
- AVIATIONEU NEW ERA
- OFFERS/PROMOTIONS
-
METALS, FASTENERS & TOOLS
-
AIRCRAFT, UAV & MODELING
-
PROPULSION SYSTEMS & PARTS
- AVIONICS, INSTRUMENTS & SAFETY DEVICES
-
OTHER AVIATION & INDUSTRIAL SUPPLIES
- Lubricants & Chemicals
- Tires, Wheels & Brakes
- Automotive & Motion Control Products & Parts
- Fuel, Oil, Hydraulic & Pneumatic Systems & Parts
- Safety & Environmental Protection Equipment & Systems
- Composites, Foams & Other Materials & Products
- Test & Measurement Products & Systems
- Electronic, Electrical & Electromechanical Materials & Parts
- Marine Products & Related Supplies
- Office Supplies, Gifts & Advertising Materials

GILL Dry Charge (Flooded) Lead Acid Aircraft Batteries SKU: GILL-BAT-ACFT-DRYCHRG
Gill has become the OEM "original equipment battery" for Raytheon, Cessna, LearJet, Mooney, Piper, Ayres, Airtractor, Maule, Scheizer and other commercial, private and military aircraft in the aviation industry and continues to be the industry's choice for quality battery products. In addition to the traditional Dry Battery line, Gill offers the LT Battery Sealed products featuring improved shelf life, lower weight, dependability, durability, high reliability, improved energy density, robust construction, testing and approval to DO-160E as well as FAA/PMA approval.
Gill Dry Batteries, like other dry batteries, are considered as Non Dangerous Goods and only need to be packaged to avoid short circuits during transportation. They can be shipped as ordinary goods during sea and air transportation.
Data sheet
- Certification/Approval
- FAA Parts Manufacturer Approval (PMA)
- Taric
- 8536200000 Automatic circuit breakers for protecting electrical circuits
- Unit of Measurement (UOM) / Sale
- Each (ea.)
Specific References
Download
GILL BATTERIES Eligibility List
GILL Batteries Aircraft Installation Eligibility List
Download (127.28KB)20 other products in the same category
SENSATA TECHNOLOGIES...
The KLIXON® 7277 series circuit breakers are the commercial grade version of the 7274 series circuit breakers which are small, lightweight, low amperage devices that are specifically designed to protect aircraft/aerospace cable and components in airborne vehicles and equipment. The KLIXON® 7277 series circuit breakers are physically and electrically identical to the 7274-2 military grade circuit breakers, with the exception that the 7277 series has wider calibration limits. Klixon® 7277 series breakers have been designed for applications that do not require the tighter performance characteristics and approvals of 7277-2 series military circuit breakers.
Originally developed as an alternative to slow blow fuses, the trip–free 7277 series breakers are used extensively as primary electrical circuit protection on general aviation aircraft. The wider calibration limits of the 7277 has also resulted in applications including protection for data processing and telecommunications equipment, computers, flight simulators, construction, material handling and other industrial,electronic equipment. Suitable for use on trainer / simulator applications where all breakers are operated on low ampere control current, different ampere rating inserts (amp ratings on top of push button) can be ordered.
KLIXON® 7277 series circuit breakers' features include:
• Miniature size
• Light weight
• Trip–free design
• Current rating: 0.5 to 20 amps
• High vibration resistance
• Options include: dust boot (part #14500-1 fits 15/32 bushing, part #14500-5 fits 7/16 bushing), auxiliary switch, terminal hardware, longer push button.
For additional information please consult the supplied documentation.
EMAS MA Series Toggle...
EMAS MA Series toggle switches feature maximum product reliability with V0 material and are offered in different contact and badge options.
NOTE: This product is no longer available. Limited quantities may be offered from existing stocks of different vendors.
EMERSON WHITE RODGERS...
Master Relay (Battery Solenoid) for all homebuilts (not suitable for certified aircraft). Continuous duty. Offered for 12V and 24V systems.
MS25089 Series P1 Momentary...
The P1 momentary switch is a sealed, dustproof, snap action, MIL qualified switch ideal for switching low level up to 10 amps. It features screw terminals, and includes screws, lockwashers, and solder lugs.
Product Features:
MIL qualified
Dustproof, snap action, screw terminals, rugged reliable construction
Threaded or Press Fit Bezel with Black, Red or White Color Button (depending on selected model)
Button sealed with patented “rolling sleeve” principle
Contact area sealed at button & terminals
Less than 25mOhm contact resistance
Ideal for low level switching as well as up to 10 amp duty
Positive tactile feedback
Product Specifications:
Electrical: (at 28VDC or 115VAC, 60/400 Hz.)
Load / Amperes / Life (Normal)
Resistive / 10 / 25,000 cycles
Inductive/Motor / 5 / 25,000 cycles
Lamp / 5 / 25,000 cycles
START PAC® Aircraft Ground...
START PAC® manufactures an extensive range of portable & mobile aircraft Ground Power Units (aka GPU) & starting battery packs used in different applications and operational scenarios, from supply of reliable mobile ground power for remote airstrips through to powerful hybrid solutions for fully high throughput Aircraft Maintenance, Repair & Overhaul operations. START PAC®’s product range includes GPU providing clean power for both maintenance and engine starting aircraft on the ground, a range of of starting units with high power batteries and over voltage protection relays capable of starting any type of electrically started engine, power supply units to power up your aircraft’s cockpit whenever there is a need to operate any onboard device on the ground and check avionics as well as related accessories. Power supply units plug to the wall AC socket and provide continuous, clean, no duty cycle DC power.
RAY ALLEN (RAC) R2S Rocker...
RAY ALLEN (RAC) R2S Rocker Switch provides a very positive snap action in 2 directions and returns to a center off position. It was designed specifically for Ray Allen trim systems. It is wired to connect both power leads to ground when the rocker is released. This eliminates motor coasting and allows very precise trimming. The RS2 switch is rated at 1amp. The faceplate measures 1.75" (44mm) x 1.0" (25mm) x 1.47" (37mm) deep. Self adhesive labels are not included. Sold separately.
SENSATA TECHNOLOGIES...
The KLIXON® PS series 2 to 35 Amp precision thermal circuit breakers by SENSATA TECHNOLOGIES Inc. (formerly Texas Instruments Sensors & Controls) are designed to interrupt short circuits or overloads and combines trip-free protection with fast response time. They feature a bi-metallic snap-acting disc as the sensing element and they are widely used in production and military aircraft where precise ultimate trip characteristics are required. Models PSM and PSM-N are available in the following ampere ratings 2, 3, 5, 10, 15, 20, 25, 35. When ordering specify if neck-mounting style is wanted by placing “N” after ampere rating. Example: PSM-10N
The KLIXON® PDL series thermal breakers are designed to meet the harshest environmental requirements. They are weatherproof for protection against moisture, dust, grease, fuel vapors, and other harsh environments. For weatherproof circuit breakers in ratings from 50 to 150 amperes, order Model PDLM.
TEXTRON CESSNA Split Master...
Versatile split red master switch used in virtually all single engine Cessna models since 1970. It can be used in most light aircraft with single alternator systems. Left rocker normally is used for alternator and right half for battery. Amp Rating: 20. The swich housing mount (P/N: S1843-1) is sold separately and can only be ordered together with the switch.
BRP-ROTAX® Aircraft Engine...
ROTAX® aircraft engines form part of the product portfolio of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.
BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.
Different starter relay assemblies are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).
Aircraft engine parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.
Push Button SPST Switch w....
Fine quality switch from ACS used in many aircraft. The switch housing is machined from billet aluminum which makes this switch 25% lighter. It provides “ON” and “OFF” electrical control of both magnetos on a single engine aircraft. The key-operated switch mounts from the rear of the panel in a 7/8” dia hole. Available with or without starter position. A-510-2 model with starter position is supplied with switch plate two keys. (diode included). FAA PMA Approved. Made in USA.
B&C SPECIALITY PRODUCTS...
BC207 High/Low Voltage Warning Indicator by B&C SPECIALITY PRODUCTS is a solid-state device which provides a visual indication of abnormal bus voltage via a panel-mounted warning light (included). It is intended for use in non certified aircraft. Not FAA Approved. When flashing,the warning light indicates a bus voltage greater than 15.5 volts D.C. When steady, it indicates a bus voltage below 12.5 volts D.C. The product also includes B&C S708-2 Miniature Push-Button switch (push-to-test). The BC207 Voltage Warning Indicator can be used in both 14v and 28v electrical systems.
TE POTTER & BRUMFIELD W31...
Bi-metallic single toggle thermal circuit breakers suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. 0.5 amp to 50 amp ratings may be used as on/off switch. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).
Product Features:
Lightweight, less than 2 oz.
0.5 amp to 50 amp ratings may be used as on/off switch.
Cannot be reset against overload.
Screw termination.
Trip-free operation.
KNITTER-SWITCH Professional...
KNITTER-SWITCH & CO.KG (KNITTER-SWITCH) manufactures a wide range of professional switches including toggle, pushbutton, tact, slide, dual-in-line, rotary coded, rotary, encoders and snap action switches.
KNITTER switches are available in different versions (configurations), Standard with silver or silver-plated contacts and terminals, Configuration B with gold-plated (over Nickel) contacts and terminals and Configuration G with gold-plated (over silver) contacts and terminals. All switches are sealed on the terminal side and meet CE regulations. Switches for SMT as well as most series for PCB mounting are generally fully washable.
Some KNITTER switches are ESD-resistant and have an approved IP 67 waterproof rating.
KNITTER range of toggle switches includes miniature, subminiature and microminiature toggle switches offered in different series and types. Depending on the selected series and type there are offered in one or multiple poles and switching functions.
For additional information please consult the supplied documentation.
HARTZELL ENGINE...
SKY-TEC, a HARTZELL ENGINE TECHNOLOGIES brand, includes starters and support for Prestolite, Electrosystems, Lamar and Kelly designs. SKY-TEC OEM contactors are today installed in many general aviation aircraft while SKY-TEC FAA-PMA contractors can be used for starter, battery master/auxiliary or auxiliary power applications in replacement of OEM parts.
SKY-TEC STS-S Series FAA-PMA certified aircraft starter solenoids (aka relays) are intermittent duty suitable for starter applications. They are available in 12V (STS-S12) or 24V (STS-S24) versions. Activation: +V to S-Terminal (Frame is grounded by mounting).
SKY-TEC STS-M Series FAA-PMA approved Battery/Master solenoids are continuous duty solenoids intended for use in battery master/auxiliary applications in certified aircraft. They are available in 12V (STS-M12) or 24V (STS-M24) versions. Activation: -(Ground) to S-Terminal. (Floating ground frame).
SKY-TEC STS-A Series FAA-PMA approved solenoids are continuous duty and typically used for connecting auxiliary (ground) power. They are available in 12V (STS-A12) or 24V (STS-A24) versions. Activation: varies.
Product Features:
FAA-PMA Certified
All-metal case construction
Silver contacts (vs. copper) for high-current capability and long-life. They provide 300A in-rush capability. Much higher than the original units.
Strong spring and high-current coil for quick contact opening - minimizing arcing
Single coil terminal (other end connected to case)
High quality manufacturing
Upgraded to perform best with today's lightweight, high torque starters
Same OE terminal layout simple to install
For additional information on different SKY-TEC series of slenoids and their applications in different aircraft please refer to the respective product presentations.
TE POTTER & BRUMFIELD W58...
Bi-metallic push to reset only thermal circuit breakers suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. 0.5 amp to 30 amp ratings. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).
Product Features:
Push To Reset Only
0.5 amp to 30 amp ratings.
Cannot be manually tripped.
Button extends for visual trip indication.
Push button to reset breaker.
90 Degree Screw-On Terminals
TCM/BENDIX FAA-PMA Approved...
FAA-PMA Approved original equipment TCM Bendix magneto ignition switches with 3 positions (Right/Left/Both Mags). They come complete with two keys and faceplate. For dual ignition aircraft systems, ignition switch grounds both magneto P-leads in off position.
BRP-ROTAX® Aircraft Engine...
ROTAX® aircraft engines form part of the product portfolio of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.
BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.
Different alternators are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).
Aircraft engine parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.
SENSATA TECHNOLOGIES...
The KLIXON® 7270/7271 series circuit breakers were designed to utilize less behind panel space while protecting wire and cable in aircraft and ground support equipment on either 120 VAC, 400 Hz or 30 VDC systems.
These circuit breakers are available with neck mounting (7270-1 and 7271-8) or standard cover plate (7270-7 and 7271-3). In each of these KLIXON® circuit breakers, the bi-metallic element assures uniform current distribution throughout its responsive area. This design reduces current density at the critical areas, resulting in an element having a much higher interrupting capability than conventional design. Inherently resistant to shock and vibration, the KLIXON® disc element is capable of precise calibration settings and will retain the initial calibration within close tolerances throughout the service life of the breaker. Both circuit breakers have conventional actuator action; i.e., the toggle actuator on the 7270 moves to the OFF position for trip indication and the button the 7271 pops out. A standard black button with a white collar is used. For additional information please refer to the attached documentation.

Gill has become the OEM "original equipment battery" for Raytheon, Cessna, LearJet, Mooney, Piper, Ayres, Airtractor, Maule, Scheizer and other commercial, private and military aircraft in the aviation industry and continues to be the industry's choice for quality battery products. In addition to the traditional Dry Battery line, Gill offers the LT Battery Sealed products featuring improved shelf life, lower weight, dependability, durability, high reliability, improved energy density, robust construction, testing and approval to DO-160E as well as FAA/PMA approval.
Gill Dry Batteries, like other dry batteries, are considered as Non Dangerous Goods and only need to be packaged to avoid short circuits during transportation. They can be shipped as ordinary goods during sea and air transportation.