplied product Technical Data Sheet (TDS).

HAZARDOUS MATERIALS - UN1263, CL 3, III - Hazmat packaging & certification required. In addition, products in aerosol cans are generally prohibited to ship by air without Hazmat packaging & certification due to the possibility of aerosols combusting at high altitudes. 

For additional information, please refer to the supplied documentation or contact us.

Most airplanes nowadays are painted in vibrant colors, with designs and logos that need to retain their "fresh" appearance till repaint despite their operation in  harsh weather and environmental conditions. The types of paint used on arcraft are enamel and epoxy. For more information about these 2 types of paints please refer to the Product Description section.

PRODUCTS TEQHNIQUES INC. (PTI) is a manufacturer of chemicals, coatings and cleaners. PTI coatings product portfolio includes  over 131 coatings meeting military and federal specifications (MIL, MIS, ORD, TT, and FAA) and a number of proprietary formulations. PTI coating systems can be applied by spray, brush, dip, and aerosol. 

PTI trademarks & manufacturing license for worldwide sales of specialty coatings & solvents have passed to SOCOMORE S.A., a worldwide solutions provider in critical surface preparation, processing and protection in commercial aviation, defense, energy and industrial markets.The PTI product lines will remain unchanged, continue to be manufactured by PTI but they will be sold by SOCOMORE under SOCOGLAZE brand name.

SOCOMORE SOCOGLAZE TTE Series of enamel topcoats are high performance, single component enamel topcoats designed for interior use on high performance general aviation, business jet, and commercial aircraft and vehicles. These coatings are also excellent exterior coatings on substrates that are not subjected to harsh environments. TTE Series includes PT-381 (Gloss),  PT-382 (Semi Gloss) and PT-383 (Flat) enamel topcoats meeting and exceeding Military Specifications TT-E-489J, TT-E-529G & A-A-2962 and TT-E-527D respectively. Offered in bulk or aerosol they  can be applied over wood, composite or metal surfaces.  They can also be used on equipment, machinery, and metal parts as a high quality industrial enamel topcoat.

TTE topcoats are offered in 725 colors of US Federal Standard 595 (aka as SAE Aerospace Material Specification AMS-STD-595) used to identify and specify colors for military & civilian products. 595 colors are correlated to RAL, the European color coding system.

HAZARDOUS MATERIALS - UN1263, CL 3, III - Hazmat packaging & certification required. In addition, products in aerosol cans are generally prohibited to ship by air without Hazmat packaging & certification due to the possibility of combusting at high altitudes. 

For additional information, please refer to the supplied documentation or contact us.

INTERNATIONAL PAINT (abbreviated as INTERNATIONAL) is the leading brand of AKZONOBEL's Marine & Protective Coatings business unit, operating in more than 60 countries. INTERNATIONAL products are developed & produced by AKZONOBEL.  INTERNATIONAL  products include a wide range of  coatings. Their industrial product lines include corrosion & fire protection coatings for buildings,  coatings for abrasive and corrosive environments in mining applications, coatings & fire protection for upstream oil & gas for offshore oil and gas industries, corrosion protection products for  vessels & pipeline, thermal power plants, wind turbines and linings & corrosion protection in water & waste. Their respective marine products  include abrasion resistant / cargo hold , anti fouling,  cargo tank & water ballast tank coatings, foul release, deck coatings & potable water tank coatings, cosmetic finishes, primers/ tie coats, shop & universal primers and others. For additional information on AKZONOBEL INTERNATIONAL coatings, please consult the Product Description section, refer to the supplied documentation or contact us.