Solid shank rivets are relatively low-cost,  permanently installed fasteners used as structural parts in aircraft and other applications where reliability and safety consist a priority.  These rivets are produced in accordance with military and other international standards such as US Army-Navy (AN) standard and Mil-Spec (MS) that followed. AN426/MS20426 and AN470/MS20470 Series rivets are solid aluminum rivets with countersunk head or universal head respectively. Sourced from quality suppliers they are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They are  available in different diameters and lengths and sold by the pound (lb). Those designated by the letter "A" in their part numbers are "soft" rivets fabricated from 1100-grade aluminum with a tensile strength of 16,000 PSI while rivets designated by the letters "AD" are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI. For additional information please refer to the article on an overview of our fasteners, other supplied documentation, the individual product presentations or contact us.

Countersinking is used to ensure that flat head screws or fasteners sit flush against the workpiece. JITTERBUG Pilot Countersink Cutters can be used with flush rivets in different countersinking applications. They consist cost effective alternatives to other brands. They are available separately or in convenient sets of different pilot diameters. Offered sets include 6 pieces (1/4 5/16 3/16 5/32 3/32 1/8 in.) or 4 pieces (3/16 5/32 3/32 1/8 in.) per set. For additional information please consult the supplied documentation or contact us.

Blind rivets (also commonly referred to as POP Rivets) are mainly used in applications where there is no access to the rear (blind side) of the joint. They are produced in accordance with different standards specifying their properties, sizes/dimensions, materials, finishes, installation methods & other information for their application. A benefit of blind rivets is that they are not material specific and therefore they can be used to combine two different material types together. 

This listing relates to those manufactured in accordance with National Aerospace Standard NAS 1919, a U.S. industry standard for the aerospace industry created and maintained by the Aerospace Industries Association (AIA).

AIA NAS 1919 & 1921 series rivets are general-purpose, mechanically-locked blind rivets used in structural aerospace and industrial applications for creating permanent and strong joints. As structural rivets(*) they are high-strength fasteners intended for use on load-bearing applications, offering greater shear and pull-out strength, and vibration resistance. They feature a self-plugging, serrated stem and can be supplied with a protruding head  (NAS 1919 Series) or 100°  flush head (NAS 1921) style. Produced by different manufacturers (such as PCC CHERRY AEROSPACE, HOWMET AEROSPACE HUCK or TRIMAS AEROSPACE ALLFAST) they are offered in different materials (aluminum, corrosion resisting A286 stainless steel or Monel®) and finishes, different nominal shank diameter sizes & corresponding grip ranges in inches. 

Both NAS 1919 & 1921 series rivets are sold under OEM brands and part numbers or as  Standard part numbers under our own branded (AVIATIONEU NEW ERA) product lines, in pieces or packs where the specified number of fasteners per pack is indicated after the letters "PK" in the product reference number (SKU). Depending on the selected size & stock conditions alternate part numbers of the same fastener may be supplied in lieu of the ordered, meeting or exceeding Standard specifications. 

For more information please refer to the attached documentation or contact us.

(*) Other structural and non-structural blind rivets are also offered for a wide range of applications. Please refer to their separate listings.

ATI® TOOLS 100A series (straight drive) and 101A series (offset drive) AN470/MS20470 universal-head cup shaped  rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. Respective flush head rivets of ATI® TOOLS 100A/101A series are designated by the letter "F" after the series number (i.e. 100AF/101AF respectively. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Shank diameter 0.401". Available in different rivet sizes, body diameters and lengths in inches.

Countersinking is used to ensure that flat head screws or fasteners sit flush against the workpiece. Countersinks used in aerospace and industrial applications are made of durable materials such as High Speed Steel (HSS) known for its hardness, toughness, and ability to withstand high temperatures. High Speed Steel (HSS) countersinks are well suited for cutting aluminum sheet metals. When combined with Cobalt, an alloying agent in steels to improve the hardenability, strength, and wear resistance in machining applications but also due to its ability to resist wear at higher temperatures, the  respective countersinks are often used for cutting stainless steel and other aluminum alloys.

Sourced from quality suppliers, integral (fixed) pilot Microstop countersink cutters are offered as part of our own labeled (AVIATIONEU NEW ERA) product lines. Made from HSS or HSS Steel with Cobalt, they consist ideal tools for aircraft manufacturers, aircraft maintenance/ repair stations or  industrial manufacturers for precise and accurate countersinking, cost-effective alternatives to other OEM products and and stocked by our suppliers for fast deliveries. 

Offered in different flutes, body and pilot diameters and sold  either separately (*) or in custom sets to address specific customer needs in machining applications.

Because of the difference in composition between HSS and Cobalt, main strengths of HSS countersinks are their high hardness and wear resistance. Therefore, as a general rule, they consist a better choice when you want your countersinks to retain their strength even when exposed to extreme wear or abuse. For higher hardenability, strength, and wear resistance and in applications when when countersinks are to be exposed to extremely high temperatures, cobalt countersinks should best be used.

AVIATIONEU NEW ERA countersinks can be used with popular adjustable or Microstop countersinking units utilizing a threaded shank drive (sold separately). For additional information please consult the supplied documentation or contact us.

(*) Minimum Order Quantities apply depending on the selected countersinks or their sets.

ATI® TOOLS 105A series AN470/MS20470 universal-head cup shaped double offset drive rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Rivet Type: AN470/MS20470 universal-head. Shank diameter 0.401".  Available in different rivet sizes, body diameters and lengths in inches.

ATI® TOOLS 107A series flush straight drive rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. Large radii at critical points enable these rivets to withstand continuous rugged use.They are slightly crowned with a highly polished face designed for rapid flush riveting where a smooth skin surface is essential and feature large radii at critical points to prevent breakage, protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Shank diameter 0.401".  Different sizes are available serve specification requirements for face diameters and lengths.

HI-SHEAR Fasteners are patented fasteners of HI-SHEAR CORPORATION (Patent Holder), subsidiary of LISI AEROSPACE, a manufacturer of advanced aerospace fasteners and installation equipment used in space, military and commercial vehicles. Depending on the fastener, they are made by quality fastener manufacturers (licensees) in different  countries including but not limited to LISI AEROSPACE companies, HOWMET ALCOA / SIMMONDS / FAIRCHILD, PCC  SPS, and others. 

HI-SHEAR nuts and collars are designed to fit with their related HI-LOK™/HI-TIGUE™ and HI-LITE™ pins  (separately presented) forming the respective fastener system. HI-LOK™ nuts and collars are designed to fit HI-LOK™ & HI-TIGUE™ pins. HI-LITE™ nuts and collars are designed to fit HI-LITE™, PULL-IN™, PULL-STEM™ & TAPER HI-LITE™ pins.

With a wide range of shapes, materials and coatings, they are suited for most of structural assemblies and are commonly used in the aerospace industry in tension and shear applications. Collars’ wrenching element is designed to break-away at a controlled preload. It has been tested over time and has proven its reliability when installed with non-torque-controlled tools. Main features of nuts and collars include:

- controlled preload

- wide variety of materials and coatings for installation in all structures

- suitable for shear or tension applications, with captive washer, self-aligning or self-sealing options

- limited access installation, using conventional tooling

- designed with a counterbore to fit nominal and oversized pins

- nuts allow customized torque and preload & low height design for low access areas

Please refer to the supplied documentation for additional information.

Blind rivets (also commonly referred to as POP Rivets) are mainly used in applications where there is no access to the rear (blind side) of the joint. They are two-piece fasteners consisting of the rivet body (aka shell, or hat) and the stem or mandrel, pre-assembled and ready to use. They are not material specific and therefore they can be used to join two different material types together.

Rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint. Upon reaching the designed clamping force, the mandrel snaps and is discarded. 

They come in different materials, sizes, military or industrial standards, and cover a wide range of structural and non structural applications.

Non structural blind rivets are those designed for applications where the connection doesn't need to withstand significant load-bearing forces. They are offered by different  manufacturers under their respective brands, such as STANLEY® Engineered Fastening AVDEL® & POP®, and others but also as part of our own labelled (AVIATIONEU NEW ERA) product lines, sourced by quality suppliers and intended as cost-effective alternatives to OEM parts. Depending on the rivet, they are made of different materials such as steel, stainless steel,  alluminum alloys, or combinations, and supplied in different head styles, in Inch or Metric (M) diameters, lengths and grip ranges.

Blind rivets conform to national and international military, aerospace and industrial standards such as MS, AIA/NAS, DIN, ISO and others.

Non structural blind rivets produced in accordance with the German DIN 7337 Standard or respective replacing ISO Standards (ISO 15983 for Protruding Head, and ISO 15977 for Flat/Countersunk Head blind rivets) are offered as part of AVIATIONEU NEW ERA product lines.

Sold in pieces but mostly in packs with the number of rivets per pack indicated in the product SKU after the letters "PK". Appearing sale prices are per unit of sale used each time. Depending on the selected rivet & prevailing stock conditions alternate part numbers of the same rivet may be supplied in lieu of the ordered, meeting or exceeding Standard specifications. For additional information on different products please refer to the Product Description section, the supplied documentation or contact us.

HOWMET® AEROSPACE Inc. (formerly ARCONIC Inc.) develops and manufactures high performance, engineered products and solutions for the aerospace, industrial gas turbine, commercial transportation and oil and gas markets. HOWMET® FASTENING SYSTEMS product range under different brands offers the greatest breadth and depth of fastening solutions available including self-locking nuts, quick-release fasteners, draw latches, threaded inserts, lock-bolts, and structural blind fasteners.

HOWMET FASTENING SYSTEMS structural blind fasteners and lockbolts (including those under HUCK® brand) are designed to provide permanent, vibration-resistant, superior-quality joining solutions for use in aerospace and industrial applications. Suited for applications where the joints are integral to the structure, they offer high tensile, shear & clamp properties.  For additional information please refer to the Product Description section and the supplied documentation. Installation tool systems (separately listed) are also offered.

RAPCO produces quality FAA-PMA approved replacement organic and metallic brake linings for Cleveland and McCauley brake assemblies on most general aviation aircraft. Organic linings are actually made from a semi metallic mix. RAPCO combines brass, copper and Kevlar fibers with a high temperature binding compound to provide outstanding performance and long service life. Most RAPCO organic linings have a built in wear indicator, which reduces the risk of damage to the brake disc and helps to optimize lining life. RAPCO organic linings are available in boxes of 10 or in organic lining kits containing the proper number of linings and rivets necessary for replacement on Cleveland or McCauley brake assemblies. They are convenient to have on hand when the need for relining occurs. Metallic lining replacements for the Cleveland brake assemblies are made of sintered steel, a specially developed process that fuses metallic particles to a steel carrier plate. RAPCO metallic linings offer long life and excellent braking performance.

RAPCO Brake Rivets are FAA-PMA approved quality tubular rivets produced from plated steel for mounting aircraft brake linings. The RAPCO RA825 Rivet Tool Kit is recommended for proper installation.

Please refer to the attached Application Guide for additional information.

Blind Rivets are multi-piece rivet assemblies, capable of being installed from one side of the workpiece.Traditionally, blind rivets were used on aircraft leading edges, trailing edges, and close out areas which are limited to access to one side of the structure.  Current blind rivet usage has expanded to many additional areas of the aircraft in an effort to decrease labor expense and to address the ergonomic issues of solid riveting.

The CherryMAX® locked spindle blind rivets by CHERRY® AEROSPACE are the most reliable, high strength structural fasteners with visual inspectability in the world today. They are also known as "bulbed" fasteners due to their large blind side bearing surface, developed during the installation process. They feature a a visibly inspectable  "Safe-lock" locking collar for more reliable joint integrity, and their own installation washers, which eliminate the problems resulting from worn tool anvils. CherryMAX® rivets are used in thin sheet applications and in materials that may be damaged by other types of blind rivets. They meet the requirements of PS-CMR-3000 and can be supplied in 1/8" through 1/4" diameters in both nominal (CR3212 and CR3213 Series) and 1/64" oversize diameters (CR3242 and CR3243 Series). 

Please refer to the supplied documentation and the Product Description section for detailed information on CherryMAX® rivet and other blind rivets manufactured by CHERRY® AEROSPACE. 

Blind Rivets are multi-piece rivet assemblies, capable of being installed from one side of the workpiece.Traditionally, blind rivets were used on aircraft leading edges, trailing edges, and close out areas which are limited to access to one side of the structure.  Current blind rivet usage has expanded to many additional areas of the aircraft in an effort to decrease labor expense and to address the ergonomic issues of solid riveting.

The CherryLOCK® blind rivets by CHERRY® AEROSPACE come in below  mentioned types, and in different sizes, materials and strength levels. A complete range of recommended power tools, hand tools and pulling heads are also available.

CherryLOCK® ‘A’ Code “non-shift”, self-plugging blind rivets 

Single action, mechanically locked, wire-drawing fasteners providing excellent hole-fill and sheet take-up capability. They conform to the Procurement Specification NAS 1400 and Standards Pages NAS 1398 and NAS 1399.These rivets are offered in aluminum, monel and A-286 stainless steel materials in a wide variety of diameters and grip ranges. CherryLOCK® ‘A’ Code  "Wiredraw"  rivets are locked spindle flush fracturing structural rivets manufactured in 3/32", 1/8", 5/32", 3/16" and 1/4" diameters in 100° flush head and protruding head style configurations and offer grip ranges from .020 in the smaller diameters to 1.073 in the larger diameters. The 3/32" diameter rivet is available in A-286 only with grips ranging from .020 to .562. Rivets 1/8" diameter and larger have head markings to identify grip, material and manufacturer for ready inspection. The flush fracturing spindle eliminates the need for shaving and meets the flushness requirement of the NAS 1400 specification. These rivets are especially suited for sealing applications and joints requiring excellent sheet take-up and allow simple installation with a wide variety of Cherry® nonshifting and shifting tools. 

Both CherryLOCK® ‘A’ & Wiredraw Rivets rivets are designed to provide strong, reliable fastening solutions, but the choice between them may depend on specific application requirements, such as material compatibility, strength needs, and installation conditions. Both offer a wide grip range, making them versatile for different thicknesses.

Bulbed CherryLOCK® locked spindle and flush fracturing structural rivets

They consist a complete shear fastening system.  Their features can be utilized for optimum strength and performance in both thick and thin sheets. They provide the highest possible design integrity, particularly in double dimple or thin backside sheet applications. CherryLOCK® hydroshift installation tool systems are required for installation. They conform to Procurement Specification NAS1740 and Standards Pages NAS1738 and NAS1739.

For additional information on CherryLOCK® rivets and other blind rivets manufactured by CHERRY® AEROSPACE (separately listed) please refer to the supplied documentation and the Product Description section. 

ATI® TOOLS 106A series flush swivel type rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Rivet Type: Flush Swivel Type. Shank diameter 0.401".  

AIRPRO INDUSTRY CORP. manufactures professional quality air tools, hand  & auto repair tools and accessories for professional applications under  the brand name AIRPROWU. AIRPROWU extensive product line ranges from aircraft tools to industrial, automotive/motorcycle ,tooling/molding, construction and auto body shop solutions and solutions for electronic assembly lines. AIRPROWU compression riveters include different models covering different capacity requirements for aluminum and steel. They come in different dimensions and are  offered with matching yokes to cover various application needs. Please refer to the specifications of individual compression riveters.

HSTOOLING (formerly HI-SHEAR TOOLING) is a brand of ZEPHYR Manufacturing Co., Inc. (aka Zephyr Tool Group) designing and manufacturing the highest quality aerospace and industrial assembly tools and tooling systems.

HSTOOLING product porfolio includes installation, assembly and repair tools for Aerospace (air drills, riveters, both conventional rivet hammers and compression riveters, specialty fastener installation and other tools and accessories).

HSTOOLING ULTRALITE® compression riveters include different models covering different capacity requirements for aluminum and steel.They are  offered in Alligator jaw and C-Yoke models and feature ergonomic design, weight reduction vs. comparable-force models, high-strength forged jaws and C-yokes, precison bearings and shafts.  The new 702 and 702T alligator models posess outstanding force-to-size ratios. 

HSTOOLING Air Driver Assemblies are designed specifically for installing HI-SHEAR CORPORATION HI-LOK™ (*), HI-LITE™,  and HI-LOK™/HI-TIGUE™ pin and collar fastener combinations. They come in a variety of sizes and configurations, to drive fasteners in both open and restricted-access areas. Compact, lightweight, fast and reliable HSTOOLING tooling systems generate low noise compared with conventional riveting, require minimum employee training, and are designed to operate at a normal factory air pressure of 90 psi with 1/4 or 3/8 inch air lines.

Installation/removal tools for Hi-Lok™ or Hi-Lok™ style fasteners made by Jiffy Air Tool and USATCO are also offered. Pleae refer to the respective product presentations.

For additional information please refer to the supplied documentation or contact us.

(*) The HI-LOK™ fasteners from HI-SHEAR CORPORATION, subsidiary of LISI AEROSPACE, are the second most used fasteners in aircraft structural assembly after the solid rivets MS20470 and MS20426. The HI-LOK™ fastener system includes a rivet pin (similar to a screw but with additional advantages) and a collar (similar to a nut).

U.S. Air Tool Company Inc. (USATCO) is a manufacturer and worldwide distributor of high quality tools for the aerospace/aviation industry. Their offered product range includes installation, assembly, and repair tools and related accessories for air drilling,punch & cutting,  clamp & fastening, cable, wiring & tubing,  lighting & inspection, testing & measuring, riveting, sheet metal forming, sanders & grinders, files,  abrasives & saws, an extensive range of hand, assembly, shop & application tools and more.

For additional information onUSATCO product portfolio please refer to the Product Description section, the supplied documentation or contact us.

Solid shank rivets are relatively low-cost,  permanently installed fasteners used as structural parts in aircraft and other applications where reliability and safety consist a priority.  These rivets are produced in accordance with military and other international standards such as US Army-Navy (AN) standard and Mil-Spec (MS) that followed. AN426/MS20426 and AN470/MS20470 Series rivets are solid aluminum rivets with countersunk head or universal head respectively. Sourced from quality suppliers they are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They are  available in different diameters and lengths and sold by the pound (lb). Those designated by the letter "A" in their part numbers are "soft" rivets fabricated from 1100-grade aluminum with a tensile strength of 16,000 PSI while rivets designated by the letters "AD" are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI. For additional information please refer to the article on an overview of our fasteners, other supplied documentation, the individual product presentations or contact us.

Gauges (also termed as gages) and gauge scales are widely used for inspection or measurement of correct grip length of  rivet pins, shear lockbolts, structural screws and bolts in aerospave and industrial applications. They ensure correct fastener selection, enhancing structural integrity, simplify the measurement process saving time during assembly, and improve accuracy in maintenance and repair tasks. Made from durable materials for long-lasting use (including high-strength alloys and stainless steel) they come with easy-to-read markings for quick and precise measurement.

Protrusion grip gauges & their assemblies (including apart from the grip gauge a grip gauge slide) can be supplied for use on HI-SHEAR Hi-Lilte®/Hi-Lok®/Hi-Tigue® Series of fasteners or those from PCC CHERRY AEROSPACE. 

These gauges are offered as sets of blades with different color markings for different nominal diameter sizes in Inch or Metric (mm) systems with the letter "M"in their part number denoting a Metric version. For example, those with 2-1522 part number, include five stainless steel blades (5/32", 3/16", 1/4", 5/16", and 3/8") on a keychain for portability, and can be used  with HI-SHEAR Hi-Lok®/ Hi-Tigue® fasteners ensuring proper pin protrusion for safe aviation fastener applications.Their counterparts, 2-1522HST are suitable for HI-SHEAR Hi-Lilte® fasteners. 

Grip Gauge Scales with or without a slide are also offered with measurement graduations in inches or inches and millimeters. The 269C3 Grip Gauge Scale from PCC CHERRY AEROSPACE, made of high-strength alloy, has been designed for precise grip measurement in various materials in aircraft structures. Can be used with CherryMax® & CherryLok® rivets. Its durable construction ensures long-lasting use, while its clear markings for quick reference, and user-friendly design for easy insertion into prepared holes for reliable readings, simplify the measurement process.

Depending on the selected part & stock conditions, grip gauges & scales for HI-SHEAR and PCC CHERRY AEROSPACE fasteners can be supplied as OEM parts or equivalent parts from other suppliers, such as OMEGA TECHNOLOGIES (separately listed) meeting or exceeding specifications. 

Economy models of gauges for shop rivet heads and rivet lengths are also available from ATS and AVERY TOOLS and can be used for measuring both universal head and flush rivets. Rivet head gauges are offered as a set of four gauges for -3, -4, -5, & -6 rivet sizes permanently stamped on each gauge. Each gauge measures MINIMUM height and MINIMUM diameter of shop heads AFTER setting eliminating guessing if the rivets are properly set, and are color coded with anodized finish. Their respective rivet length gauges measure -3, -4, -5 & -6 rivets and have been designed for checking the length of rivets BEFORE setting. Their set of rivet head gauges and the length gauges can be ordered as kits or separately.

For more information please contact us.

MS20604 and MS20605 Standard pull-thru rivets are unique blind rivets typically used in nut plate applications. MS20604 and MS20605 series blind rivets are superseded by those of NASM20604 and NASM20605 respectively.They are both non structural blind rivets with universal head (MS20604) or 100 deg. flush head (MS20605). These rivets are ideal in circumstances with very limited clearance while allowing for a secure set on both sides of the application. The symmetrical insertion allows for access and installation on either side while retaining its blind rivet capacity of one-sided installation. NASM/MS 20604 rivets come with a Universal Head, allowing for ease of installation while retaining strength and security. 

Sourced from quality manufacturers, NASM20604/MS20604 and NASM20605/MS20605 blind rivets are offered either as part of our own label (AVIATIONEU NEW ERA) product lines or as OEM parts of PCC CHERRY® AEROSPACE and other manufacturers (separately listed). They are available in different mil-spec approved materials, such as 2117-T4 grade Aluminum or 5056 Grade Aluminum, finishes and sizes. They are sold in packs of specified number of rivets per pack indicated after the letters "PK" in the product reference code (SKU).