Fine quality switch from ACS used in many aircraft. The switch housing is machined from billet aluminum which makes this switch 25% lighter. It provides “ON” and “OFF” electrical control of both magnetos on a single engine aircraft. The key-operated switch mounts from the rear of the panel in a 7/8” dia hole. Available with or without starter position. A-510-2 model with starter position is supplied with switch plate two keys. (diode included). FAA PMA Approved. Made in USA.

Electrodelta (Hartzell Engine Technologies) is the world market leader in top quality voltage regulators for general aviation aircraft, and continues to revolutionize the industry with proven technologies and improvements. The units are assembled from the highest quality electronic components available and are meticulously tested and calibrated to ensure maximum performance.The Electrodelta product line was acquired by by Lamar Technologies LLC in order to add new and alternative  parts to the company's product lines.

High quality vinyl toggle switch covers that do not have a nipple at the end of the cover. Suitable for MS35058 series switches. Available in different colors.

KNITTER-SWITCH & CO.KG (KNITTER-SWITCH) manufactures  a wide range of professional switches including toggle,  pushbutton, tact, slide, dual-in-line, rotary coded, rotary, encoders and snap action switches.

KNITTER switches are available in different versions (configurations), Standard with silver or silver-plated contacts and terminals, Configuration B with gold-plated (over Nickel) contacts and terminals and Configuration G with gold-plated (over silver) contacts and terminals. All switches are sealed on the terminal side and meet CE regulations. Switches for SMT as well as most series for PCB mounting are generally fully washable.

Some KNITTER switches are ESD-resistant and have an approved IP 67 waterproof rating.

KNITTER range of toggle switches includes miniature, subminiature and microminiature toggle switches offered in different series and types. Depending on the selected series and type there are offered in one or multiple poles and switching functions.

 For additional information please consult the supplied documentation.

Master Relay (Battery Solenoid) for all homebuilts (not suitable for certified aircraft). Continuous duty. Offered for 12V and 24V systems.

RAY ALLEN (RAC) R2S Rocker Switch provides a very positive snap action in 2 directions and returns to a center off position. It was designed specifically for Ray Allen trim systems. It is wired to connect both power leads to ground when the rocker is released. This eliminates motor coasting and allows very precise trimming. The RS2 switch is rated at 1amp. The faceplate measures 1.75" (44mm) x 1.0" (25mm) x 1.47" (37mm) deep. Self adhesive labels are not included. Sold separately.

Military Specification MS35058 Series Toggle Switches can be used to upgrade your aircraft's cockpit controls. These heavy-duty metal switches have a standard shape that works well for a variety of applications can be used for most components that only function in either the on or off positions. They are available in several sizes to fit your particular airplane and are shipped with all necessary rings and hardware for installation. Toggle switches are available with two or three operating positions, 1 or 3 hole mounting and a variety of circuitry & electrical ratings. Contacts are made of solid silver. Wide usage is found in aircraft, mobile, marine, electronic and industrial applications. Available in full "AN" standard size & Ultra Miniature 1/2" size, contact types and circuit codes (see reference chart).

Aviation grade ELECTRODELTA X61 series solenoids by LAMAR TECHNOLOGIES LLC are offered in continuous  or intermitant duty in 12 or 24 Volt. They fit current GA production aircraft as well as legacy aircraft and replace both single terminal switched units, as well as the current double terminal switched units in production today. All units have multiple quality and functional tests prior to certification and delivery. Non FAA-PMA Approved.

Product Features:

Replace most contactors in general aviation

Available in 12 or 24 Volt

Available for Continuous or Intermittent duty

All units inspected and tested to performance standards

Warranty 24 months

Versatile split red master switch used in virtually all single engine Cessna models since 1970. It can be used in most light aircraft with single alternator systems. Left rocker normally is used for alternator and right half for battery. Amp Rating: 20. The swich housing mount (P/N: S1843-1) is sold separately and can only be ordered together with the switch.

ELECTRODELTA is the world market leader in top quality voltage regulators for general aviation aircraft, and continues to revolutionize the industry with proven technologies and improvements. The units are assembled from the highest quality electronic components available and are meticulously tested and calibrated to ensure maximum performance. The ELECTRODELTA product line was acquired in October 2012 by LAMAR TECHNOLOGIES LLC. 

ELECTRODELTA VR Series voltage regulators are offered in 14 and 28 Volt models with FAA/PMA or TSO certifications and are suitable as replacements for use in aircrafts of different manufacturers.

FAA-PMA Approved original equipment TCM Bendix magneto ignition switches  with 3 positions (Right/Left/Both Mags). They come complete with two keys and faceplate. For dual ignition aircraft systems, ignition switch grounds both magneto P-leads in off position.

YAESU rechargable batteries are intended for use with YAESU handheld transceivers.

BC207 High/Low Voltage Warning Indicator by B&C SPECIALITY PRODUCTS  is a solid-state device which provides a visual indication of abnormal bus voltage via a panel-mounted warning light (included). It is intended for use in non certified aircraft. Not FAA Approved. When flashing,the warning light indicates a bus voltage greater than 15.5 volts D.C. When steady, it indicates a bus voltage below 12.5 volts D.C. The product also includes B&C S708-2 Miniature Push-Button switch (push-to-test). The BC207  Voltage Warning Indicator can be used in both 14v and 28v electrical systems. 

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different starter relay assemblies are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

The P1 momentary switch is a sealed, dustproof, snap action, MIL qualified switch ideal for switching low level up to 10 amps. It features screw terminals, and includes screws, lockwashers, and solder lugs.

Product Features:

MIL qualified 

Dustproof, snap action, screw terminals, rugged reliable construction

Threaded or Press Fit Bezel with Black, Red or White Color Button (depending on selected model)

Button sealed with patented “rolling sleeve” principle

Contact area sealed at button & terminals

Less than 25mOhm contact resistance

Ideal for low level switching as well as up to 10 amp duty

Positive tactile feedback

Product Specifications:

Electrical: (at 28VDC or 115VAC, 60/400 Hz.)

Load / Amperes / Life (Normal)

Resistive / 10 / 25,000 cycles

Inductive/Motor / 5 / 25,000 cycles

Lamp / 5 / 25,000 cycles

Slick magnetos by CHAMPION AEROSPACE are used on nearly all aircraft piston engines. They exhibit distinct design and operational features outlined below ensuring improved performance and service life.

Smaller and lighter unique design

Radio noise suppression

Lift-off housing

Easy to maintain

OEM Approved for more than 225,000 aviation engines

Service at 500-hour intervals (*)

CHAMPION AEROSPACE Slick magnetos are offered in NEW or FACTORY OVERHAULED condition (**) in a broad range of options. Both can be supplied as exchange units to returned cores and include genuine OEM parts produced and inspected under rigorous procedures to ensure airworthiness and suitability in Slick magnetos. The factory overhauled magnetos are sourced by CHAMPION AEROSPACE authorized overhauling stations and adhere to strict CHAMPION AEROSPACE restrictions on the use of parts and service literature.

For additional information please refer to the Product Description section and the supplied documentation.

(*) In accordance with CHAMPION AEROSPACE Overhaul Manual L-1363F, the magneto should be overhauled at TBO, lightning strike, prop strike, sudden stoppage of the engine and immersion of the aircraft.

(**) NEW EXCHANGE or FACTORY OVERHAULED EXCHAGE Slick magnetos are offered in exchange of an existing customer owned unit (core) for a quick turn around. A refundable core charge is included in the selling price. This is refunded or credited towards future orders with us when a qualified core is returned and its condition is approved by our co-operating supplier within 60 days of the date of the purchase invoice. As a general rule, approvals of core returns for FACTORY OVERHAULED Slick magnetos are granted to cores of the current series of these magnetos while for NEW EXCHANGE Slick Magnetos, cores of older series of Slick magnetos can be considered for credit on a case by case basis. In all cases, the approval of a returned core remains at the exclusive discretion of our co-operating supplier and shipping back to the customer of non-approved cores are subject to additional charges.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different alternators are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

The KLIXON® 7270/7271 series circuit breakers were designed to utilize less behind panel space while protecting wire and cable in aircraft and ground support equipment on either 120 VAC, 400 Hz or 30 VDC systems.

These circuit breakers are available with neck mounting (7270-1 and 7271-8) or standard cover plate (7270-7 and 7271-3). In each of these KLIXON® circuit breakers, the bi-metallic element assures uniform current distribution throughout its responsive area. This design reduces current density at the critical areas, resulting in an element having a much higher interrupting capability than conventional design. Inherently resistant to shock and vibration, the KLIXON® disc element is capable of precise calibration settings and will retain the initial calibration within close tolerances throughout the service life of the breaker. Both circuit breakers have conventional actuator action; i.e., the toggle actuator on the 7270 moves to the OFF position for trip indication and the button the 7271 pops out. A standard black button with a white collar is used. For additional information please refer to the attached documentation.