For over 60 years, CHERRY® AEROSPACE Installation Tools have been specified and used by aircraft manufacturers and repair facilities throughout the world. Each CHERRY® AEROSPACE fastening system is combined with a full range of tools to provide an overall systems approach that ensures optimum compatibility and consistent installation performance. Used worldwide, Their tools are are manufactured to provide maximum service with minimum care. They are offered in a wide variety of hand, pneumatic and pneumatic/hydraulic versions, with optional accessories to permit their use in difficult and limited access areas. The size and type of fastener being installed dictates the type of tool to be used. All installation tools are manufactured at CHERRY® AEROSPACE's plant in Santa Ana, CA, USA.and they are CE Certified.

For additional information please refer to the supplied documentation or contact us.

Countersinking is used to ensure that flat head screws or fasteners sit flush against the workpiece. Countersinks used in aerospace and industrial applications are made of durable materials such as High Speed Steel (HSS) known for its hardness, toughness, and ability to withstand high temperatures. High Speed Steel (HSS) countersinks are well suited for cutting aluminum sheet metals. When combined with Cobalt, an alloying agent in steels to improve the hardenability, strength, and wear resistance in machining applications but also due to its ability to resist wear at higher temperatures, the  respective countersinks are often used for cutting stainless steel and other aluminum alloys.

Sourced from quality suppliers, integral (fixed) pilot Microstop countersink cutters are offered as part of our own labeled (AVIATIONEU NEW ERA) product lines. Made from HSS or HSS Steel with Cobalt, they consist ideal tools for aircraft manufacturers, aircraft maintenance/ repair stations or  industrial manufacturers for precise and accurate countersinking, cost-effective alternatives to other OEM products and and stocked by our suppliers for fast deliveries. 

Offered in different flutes, body and pilot diameters and sold  either separately (*) or in custom sets to address specific customer needs in machining applications.

Because of the difference in composition between HSS and Cobalt, main strengths of HSS countersinks are their high hardness and wear resistance. Therefore, as a general rule, they consist a better choice when you want your countersinks to retain their strength even when exposed to extreme wear or abuse. For higher hardenability, strength, and wear resistance and in applications when when countersinks are to be exposed to extremely high temperatures, cobalt countersinks should best be used.

AVIATIONEU NEW ERA countersinks can be used with popular adjustable or Microstop countersinking units utilizing a threaded shank drive (sold separately). For additional information please consult the supplied documentation or contact us.

(*) Minimum Order Quantities apply depending on the selected countersinks or their sets.

CELESA BLUE-MASTER self-tightening (keyless) industrial chucks for column or CNC drilling machines. Do not require a key for tightening or loosening. They incorporate a self-tightening feature that causes them to grip tighter as more torque is applied. Product line includes high precision (DC1), industrial (DC2) and industrial light-weight (DC3) chucks of different min/max openings of jaws, arbors (A), arbor diameters (D2) and chuck lengths (L1) in mm. Please refer to the illustrated models.

U.S. Air Tool Company Inc. (USATCO) is a manufacturer and worldwide distributor of high quality tools for the aviation industry. USATCO offered product range includes aerospace/aviation riveting as well as sheet metal and composite tools and accessories ( rivet squeezers, custom yokes, assembly tools and accessories, angle drill extensions, blind riveters, rivet guns, composite tools, and more. Their installation & removal tools for HI-SHEAR (Hi-Lok™, Hi-Tigue™,Hi-Lite™) fasteners (*) include straight and 20° offset ratchet wrench pneumatic driver assemblies, straight and offset mini pistol grip pneumatic driver assemblies, pneumatic installation & removal kits, ratchet & socket kits, reversible ratchet wrench installation kits, pin protrusion and grip gauges and more. USATCO Hi-Lok™ Pneumatic Installation & Removal Kit includes: Pneumatic 1/4" Square Drive Ratchet (with through hole), nine Hi-Lok™ Sockets (5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8" & 7/16"), four Hi-Lok™ Collar Removal Sockets (5/32", 3/16", 1/4" & 5/16"), three Hex Keys (1/16", 5/64" & 3/32") & fitted plastic case.

Installation/removal tools for Hi-Lok™ or Hi-Lok™ style fasteners made by  HS Tooling and Jiffy Air Tool are also offered. Pleae refer to the respective product presentations.

For additional information please refer to the supplied documentation or contact us.

(*) The HI-LOK™ fasteners from HI-SHEAR CORPORATION, subsidiary of LISI AEROSPACE, are the second most used fasteners in aircraft structural assembly after the solid rivets MS20470 and MS20426. The Hi-Lok™ fastener system includes a rivet pin (similar to a screw but with additional advantages) and a collar (similar to a nut).

Offered product porfolio of countersink cages & cutters from U.S Ait Tool Company (USATCO) includes an extensive range of High Speed Steel (HSS) & Cobalt  integral (fixed) pilot countersink cutters, Micro-Stop countersink cages & kits used in aerospace and industrial applications. High Speed Steel (HSS) countersinks are well suited for cutting aluminum sheet metals. When combined with Cobalt, an alloying agent in steels to improve the hardenability, strength, and wear resistance in machining applications but also due to its ability to resist wear at higher temperatures, the  respective countersinks are often used for cutting stainless steel and other aluminum alloys.

USATCO countersinks are offered in different flutes, body and pilot diameters and sold  either separately (*) or in custom sets to address specific customer needs in machining applications.

For additional information please consult the supplied documentation.

The BAUER™ electric drills from HARBOR FREIGHT TOOLS are offered in different cord and cordless (battery) models and are intended for use in diffrent applications. Their all-metal gear construction ensures heavy duty performance with daily use. They also feature high performance motors to cover drilling, and fastening jobs, a compact lightweight design to minimize user fatigue and textured overmolds for secure grip and comfort.  Cordless models are available as unit only or as kit with battery, charger and/or other accessories.

Model 189SC-B 20v Lithium-Ion Cordless 3/8 In. Right Angle Drill  is the perfect configuration for drilling between studs and joists or other close-quarters work. The balanced right angle design is compact yet delivers a variable speed range of 0-650/0-2000 RPM. The LED provides a clear view in dark spaces. Compatible with all BAUER™ 20v Lithium-Ion tools. 

Model 1791C-B1 20v Lithium-Ion Cordless 1/2 in. compact  Drill/Driver Kit features a 2-speed selector matching speed and poer to application. It comes with 1.5Ah battery, charger, 2 impact bits and a rugged tool bag.

Model 1695E-B  is a 13  Amp 2-Speed 1/2 in. Heavy Duty Right Angle Drill Kit features a 2-speed selector (450/1750 RPM), a low gear clutch and comes with  a rugged tool case.

ATS Pro-X rivet guns offer unmatched controllability when setting rivets of any type or size. They are used in aircraft manufacturing plants such as Boeing and Lockheed-Martin. With the improved variable power control, proper riveting can be accomplished with confidence.  Different models serve specification requirements (see attached table). 1/8" Aluminum (3/32" Steel) Rivet Capacity. These guns accept all .401 shank rivet sets and attachments. Non-slip Powder Coat Finish. 1/4" NPT Inlet. Lifetime ATS-Pro Warranty.

AVERY TOOLS (*) manufactures and supplies gauges for shop rivet heads and rivet lengths.

AVERY TOOLS rivet head gauges are offered as a set of four gauges for -3, -4, -5, & -6 rivets. Each gauge measures MINIMUM height and MINIMUM diameter of shop heads AFTER setting. Eliminates guessing if your rivets are properly set. Works for measuring both universal head and flush rivets. Precision machined to size from 2024 aluminum. Rivet size permanently stamped on each gauge. Color coded anodized finish.

A rivet length gauge is also available to check for proper length of rivets BEFORE setting and can be ordered separately or as kit with the head gauges. 

(*) AVERY TOOLS aviation tools and products are now available only through retail suppliers.

Rivet Pin Gauges from HI-SHEAR CORPORATION,  subsidiary of LISI AEROSPACE, can be used for inspection or measurement of correct grip length of HI-LITE™ / HI-LOK™ rivet pins. Different HI-SHEAR Pin Protrusion Gauges are offered for respective HI-LITE™ / HI-LOK™series pins. HI-SHEAR Grip Gauge Assemblies can be used to measure the “grip length” of HI-LOK™ and HI-LITE™ pins, shear lockbolts, structural screws and bolts. The HI-SHEAR 2-651 Grip Gauge Assembly includes one HI-SHEAR 2-612 Grip Gauge & one HI-SHEAR 2-615 Grip Gauge Slide. The 2-612 Grip Gauge measures in increments 1/16” to 3”(1 mm to 75 mm). Made from spring temper stainless steel, 3/4" x 6-1/4".

SNAP-ON® high-end tools and equipment are intended for professional use in the transportation industry including the automotive, heavy duty, equipment, marine, aviation, and railroad industries. Marketed under many different brands SNAP-ON® product portfolio includes premium hand tools, power tools, tool storage products (including tool control software and hardware), diagnostics, equipment and related accessories, electronic parts catalogs, warranty analytics solutions, business management systems and services, OEM specialty tools and equipment development and distribution, and OEM facilitation services.

CDI TORQUE PRODUCTS® (a SNAP-ON® brand) relates to professional grade torque products manufactured and sold more than anyone in the world. CDI's mechanical torque product lines include click type torque wrenches, dial indicating torque wrenches, torque limiting screwdrivers, calibration equipment and a number of special application torque products. CDI has long been a major innovator and a leader in electronic torque measurement and torque calibration equipment.

TechWrench® and TechAngle® electronic torque wrenches revolutionized the industry with easy-to-use, push button precision tools. TechAngle® wrenches combine the ability of electronic torque and angle wrench to complete precise "torque plus turn" specifications.

Other torque wrench products and equipment include ControlTech® industrial wrenches, TQ Series adjustable click-type, Torqometer® wrenches and drivers, angle gauges, screwdrivers, geared head and torque multipliers, testers, electronic bench Top Torque testers and  calibrator as well as pneumatic and cordless torques.

For additional information on SNAP-ON® product lines please consult the supplied documentation.

A complete spark plug gapping solution for field or bench use by AIRCRAFT TOOL SUPPLY COMPANY (ATS). Includes the Heavy Duty Spark Plug Gapping Tool to accurately set your spark plug gaps to within 0.001". Also included is an Electrode Erosion Gauge to make sure that your gapped plugs are still in serviceable condition.You also get a set of wire feeler gauges to verify gap size. In case of an accidental over-gap of the plug, the included Gap Expansion Tool will get you back on track. Compatible with all Champion, and AutoLite Massive Electrode Spark Plugs. The complete kit includes:

1 X Gapping Tool

1 X Feeler Gauge

1 X Erosion Gauge

1 X Gap Expansion Tool

The BAUER™ drill bits from HARBOR FREIGHT TOOLS are constructed from premium alloy material for maximum durability. Offered in sets in different shapes and coating materials according to their intended use. Some sets come packed in a rugged high-impact heavy duty case.

The 12LiS Cordless Screw Gun from AVIATIONEU NEW ERA product line is an irreplaceable assistant both in life, and on production. This easy, compact screw gun with a rated voltage of 12 V features:

- a speed of 0-350/1200 rpm, 

- boss size: 10 mm, 

- torque 15 nanometers, 

- 2 accumulators with capacity 2 Ach providing long time to perform required works, 

- battery built-in indicators to show when the accumulator needs to be charged

- rubberized handles. 

- one year manufacturer's guarantee

AVIATIONEU NEW ERA 12LiS Cordless Screw Gun is delivered in a convenient plastic case, with a set of 2 Li-ion accumulators, the accumulator charging device and a trial nozzle. 

Countersinking is used to ensure that flat head screws or fasteners sit flush against the workpiece. ATI® TOOLS High Speed Steel (HSS) integral pilot countersink cutters are manufactured of M2 high-speed steel or carbide-tipped. They can be used with ATI® TOOLS ATI444 or ATI443 Series microstops. Offered in different pilot diameters, number of flutes and body diameters. Sold in pieces or as sets with other countersink cutters.

Product Features:

High speed steel (HSS) countersinks ground on-centers to insure concentricity

1/2" Body diameter

Integrated pilot of different sizes in inches

2 Flute

120-degree seating angle for standard fit

100 degree cutting angle

1/4-28 Male threaded shank

Please consult the supplied documentation.

RUBIX GROUP is a leading distributor of industrial maintenance, repair and overhaul (MRO) products for mechanical maintenance, repair, production and manufacturing industry. CUTLINE rotary tools and ROEBUCK hand tools are exclusive brands of RUBIX GROUP.

CUTLINE product range includes among others drills. milling tools, taps, cutting tools and tool holders. ROEBUCK product portfolio includes among others wrenches & wrench sets, bolt-cutters, screwdrivers and screwdriver bits, knives and blades, pliers, clamps, hex and torx keys, sockets and socket sets,  tool storage and air tools.Roebuck products are designed and engineered to the same standards as more expensive alternative brands.

This tool is used to compress valve springs during valve removal and installation. It is ergonomically designed for shop and field use and comes with special pivot pin. Features alloy steel construction with black alloy conversion coating.

Ratchets, also known as ratcheting socket wrenches, have a handle and a drive end that connects to a socket that tightens or looses fasteners such as nuts and bolts. Ratchets come in different types such as Standard-Head, Flex-Head, Offset-Head  or Flex-Head to meet respective application requirements, in different drive sizes (1/4", 3/8", 1/2",1" etc.) with Quick Release versions.

PERFORMANCE TOOL™ Ratchets & Adapters by WILMAR LLC. are versatile hand tools used in a great number of applications. PERFORMANCE TOOL™ ratchets are offered in different Teardrop and Flex Head models for standard and heavy duty uses but also with extended length for extra leverage. PERFORMANCE TOOL™ Racheting Adaptors are offered for 3/8" and 1/2" drive sizes. 

Please refer to the Product Description and the supplied documentation for additional information or contact us.