The analog and digital portable two-way radios (walkie talkies), manufactured by QUANZHOU YANTON ELECTRONICS CO., LTD., come in different models covering UHF or VHF and UHF frequency bands and different power outputs for communication over different distances. They have an ergonomic design and cover the needs of various operations. YANTON radios are approved by the Ministry of Information Industry in China and the European CE, RoHS and USA FCC certified/approved for use in other countries.

EASA Certified VHF transceiver 57mm with 6W output power. Automatic selection of 8.33kHz/25kHz spacing and OLED display.

GARMIN® GTX™ transponder product line includes Mode A/C and Mode S TSO'd panel mounted transponders offered in a‭ ‬wide variety of configurations to choose‭ ‬from‭, ‬depending on desired functions‭.‬ Different models are listed under separate product presentations. 

GARMIN® GTX™ 327  is a TSO-certified Mode C digital transponder. Its innovative features, proven performance and reliability bring a whole new level of transponder utility to your aircraft. Features include a solid state design, and with no warm up time, lower power consumption and much lower heat emissions for a longer service life. It provides 200 watts nominal power output and has an easy-to-read DSTN liquid crystal display which reverses the numbers out of black for optimal viewing. An innovative keypad facilitates entering a squawk code while a dedicated VFR button allows for quick-and-easy VFR squawking. Similar to the GTX™ 330 Mode S transponder, the GTX™  327 also offers several timing and display functions, including flight time, count-up and count-down timers, as well as current pressure altitude.

GARMIN® GTX™ 327 Specifications:

Solid State Digital Transmitter

Mode: A/C

Display: DSTN LCD Display

Nominal Output Power: 200 watts 

Dimensions: 6.25"W x 1.65"H x 8.73"D (15.9 x 4.2 x 22.2 cm)

Weight: 3.1 lbs. (1.4 kg)

Product includes: GTX 327 Transponder, Installation kit, Pilot's guide

The STRATOMASTER VEGA range instruments/indicators from MGL AVIONICS includes different 2 1/4" (57mm) microprocessor based color display instruments operating over a wide supply voltage range of 8 to 30V DC with with built in reverse and over voltage protection. They are non certified and only suitable for installation in experimental and sport  (LSA) aircraft. Using a high resolution color graphics display, these instruments/indicators provide excellent daylight readability with built in backlighting making them easy to read at night time. They include a rotary control plus 2 independent keys for easy menu navigation and to access specific instrument features. Sensors are also offered to enhance their functionality. The MGL AVIONICS STRATOMASTER VEGA Series instruments/Indicators include: Artificial Horizon & Magnetic Compass Display, Altimeter/VSI, ASI, ASI/VSI, Engine Monitoring System (EMS), Fuel Computer, Information Display, Manifold Pressure, Température, RPM, Hobbs, Universal Engine/Rotor RPM, Hobbs, 4-Channel Thermocouple (EGT/CHT), 4 Channel Universal Analog Input (Pressure/Temperature/Voltage/Current) and NAVCOM Control head for MGL N16 NAV/COMM or V16 COMM VHF.

The GARMIN® GMA 342 is an affordably priced yet loaded with features TSO'd panel-mounted audio panel providing direct slide-in replacement for legacy GMA 340 or select third-party units. It can support dual comm, dual nav, 3 aux receivers and 2 wired stereo music inputs — enhanced with bass boost levels, equalizer settings and exclusive 3D Audio technology that spatially separates the multiple communication sources entering the pilot's headset.  Up to 2 dedicated stereo music sources can be connected via the unit’s rear connectors. With stereo headsets, incoming audio is spatially separated to reflect how different audio sources come from different directions. An automatic digital voice recorder on GMA 342 continuously captures the last 60 seconds of incoming active comm audio for instant playback with a single button press. Advanced auto squelch technology automatically adapts to a quiet or noisy environment without clipping words or cutting out during conversation.

Accessories: If not included in the ordered unit, installation Kit and other accessories are available at additional cost.

The AV-525 is a VOR/LOC/GS antenna similar in style to the AV-12 but utilizes an internal balun transformer. The antenna is rated at speeds up to 350 mph and altitudes up to 50,000 feet. It is a direct replacement for the CI 157P.

Product Specifications:

Model: AV-525

Application: VOR/LOC/GS Receive Only

Frequency: 108-118 MHz (VOR/LOC) -328-336 MHz (GS)

Impedance: 50 Ohms Nominal

VSWR: 3.0:1 Maximum 108-118 MHz - 2.0:1 Maximum 329-335 MHz

Polarization: Horizontal

Pattern: Omni-Directional

Connector: “BNC” Female

Max. Weight: 0.50 lbs.

Certification: FAA TSO C34e, C36e, C40c

The GARMIN® GTR series COMM TSO'd panel mounted transceivers together with the GARMIN® GNC series NAV/COMM radios (please see separate presentation) are replacement products for the popular SL30 and SL40 models. They include new features to reduce pilot workload, while also offering an affordable solution to meet the requirements of the 8.33 kHz channel spacing European Union mandate under the Single European Sky (SES) initiative. They are more powerful than their SL-series predecessors with 10- or 16-Watt transmit power  available versions. They are offered as units only or as kits with a 4ft harness to AUDIO Panel.  If purchased with the 4ft harness, they can only be used  in experimental aircraft.

The HONEYWELL BENDIX KING® KY 196A/197A series of TSO'd VHF COMM transceivers have a flatpack design, measure 1.3" x 6.3", weight just 2.8 pounds and have the same capabilities except that the 28-volt KY 196A delivers 16 watts and the 14-volt KY 197A 10 watts minimum transmit output power. Both incorporate solid-state construction and feature 9 pilot-programmable memory channels (11 including those in "USE" and "STBY"), flip-flop frequency transfer between active and standby frequencies, a 118.00MHz to 136.975MHz operating range and a digital frequency synthesizer generating 760 COMM frequencies. Despite their wide range of capabilities, KY 196A/197A radios were designed to be easy to read and logical to operate. An audio leveling feature automatically amplifies weak audio signals and mutes strong signals. Racks & connectors (for new installations) and manuals are sold separately. 

The HONEYWELL BENDIX KING® KY 196A/197A  VHF COMM transceivers are available in different versions  including those with Silver Crown Plus faceplates. They can be furnished in NEW condition or as USED in Serviceable or Overhauled conditions indicated respectively by the letters "SV" and "OH" in the product reference numbers (SKU and  accompanied by the relevant certification (e.g. yellow tag, 8130-3 form). They are also offered as exchanges / trade-ins  for returned customer owned units indicated by the letter "EX" in the SKU.  In the case of an exchange/trade-in option of a customer unit, the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders when our co-operating supplier verifies that the unit is in a reasonable, repairable condition. It is recommended that this option is selected by our customers mainly for upgrades and only in cases when their units are functioning properly at the time removal from the aircraft. In cases when customer units are found by our supplier to be non-repairable, the core deposit shall not be refunded and shipping charges shall apply if customers wish the return of these units to them. Please refer to the Product Description section for technical specifications and information on USED avionics.

Splits the signal from a single NAV antenna into two NAV receivers and one glide slope receiver.

PS ENGINEERING has revolutionized audio control in general aviation airplanes. At that time, the original PMA6000 took the audio panel from a collection of switches added as an afterthought, to a multitalented intersystem focal point for cockpit audio.

Radio selection, cockpit communications and even music were seamlessly combined in the modern audio control panel. The PMA6000-series set a benchmark for all GA audio panels that followed.

The next generation PMA6000B benefits from PS Engineering's long experience of audio panel control design and manufacturing experiences. It is an excellent low cost audio panel alternative to the higher end systems that PS Engineering has become so famous for. 

The PMA6000B combines an audio selector panel with a top-quality manually adjusted 4 place VOX mono intercom and a slew of features to enhance versatility and utility. The PMA6000B holds both FAA TSO as well as EASA ETSO and was designed to be made easier to install because of a single 44-pin Sub-d connector. Different PMA6000B models offered with or without marker beacon receiver.

Product Features:

Built-in 4 place mono intercom PS Engineering's ""Set-it and Forget-it"" manual VOX

Optional built-in marker beacon receiver

Split mode for dual audio capability

2 - Com Capability

3 - Intercom isolation modes - Pilot Isolate, All, and Crew

2 - Music inputs with Soft Mute™

2 - Unswitched inputs

6 - Switched inputs

A patented ""swap"" function allows selection of Com 1 or Com 2 from remote pushbutton

Fail-safe feature automatically hard-wires the pilot to Com1 in the case of an outage

Single 44-pin connector making installation easier

Certification: FAA TSO/EASA ETSO

Warranty: 24 months

The AV-532 is a VOR/LOC/GS receive only antenna which consists of taper ground high-strength 17-7PH stainless steel elements to reliably withstand vibration and wind loads. The insulators are weather-sealed compression-molded bakelite with the mounting holes provided. The unit may be mounted with the V pointed either forward or aft. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 3.42 lb @ 250 mph.

The KANNAD 406 AS (P/N S1823502-03) is a aeronautical survival beacon. Thanks to its small size and light weight, the Kannad 406 AS fits easily inside a liferaft. It is supplied with a floating collar.

The KANNAD 406 AS is qualified by the French Civil Aviation in Europe with JTSO-2C91a & JTSO-2C126 and by FAA with TSO-C91a & TSO-C126 applied to “survival” beacons.

The ELT is programmed with either the aircraft tail number, a serial number or the aircraft operator designator. It can be installed inside an aircraft on a mounting bracket or in a carry-off bag (both on options).

The mounting bracket option includes a locking pin to avoid accidental activation before ELT removal. The locking pin can be ordered separately with the carry off version.

The ELT can be fitted with a "Water Switch Sensor" to be activated automatically when in contact with water. A buzzer and a led indicate activation.

An integrated “self test” checks the main functions of the beacon. The test result is given by the led flashing sequence.

Product Features:

Battery replacement is only every 6 years.

Precise pinpointing (<1NM) due to the unparalleled frequency accuracy of the 406 transmitter.

Three frequency transmitter (121.5 / 243 / 406 MHz)

Weight (including battery, auxiliary antenna and floating collar) 2.53 lbs (1150 g)

Options:

P/N S18 20 511-03 carry-off bag

P/N S1820511-02 Mounting bracket with locking pin

P/N S1820514-14 Water Switch Sensor

LORD Corporation AM Series Low Profile Avionics Mounts (also referred to as isolators)) set the standard for compact, highload, high-capacity isolators. They are designed to support and protect avionics equipment in all types of aircraft. Inertial guidance and navigation systems and radar components are examples of applications where these mounts are used. In addition, AM Series mounts are used to isolate engine/aircraft accessories such as fuel controls, pressure sensors and oil coolers. These mounts  are tested and approved to the environmental tests appearing in MIL-STD-810 or MIL-E-5400. They may be used in a temperature range of -65°F to +300°F (-54°C to +149°C) for BTR® Silicone and -40°F to +300°F (-40°C to +149°C) for BTR® II Silicone. They are made with specially compounded silicone elastomers which exhibit excellent resonant control evidenced by the low transmissibility at resonance. These designs also provide linear deflection characteristics.

LORD Corporation AM Series vibration isolators are offered in different sizes and capacities. Please refer to the attached documentation.

EASA Certified 10 W Comm Radio with 25 kHz spacing.

The FLIGHTCOM 403MC is a 4-place panel mount, easy to use, voice-activated mono intercom with 3-position transmit capability designed to fit almost anywhere in the panel.

The KANNAD 406 AF automatic fixed Emergency Locator Transmitter (ELT)  is designed to be installed near the tail of the aircraft and to be connected to an outside antenna (sold separately). A sophisticated “shock sensor” will activate the ELT automatically in the event of a crash. Its small size and light weight make it ideal for general aviation aircraft.  The Mounting Bracket (Strap) is not included. 

A separate version (406 AF-H) has been specifically developed for installation on board a helicopter in flat position (to gain space compared with usual installations at 45° downwards). 

Product Features:

Optional Navigation Interface transmits GPS coordinates significantly shortening Search and Rescue response time.

Operates without aircraft power and incorporates an internal alarm/buzzer avoiding costly installation procedures.

Six year lithium manganese battery.

Three frequency transmitter (121.5 / 243 / 406 MHz)

Weight: (Including batteries) 2.44 lbs (1110 g) / max 2.60 lbs (1180g)

Please refer to the supplied documentation for additional information.

Note: The Kannad 406 AF-COMPACT version, designed for private pilots and light aircraft (usually supplied as kit with rod or whip antennas), has been discontinued and is no longer available.

The ICOM IC-A220 Series of VHF Air Band 760 COMM transceivers operating in 118-136.975MHz range are offered as non certified (IC-A220) or certified (IC-A220T) versions. The IC-A220  is a popular fit with experimental and light sport aircraft. The TSO/ETSO approved IC-A220T will work for all certified aircraft and it comes as a standard unit complete with install kit and mounting tray (IC-A220T), adapted unit IC-A220T-K with edge connector MBA-3 (*) fitted as a replacement for King KY96A/97A, KY196A/197A (**), Icom A200 or A210,and adapted unit IC-A220T-G with D-Sub connector MB113 as a replacement for Garmin SL40 (***). 

Production of  IC-A220T has been discontinued. IC-A220T transceivers have limited availability  in NEW or NEW SURPLUS condition from existing stocks and they are also offered as USED units.

Both IC-A220 and IC-A220T radios support  8.33 kHz and 25 kHz frequency spacings and feature OLED display, 20 memory channels and 20 history memory channels, "flip-flop" arrow button switches between main and stand-by channels, 8W output power, a built-in 2 station intercom, 12 or 24 volt compatibility and automatic squelch. They can be used for radio upgrades and replacecements of  KY96A/KY97A & SL40 radios. 

(*) The MBA-3 is intended for use with the Non-TSO'd model (IC-A220). Use with the TSO'd model (IC-A220T) may void the TSO.

(**) The adapted unit will not directly replace King KY96, KY97, KY196 or KY197 units.

(***) Metal work modification is required as the locking mechanism for the IC-A220T is in a different position on the SL40 tray/rack.

Air Avionics is the common brand for Garrecht Avionik GmbH and Butterfly Avionics GmbH.  VT-2000 is a modern 6.25" rack format Mode-S/ADS-B EASA Certified Transponder (EASA Approval No. EASA.21O.705) with an integrated keyboard for easy operation. It can be installed as a direct replacement for the popular Bendix-king KT76 / KT76A/C series of transponders without any changes to pre-existent wiring and mounting trays. A special mounting tray (sold separately) is available for new installations. It has an integrated internal altitude encoder (alticoder) or or can be connected to any kind of existent alticoder in the aircraft (parallel and serial).

Product Features:

Installation without adapter and modification of existing wiring harness. Just slide in into existing mounting frame of your KT-76 or KT-76A / KT-76C.

Interfaces for future applications (i.e. ADS-B, TIS)

Certification base: ETSO-2C112a, ED-73B

Output power: min. 220 Watt (Class-1) Level 2es (extended Squitter)

Internal Alticoder

Interfaces für external alticoder (serial or parallel)

Direct-GPS NMEA Interface for ADS-B, no adapter required

Transflective color TFT Display

Illuminated keyboard

RAMI AV-300 Antenna is a passive three frequency (121.5, 243 & 406 MHz) fiberglass rod antenna for use with an ELT (Emergency Locator Transmitter) in low speed general aviation aircraft (up to 350 knots).

Product Specifications:

Application: Airbone ELT

Frequency: 121.5, 243 & 406 MHz

Impedance: 50 ohms nominal

VSWR: 2.0:1 max at 121.5 MHz,2.0:1 max at 243 MHz, 1.5:1 Max. at 406 MHz

Polarization: Vertical

Pattern: Omni-Directional

RF Power Capacity: 10 Watts CW

Connector: BNC Female

Max Weight: 9 oz max

Max Height: 14.00 inches max