The R.A. MILLER (RAMI) TSO'd AV-74 (.425 Stud Length) & the AV-74-1 (.800 Stud Length) are broadband blade type antennas for transponders or DME applications. The antenna housing is constructed of an acrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antennas are supplied with cellular neoprene mounting pad and hardware. Designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. They have a drag force of 0.09 lbs @ 250 mph. These antennas are direct replacements for the CI-105 antennas.

Product Specifications:

Application: Transponder/DME

Frequency: 960 - 1220 MHz

Impedance: 50 Ohms Nominal

VSWR: 1.5:1 Maximum

Polarization: Vertical

Pattern: Omni-Directional

Connector: "BNC" Female

Max Height: 3.4"

RF Power Capacity: 2.5 kW Peak

FAA TSO: C66c, C74c

The STRATOMASTER VEGA range instruments/indicators from MGL AVIONICS includes different 2 1/4" (57mm) microprocessor based color display instruments operating over a wide supply voltage range of 8 to 30V DC with with built in reverse and over voltage protection. They are non certified and only suitable for installation in experimental and sport  (LSA) aircraft. Using a high resolution color graphics display, these instruments/indicators provide excellent daylight readability with built in backlighting making them easy to read at night time. They include a rotary control plus 2 independent keys for easy menu navigation and to access specific instrument features. Sensors are also offered to enhance their functionality. The MGL AVIONICS STRATOMASTER VEGA Series instruments/Indicators include: Artificial Horizon & Magnetic Compass Display, Altimeter/VSI, ASI, ASI/VSI, Engine Monitoring System (EMS), Fuel Computer, Information Display, Manifold Pressure, Température, RPM, Hobbs, Universal Engine/Rotor RPM, Hobbs, 4-Channel Thermocouple (EGT/CHT), 4 Channel Universal Analog Input (Pressure/Temperature/Voltage/Current) and NAVCOM Control head for MGL N16 NAV/COMM or V16 COMM VHF.

UNITED INSTRUMENTS 8000/8100 Series Air Speed Indicators (ASI) are FAA TSO'd for installation on certified aircraft. 

The 8000 Series ASI indicate the speed relative to the air at sea level altitude. The 8100 Series True ASI indicate the speed relative to the air at sea level or the desired altitude.The indicator has an inner dial to indicate true airspeed. The altitude and temperature are the conversion factors used to obtain this reading with the use of a setting knob. 

When properly connected to an airspeed tube, the 8000/8100 Series airspeed indicators measure the differential pressure developed between the pitot and static opening. 

The pressure is indicated in units of airspeed mph (M) and/or knots (K).

Product Specifications:

Certification: FAA TSO C2b 

Case Configuration: MS33638, 3 inch

Typical Weight: 0.7 pounds

Static, Pitot Pressure Connector:   1/8-27 ANPT

Installation: Removable spring nuts and #6-32 screws

Lighting: Available upon request. All lighted instruments require a light tray sold separately. Please refer to offered SIGMA-TEK 5000B 14V or 28V Light Tray.

UMA  2-1/4" electric tachometers with their high resolution and easy to read displays were designed to offer aviation styling and performance for all types of aircraft. The analog model has a 270° sweep which provides great resolution in both the 3500 and 7000 ranges. The digital model has a bright LED display. Separate power source required. Installation is simple and instructions are included. They can replace mechanical tachometers in Lycoming/Continental engines.

Current: 80 milliamps ­ Size: 2.25" round x 2.75"deep.

The HONEYWELL BENDIX KING® KCS 55A Compass System provides the pilot with a simple, comprehensive visual display of the aircraft's heading and position in relation to a desired course. The system simplifies course orientation, intercept and tracking. Although only the KI 525A Pictorial Navigation Indicator (PNI) and the KA 51B Slaving Control & Compensator Unit appear in the aircraft panel, other remote components  of the KCS 55A system include the KMT 112 Magnetic Slaving Transmitter, the KG 102A Directional Gyro for stabilization of the system and optionally the KA 52 or KA 57 Autopilot Adapters making the KCS 55A a complete slaved compass system. Installation parts and manuals of the above components are sold separately. For further information on these components please refer to their individual product presentations. For additional information on  KCS 55A and technical specifications please consult the Product Description section.

The HONEYWELL BENDIX KING® components of KCS 55A Compass System can be furnished in NEW condition or as USED in Serviceable or Overhauled conditions indicated respectively by the letters "SV" and "OH" in the product reference numbers (SKU and  accompanied by the relevant certification (e.g. yellow tag, 8130-3 form). They are also offered as exchanges / trade-ins  for returned customer owned units indicated by the letter "EX" in the SKU. In the case of an exchange/trade-in option of a customer unit, the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders when our co-operating supplier verifies that the unit is in a reasonable, repairable condition. It is recommended that this option is selected by our customers mainly for upgrades and only in cases when their units are functioning properly at the time removal from the aircraft. In cases when customer units are found by our supplier to be non-repairable, the core deposit shall not be refunded and shipping charges shall apply if customers wish the return of these units to them. 

KANARDIA INDU Series round altimeters are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters. They feature colour LCD display, one or two pointers  with possibility to personalise scales (in feet or meters) and LCD displays. They are offered as standalone (master) altimeters with internal pressure sensors or as slave instruments. The slave version requires some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the CAN bus. KANARDIA INDU Series round altimeters are available for two standard panel hole diameters of 57 mm (2.25") with one pointer and 80 mm (3.15") with two pointers. They can also be ordered with integrated backup battery at additional cost. The backup battery can also handle and additional indicator, typically an airspeed indicator.

This 2-1/4 inch flap indicator uses a resistance potentiometer as a flap position sensor. Transmitter is required. Wt: 9.8 oz.

Amphenol MS MIL-C-5015 Circular Plug Connectors are designed to meet the demanding performance requirements of military standards. These cable mount circular plug connectors have proven electrical capability for equipment applications where durability is important. The Amphenol plugs have threaded couplings and single key/keyway shell polarization for an accurate and reliable connection. The solid shells of these MS Series circular MIL-C-5015 connectors are made from high grade aluminium alloy. The shells are electrically zinc plated with an olive drab chromate finish which ensures a high resistance to corrosion. The inserts of these military circular connectors are made from resilient synthetic rubber which offers a high dielectric strength and resistance to vibration.

The MS3106A-10SL-3S plug can be used with Turn Coordinator TC02E-3-2 or Turn & Bank Indicator TB02E-2-1.

MFD combining IFR GPS navigation, COMM/NAV and enhanced situational awareness capabilities.

OMRON A3C series cylindrical pushbutton switches have the basic design as the M2C Series cylindrical indicators. They provide a high-intensity uniform surface lighting while they have a miniature size with excellent feeling of operation. They have a cylindrical 20-mmX12-dia. body making panel cutouts easier. These switches are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. Please consult the attached documentation for ordering.

The GARMIN® GTR series COMM TSO'd panel mounted transceivers (please see separate presentation) together with the GARMIN® GNC series NAV/COMM radios are replacement products for the popular SL30 and SL40 models. They include new features to reduce pilot workload, while also offering an affordable solution to meet the requirements of the 8.33 kHz channel spacing European Union mandate under the Single European Sky (SES) initiative. They are more powerful than their SL-series predecessors with 10- or 16-Watt transmit power available versions. 

The GARMIN® GNC series NAV/COMM radios are offered with either a 10 W (GNC 255A) or 16W (GNC 255B) COMM featuring a 25 kHz or 8.33 kHz spacing. Both come with a an internal VOR/LOC converter, a 40-channel glideslope (GS) receiver and include the rack, connector kit, and back plate. They are offered as units only or as kits with a 4ft harness to AUDIO Panel.  If purchased with the 4ft harness, they can only be used  in experimental aircraft.

The AVIASPORT indicators (gauges) are reliable, accurate and solid, combining the accumulated experience of more than twenty years with the latest technology  They have been designed for ROTAX engines and their display areas are divided into red, green and yellow zones in line with Rotax limits. They use a pointer that turns 240º or 320º, providing high resolution. AVIASPORT range of gauges includes CHT, EGT, tachometers, oil and fuel pressure, oil and coolant temperature, fuel level, voltmeters & ammeters and offered with casings of different sizes: 80mm; 57mm and 52mm.

The AVIASPORT fuel pressure gauges  have been designed especially to measure fuel pressure in Rotax® engines 912 and work both with 12V and 24V systems. Unlike mechanical gauges, the AVIASPORT ielectronic gauges use a high precision sensor to be installed close to the engine, preventing fuel lines in the cockpit. These gauges are sold without sending units or as kits with matching senders whenever specified.

The ICOM IC-A210 Series of VHF 760 COMM transceivers operating in 118-136.975MHz range are offered as non certified radios. Featured with OLED displays,"flip-flop" arrow button switches between main and stand-by channels, GPS memory function, a built-in DC-DC converter accepting 12/24VDC power source, a built-in voice activated intercom allowing pilot-copilot communication via the headset and two types of rear-panel adapters included for streamlined plug-in connectivity, ICOM A210 series transceivers are a meaningful choice for radio upgrades and replacecements as they are interchangeable with IC-A200, KY96A/KY97A & SL40 radios. IC-A210E is compatible with 8.33kHz channel spacing in addition to the widely used 25kHz. For a certfied model please refer to the  TSO/ETSO certified IC-A220T.

The DIALIGHT 800/801-series MS25041 are high-quality Miniature press-to-test indicators with built-in bulb testing device and an adjustable dimmer (801 series). They use T 1 3/4 bulbs with midget flange base such as GE-330 (12V) or GE-327 (24V) bulbs but LED replacement bulbs can also be used (*). 

With their sleek design and easy installation, and their availability in different vibrant colors they are  the perfect accessories for providing a stunning, uniform glow and enhancing the appearance and functionality of indicators in the panel.

Crafted with durability in mind and made from top-grade materials for excellent protection against weather elements and long-lasting performance,  both 800 and 801 series indicators feature a T-1 3/4 midget flange for 15/32" mounting hole with solder termination, black anodized mounting bushing, aluminum mounting and flange nuts hardware. The push-to-test marking is die-stamped and filled on all lens cap assemblies used with 3 terminal units. They are is compatible with various LED bulb models and ensure a secure and precise fit. Bulbs are NOT INCLUDED. They can be ordered separately.

(*) PNs 800-1030-0337-504, 800-1030-0331-504, and 800-1030-0333-504 of  DIALIGHT 800 Series and PNs 801-1030-0337-504, 801-1030-0331-504, and 801-1030-0333-504 of DIALIGHT 801 Series and PTT indicators can be used with Based LED Replacement Lamps.

KANARDIA AETOS Basic EFIS Kit is a Non Certified complete navigation, flight and engine system for the ultralight airplanes, autogyros and helicopters. This self-contained state-of-the-art EFIS instrument is optimized for ultralight aircraft.

The AETOS Basic EFIS Kit comes with a large 7" sunlight-readable display with high contrast and integrated AHRS and GPS unit (AIRU), engine monitoring unit (DAQU), OAT probe, GPS antenna, cables & accessories. Engine sensors are not included in this kit. In contrast to NESIS EFIS, AETOS EFIS does not support flight maps. Options are available at additional cost to increase the functionality of this device.

ETSO'd Slimline Panel Mounted 16 W VHF Radio with built in 2-place intercom with auxiliary inputs for stereo music and audio warnings. Available with 8.33 kHz or  25kHz frequency spacing options.

HONEYWELL BENDIX KING® KNI-582 Radio Magnetic Indicator (RMI) provides bearing information to either ADF or VOR stations by means of two pointers each of which is read against compass card. The KNI-582 RMI requires inputs from ADF, HSI and NAV receivers and combines three data points on one indicator. The current aircraft heading from an HSI is shown on the card. The magnetic headings to VOR and NDB stations are shown by the twin needles. By combining all this information visually, less interpretation is required thus enhancing overall situational awareness, something especially helpful when the workload is high.

Product Features:

Dual pointer RMI

Accepts AC SIN/COS, DC SIN/COS, Serial, and VOR Composite inputs

Compatible with NAV Receivers such as KN-53, KNS-80, KNS-81, KX-155/165, KX-170B/175B, KNR-615, KNR-630, KNR-634, KNR-665, KNR-665A

Compatible with ADF receivers such as KR-85 (w/ KI-227 -01/04), KR-87, KDF-800/805/8000

Compatible with Compass Systems and NAV indicators such as KCS-305, KCS-55/55A, and KPI-550

Models available with 5 or 28 volt lighting 

Models available with black or gray bezel

TACAN compatible and night vision goggle versions available

TSO'd

Specifications:

Altitude: To 50,000 feet

Operating Temperature: -20 to +55°C

Weight: 3.0 lbs. (1.4 kg)

Power Requirements: 28V 4A / 26VAC 6VA

TSO Compliance: Env. Cat. RTCA DO-160A A1D1/A/SKP/XXXXXSABAAA; TSO C6c (compass); TSO C41c Class A (ADF); TSO C40a (VOR)

Compass Heading Input: Operates from any slaved magnetic compass with ARINC X,Y,Z outputs.

TKM AVIONICS offers different NAV/COMM radios as slide-in replacements of legacy products from BENDIX KING and other manufacturers. The Michel MX-170 by TKM was introduced in early 1984 aiming to replace legacy BK radios such as KX-170A, KX-170B, KX-175, KX-175B type transceivers. The latest TSO'd MX170C with 760 VHF COMM channels and 200 NAV channels is designed to be electrically and mechanically interchangeable (slide in replacement) with the Bendix King KX170 and the Bendix King KX175 series of NAV/COMM radios. Like other TKM radios,the MX170C NAV/COMM has nice features and excellent performance. The dual color LED frequency displays are self-dimming, showing standby frequencies with red and active frequencies with yellow color. The channeling outputs are for 40-channel glide slope (King Glide Slope) and 200 channels (King Slip Code). The MX 170C operates on 13.75 Adc maximum current in transmit. Please refer to the attached owner manual for additional information.

DAVTRON Μ475 Series 2-Function voltmeter/ammeter digital indicators are FAA-PMA approved and come in 475VA/475VAA models and versions, both with lighting capability. Model M485VA ls made primarily for remote shunts. They are both designed for low current drain ( .001 Amp) and are also used in standby and emergency battery packs. Other features include: 

Plus Or Minus Amp Range: 150.0 

Plus Volt D.C. Range: 100.0 

Sunlight Readable Display

One Tenth Amp Resolution

One Tenth Volt Resolution

1.3" case depth

2-1/4" Standard mount