AEROSHELL® Turbine Oil 560 is a third-generation 5-centistoke synthetic hindered ester lubricating oil, which offers reduced coking, improved wear resistance, and all-round commercially viable performance for modern jet engines. It meets or exceeds the most exacting requirements of turbine oil technology standards as outlined in SAE AS 5780A. For more information please refer to the attached documentation.

Product Features:

Reduced coke formation: Coke formation and shedding can be disruptive to airline operations. Reduced coke deposits can lower maintenance costs and increase on-wing life.

Fully compatible with other approved oils: No engine problems such as coke shedding and oil filters blocking is experienced when changing from one approved oil to AeroShell Turbine Engine Oil 560, in accordance with the engine manufacturer recommendations.

No adverse effect on elastomer seals: AEROSHELL® 560 has good elastomer compatibility which reduces the possibility of oil leaks that could lead to expensive engine overhauls or even an in-flight engine shutdown.

Good oxidative and thermal stability:The use of AEROSHELL® 560 reduces the occurrence of oxidative and thermal degradation of the oil at high operating temperatures, which could result in high overhaul and maintenance costs due to:

1. An increase in oil viscosity, which may result in the need for oil change;

2. An increase in acidity, which could lead to the corrosion of gears and bearings; and

3. Sludge formation in the oil system, causing the blockage of oil jets and filters.

AEROSHELL® Turbine Oil 560  Approvals:

US – Approved MIL-PRF-23699G Grade HTS, Approved SAE AS5780B Grade SPC

British – Equivalent DEFSTAN 91-101

French – Equivalent DCSEA 299/A

Russian – Analogue to VNII NP 50-1-4F, B3V, LZ-240, VNII NP 50-1-4U, and 36/Ku-A

NATO Code – O-154

Joint Service Designation – Equivalent OX-27

NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to the supplied list of offered products or contact us for additional information or assistance on non listed products.

AEROSHELL® Sport Plus 4  from Shell Aviation is a second generation multi-grade piston engine oil specifically designed for use in light sport and very light/ultralight aircraft 4-stroke engines in any climate. It is the first aviation oil in the market that is BRP-Rotax tested and meets Rotax RON 424 OEM specification. AEROSHELL® Sport Plus 4  is suitable for BRP-ROTAX 912, 914, 912 iS engine series. Provides enhanced anti-wear protection compared to the previous generation as well as enhanced protection and lubricity for the smooth movement of clutch and gearbox components. Can be used with both unleaded aviation and road fuels and Avgas 100LL. Integrated additives support anti–corrosion and anti-wear of critical parts, powerful anti-oxidation action, anti-foaming for engines operating with an integrated gearbox and neutralization of acid build up. 

NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to the general presentation of AEROSHELL® lubricants, the supplied documentation or contact us for additional information or assistance on non listed products.

AEROSHELL® Turbine Oil 308 is a 3 mm2/s synthetic ester oil incorporating additives to improve resistance to oxidation and corrosion and to minimise wear. It was developed specifically for use in particular models of aircraft turbo-prop and turbo-jet engines for which a MIL-PRF- 7808 (formerly MIL-L-7808) oil is required. AEROSHELL® 308 turbine oil contains a synthetic ester oil and should not be used in contact with incompatible seal materials and it also affects some paints and plastics.

Product Specifications/Approvals:

US – Approved MIL-PRF-7808L Grade 3

Nato Code O-148

Joint Service Designation – Equivalent OX-9

Airbus Helicopters CM  CM0113

NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to the supplied list of offered products or contact us for additional information or assistance on non listed products.

AEROSHELL® W15W50 Multigrade Aviation Piston Engine Oil has been specifically developed for aviation piston engines. This premium semi-synthetic multigrade ashless dispersant oil is a special blend of a high quality mineral oil and synthetic hydrocarbons with an advanced additive package that has been specifically formulated for multigrade applications. The combination of non-metallic anti-wear additives and selected high viscosity index mineral and synthetic base oils, offer exceptional stability, dispersancy and anti-foaming performance. The advanced additive package in AEROSHELL® W15W50 oil provides excellent protection to aviation piston engines operating at extreme ambient temperatures. The ashless anti-wear additive package provides exceptional wear protection for camshafts and lifters and other wearing surfaces.

AEROSHELL® W15W50 oil has become very popular amongst engine manufacturers and operators alike. In order to cater for those Lycoming engines that need improved load carrying, the Lycoming LW16702 antiwear additive has been incorporated into the formulation, thus eliminating the need for supplemental additive addition. Offered in 1 US Quart bottles, in cases of 6 US Quart bottles each and in 55 USG drums.

NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to the supplied list of offered products or contact us for additional information or assistance on non listed products.

XPS™ is a BRP® brand for engine oils and and care products for powersport and marine applications (from boats to bikes and everything in between).  XPS™ product range of powersport engine oils includes oils for off-road, on-road and snowmobile applications and most of them can be used in multiple applications. More information are provided in the Product Description section. For XPS™ care and marine products see their separate presentations. 

XPS™ OFF-ROAD  OILS

4T 5W-40 SYNTHETIC BLEND OIL with premium anti-wear and anticorrosion additives for off-road, on-road and PWC 4-stroke engines, including turbo or supercharged powersports engines. Provides superior engine and transmission protection against rust and corrosion, even in extreme conditions.

4T 10W-40 SYNTHETIC BLEND OIL with premium anti-wear additives for superior engine and transmission protection against heat, rust and corrosion.

4T 10W-50 SYNTHETIC OIL with premium anti-wear and anticorrosion additives for off-road, on-road and PWC 4-stroke engines, including turbo or supercharged powersports engines. Provides superior engine and transmission protection against rust and corrosion.

XPS™  ON-ROAD OILS

4T V-TWIN 20W-50 SYNTHETIC OIL designed for liquid-cooled and air-cooled V-twin 4-stroke motorcycle engines and gear transmission use. Provides superior protection against rust, corrosion and high heat of air-cooled V-twin engines.

4T MOTO 10W- 40 SYNTHETIC OIL for motorcycle engines and transmissions. Protects against heat, rust and corrosion, even in the harshest conditions. Fully compatible with catalytic converters.

4T 5W-40 SYNTHETIC BLEND OIL with premium anti-wear and anti-corrosion additives for off-road, on-road and PWC 4-stroke engines, including turbo or supercharged powersports engines. Provides superior engine and transmission protection against rust and corrosion.

XPS™ SNOWMOBILE  OILS

2T E-TEC® SYNTHETIC OIL meets the unique needs of Rotax® engines. Provides maximum protection against wear in E-TEC engines, and keeps components lubricated, clean and free of wear. It can be used in direct or semi-direct fuel injection systems and high performance carburetor 2-stroke engines. 

2T SNOWMOBILE SYNTHETIC OIL for 2-stroke snowmobiles with the latest in high performance engine technology. Specifically formulated for electronic fuel injection system, direct injection, semi-direct injection, exhaust valves and high performance carbureted 2-stroke engines. Provides low smoke and easy cold starting.

Slick magnetos by CHAMPION AEROSPACE are used on nearly all aircraft piston engines. They are OEM approved for more than 225,000 aviation engines and exhibit distinct design and operational features such as smaller and lighter design, radio noise suppression, lift-off housing and easy maintenance. 

The following CHAMPION AEROSPACE approved lubricants are offered for use in the mainenance and overhaul of these magnetos to ensure their long service life.

R5008 Magneto Bushing Oil

EXXONMOBIL® Mobil TERESSTIC 100 Series oil. TERESSTIC is the brand name for a line of long-service-life lubricating oils. They are formulated with carefully selected base stocks and highly effective additives, including oxidation and rust inhibitors and anti-foam agents.

The TERESSTIC line of circulating oils consists of nine viscosity grades. Eight of these grades are blended to viscosity values that conform to the International Organization for Standardization (ISO) viscosity classification system.

Uses: Distributor block and gear assembly Oilite bearings. 

M1827 Rotor Cam Grease

Proprietary liquid lubricant developed through Boeing manufacturing operations and lubricant experience.

Always consult CHAMPION AEROSPACE manuals for the proper use of these lubricants.

For additional information please refer to the supplied documentation.

SOUTHWESTERN PETROLEUM LUBRICANTS LLC. (SWEPCO) is a manufacturer of technologically advanced lubricants that protect equipment assets in even the most severe operating conditions while helping companies around the world reduce overall operating costs through increased uptime and productivity and lowering maintenance and lubrication expenses. SWEPCO brand lubricants and specialty compounds are used in a wide range of applications serving the needs of Construction, Mining, Manufacturing, Marine &Transportation industries. For additional information on SWEPCO products please consult the Product Description section and the supplied documentation.

Atlas Copco Roto Inject Fluid (RIF) NDURANCE is a mineral based oil specially formulated to protect GA-GX rotary screw compressors. RIF NDURANCE unique additive package enables its operation in harmony with all other components in the compressor.

RIF NDURANCE allows the compressor to operate in dusty and humid conditions and keeping the system deposit free. Protects the compressor against oxidation leading to a longer drain interval, up to 4 000h or 1 year when operatng in mild conditons.

Its tailor made viscosity (55mm²/s) together with specially designed an -wear additives provide the compressor with the right lubrication for rotors, bearings and gears for a wide spread of operating conditions, preventing metal-metal contact of critical parts.

Ensures that lubricant will keep its original properties after separation from water. It will also keep water out of the oil circuit, avoiding corrosion on the metal parts.

RIF NDURANCE  is offered in different containers with 5, 20, 209  and 1000 liters' capacity.

For additional information please refer to the supplied documentation.

Manufactured by RADCO INDUSTRIES, RADCOLUBE® is an exceptional 3-in-1 Gun Oil for cleaning, lubricating, and short-term preservation of small and large caliber firearm platforms making their maintenance safe & convenient . With its advanced formulation and adherence to industry standards, this gun oil guarantees superior performance, reliability, and longevity for firearms used in diverse environments. It is the trusted brand of the US Military, Law Enforcement, and Competitive Shooters across the globe. RADCOLUBE® CLP Gun Oil 3IN1 is also the preferred firearm cleaner and lubricant of The Tactical Games™ (TTG) , Multi-Gun Competitors, Extreme Long Range Shooting Organization™ (ELRSO) and King of 2 Mile™ (KO2M) shooting organizations.

RADCOLUBE® CLP keeps small & large caliber weapons in optimum condition and can be used in harsh environments, including cold, salt & dust. It maintains maximum firing performance maintaining any weapon’s maximum firing rate without incident.

Being a Military-Grade CLP gun cleaner and lubricant, RADCOLUBE® CLP  addresses all aspects of the cleaning process, simplifies firearm maintenance, adheres to MIL-PRF-63460F specifications and meets the qualifications of DOD.

RADCOLUBE® CLP has a maximum recommended shelf life of 6 years from date of manufacture.

For additional information please consult the supplied documentation.

AEROSHELL® 100 Series SAE 50 Mineral Aviation Piston Engine Oils are  straight mineral oils blended from selected high viscosity index base oil. They are offered as AEROSHELL® 100 mineral break in oil with no additives, AEROSHELL® W100 mineral ashless dispersant oil for normal use and  AEROSHELL® W100 PLUS mineral ashless dispersant oil with a friction modifier/anti-wear additive package. They are approved for all aviation civil aircraft piston engines. The specially blended high viscosity index base oil in AeroShell oil 100 series oils has been designed to provide effective protection to engine components compared to conventional mineral oils.

AEROSHELL® 100 SAE 50 is to be used when an oil without a dispersant additive is required during the break-in of  new aviation piston engines or those recently overhauled. AEROSHELL® W100 oil includes very small amounts of pour point depressant to improve fluidity at very low temperatures and an anti-oxidant. This helps ensure complete confidence and peace of mind knowing that your aircraft will perform reliably in between scheduled overhauls.

AEROSHELL® 100 Series oils are produced to meet fully the SAE specification J-1966 (Grades SAE 50 respectively).  Furthermore, they have military qualification approval and are listed on the Qualified Products List (QPL) issued by the US Navy and on the Technically Acceptable Products List (TAPL) issued by the UK Ministry of Defence. Common packing options include 1 US Quart bottles, cases of 6  or 12 1 US Quart bottles, pails of 5 US Gallons  and drums of 55 US Gallons.

Please also refer to the attached documentation.

NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to the supplied list of offered products or contact us for additional information or assistance on non listed products.

EXXONMOBIL® MOBIL® Gear Lubricants are formulated to help protect and extend the life of transaxle, rear axle and differential gears. They provide outstanding protection, even in some of the most extreme operating conditions. They include:

MOBIL® 75W-90 and 75W-140 Multi-Purpose Automotive Gear Lubricants designed to help meet the highest level performance requirements of modern passenger vehicles in all types of operating conditions including limited slip applications, as well as, deliver outstanding power transfer performance.

MOBIL® 80W-90 and 85W-140 Commercial Gear Oils engineered for performance in heavy-duty commercial transmissions, axles and final drives where extreme pressures and shock loading are expected. Applicable for on-highway light and heavy-duty trucks, buses, vans and cars.

MOBIL® MOBILGEAR® XMP Series Extra High Performance Industrial Gear Oils designed to provide optimum equipment protection and oil life even under extreme conditions. Recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. Based on high quality mineral base stocks and an advanced proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing but also a high level of resistance against micropitting fatigue. They also offer the potential for improved lubrication of gearbox rolling element bearings and outstanding rust and corrosion protection versus conventional gear oils, including seawater and acidic water protection. Offered in different ISO Grades they conform to different specifications and approvals.

MOBIL® Mobilgear™ SHC™ XMP  Synthetic Wind Turbine Gear Oils designed to provide optimum equipment protection of wind turbine gearboxes, including steel-on-steel spur, helical and bevel gears, operating under the extreme conditions typical of wind turbines. They contain an advanced and carefully blended proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing and a high level of resistance against micropitting fatigue. They offer outstanding rust and corrosion protection in applications where salt water and acidic water protection are required. Available in 2 ISO Grades, Mobilgear™ SHC™ XMP 320 and Mobilgear™ SHC™ XMP 460.

For additional information please consult the Product Description section and the supplied documentation.

MOBIL® also offers MOBILGEAR® SHC™ XMP  Synthetic Wind Turbine Gear Oils designed to provide optimum equipment protection of wind turbine gearboxes, including steel-on-steel spur, helical and bevel gears, operating under the extreme conditions typical of wind turbines. For more information please refer to our product presentation on EXXONMOBIL® MOBIL® Wind Turbine Lubricants.

AIRGO 3001 is a trademark of ZF Friedrichshafen AG. It is a high-performance gearbox oil designed for use in automatic transmissions with an outstanding oxidation and friction stability.

EXXONMOBIL® MOBIL Jet™ Oil II is a high performance aircraft-type gas turbine lubricant formulated with a combination of a highly stable synthetic base fluid and a unique chemical additive package. The combination provides outstanding thermal and oxidative stability to resist deterioration and deposit formation in both the liquid and vapour phases, as well as excellent resistance to foaming The effective operating range of Mobil Jet Oil II is between -40 ºC (-40 ºF) and 204 ºC (400 ºF). Mobil Jet Oil II is engineered for aircraft gas turbine engines used in commercial and military service requiring MIL-PRF-23699 level performance. It also is recommended for aircraft-type gas turbine engines in industrial or marine service applications. Approved to MIL-PRF-23699F Type STD, SAE-AS-5780 Grade SPC. 

Product Features:

Formulated to meet the demanding requirements of aircraft-type gas turbines operating over a wide range of severe operating conditions

High specific heat in order to ensure good heat transfer from oil-cooled engine parts

Exhibits excellent bulk oil stability at temperatures up to 204 °C (400 °F)

The evaporation rate at these temperatures is low enough to prevent excessive loss of volume

Applications:

Recommended for aircraft gas turbine engines of the turbo-jet, turbo-fan, turbo-prop, and turboshaft (helicopter) types in commercial and military service Also recommended for aircraft-type gas turbine engines used in industrial or marine applications

Approved against U.S. Military Specification MIL-PRF-23699

Compatible with other synthetic gas turbine lubricants meeting MIL-PRF-23699. However, mixing with other products is not recommended because the blend would result in some loss of the performance characteristics of MOBIL Jet™ Oil II.

Compatible with all metals used in gas turbine construction, as well as with F Rubber (Viton A), H Rubber (Buna N), and silicone seal materials.

SHELL® extensive range of industrial lubricants, including their GTL (gas-to-liquids) technology oils, highlight the difference between industry standards and industry-leading performance. 

SHELL® range of industrial lubricants include lubricating oils for a variety of applications, hydraulic oils, coolants and greases.

SHELL® lubricating oils can be used on turbines (TURBO turbine oils separately presented), rotary and reciprocating compressors (CORENA), stationary gas engines (MYSELLA), power-generation (ARGINA & GADINIA), transformers (DIALA), axle, gear and transmission systems (SPIRAX ), slideways (TONNA), as bearing & circulating oils (MORLINA), process oils (RISELLA X) as well as for worm drive gears (OMALA). TELLUS hydraulic oils, Coolants and GADUS greases are also offered as part of SHELL® range of industrial lubricants. They are briefly presented in the Product Description section while further information can be obtained through the supplied documentation.

The SWAGELOK® Company is a global supplier of a range of products including fittings, valves, hoses, regulators, medium- and high-pressure products, process instrumentation, quick-connects, measurement devices, tubing and tools, filters, sample cylinders, MPC modular systems, pre-engineered subsystems (PrESS), welding systems, leak detectors, lubricants, and sealants.

SWAGELOK® Goop™ thread lubricants reduce installation time by easing the assembly of leak-tight thread connections for a variety of metals and alloys. Oil-based BLUE Goop® thread lubricants can be used on stainless steel, steel, titanium, aluminum, and nickel based alloys for temperatures up to 400° F (204° C). Halcocarbon based PURE Goop® can be used on titanium, stainless steel, steel, and nickel based alloys for temperatures up to 350° F (176° C) while Oil-based SILVER Goop® thread lubricants can be used on stainless steel, and high temperature alloys for temperatures up to 1500° F (815° C). Offered in different packaging options: 1 oz. (29.5 cm3) tubes (PURE/SILVER Goop®), 2 oz. (59 cm3) tubes (BLUE Goop®) and 1 lb. (450 g) cans (BLUE/PURE/SILVER Goop®). According to the selected product, they resist or prevent galling. 

SWAGELOK® Snoop® liquid leak detectors detect gas leaks in hard-to reach areas. They are non-corrosive and non-flammable. Contain corrosion inhibitor for added protection. SWAGELOK® Snoop® liquid leak detectors can be used over a temperature range of 27° to 200° F (-2° to 93° C). For lower temperatures, –65°F (–54°C) SWAGELOK® Real Cool Snoop® liquid leak detectors can be used. Offered in different containers: 2 fl oz./59 ml (Snoop®), 8 fl oz./236 ml (Snoop®/Real Cool Snoop®) and 1 gal/3.8 l (Snoop®/Real Cool Snoop®).

SWAGELOK® also offers SWAK™, PTFE Tape, and PTFE-Free pipe thread sealants. For more information on SWAGELOK® products please refer to the supplied documentation. 

Turbine engine oils (abbreviated as TEOs), also known as jet oils, turbo oils are specialty lubricants designed to support the operation of turbine engines. Apart from their lubricating function of the engine,  gearbox, shafts and associated accessories, TEOs have two additional functions. Their various additives protect the components from corrosion, and filter contaminants in the engine such as carbon deposits (coking) while TEOs are also used as heat transfer fluids, cooling the engine in temperatures reaching 1000°C, in turn extending the life of the oil up to 25,000 hours of operation. TEOs have been initially developed as mineral and and subsequently innovated to synthetic.

Castrol™ 5000 is a 5 centistoke "Type II" synthetic lubricant designed for use in modern gas turbine engines operating at bulk oil temperatures exceeding those which "Type I" oils can successfully withstand. It  is a clear, amber-colored fluid having the appearance of a thin oil with a faint aromatic odor. It is based on a blend of high quality hindered esters and additives used to offer a product with excellent high temperature and oxidation stability, good load-carrying properties and complete compatibility with engine and accessory constructional materials, such as metals and elastomeric sealing compounds. 

Castrol™ 5000  is compatible with other MIL-PRF-23699F Std, 5 centistoke gas turbine lubricanrts such as AEROSHELL® 500, 560, EXXONMOBIL® Mobil Jet Oil II, EXXONMOBIL® Mobil Jet Oil 254, EASTMAN Turbo Oil 2380™ and others. However, it is unwise to mix grades of different viscosity.

Castrol™ 5000  oil  is not compatible with mineral oils and while it is miscible with phosphate ester hydraulic fluids, the latter will have a detrimental effect such as coking propensity and resistance to corrosion. 

For additional information and specifications please refer to the supplied documentation.

NYCO NYCOLUBE® family of high performance mineral and synthetic lubricants are used for different aeronautical, defence and industrial applications such as engines, helicopter gear boxes, power-drive units for aircraft engines, on-board aeronautical instruments, equipment anti-seize and assembly, LRU (Line Replaceable Units), CLP (Cleaners, Lubricants and Preservatives) for the maintenance of weapons, gear boxes, power reduction gearboxes, air compressors or high-temperature chain oils.

NYCOLUBE® 30 is a petroleum lubricating oil with a minimum viscosity of 11 cSt at 40°C. It is inhibited against corrosion and has water-displacing properties. Can be used as a general purpose preservative oil for military equipment, primarily to protect weapons of all calibers from rust during storage.

Different NYCOLUBE® series of products for the automotive and industrial sectors include:

NYCOLUBE® 200 series high performance 2-stroke engine oils

NYCOLUBE® 5500 series high flash point high temperature oven chain oils

NYCOLUBE® 5600 HT series very high-temperature oven chain oils

NYCOLUBE® 3000 series high performance compressor oils

Respective NYCOLUBE® solutions for the Defense sector include:

NYCOLUBE® 127 CLP product range

NYCOLUBE® 294 heavy duty multigrade 0W30 engine oil

For additional information please refer to the Product Description section and the supplied documentation.

EXXONMOBIL® AVIATION Mobil Jet Oil 254 is a third-generation oil formulated to deliver exceptional high-temperature thermal stability  (HTS), excellent resistance to coking and deposit control as well as exceptional oxidation and corrosion protection. It meets the demanding requirements of latest technology  aircraft-type gas turbines operating over a wide range of severe operating conditions.  When compared to a typical Type II lubricant, Mobil Jet Oil 254 reduces bulk oil oxidation by up to 50 percent and shows deposit control capability 50 F higher.  These properties have been confirmed in various laboratory tests including; the Corrosion-Oxidation Stability Test,  Alcor Deposition Test, Vapor Phase Coker, Erdco High-Temperature Bearing Test, Ryder Gear and the Mobil Thin Film Oxidation Test.The closely controlled low-temperature viscosity of Mobil Jet Oil 254, along with its low pour point (below -54 ºC), ensure good low-temperature fluidity to permit starting and lubrication at temperatures as low as -40 ºC.  In extensive laboratory testing and in-flight experience, Mobil Jet Oil 254 also exhibits excellent bulk oil stability at temperatures up to 232 ºC (450 ºF) for extended periods.  The evaporation rate at these temperatures is low enough to prevent excessive loss of volume.  The load-carrying ability of Mobil Jet Oil 254 comes from its synthetic base stock viscosity and, therefore, is not subject to loss from viscosity index additive shear.  

Product Features & Benefits:

Excellent thermal and oxidation stability reducing the formation of carbon (carbon coking) and sludge deposits. Helps operators reduce shop visits and maintenance costs. Maintains engine efficiency and extends engine life. Reduces bulk oil oxidation by 50% and increases deposit control by 50 ºF

Excellent wear and corrosion protection extending seal, gear and bearing life. Reduces engine maintenance. 

Viscosity and shear stability across wide temperature range providing effective lubrication at high operating temperatures

Chemically stable at high operating temperatures reducing evaporation losses and lowering oil consumption

Excellent resistance to foaming maintaining film strength under rigorous operating conditions

Good low temperature fluidity permiting start-up and ensuring effective lubrication of critical components at temperatures as low as -40 °F.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA AVIATION HYDRAULIC FLUIDS & PRESERVATIVES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA engine oils and greases please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

PHILLIPS 66® Company is among the largest refiners in the U.S, a major contract jet and avgas fuel supplier to private, commercial, and military aviation and a producer of industrial oils. The Phillips 66® line of aviation lubricants approved by the FAA and leading engine manufacturers includes premium single and multiviscosity piston engine oils and  highest quality hydraulic fluids compatible with other brands. They can be used in diverse climatic conditions. PHILLIPS 66® protective additive packages exceed industry specifications.

Some of PHILLIPS 66® aviation lubricants listed below are offered through our Web Platform for Supplies. Others, not currently listed, can also be furnished through our network of co-operating suppliers. For more information please refer to the Product Description section, the supplied documentation or contact us.

PHILLIPS 66® Aviation & Industrial Oils

PHILLIPS 66® X/C® Aviation Oil, Ashless Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines

PHILLIPS 66® VICTORY® Aviation Oils

VICTORY® Aviation Oil 100AW, Ashless Dispersant, Single-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)

VICTORY® Aviation Oil AW 20W-50, Ashless Dispersant, Multi-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)

VICTORY® DIESEL Aviation Oil 10W-40, Fully Synthetic Aviation Engine Oil for Aircraft Compression Ignition Engines

PHILLIPS 66® TYPE A Aviation Oil, Ashless Dispersant, Single-Grade Engine Oil for Aircraft Piston Engines. Available in two grades, 100AD (SAE 50) and 120AD (SAE 60)

PHILLIPS 66® TYPE M Aviation Oil, Non-Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines

PHILLIPS 66® Reference Oil 50

PHILLIPS 66® Food Grade White Mineral Oil for use in food processing plants, consumer products, and in other applications.