MOLYKOTE® is a registered trademark of DUPONT® de NEMOURS (formerly DOW CORNING® Corporation). MOLYKOTE® Greases are made to withstand severe-duty conditions. With a full range of high-performance greases – solid to semisolid materials with a lubricating fluid, thickening agent and additives MOLYKOTE® feature:

High-temperature performance exceeding 180°C (356°F)

Low-temperature performance down to -40°C (-40°F) and, in some cases, as low as -73°C (-99°F)

Resistance to chemicals, such as solvents, fuels, acids and more

Good corrosion protection, with resistance to moisture, oxidation and water washout

Solid lubricants to increase protection on wear surfaces

Specialized bases, including silicone, fluorosilicone and PFPE (perfluoropolyether) oils 

MOLYKOTE® Greases are suitable for a wide range of applications, including gears, all types of bearings, conveyor systems, slides, drives, pumps, valves, seats and shafts. 

For additional information please refer to the Product Description section and the supplied documentation.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates. CHEMETALL® ARDROX® brand is the leading brand for aerospace surface solutions including paint and scale removers, exterior aircraft & gas turbine engine compressor cleaners, corrosion inhibiting and non-destructive testing protective compounds for both aircraft and aero engines and materials.

CHEMETALL® ARDROX® Corrosion Inhibiting Compounds' (CIC) range includes AV 8, AV 15 (aka DINITROL AV15), general purpose AV 25, the most versatile AV 30 and AV 40.  They are water displacing, long-term corrosion inhibitors highly  penetrating  areas exposed to severe corrosion conditions and combining good penetration properties with excellent corrosion inhibiting characteristics and a low applied film weight. Their viscosity is optimized to ensure an effective protective coating and promote penetration into otherwise inaccessible areas of the airframe. Applied as a coating to protect metals in airframe structures, on painted and unpainted surfaces, and in aerospace components to safeguard metals from corrosion. In areas exposed to severe corrosion conditions AV 8 should be overcoated with AV 100D - a heavy duty, waxy, firm film CIC.

CHEMETALL ARDROX® CIC are offered in different packaging options and comply with different specifications including Boeing BMS, MIL-PRF-16173, McDonnell Douglas DMS, Airbus AIMS and others. They are classified as HAZMAT Hazardous Materials UN Number: UN1139 - UN Class: 3.

CHEMETALL ARDROX® 3140 Corrosion Preventative contains film forming agents, antioxidants and corrosion inhibitors in a refined hydrocarbon solvent base. Provides long term protection for raw materials, sub-assemblies and finished components, which are to be stored or used in corrosive environments. 

CHEMETALL ARDROX® 6367 Turbine Engine Cleaner is a liquid concentrate which consists of an aqueous blend of biodegradable surfactants and corrosion inhibitors formulated to clean the compressor sections of gas turbine engines. It is solvent free and removes deposits, oils and their oxidation products in the compressor area. Contains corrosion inhibitors providing protection against corrosion for up to 3 days during engine standstill times. Does not contain any EDTA, NTA or their salts. Regular cleaning with Ardrox® 6367 helps maintain peak engine efficiency and reduces maintenance and fuel cost. Ardrox® 6367 is compatible with recognized antifreeze materials used during cold weather cleaning. Approved for use in a range of turbine engines including CFM56 CP5060 , GE SPM 70-80-04, Ref. C04-140, P&W SPM 70-12-00, SPMC 87-10A, Rolls Royce CSS 260 and others. Offered in different packaging options including 25-liter pails and 55 USG drums.

For additional information please consult the Product Description section or the attached documentation.

SHANGHAI HANSI INDUSTRIAL CO. (HANSI) is an adhesive producer with a wide product range of polyurethane and epoxy adhesives, acrylate and water-based adhesives, silicone adhesives and respective hardeners. HANSI adhesives are used in an extensive range of applications including aerospace, automotive, electronics, construction, transportation, filter, sound insulation and composite.

HANSI high performance solvent free two component epoxy resin adhesives can be used for bonding and sealing of large-area composite panels of metal and non-metal materials. They exhibit high strength and toughness and thermal shok resistance. Their VOC content makes them more environmentally friendly and safe. Different series include:

MegaGlue® 2003/5112/3042/ 45121V Series & ACROBOND® EP242 Series. Products in these series are widely used and feature good toughness, wide temperature application range and moderate activation time which can reduce VOC emissions, reduce weight and energy consumption.

MegaGlue® 4001/4001CM Series. Products are high viscosity fast curing toughened two-component epoxy based adhesives. They can be used for bonding and sealing of FRP, SMC, CGRP and other composite materials in rail transportation, automobile, aerospace and other industries. Mostly selected for their high strength and toughness and their fast curing.

MegaGlue® 3003/3010 Series.  Products in these series include toughened two-component epoxy based adhesives with high viscosity and fast curing. Used in surface repairs, edge sealings and landfilling in rail transportation, ship, van and other industries.

Depending on the selected product, HANSI MegaGlue® epoxy resin adhesives are offered in 50ml/400ml cartridges, 15 kg buckets or 20 kg barrels.

For additional information on HANSI MegaGlue® epoxy resin adhesives please consult the supplied documentation or contact us.

Hempel A/S is a leading solution provider for coatings used in an extensive range of protective, decorative, marine, container, industrial, and yacht applications. Sold under different brands Hempel's product portfolio includes topcoats, primers / intermediates, thinners, varnishes, linings, antifouling, CUI/heat/insulation products as well as products for pipe coating , cargo holds, cargo tanks, wind blades, road marking, and other uses. Hempel"s brands and respective products are briefly presented in the Product Description section.

Note: Required color shade must be specified at the time of ordering. Price variations apply depending on selected shade. Please consult the supplied documentation & contact us for quotation.

McGEAN CEE-BEE™ and HONEY BEE™ Lavatory Maintenance product portfolio includes CEE-BEE™ extensive range of cost-effective top-performing cabin cleaners, deodorizers and fresheners available in a variety of formats and HONEY BEE™ toilet system cleaners, the most effective in the industry in removing scale and organic deposits in both vacuum and recirculating toilet systems. Their use results in clean, well-maintained lavatory systems ensuring reliability, preventing costly flight delays and delivering a pleasant, fresh-smelling environment for travelling passengers. Their waste line, tank & component cleaners are ideal for the maintenance, overhaul and repair of aircraft lavatory systems and component parts. They meet OEM and AMS specification requirements. Respective product lines include:

HONEY BEE™ 60 & 60NP acidic liquid aircraft lavatory cleaners, the first developed for removing hard water scale from vacuum and recirculating toilet systems and the second for removal of hard water scale and accumulated waste materials from toilet systems in aircraft. Both are thickened for better cling on vertical surfaces and can be used for removal of stains from stainless steel. They can be applied directly to scale deposits for local cleaning, eliminating the need for removal of toilet systems. Safe on stainless steel, most plastics and good quality paint.

HONEY BEE™ 60T and 60 TNP, acidic liquid cleaners, the first developed for removal of hard water scale from vacuum toilet system lines, lavatory holding tanks & components in immersion tank applications and the second for removal of hard water scale and accumulated waste materials from vacuum toilet systems in aircraft, preventing waste line clogs. Both can be applied directly to scale deposits in toilet bowls for spot removal and they are safe on stainless steel, acrylic plastic and good quality paint. 60 TNP effectively removes stains from stainless steel lavatory components, titanium waste lines and waste holding tanks. Approved for use with the Cee-Bee® Vacuum Cleaning Kit. Surfactants biodegradable.

Product lines for Lavatory Deodorants, Fresheners & Cleaners include:

CEE-BEE™ Aerofresh 35 Concentrated Lavatory Deodorant & Cleaner

HONEY BEE™ 20C  Highly Concentrated Lavatory Cleaner & Deodorizer

HONEY BEE™ 24 - Powerful aircraft lavatory deodorant 

HONEY BEE™ 26 - Cleaner & Deodorizer for Aircraft Lavatories 

HONEY BEE™ Deodorant Pak 44 -Powerful aircraft toilet deodorant

HONEY BEE™ Aerogel “Sparkle” Air Freshener

HONEY BEE™ Freshener 50 - In-Flight Liquid Cleaner & Deodorizer

HONEY BEE™ Freshener Soak 50C - Lavatory Deodorant

HONEY BEE™ 90 Aircraft Interior Surface Cleaner & Deodorizer

HONEY BEE™ 90 RTU General-Purpose Aircraft Interior Cleaner & Deodorizer

For additional information please consult the supplied documentation.

EXXONMOBIL® AVIATION Mobil Jet Oil 254 is a third-generation oil formulated to deliver exceptional high-temperature thermal stability  (HTS), excellent resistance to coking and deposit control as well as exceptional oxidation and corrosion protection. It meets the demanding requirements of latest technology  aircraft-type gas turbines operating over a wide range of severe operating conditions.  When compared to a typical Type II lubricant, Mobil Jet Oil 254 reduces bulk oil oxidation by up to 50 percent and shows deposit control capability 50 F higher.  These properties have been confirmed in various laboratory tests including; the Corrosion-Oxidation Stability Test,  Alcor Deposition Test, Vapor Phase Coker, Erdco High-Temperature Bearing Test, Ryder Gear and the Mobil Thin Film Oxidation Test.The closely controlled low-temperature viscosity of Mobil Jet Oil 254, along with its low pour point (below -54 ºC), ensure good low-temperature fluidity to permit starting and lubrication at temperatures as low as -40 ºC.  In extensive laboratory testing and in-flight experience, Mobil Jet Oil 254 also exhibits excellent bulk oil stability at temperatures up to 232 ºC (450 ºF) for extended periods.  The evaporation rate at these temperatures is low enough to prevent excessive loss of volume.  The load-carrying ability of Mobil Jet Oil 254 comes from its synthetic base stock viscosity and, therefore, is not subject to loss from viscosity index additive shear.  

Product Features & Benefits:

Excellent thermal and oxidation stability reducing the formation of carbon (carbon coking) and sludge deposits. Helps operators reduce shop visits and maintenance costs. Maintains engine efficiency and extends engine life. Reduces bulk oil oxidation by 50% and increases deposit control by 50 ºF

Excellent wear and corrosion protection extending seal, gear and bearing life. Reduces engine maintenance. 

Viscosity and shear stability across wide temperature range providing effective lubrication at high operating temperatures

Chemically stable at high operating temperatures reducing evaporation losses and lowering oil consumption

Excellent resistance to foaming maintaining film strength under rigorous operating conditions

Good low temperature fluidity permiting start-up and ensuring effective lubrication of critical components at temperatures as low as -40 °F.

FLAMEMASTER® CHEMSEAL® range includes firewall, fuselage, fuel tank, windshield, access door and other specialty sealants and adhesives to cover a variety of aviation applications. For additional information please refer to the Product Description section and the supplied documentation. For non-listed products please contact us.

EASTMAN SKYDROL™ Aviation Hydraulic Fluids were developed to meet the requirements established by manufacturers and backed by recognized experts in phosphate ester technology. SKYDROL™ was the first fire-resistant hydraulic fluid in the industry and today remains the most advanced aviation hydraulic fluid. SKYDROL™ aviation hydraulic fluids include:

SKYDROL™ PE-5,  a Type V, fire-resistant hydraulic fluid offering the longest fluid life of any phosphate ester fluid available today, even under high moisture conditions. Key benefits include less frequent fluid replacement, reduced disposal volume and lower environmental footprint. Meets BMS3-11P Type V, Grade A & C specification.

SKYDROL™ 5, a lighter-weight hydraulic fluid due to its lower density resulting in fuel savings.  SKYDROL™ 5 is the first aviation hydraulic fluid demonstrating erosion-resistance at higher temperatures leading to decreased maintenance and downtime. Meets BMS3-11P Type V, Grade B & C specification.

SKYDROL™ LD-4, the world’s best-selling Type IV aviation hydraulic fluid, featuring low density, valve erosion prevention, and deposit control. Erosion resistance is made possible by a breakthrough anti-erosion additive and acid scavenger included in the formulation. Meets BMS3-11P Type V, Grade B & C specification.

SKYDROL™ 500B-4, the only commercially available standard-density aviation hydraulic fluid offering additionally improved erosion resistance, as it contains the same anti-erosion additive and acid scavenger as LD-4. Meets BMS3-11P Type IV, Class 2 specification.

For additional information please refer to the supplied documentation or contact us.

Anti-Slip coatings are designed to prevent slips, trips and falls. These coatings can be applied to a wide variety of surfaces, including floors, ramps, stairs, and walkways, improving safety in public areas such as parks, stores, and shopping malls, homes, businesses, schools, hospitals and other workplaces.

HOLCIM AMERICAN SAFETY TECHNOLOGIES® (AST) brand is a leading brand for Non-Skid/Anti-Slip solutions for use in a wide range of applications in Military (Marine), Commercial, Industrial, Residential, Hospitality, Medical & Municipal sectors. Their product portfolio includes military grade marine non-skid and deck coatings, industrial anti-slip coatings, primers & accessories famous for their toughness and reliability. More information on AST products is included in the Product Description section and the supplied documentation.

SHELL® TURBO® Turbine oils are premium quality lubricating oils designed to provide excellent lubrication of precision turbines and many other industrial applications. Made from severely hydroprocessed (API Group II) base oils carefully selected to provide satisfactory viscosity/temperature characteristics, low foaming tendencies and good water separation properties. In addition, they contain proven additives to protect equipment against rusting and to resist oxidation for long service life.

From high-temperature gas turbine systems to combined-cycle systems with integral gearing, the SHELL® TURBO® range of turbine mineral and  GTL (gas-toliquids) technology (*) oils are designed to protect the equipment from the effects of corrosion and to minimise the build-up of deposits and lacquer in turbine bearings and control valves.

Shell Turbo Oils T meet the American Standards Institute (ANSI)/American Gear Manufactures Association (AGMA) 9005-D94 requirements for R&O oils. They also coply with STLE Standards for machine tool lubrication include a classification for Hydraulic Fluid and General Purpose Lubricants.

The SHELL® TURBO® includes:

SHELL® Turbo T Mineral Turbine oils featuring reliable performance and protection. Available in ISO 32, 46, 68 and 100 viscosities.

SHELL® Turbo J Mineral Turbine oils  satisfying requirements of MHPS steam and gas turbines. Available in ISO 32 viscosity.

SHELL® Turbo S4 X and S4 GX GTL Turbine oils.The Turbo S4  X exhibits extended oil life and efficiency. Available in ISO 32 viscosity. The Turbo S4 GX is specifically formulated to provide additional protection for gearboxes in turbine systems that require enhanced anti-wear performance from oil . Available in ISO 32 and 46 viscosities.

For additional information please refer to the Product Description section and the supplied documentation.

(*) Shell gas-to-liquids (GTL) technology offering various benefits over traditional group II/III base oils such as a lower sulphur content than fluids derived from crude oil, a more uniform chemical structure, contributing to reliable performance and others.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates.

CHEMETALL® ARDROX® 185 Series colorless scale/rust removers have a greater than 12.5 pH level and a relative density of 1.43. The series includes 185L, a highly alkaline concentrated solution in water containing sequestrants and 185 water soluble powder offering a strong alkaline solution containing sequestrants. They can be used to remove rust and scale from iron and steel  in immersion tanks but also oil, grease and some air-dried paints.  They will not attack or cause hydrogen embrittlement in ferrous alloys and there is markedly less tendency for re-rusting to occur than with acid pickling.

ARDROX® 185L is usually used at a concentration of 30-50% by volume in water, depending on the amount of rust or scale to be removed. This corresponds to a concentration of 200 - 375 g/L of ARDROX® 185 in water. ARDROX® 185 must always be dissolved in cold water. There will be an exothermic reaction and the solution will heat up to 50-60°C / 120-140°F. The ARDROX® 185L is applied by immersion between 82 and 93°C (180 and 200°F). Agitate with mechanical agitation, do not use air agitation.

The immersion time will vary according to the degree of contamination, light rust being removed in approximately 10 minutes while heavy rust may take about an hour. If the components are heavily contaminated with oil or grease, the life of the ARDROX® 185L  bath will be prolonged if they are first degreased (e.g. with an ARDROX 6-series product).

When used in conjunction with the adequate other ARDROX® specialties (sold separately), ARDROX® 185L can be used to remove scale from hot-end jet engine components. It can also be used for cleaning parts made of titanium.

Thorough water rinsing must take place after the use of ARDROX® 185L. If no further immediate surface treatment is to follow, the use of a dewatering and protective fluid such as an ARDROX® 3-series is desirable to give protection from re-rusting.

The ARDROX® 185L  comes in a 5-gallon and 180-liter containers while the 185 powder in 25 kg bags.

Qualifications / Approvals:

SAE - ARP 1755B ( conformance )

CFMI - CFM56

Rolls Royce - CSS244 OMat

SNECMA - DMR 70-620

GE SPMC 70-80-04

Pratt Whitney - SPMC 70-12-00

Turbomeca

For additional information please refer to the attached documentation.

CONNTECT® produces and supplies combustion turbine fuel additives, compressor cleaners & wash systems and related products. CONNTECT® gas turbine compressor cleaners include CONNTECT® 5000, 6000, 7000 and CONNTECT® AF-100 anti-icing fluid for use with all CONNTECT® compressor cleaners. They are suitable for both ON LINE and OFF LINE use while ceaners can be injected directly into the compressor while the turbine is operating ON LINE extending periodic OFF LINE cleaning intervals and reducing average power loss. Available in 5-gallon pails, 55-gallon (208-liter) drums and 330-gallon re-usable and disposable bulk containers (totes).

CONNTECT® 5000 - concentrated water based gas turbine compressor cleaner specifically designed to remove deposits commonly found on gas turbine compressor blades.

CONNTECT® 6000 - concentrated non-toxic high performance low foam water based gas turbine compressor cleaner with cleaning efficiency similar to solvent-based cleaners.

CONNTECT® 7000 - concentrated solvent-based gas turbine compressor cleaner. The combination of non-ionic surfactants, emulsifiers and organic solvents is specifically designed to remove deposits commonly found on gas turbine compressor blades including carbonaceous deposits, oil, grease and soot. It should not be used undiluted.

The ash free ingredients in CONNTECT® cleaners have been carefully selected to ensure that no incremental trace elements can contribute to corrosion of the hot section of the gas turbine, while they contain special inhibitors to ensure compatibility with aluminum, nickel, nickel-cadmium, stainless steel, titanium and common coatings including painted surfaces and elastomers. They can be generally mixed at 1 part cleaner to 4 parts water but the method of injection and total amount of cleaning solution required differs for ON LINE and OFF LINE cleaning.

CONNTECT® AF-100 is a superior quality, specially designed propylene glycol based gas turbine anti-icing fluid for use with all CONNTECT® compressor cleaners. It is non-hazardous, non-toxic and biodegradable. High purity, ash free product insuring no incremental contamination of the hot section of the turbine.  Depending upon the percentage of AF-100 used, the freezing temperature of the cleaning or rinsing solution can be reduced down to -22 deg. F (-30 deg. C). However, its viscosity increases significantly at cold temperatures should not be mixed with cleaner or water when the  product is very cold.

Most airplanes nowadays are painted in vibrant colors, with designs and logos that need to retain their "fresh" appearance till repaint despite their operation in  harsh weather and environmental conditions. The types of paint used on arcraft are enamel and epoxy. For more information about these 2 types of paints please refer to the Product Description section.

PRODUCTS TEQHNIQUES INC. (PTI) is a manufacturer of chemicals, coatings and cleaners. PTI coatings product portfolio includes  over 131 coatings meeting military and federal specifications (MIL, MIS, ORD, TT, and FAA) and a number of proprietary formulations. PTI coating systems can be applied by spray, brush, dip, and aerosol. 

PTI trademarks & manufacturing license for worldwide sales of specialty coatings & solvents have passed to SOCOMORE S.A., a worldwide solutions provider in critical surface preparation, processing and protection in commercial aviation, defense, energy and industrial markets.The PTI product lines will remain unchanged, continue to be manufactured by PTI but they will be sold by SOCOMORE under SOCOGLAZE brand name.

SOCOMORE SOCOGLAZE TTE Series of enamel topcoats are high performance, single component enamel topcoats designed for interior use on high performance general aviation, business jet, and commercial aircraft and vehicles. These coatings are also excellent exterior coatings on substrates that are not subjected to harsh environments. TTE Series includes PT-381 (Gloss),  PT-382 (Semi Gloss) and PT-383 (Flat) enamel topcoats meeting and exceeding Military Specifications TT-E-489J, TT-E-529G & A-A-2962 and TT-E-527D respectively. Offered in bulk or aerosol they  can be applied over wood, composite or metal surfaces.  They can also be used on equipment, machinery, and metal parts as a high quality industrial enamel topcoat.

TTE topcoats are offered in 725 colors of US Federal Standard 595 (aka as SAE Aerospace Material Specification AMS-STD-595) used to identify and specify colors for military & civilian products. 595 colors are correlated to RAL, the European color coding system.

HAZARDOUS MATERIALS - UN1263, CL 3, III - Hazmat packaging & certification required. In addition, products in aerosol cans are generally prohibited to ship by air without Hazmat packaging & certification due to the possibility of combusting at high altitudes. 

For additional information, please refer to the supplied documentation or contact us.

NYCO HYDRAUNYCOIL® range of products includes mineral and synthetic fluids for hydraulic systems and circuits subjected to high and low temperatures, resistant to fire, extreme pressure and corrosion, and biodegradable. NYCO HYDRAUNYCOIL® fluids are shock-strut fluids. The main hydraulic fluids used in civil aviation are phosphate ester based fluids produced by Exxon-Mobil and Eastman Skydrol.

Different NYCO HYDRAUNYCOIL® hydraulic fluids are available addressing the requirements of specific sectors/applications:

FH & EL series for the Automotive & Industrial sectors,

FH 14 recoil and hydraulic system fluid

FH 19 recoil and hydraulic system fluid for Navy vessels

FH 51 hydraulic fluid used on all types of aircraft

FH 5 AW / 6 AW fluids dedicated to Boeing aircraft in operation, after overhaul and under storage. Also available for Airbus aircraft.

FH 42 synthetic shock strut fluid for new generation aircraft

FH 2 helicopter and fighter jet system fluid

Applications

Aeronautical: damping fluid for landing gears (initial assembly at the main OEMs), fluids for helicopters and combat aircraft, actuators, THS (Tail Horizontal Stabilizer), test bench, etc.

Military: mobile equipment, artillery, gun-mounts, tanks, missile hydraulics, etc.

Automotive: biodegradable hydraulics for public works, lifting and marine equipment, etc.

Industrial: dams, drill bits, etc.

For more information on NYCO HYDRAUNYCOIL® fluids please refer to the supplied documentation.

NYCO and ANDEROL® ROYCO® oils, greases, fluids and specialty products are used in aircraft of Russian and Ukrainian manufacturers meeting the corresponding specifications. Most of their products are included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

Turbine engine oils (abbreviated as TEOs), also known as jet oils, turbo oils are specialty lubricants designed to support the operation of turbine engines. Apart from their lubricating function of the engine,  gearbox, shafts and associated accessories, TEOs have two additional functions. Their various additives protect the components from corrosion, and filter contaminants in the engine such as carbon deposits (coking) while TEOs are also used as heat transfer fluids, cooling the engine in temperatures reaching 1000°C, in turn extending the life of the oil up to 25,000 hours of operation. TEOs have been initially developed as mineral and and subsequently innovated to synthetic.

Castrol™ 5000 is a 5 centistoke "Type II" synthetic lubricant designed for use in modern gas turbine engines operating at bulk oil temperatures exceeding those which "Type I" oils can successfully withstand. It  is a clear, amber-colored fluid having the appearance of a thin oil with a faint aromatic odor. It is based on a blend of high quality hindered esters and additives used to offer a product with excellent high temperature and oxidation stability, good load-carrying properties and complete compatibility with engine and accessory constructional materials, such as metals and elastomeric sealing compounds. 

Castrol™ 5000  is compatible with other MIL-PRF-23699F Std, 5 centistoke gas turbine lubricanrts such as AEROSHELL® 500, 560, EXXONMOBIL® Mobil Jet Oil II, EXXONMOBIL® Mobil Jet Oil 254, EASTMAN Turbo Oil 2380™ and others. However, it is unwise to mix grades of different viscosity.

Castrol™ 5000  oil  is not compatible with mineral oils and while it is miscible with phosphate ester hydraulic fluids, the latter will have a detrimental effect such as coking propensity and resistance to corrosion. 

For additional information and specifications please refer to the supplied documentation.

The TURBONYCOIL® product range of high-performance mineral and synthetic oils produced by NYCO are used in aircraft turbine (turbo-jet, turbo-prop, etc.) and piston engines, power units, turbo-reactors, APUs, starters, IDGs for aircraft, helicopters, naval vessels (aircraft carriers, frigates, etc.) and land equipment. Also used for aero-derivative turbines for land and sea applications (cogeneration, offshore power generation, gas compression). NYCO TURBONYCOIL® turbine oils are fortified with carefully selected anti-oxidant, anti-corrosion, anti-wear and extreme-pressure additives. TURBONYCOIL® oils are used in aircraft of many air forces (Mirage, Rafale, Eurofighter, F-16, F-22 and F-35) as well as on aircraft from Russian & Ukrainian manufacturers. 

Commonly used NYCO TURBONYCOIL®  products include:

TURBONYCOIL® 98: Synthetic turbine engine oil used on Russian-made aircraft

TURBONYCOIL® 160: Ester-based oil, specially designed to withstand high temperatures and remain fluid at very low temperatures

TURBONYCOIL® 321: 8 cSt mineral turbine engine oil for Russian-made aircraft

TURBONYCOIL® 3516: Mineral turbine oil designed for protection

TURBONYCOIL® 3560/3570: Single grade mineral oils for piston engines

TURBONYCOIL® 600: STD/SPC 5 cSt synthetic oil for turbojet engines

TURBONYCOIL® 601: 5 cSt corrosion inhibited synthetic turbine oil

TURBONYCOIL® 640: 5 cSt high thermal stability turbine oil

Many TURBONYCOIL®  products or their analogs by other producers are included in our offered product range and can be furnished on demand through our current network of co-operating suppliers. 

Please refer to the Product Description section, the supplied documentation or contact us for additional information and assistance.

LIQUI MOLY is Germany's most popular brand of motor oil. It is also one of the few full range brands in the world with more than 4,000 premium quality motor and gearbox oils, fuel and oil additives, care products, chemical problem-solvers and service products.

LIQUI MOLY MOLYGEN New Generation range of fully synthetic motor oils indicate their Molecular Friction Control (MFC) technology with their deep green visual signature. Tungsten, a key component in MOLYGEN oils, is a rare metal with an extremely high melting point used in many high-temperature applications. As an additive in LIQUI MOLY MOLYGEN oils, Tungsten leads to a significant friction reducation and a corresponding reduction of engine's wear and extension of engine life.  Less friction can also lead to reduced engine fuel consumption as less energy is required to overcome the internal losses. MFC technology in MOLYGEN New Generation oils leads to smoother engine running with optimum oil pressure, a long service life, and reduced fuel consumption and emissions. 

LIQUI MOLY MOLYGEN  New Generation motor oils are offered in some of the most common viscosities, including 0W-20, and 5W-20 through 5W-50. They are designed to meet or exceed standards including the latest from General Motors and those of BMW, Mercedes-Benz, Honda, Subaru, and more. A brief presentation of different oils in the MOLYGEN New Generation range is provided in the Product Description section. Please also refer to the supplied LIQUI MOLY Oil Guide on different applications.

Note: Supplied information is provided for reference only. For the selection of the suitable motor oil please observe the manufacturer's instructions.

A wide range of grease fittings (aka zerk fittings or grease nipples) are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. Sourced from quality manufacturers, they are competitively priced and can be furnished in different head types  (conical, button or flush head, drive-in or self-forming), straight or angled heads (30°, 45°, 65°, 67.5°, 90°) and thread sizes in metric or inch systems, depending on the selected fitting. Fittings are sold in pieces but mostly in packs a with specified number of fittings indicated after the letters "PK" in the product reference number (SKU). Fitting kits are also available with assortments of different fittings.

Our AVIATIONEU NEW ERA conical head grease nipples comply with DIN 71412, SAE J534 & IS 4009-2 standards. Hardness for nipple head: Min.550 HV. They are made from different materials,  EN 1AL(free cutting steel), 1SMnPb30+C,SAE 12L13 or stainless steel  303 & 316 with different surface finishes (clear/yellow/olive green zinc plated). Available with straight or angled nipples, tapered or parallel threads in different sizes:

Metric: from M5x0.8 to M16x1.5

British Standard Pipe (BSP): from 1/8"-28 to 3/8"-19

U.S. National Pipe Thread (NPT/PTF): from 1/8"-27 to 1/4"-18

U.S. ANSI/ASME B1.1 Unified National Thread - UNC Coarse series and UNF Fine series: from 1/4"-28 to 3/8"-24

Our AVIATIONEU NEW ERA button type round head grease fittings comply with DIN 3404 & IS 4009-1 standards.They are made from different materials,  EN 1AL(free cutting steel), 1SMnPb30+C,SAE 12L13 or stainless steel  303 & 316 with a galvanized surface treatment and different surface finishes (yellow/white zinc plated). Available with parallel threads in different head diameters (10, 16 & 22 mm head dia. )and sizes:

Metric: from M6x1 to M16x1.5

British Standard Pipe (BSP): 1/8", 1/4" & 3/8"

U.S. National Pipe Thread (NPT/PTF): 1/4" 

Our AVIATIONEU NEW ERA flush head grease fittings comply with  DIN 3405 standard.They are made from different materials,  EN 1AL(free cutting steel), 1SMnPb30+C or SAE 12L13 and  zinc plated. Available with parallel threads in different sizes:

Metric: from M5x0.8 to M12x1.5

British Standard Pipe (BSP): 1/8", 1/4" & 3/8"

U.S. ANSI/ASME B1.1 Unified National Thread - UNC Coarse series and UNF Fine series: 1/4"-28

For additional information please contact us.

ALLIANCE CHEMICAL is a distributor of a wide range of chemical products including acids, alcohols, aliphatics, bases, esters, glycols, ketones and napthas. Information on offered products is included in the Product Description section and the supplied documentation.

Αutomatic lubrication systems  (aka lubricators) provide the appropriate lubrication quantity at the correct intervals, minimizing friction and wear and optimizing bearing and machinery service life. Automatic lubricators are installed on single lubrication points and automatically dispense the proper amount of lubricant to the application. Especially when lubrication points are difficult to access for safety reasons or their location in the plant, automatic lubricators can offer the solution.  Lincoln (part of SKF Group)  automatic lubrication systems and accessories' portfolio includes Centro-Matic®‚ Quicklub®‚ Modular Lube®‚ Helios®‚ Duo-Matic® and ORSCO® brands offering a solution for most lubrication points. Main benefits from the use of   Lincoln automatic lubricators include:

Increased worker safety for lubrication of difficult to access lubrication points,

Maintenance efficiency with automated lubricant supply,

Improved machine reliability with optimized lubricant supply,

Selection of lubricators type and lubricant for application needs from a wide product portfolio.

For additional information please consult the supplied documentation.