The AL2024 aluminum alloy (with copper as the primary alloying element) is often used in aircraft structural applications due to its high strength and fatigue resistance.  It is suitable for applications requiring high stress and strain resistance. The AL2024 aluminum alloy is stronger but less versatile than AL6061 alloy, which is more corrosion resistant, easier to weld, and more suited to machining, but less strong than the AL7075 alloy, also commonly used in the aerospace industry.

AL2024 aluminum alloy sheets are offered as part of AVIATIONEU NEW ERA product lines. They come as Annealed (O Temper) without heat treatment or as heat treated to attain their maximum strength. Heat treated sheets are available in vatious T tempers (such as T3,T4,T5,T6 and T651) for use in a range of aviation and industrial applications. 

Sourced from quality producers, AVIATIONEU NEW ERA AL2024-O aluminum sheets come without heat treatment. They are readily formed in the annealed condition, possess good machinability, may be heat treated and can be machined to a high finish. Since their corrosion resistance is relatively low, they are commonly used with an anodized finish or in CLAD (ALCLAD) form with a thin surface layer of high purity aluminum (please refer to separate product presentations). 

AVIATIONEU NEW ERA AL2024-O aluminum sheets are mostly offered for cut to order in different thicknesses, widths and lengths, consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations,  the individual product presentations or contact us for quotation.

AL2024 is an aluminium alloy, with copper as the primary alloying element. It is used in applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. It comes in different tempers (O without heat treatment or T with heat treatment).

AL2024 bars/rods are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other aluminum and steel alloys (e.g. AL5052, AL6061, AL7050, AL7075, ST4130, ST4140 etc.). They come in different cross sections such as round, rectangular,hexagonal or square. Like other AL2024 products, these bars/rods can be used in an extensive list of applications in aerospace, automotive and many other industrial sectors.

AVIATIONEU NEW ERA heat treated aluminum hexagonal bars from 2024 alloy are sourced from quality producers. They are offered in T3/T4/T6/T651 tempers for use in a range of aviation and industrial applications, consisting a cost effective solution when large quantities are demanded. They comply with ASTM specifications and they are available for cut to order in different dimensions and surface finishes. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AL2024 is an aluminium alloy, with copper as the primary alloying element. It is used in applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. It comes in different tempers (O without heat treatment or T with heat treatment).

AL2024 bars/rods are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other aluminum and steel alloys (e.g. AL5052, AL6061, AL7050, AL7075, ST4130, ST4140 etc.). They come in different cross sections such as round, rectangular,hexagonal or square. Like other AL2024 products, these bars/rods can be used in an extensive list of applications in aerospace, automotive and many other industrial sectors.

AVIATIONEU NEW ERA heat treated aluminum rectangular bars from 2024 alloy are sourced from quality producers. They are offered in T3/T4/T6/T651 tempers for use in a range of aviation and industrial applications, consisting a cost effective solution when large quantities are demanded. They comply with ASTM specifications and they are available for cut to order in different dimensions and surface finishes. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

The AL2024 aluminum alloy (with copper as the primary alloying element) also known as aerospace grade aluminum, is commonly used in aircraft structural applications due to its high strength and fatigue resistance. It is suitable for uses requiring high stress and strain resistance. This alloy is stronger but less versatile than AL6061 alloy, which is more corrosion resistant, easier to weld, and more suited to machining, but less strong than the AL7075 alloy. AL2024 aluminum alloy sheets come as Annealed (O Temper) without heat treatment or as heat treated to attain their maximum strength. Heat treated sheets are available in vatious T tempers (such as T3,T4,T5,T6 and T651) for use in a range of aviation and industrial applications.

2024 T3 Alloy Aluminum Sheets are offered as part of AVIATIONEU NEW ERA product lines for a wide range of uses including aerospace, clock parts, computer parts, hydraulic parts, bolts, valves, nuts, pistons and gears. Sourced from quality producers, these sheets are offered in different thicknesses and specific widths and lengths in inches and they are PVC film covered one/two side(s) (depending on the producer) for protection. Also offered as CLAD (aka ALCLAD) (*) for increased resistance to corrosion (see separate product presentation). They comply with SAE AMS and ASTM specifications. 

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the individual product presentations or contact us for quotation.

(*) CLAD, or sometimes referred to as ALCLAD,  is a corrosion-resistant aluminium sheet formed from high-purity aluminium surface layers metallurgically bonded (rolled onto) to high-strength aluminium alloy core material. As an enhanced sheet for fuselage applications, ALCLAD offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. ALCLAD also offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy.

AL2024 is an aluminium alloy, with copper as the primary alloying element. It is used in applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. It comes in different tempers (O without heat treatment or T with heat treatment). Due to the poor corrosion resistance of this alloy  it is often clad (specified as CLAD or ALCLAD) in which case high-purity aluminium surface layers are metallurgically bonded to the aluminium alloy core material. 

AL2024 bars/rods are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other aluminum and steel alloys (e.g. AL5052, AL6061, AL7050, AL7075, ST4130, ST4140 etc.). Like other AL2024 products these bars/rods can be used in an extensive list of applications in aerospace, automotive and many other industrial sectors.

AVIATIONEU NEW ERA 2024-T351 aluminum round bars/rods are sourced from quality producers. They are heat treated, cold finished and available in different diameters and pre-cut lengths in inches to meet application requirements.  They comply with ASTM -B211, AMS -4120 & AMS -QQ-A-225/6 specifications. For additional information, please refer to our Brief Guide on Aluminum Grades & Temper Designations,  the individual product presentations or contact us.

AL2024 is an aluminium alloy, with copper as the primary alloying element. It is used in applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. It comes in different tempers, O (Annealed)without heat treatment or T (heat treated). Since corrosion resistance is relatively low, 2024 is commonly used with an anodized finish or in clad form (specified as CLAD or ALCLAD) with a thin surface layer of high purity aluminum metallurgically bonded to the aluminium alloy core material.

AL2024 bars/rods are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other aluminum and steel alloys (e.g. AL5052, AL6061, AL7050, AL7075, ST4130, ST4140 etc.). Like other AL2024 products these bars/rods can be used in an extensive list of applications in aerospace, automotive and many other industrial sectors such as aircraft structural components, aircraft fittings, hardware, truck wheels and parts for the transportation industry.

AVIATIONEU NEW ERA 2024-T351 aluminum rectangular bars/rods are sourced from quality producers and offered either in different dimensions and pre-cut lengths in inches or cut to order (CTO) lengths in feet  to meet application requirements. The pre-cut bars/rods are cold finished and comply with ASTM -B211, AMS -4120 & AMS -QQ-A-225/6 specifications while those with cut to order lengths meet AMS-OQ-A-225/5, AMS 4120, ASTM B211 and UNS A92024 specifications.  Appearing prices are per piece for pre-cut bars/rods and per foot for those cut to order. 

For additional information, please refer to our Brief Guide on Aluminum Grades & Temper Designations,  the individual product presentations or contact us.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AL2024 is an aluminium alloy, with copper as the primary alloying element. It is used in applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. It comes in different tempers (O without heat treatment or T with heat treatment).

AL2024 bars/rods are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other aluminum and steel alloys (e.g. AL5052, AL6061, AL7050, AL7075, ST4130, ST4140 etc.). They come in different cross sections such as round, rectangular,hexagonal or square. Like other AL2024 products, these bars/rods can be used in an extensive list of applications in aerospace, automotive and many other industrial sectors.

AVIATIONEU NEW ERA heat treated aluminum round bars from 2024 alloy are sourced from quality producers. They are offered in T4 and T6 tempers for use in a range of aviation and industrial applications, consisting a cost effective solution when large quantities are demanded. They comply with ASTM specifications and they are available in different diameters (3mm-800mm) and cut to order lengths (1m-12m). Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AL2024 is an aluminium alloy, with copper as the primary alloying element. It is used in aircraft structural and other applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. This alloy  comes in  Annealed (O) condition  or different tempers and is readily formed and machined to a high finish in the annealed condition. It can be both hot and cold worked or forged, as well as welded through inert gas consumable electrode arc methods.

AL2024 extruded angles are produced by forcing a heated alumnium billet through a die of the proper shape by means of a hydraulic press. 

Sourced from quality producers they are offered in T3 or T3511 tempers but also in other tempers as part of our own branded (AVIATIONEU NEW ERA) product lines. The applicable temper is indicated in the product reference number (SKU). 

Both 2024-T3 aluminum and 2024-T3511 aluminum are variants of the same material. They share alloy composition and many physical properties, but develop different mechanical properties as a result of different processing (please refer to the respective property tables).

These angles are offered in different widths, heights  and thicknesses in inches and cut to order lengths in feet. Appearing sale price is per foot. If manufacturing test reports are required, additional charges are applied per order. For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for price on any unlisted size.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

The AL2024 aluminum alloy (with copper as the primary alloying element) also known as aerospace grade aluminum, is commonly used in aircraft structural applications due to its high strength and fatigue resistance.  It is suitable for applications requiring high stress and strain resistance. The AL2024 aluminum alloy is stronger but less versatile than AL6061 alloy, which is more corrosion resistant, easier to weld, and more suited to machining, but less strong than the AL7075 alloy.

AL2024 aluminum alloy sheets come as Annealed (O Temper) without heat treatment or as heat treated to attain their maximum strength. Heat treated sheets are available in vatious T tempers (such as T3,T4,T5,T6 and T651) for use in a range of aviation and industrial applications.

2024-O CLAD (ALCLAD) Aluminum alloy sheets(*) are offered as part of AVIATIONEU NEW ERA product lines and they consist an excellent choice when high corrosion resistance is needed. Sourced from quality producers, these sheets  are readily formed in the annealed condition and may be subsequently heat treated. They feature good machinability and can be machined to a high finish. They are offered in different thicknesses and specific widths and lengths in inches. They comply with AMS and ASTM specifications.

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the individual product presentations or contact us for quotation.

(*) ALCLAD is a corrosion-resistant aluminium sheet formed from high-purity aluminium surface layers metallurgically bonded (rolled onto) to high-strength aluminium alloy core material. As an enhanced sheet for fuselage applications, ALCLAD offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. ALCLAD also offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy.

The AL2024 aluminum alloy (with copper as the primary alloying element) is often referred to as aerospace grade aluminum as it is often used in aircraft structural applications due to its high strength and fatigue resistance.  It is suitable for applications requiring high stress and strain resistance. The AL2024 aluminum alloy is stronger but less versatile than AL6061 alloy, which is more corrosion resistant, easier to weld, and more suited to machining, but less strong than the AL7075 alloy, also commonly used in the aerospace industry.

AL2024 aluminum alloy sheets are offered as part of AVIATIONEU NEW ERA product lines. They come as Annealed (O Temper) without heat treatment or as heat treated to attain their maximum strength. Heat treated sheets are available in vatious T tempers (such as T3,T4,T5,T6 and T651) for use in a range of aviation and industrial applications (*). Sourced from quality producers, AVIATIONEU NEW ERA heat treated AL2024 alloy aluminum sheets are mostly offered for cut to order in different thicknesses, widths and lengths, consisting a cost effective solution when large quantities of such sheets are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destinationcan be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the individual product presentations or contact us and quotation.

(*) All aluminum alloys, regardless of product form, are classified as either heat-treatable or non heat-treatable, depending upon the method used to attain their maximum strength. The modification methods applied to heat- and non heat-treatable alloys are listed in the Temper Designation System.

AL2024 is an aluminium alloy, with copper as the primary alloying element. It is used in applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. It comes in different tempers (O without heat treatment or T with heat treatment).

AL2024 bars/rods are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other aluminum and steel alloys (e.g. AL5052, AL6061, AL7050, AL7075, ST4130, ST4140 etc.). They come in different cross sections such as round, rectangular,hexagonal or square. Like other AL2024 products, these bars/rods can be used in an extensive list of applications in aerospace, automotive and many other industrial sectors.

AVIATIONEU NEW ERA Aluminum 2024-T3 (heat treated) round rods are sourced from quality producers. They are offered in different diameters  in inches and cut to order lengths from 1 foot to 12 feet in increments of 1 foot. Appearing price is per foot. If manufacturing test reports are required, additional charges are applied per order. For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for price on any unlisted size.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AL2024 is an aluminium alloy, with copper as the primary alloying element. It is used in applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. It comes in different tempers (O without heat treatment or T with heat treatment).

AL2024 bars/rods are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other aluminum and steel alloys (e.g. AL5052, AL6061, AL7050, AL7075, ST4130, ST4140 etc.). They come in different cross sections such as round, rectangular,hexagonal or square. Like other AL2024 products, these bars/rods can be used in an extensive list of applications in aerospace, automotive and many other industrial sectors.

AVIATIONEU NEW ERA heat treated aluminum square bars from 2024 alloy are sourced from quality producers. They are offered in T3/T4/T6/T651 tempers for use in a range of aviation and industrial applications, consisting a cost effective solution when large quantities are demanded. They comply with ASTM specifications and they are available for cut to order in different dimensions and surface finishes. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.