ELECTRODELTA is the world market leader in top quality voltage regulators for general aviation aircraft, and continues to revolutionize the industry with proven technologies and improvements. The units are assembled from the highest quality electronic components available and are meticulously tested and calibrated to ensure maximum performance. The ELECTRODELTA product line was acquired in October 2012 by LAMAR TECHNOLOGIES LLC. 

ELECTRODELTA VR Series voltage regulators are offered in 14 and 28 Volt models with FAA/PMA or TSO certifications and are suitable as replacements for use in aircrafts of different manufacturers.

Bi-metallic push to reset only thermal circuit breakers suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. 0.5 amp to 30 amp ratings. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).

Product Features:

Push To Reset Only

0.5 amp to 30 amp ratings.

Cannot be manually tripped.

Button extends for visual trip indication.

Push button to reset breaker.

90 Degree Screw-On Terminals

FINDER 66 Series 30 A Power relays are electromagnetic devices available in DPDT (66.22/66.82) and DPST-NO versions (66.22-x300/66.82-x300) & different variants.

Product Features:

• Reinforced insulation between coil and contacts according to EN 60335-1

• 8 mm creepage and clearance distances

• AC coils & DC coils

• Cadmium Free option available

• ATEX compliant (EX nC) options available

Double Pole Double Throw (DPDT) Changeover (66.22 and 66.82). Commonly used to separate two circuits electrically and connect them magnetically. They are often used to interface an electronic circuit, which works at a low voltage to an electrical circuit which works at a high voltage. 

66.22 type with 30 A rated contacts, PCB mount and bifurcated terminals

66.82 type with 30 A rated contacts, Flange mount and Faston 250 connections 

Double Pole Single Throw Normally Open (DPST-NO) (66.22-x300 and 66.82-x300). Equivalent of 2 SPST switches (NO Normally Open and NC Normaly Closed) and can be used to switch 2 different loads.

66.22-x300 type with 30 A rated contacts, PCB mount and bifurcated terminals

66.82-x300  type with 30 A rated contacts, Flange mount and Faston 250 connections 

Military Specification MS35059 Series Toggle Switches can be used to upgrade your aircraft's cockpit controls. These heavy-duty metal switches have a standard shape that works well for a variety of applications can be used for most components that only function in either the on or off positions. They are available in several sizes to fit your particular airplane and are shipped with all necessary rings and hardware for installation. Toggle switches are available with two or three operating positions, 1 or 3 hole mounting and a variety of circuitry & electrical ratings. Contacts are made of solid silver. Wide usage is found in aircraft, mobile, marine, electronic and industrial applications. Available in full "AN" standard size & Ultra Miniature 1/2" size, contact types and circuit codes (see reference chart).

Gill has become the OEM "original equipment battery" for Raytheon, Cessna, LearJet, Mooney, Piper, Ayres, Airtractor, Maule, Scheizer and other commercial, private and military aircraft  in the aviation industry and continues to be the industry's choice for quality battery products. In addition to the traditional Dry Battery line, Gill offers the LT Battery Sealed products featuring improved shelf life, lower weight, dependability, durability, high reliability, improved energy density, robust construction, testing and approval to DO-160E as well as FAA/PMA approval.

Gill  Dry Batteries, like other dry batteries, are considered as Non Dangerous Goods  and only need to be packaged to avoid short circuits during transportation. They can be shipped as ordinary goods during sea and air transportation.

Slick magnetos by CHAMPION AEROSPACE are used on nearly all aircraft piston engines. They exhibit distinct design and operational features outlined below ensuring improved performance and service life.

Smaller and lighter unique design

Radio noise suppression

Lift-off housing

Easy to maintain

OEM Approved for more than 225,000 aviation engines

Service at 500-hour intervals (*)

CHAMPION AEROSPACE Slick magnetos are offered in NEW or FACTORY OVERHAULED condition (**) in a broad range of options. Both can be supplied as exchange units to returned cores and include genuine OEM parts produced and inspected under rigorous procedures to ensure airworthiness and suitability in Slick magnetos. The factory overhauled magnetos are sourced by CHAMPION AEROSPACE authorized overhauling stations and adhere to strict CHAMPION AEROSPACE restrictions on the use of parts and service literature.

For additional information please refer to the Product Description section and the supplied documentation.

(*) In accordance with CHAMPION AEROSPACE Overhaul Manual L-1363F, the magneto should be overhauled at TBO, lightning strike, prop strike, sudden stoppage of the engine and immersion of the aircraft.

(**) NEW EXCHANGE or FACTORY OVERHAULED EXCHAGE Slick magnetos are offered in exchange of an existing customer owned unit (core) for a quick turn around. A refundable core charge is included in the selling price. This is refunded or credited towards future orders with us when a qualified core is returned and its condition is approved by our co-operating supplier within 60 days of the date of the purchase invoice. As a general rule, approvals of core returns for FACTORY OVERHAULED Slick magnetos are granted to cores of the current series of these magnetos while for NEW EXCHANGE Slick Magnetos, cores of older series of Slick magnetos can be considered for credit on a case by case basis. In all cases, the approval of a returned core remains at the exclusive discretion of our co-operating supplier and shipping back to the customer of non-approved cores are subject to additional charges.

YAESU rechargable batteries are intended for use with YAESU handheld transceivers.

Fine quality switch from ACS used in many aircraft. The switch housing is machined from billet aluminum which makes this switch 25% lighter. It provides “ON” and “OFF” electrical control of both magnetos on a single engine aircraft. The key-operated switch mounts from the rear of the panel in a 7/8” dia hole. Available with or without starter position. A-510-2 model with starter position is supplied with switch plate two keys. (diode included). FAA PMA Approved. Made in USA.

Versatile split red master switch used in virtually all single engine Cessna models since 1970. It can be used in most light aircraft with single alternator systems. Left rocker normally is used for alternator and right half for battery. Amp Rating: 20. The swich housing mount (P/N: S1843-1) is sold separately and can only be ordered together with the switch.

RAY ALLEN (RAC) R2S Rocker Switch provides a very positive snap action in 2 directions and returns to a center off position. It was designed specifically for Ray Allen trim systems. It is wired to connect both power leads to ground when the rocker is released. This eliminates motor coasting and allows very precise trimming. The RS2 switch is rated at 1amp. The faceplate measures 1.75" (44mm) x 1.0" (25mm) x 1.47" (37mm) deep. Self adhesive labels are not included. Sold separately.

The KLIXON® 7277 series circuit breakers are the commercial grade version of the 7274 series circuit breakers  which are small, lightweight, low amperage devices that are specifically designed to protect aircraft/aerospace cable and components in airborne vehicles and equipment. The KLIXON® 7277 series circuit breakers are physically and electrically identical to the 7274-2 military grade circuit breakers, with the exception that the 7277 series has wider calibration limits.  Klixon® 7277 series breakers have been designed for applications that do not require the tighter performance characteristics and approvals of 7277-2 series military circuit breakers. 

Originally developed as an alternative to slow blow fuses, the trip–free 7277 series breakers are used extensively as primary electrical circuit protection on general aviation aircraft. The wider calibration limits of the 7277 has also resulted in applications including protection for data processing and telecommunications equipment, computers, flight simulators, construction, material handling and other industrial,electronic equipment. Suitable for use on trainer / simulator applications where all breakers are operated on low ampere control current, different ampere rating inserts (amp ratings on top of push button) can be ordered.

KLIXON® 7277 series circuit breakers' features include:

• Miniature size

• Light weight

• Trip–free design

• Current rating: 0.5 to 20 amps

• High vibration resistance

• Options include: dust boot (part #14500-1 fits 15/32 bushing, part #14500-5 fits 7/16 bushing), auxiliary switch, terminal hardware, longer push button.

For additional information please consult the supplied documentation.

The KLIXON® PS series 2 to 35 Amp precision thermal circuit breakers by SENSATA TECHNOLOGIES Inc. (formerly Texas Instruments Sensors & Controls) are designed to interrupt short circuits or overloads and combines trip-free protection with fast response time. They feature a bi-metallic snap-acting disc as the sensing element and they are widely used in production and military aircraft where precise ultimate trip characteristics are required. Models PSM and PSM-N are available in the following ampere ratings 2, 3, 5, 10, 15, 20, 25, 35. When ordering specify if neck-mounting style is wanted by placing “N” after ampere rating. Example: PSM-10N

The KLIXON® PDL series thermal breakers are designed to meet the harshest environmental requirements. They are weatherproof for protection against moisture, dust, grease, fuel vapors, and other harsh environments. For weatherproof circuit breakers in ratings from 50 to 150 amperes, order Model PDLM. 

The KLIXON® 7270/7271 series circuit breakers were designed to utilize less behind panel space while protecting wire and cable in aircraft and ground support equipment on either 120 VAC, 400 Hz or 30 VDC systems.

These circuit breakers are available with neck mounting (7270-1 and 7271-8) or standard cover plate (7270-7 and 7271-3). In each of these KLIXON® circuit breakers, the bi-metallic element assures uniform current distribution throughout its responsive area. This design reduces current density at the critical areas, resulting in an element having a much higher interrupting capability than conventional design. Inherently resistant to shock and vibration, the KLIXON® disc element is capable of precise calibration settings and will retain the initial calibration within close tolerances throughout the service life of the breaker. Both circuit breakers have conventional actuator action; i.e., the toggle actuator on the 7270 moves to the OFF position for trip indication and the button the 7271 pops out. A standard black button with a white collar is used. For additional information please refer to the attached documentation.

Fine quality switch from ACS used in many aircraft. The switch housing is machined from billet aluminum which makes this switch 25% lighter. It provides “ON” and “OFF” electrical control of both magnetos on a single engine aircraft. The key-operated switch mounts from the rear of the panel in a 7/8” dia hole. Available with or without starter position. A-510-2 model with starter position is supplied with switch plate two keys. (diode included). FAA PMA Approved. Made in USA.

KNITTER-SWITCH & CO.KG (KNITTER-SWITCH) manufactures  a wide range of professional switches including toggle,  pushbutton, tact, slide, dual-in-line, rotary coded, rotary, encoders and snap action switches.

KNITTER switches are available in different versions (configurations), Standard with silver or silver-plated contacts and terminals, Configuration B with gold-plated (over Nickel) contacts and terminals and Configuration G with gold-plated (over silver) contacts and terminals. All switches are sealed on the terminal side and meet CE regulations. Switches for SMT as well as most series for PCB mounting are generally fully washable.

Some KNITTER switches are ESD-resistant and have an approved IP 67 waterproof rating.

KNITTER range of toggle switches includes miniature, subminiature and microminiature toggle switches offered in different series and types. Depending on the selected series and type there are offered in one or multiple poles and switching functions.

 For additional information please consult the supplied documentation.

EMAS MA Series toggle switches feature maximum product reliability with V0 material and are offered in different contact and badge options. 

NOTE: This product is no longer available. Limited quantities may be offered from existing stocks of different vendors.

Master Relay (Battery Solenoid) for all homebuilts (not suitable for certified aircraft). Continuous duty. Offered for 12V and 24V systems.

Bi-metallic single toggle thermal circuit breakers suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. 0.5 amp to 50 amp ratings may be used as on/off switch. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).

Product Features:

Lightweight, less than 2 oz.

0.5 amp to 50 amp ratings may be used as on/off switch.

Cannot be reset against overload.

Screw termination.

Trip-free operation.