An integral part of INNOSPEC Inc., INNOSPEC FUEL SPECIALTIES business unit is a leading developer and supplier of specialty additives for petroleum-based fuels, coal, and biofuels used in a diverse scope of applications.

Corrosion Inhibitor additives form part of INNOSPEC FUEL SPECIALTIES product lines. They are designed to protect against internal corrosion of fuel storage and distribution systems  and they are used extensively in storage, pipeline and aviation applications.They protect against storage vessel and pipeline leakage, contamination of fuel with particulates and blockage of filters and screens from corrosion material. 

INNOSPEC’s approved aviation fuel Corrosion Inhibitors/Lubricity Improvers (CI / LI) serve a dual function, they improve the fuel’s lubricity as well as protecting the fuel system against corrosion.Two products in the INNOSPEC’s DCI product range (DCI-4A and DCI-6A) hold numerous approvals for aviation fuel usesare approved for use in jet fuels. DCI-4A is a preferred inhibitor for aviation fuels while DCI-6A, a ‘stronger’ corrosion inhibitor than DCI-4A is preferred for all ground fuels and for pipeline corrosion protection, due to its low treat rate.

INNOSPEC's STADIS® aviation fuel Static Dissipators  aim to enhance safety by preventing static charge build up when refining or handling fuels. STADIS® 450 is a non-metallic distillate fuel additive that increases the electrical conductivity of distillate fuels and helps reduce hazards associated with mixing, transfer, and shipment of distillate fuels. It is is the premium static dissipator additive (SDA) in use today and  the only SDA approved worldwide for use in civilian and military aviation turbine jet fuels. STADIS® 425 is ntended for use in  ground fuel applications and specifically designed for use in applications such as diesel fuels and gas oil.

For more information please refer to the Product Description section and the supplied documentation. 

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA AVIATION HYDRAULIC FLUIDS & PRESERVATIVES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA engine oils and greases please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

ZET-CHEMIE® brand relates to a broad range of lubricants, cleaners and corrosion protection products for metal processing developed, manufactured and distributed by by ZET-CHEMIE GmbH for 30 years.

ZET-CHEMIE® water-miscible cooling lubricants are based on mineral oil-containing emulsion concentrates or mineral oil-free solutions. They have been used many years successfully for processing all kinds of materials. Their cutting and grinding oils are based on mineral or syntethic base oils and can be used in both chip and non-cutting metal machining processes. 

ZET-CHEMIE® corrosion protection products provide plants and components with the best corrosion protection depending on the application requirements.

ZET-CHEMIE® metal cleaners effectively address requirements for cleanliness of components in metalworking. 

ZET-CHEMIE® range of industrial lubricants can be used in a wide range of applications. 

HLP hydraulic oils feature good demulsifying properties, high stability against ageing and wear protection. They correspond to DIN 51524 Part 2. Available in the viscosity range ISO 2 – 150. HLP-D hydraulic oil conforms to DIN 51524 Part 2 with excellent detergent and dispersion features, plus wear protection. Available in the viscosity range ISO 68 – 150. 

CLP high-performance industrial gearbox oils are suitable for all industrial applications. They correspond to DIN 51517 Part 3. Their load stage is greater than 12. Available in the viscosity range ISO 5 – 680.

CGLP sliding track lubricating oils are suitable for tracks and guide rails. Their good demulsifying properties prevent them mixing with cooling lubricants. Correspond to DIN 51502 CGLP. Available in the viscosity range ISO 32 – 460.

VDL ZET-compressor oils with low evaporation losses and high stability against ageing conform to DIN 51506 VDL. Used in reciprocating and rotary lobe compressors according to the manufacturer’s instructions. Available in the viscosity range ISO 68 – 150. 

ZET-CHEMIE®  paraffin-based machine oils can be used for lubricating spindles in tooling machines. Transparent and resistant to oxidation. Available in the viscosity range ISO 2 – 32. 

ZET-CHEMIE® product portfolio also includes multi-purpose, fluid, bearing, high temperature and silicon greases in all NLGi classes and all container sizes from cartridges through to drums.Also car oils for petrol or diesel engines and trucks with EURO IV emission limits.

For additional information please refer to the supplied documentation.

Petroleum distillates include a range of products such as mineral oils, naphtha solvents, heavy fuel oils, waxes, benzenes and others used in many industrial and other applications. They are offered as part of our own labelled (AVIATIONEU NEW ERA) product portfolio or as OEM products (separately listed).

Naphtha Solvents are chemical product comprised of volatile and extremely flammable liquid hydrocarbons  derived from the refining of crude oil but can also be produced from natural gas condensates or petroleum distillates. Naphtha solvents are very strong and versatile, often used in hydrocarbon cracking, laundry soaps, and cleaning fluids among other applications. Those conforming to Mil-Spec TT-N-95 or its latest Rev. B (TT-N-95B) are aliphatic naphtha acrylic cleaning solvents available in Type I or Type II for use in organic coatings and as a cleaner for acrylic plastics. Usual packings include 1 USG cans, 5 USG pails or 55 USG drums.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA GREASES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA ENGINE HYDRAULIC FLUIDS & PRESERVATIVES and ENGINE OILS please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

SOCOMORE® produces waterbased and gel type aerospace cleaners which can be used for cleaning of aircraft exteriors and parts.  MAGCHEM® is a sister company of SOCOMORE® producing solutions for the preparation protection of metal surfaces or composite materials in the construction and maintenance of the transport industries including solutions for aerospace cleaning, surface preparation and metalworking processes. MAGCHEM® product range includes all-purpose cleaners, liquid detergents, paint removers, degreasing solvents, deoxidizers, and others.

For additional information and specifications please refer to the supplied documentation.

HUNTSMAN Advanced Materials is a leading global material solutions provider with a product portfolio of adhesives, composites and formulation products meeting demanding engineering specifications and customer-specific needs across a wide variety of industrial and consumer applications. HUNTSMAN ARALDITE® adhesives and ARADUR® curing agents form part of the company epoxy systems widely accepted and used in many industries.

For over 40 years, HUNTSMAN ARALDITE® adhesives have been the adhesive range of choice in a huge variety of industry sectors ranging from aerospace to sports goods. In recognition of the diversity of today’s industrial manufacturing and the many new materials available for product design, Huntsman offers an extensive range of ARALDITE® adhesives to meet your varied and exacting needs. The ARALDITE® brand encompasses high-performance epoxy, acrylic, and polyurethane adhesives and high-performance specialty epoxy and benzoxazine resin systems. ARALDITE® adhesive covers a broad range of applications and offers both production and performance benefits to industrial, consumer and construction markets.

HUNTSMAN ARALDITE® specialty thermoset resins are supplied in liquids or solids, and in a range of viscosities, functionalities and epoxy equivalent weights for a wide range of industrial applications, while ARALDITE® specialty epoxy resins are typically based on bisphenol-A, bisphenol-F, phenol novolacs, cresol novolacs, amino phenol, methylene dianiline, cycloaliphatics, and isocyanuric acid.

HUNTSMAN ARADUR® curing agents are supplied in liquid or solid form and can be used in conjunction with ARALDITE® epoxy resins to achieve a broad range of thermal, mechanical and electrical properties. This complete line of high-performance curing agents includes reactive polyamides, polyamido amines, aliphatic amines, cycloaliphatic amines, aromatic amines, anhydrides and novolacs.

HUNTSMAN ARADUR® markets & applications: Paints & Coatings, Wind, Aerospace, Electronics, Electrical Engineering, Composites, Construction, Adhesives.

For additional information on  ARALDITE® adhesives and ARADUR® curatives please consult the Product Description section, the supplied documentation or contact us.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates.

CHEMETALL® has developed and manufactures NDT products for Penetrant Testing (PT) and Magnetic Particle Testing (MT) applications as well as selected equipment related to NDT processes. The PT product range is represented by the well-known Ardrox® for the aerospace industry and Britemor® and Checkmor® brands specifically developed for the automotive, automotive components, energy and general industries. CHEMETALL® PT product groups include:

• Color-contrast penetrants

• Fluorescent/water-washable penetrants (oil-based, surfactant-based, water-based)

• Fluorescent/post-emulsifiable penetrants

• Penetrant removers

• Developers

ARDROX® 920A, 9721 and 9722 are water based, water-washable fluorescent penetrants suitable for the detection of defects open to the surface. Equivalent to different AMS 2644 sensitivity levels depending on the product.

ARDROX® 970P24E, 970P25E and 970P26E are biodegradable water-washable fluorescent penetrants offering a range of sensitivity levels approved to AMS 2644.

ARDROX® 970x series water-washable fluorescent penetrants are  based on latest surfactant technology (free of Nonylphenolethoxylate, short „NPE-free“). All products have low-odor, low toxicity and therefore a minimal impact on the environment.

ARDROX® 981x series high performance, post-emulsifiable, fluorescent penetrants feature low-odor, low toxicity, high flash point, minimal environmental impact and show significant performance improvements compared to older generation products. ARDROX®  9881 is a new hydrophilic emulsifier with improved odor control and bath stability.

ARDROX® Red Dye Penetrants include 907PB, water-washable and solvent-removable, 996PB solvent-removable and 9VF2, a high sensitivity azo-dye free fluorescent color contrast water-washable penetrant without aromatic hydrocarbons.

ARDROX® developers are based on very fine white powder with a defined particle size range and advanced absorption properties. They ensure superior white film background for better visibility of indications. They can be removed easily after inspection.

ARDROX® 9PRx are colorless, highly volatile, solvent based penetrant removers. Fast drying they have a low sulphur and halogen content. Mainly used for the removal of both visible red dye and fluorescent penetrants but can also be used as a solvent pre cleaner prior to the penetrant application for the removal of oil and grease.

For additional information on ARDROX® NDT products please refer to the attached documentation.

CASTROL® is a producer of oils, lubricants, fluids and greases for a wide range of applications. The company aerospace product range includes  lubricants, fluids and cleaners. Acquired by BP in 1992.

The CASTROL® BRAYCO™ product range includes world-leading choice synthetic oils and greases proven to perform in extreme environments increasing the lifespan of crucial equipment and delivering reliable performance in every critical application. Offered BRAYCO™ range of products features low outgassing and low volatility lubricants designed to virtually eliminate lubricant outgassing, Perfluoropolyether (PFPE) lubricants ideal for vacuum, cleanroom and reactive chemical environments and applications as well as formulations for deep sea applications that actually absorb low levels of seawater and carry it away from sensitive components.

For additional information on CASTROL® BRAYCO™ product portfolio please refer to the brief presentations included in the Product Description section and the supplied documentation.

AEROSHELL® brand relates to one of the most comprehensive and proven ranges of aviation lubricants in the aviation lubricants market worldwide. AEROSHELL® lubricants include aircraft piston and turbine engine oils, airframe and wheel-bearing greases, hydraulic fluids,  preservatives and other fluids. AEROSHELL® aviation lubricants are available in in different packaging options such as 55 gallon drums, 5 gallon pails, 1 US quart cans and cartons with 24 1 US cans each. A brief description of AEROSHELL® aviation lubricants is included in the Product Description section. Some of AEROSHELL® lubricants are already offered through our Web Platform for Supplies. Others, not currently listed, can also be furnished through our network of co-operating suppliers. For more information please refer to the supplied brief product catalogs and product descriptions,  the individual product presentations and corresponding documentation or contact us.

SHELL® extensive range of industrial lubricants, including their GTL (gas-to-liquids) technology oils, highlight the difference between industry standards and industry-leading performance. 

SHELL® range of industrial lubricants include lubricating oils for a variety of applications, hydraulic oils, coolants and greases.

SHELL® lubricating oils can be used on turbines (TURBO turbine oils separately presented), rotary and reciprocating compressors (CORENA), stationary gas engines (MYSELLA), power-generation (ARGINA & GADINIA), transformers (DIALA), axle, gear and transmission systems (SPIRAX ), slideways (TONNA), as bearing & circulating oils (MORLINA), process oils (RISELLA X) as well as for worm drive gears (OMALA). TELLUS hydraulic oils, Coolants and GADUS greases are also offered as part of SHELL® range of industrial lubricants. They are briefly presented in the Product Description section while further information can be obtained through the supplied documentation.

EXXONMOBIL® MOBIL™ SHC™ 500 Series oils include Mobil SHC™ 524, 525, 526 and 527 very high performance hydraulic oils formulated from synthesised, wax-free hydrocarbon base fluids combined with a carefully engineered super-stabilised additive system. 

They feature exceptionally high quality, wide-temperature, shear-stable hydraulic oils with controlled low-temperature pumpability properties and maximised anti-wear protection for high-pressure vane, piston and gear pumps. Their very high viscosity indexes contribute to their excellent low and high temperature performance making them an excellent choice for equipment subjected to a wide range of start-up and operating temperatures. They exhibit outstanding shear stability allowing their use in high-pressure, high-temperature operating environments for extended periods of time without the loss of critical lubrication characteristics. They reduce energy consumption by up to 6.2 percent compared to conventional hydraulic oils.

Features & Benefits of MOBIL™ SHC™ 500 Series Oils 

Design-Specific Synthetic Base Stock Extends service intervals | Cleaner systems and reduced close-tolerance valve sticking compared to conventional products | Improves filterability

Exceptional Anti-wear Reduces wear of components | Protects various metallurgy systems

High Viscosity Index Wide temperature range performance | Ensures equipment protection at cold start-up temperatures | Protects system components at high operating temperatures

Outstanding Oxidation Stability Provides long oil and equipment life extending filter life

Excellent Corrosion Protection Prevents internal hydraulic system corrosion | Reduces the negative effects of moisture in systems | Provides corrosion protection of multi-metallurgy component designs

Very Good Multi-metal Compatibility Optimizes inventory requirements

Meets a Wide Range of Equipment Requirements One product replacing several for optimization of inventory requirements and mitigation of product misapplication

Excellent Air Separation Characteristics  Reduces foaming and it's negative effects

Controlled Demulsibility Provides systems protection and lubrication where small quantities of moisture are present | Readily separates larger quantities of water

Innovative Keep Clean Properties Reduces system deposits and potential sludging | Protects critical components, improving system response and minimizing valve sticking

For additional information please consult the Product Description section.

LUKOIL® LUBRICANTS brand relates to an extensive range of lubricants serving the needs of applications in different markets worlwide, from passenger cars, commercial vehicles and small engines to aviation, marine and industrial uses. LUKOIL® LUBRICANTS portfolio includes among others motor oils, transmission, gear, compressor, turbine, gas engine, machine sideway, rolling mill, circulating, quenching oils, hydraulic and coolant fluids and greases. They are available in in different packaging options. 

A brief description of LUKOIL® lubricants  which can be furnished through our network of co-operating suppliers is included in the Product Description section. For additional information please refer to the supplied documentation or contact us.

Note: Supplied information is provided for reference only. For the selection of the suitable lubricant please observe the manufacturer's instructions.

AEROSHELL® produces a range of mineral and synthetic hydrocarbon hydraulic fluids, lubricating fluids and preservatives supporting airraft systems' operation and longer preservation.  A non-exhaustive list of offered products is presented below. Additional information is available in the Product Description section. Due to the continuous expansion of our offered product portfolio some AEROSHELL® products may not be listed yet in our Web Platform but they may still be offered through our supply network. Please contact us for additional information or assistance.

AEROSHELL® Fluid 3, general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. 

AEROSHELL® Fluid 12, synthetic ester oil used for general aircraft lubrication as well as for aircraft gyro instrument gimbal bearings, separately lubricated high speed turbines and compressors, aircraft air cycle equipment and electronic equipment. Particularly suitable when an oil with a low evaporation rate is required at high and low temperatures. Approved to MIL-L-6085C.

AEROSHELL® Fluid 31, synthetic hydrocarbon based aircraft hydraulic fluid with greatly improved fire resistance characteristics when compared with conventional petroleum products. Approved to MIL-PRF-83282D.

AEROSHELL® Fluid 41, mineral oil based  "super clean" hydraulic oil manufactured to a very high level of cleanliness and possesses improved fluid properties. It is suitable for use with brake and hydraulic systems with synthetic rubber seals.

AEROSHELL® Mineral Fluid 5M-A, highly refined, medium viscosity mineral oil with an extreme pressure additive and additives for good oxidation and corrosion protection. No longer produced. Limited availability till stock exhaustion. A possible alternative could be NYCO Nycolube 3525 meeting the same specification MIL-PRF-6086F.

AEROSHELL® Fluid 61, synthetic hydrocarbon base hydraulic fluid specifically inhibited to provide excellent oxidation stability for the oil. Approved to MIL-PRF-46170 Type I.

AEROSHELL® Fluid 602, synthetic hydrocarbon coolant fluid for aircraft electronics. No longer produced. Limited availability till stock exhaustion. Consider CASTROL® BRAYCO™ 889 meeting same specification MIL-PRF-87252E .

AEROSHELL® Fluid 71, preservative mineral hydraulic fluid of improved cleanliness. It is composed of a mineral base oil with an additive package which results in a product with excellent corrosion preventative properties as well as excellent oxidation stability, and good anti-wear characteristics.

Manufactured by RADCO INDUSTRIES, RADCOLUBE® is an exceptional 3-in-1 Gun Oil for cleaning, lubricating, and short-term preservation of small and large caliber firearm platforms making their maintenance safe & convenient . With its advanced formulation and adherence to industry standards, this gun oil guarantees superior performance, reliability, and longevity for firearms used in diverse environments. It is the trusted brand of the US Military, Law Enforcement, and Competitive Shooters across the globe. RADCOLUBE® CLP Gun Oil 3IN1 is also the preferred firearm cleaner and lubricant of The Tactical Games™ (TTG) , Multi-Gun Competitors, Extreme Long Range Shooting Organization™ (ELRSO) and King of 2 Mile™ (KO2M) shooting organizations.

RADCOLUBE® CLP keeps small & large caliber weapons in optimum condition and can be used in harsh environments, including cold, salt & dust. It maintains maximum firing performance maintaining any weapon’s maximum firing rate without incident.

Being a Military-Grade CLP gun cleaner and lubricant, RADCOLUBE® CLP  addresses all aspects of the cleaning process, simplifies firearm maintenance, adheres to MIL-PRF-63460F specifications and meets the qualifications of DOD.

RADCOLUBE® CLP has a maximum recommended shelf life of 6 years from date of manufacture.

For additional information please consult the supplied documentation.

CONNTECT® produces and supplies combustion turbine fuel additives, compressor cleaners & wash systems and related products. CONNTECT® gas turbine compressor cleaners include CONNTECT® 5000, 6000, 7000 and CONNTECT® AF-100 anti-icing fluid for use with all CONNTECT® compressor cleaners. They are suitable for both ON LINE and OFF LINE use while ceaners can be injected directly into the compressor while the turbine is operating ON LINE extending periodic OFF LINE cleaning intervals and reducing average power loss. Available in 5-gallon pails, 55-gallon (208-liter) drums and 330-gallon re-usable and disposable bulk containers (totes).

CONNTECT® 5000 - concentrated water based gas turbine compressor cleaner specifically designed to remove deposits commonly found on gas turbine compressor blades.

CONNTECT® 6000 - concentrated non-toxic high performance low foam water based gas turbine compressor cleaner with cleaning efficiency similar to solvent-based cleaners.

CONNTECT® 7000 - concentrated solvent-based gas turbine compressor cleaner. The combination of non-ionic surfactants, emulsifiers and organic solvents is specifically designed to remove deposits commonly found on gas turbine compressor blades including carbonaceous deposits, oil, grease and soot. It should not be used undiluted.

The ash free ingredients in CONNTECT® cleaners have been carefully selected to ensure that no incremental trace elements can contribute to corrosion of the hot section of the gas turbine, while they contain special inhibitors to ensure compatibility with aluminum, nickel, nickel-cadmium, stainless steel, titanium and common coatings including painted surfaces and elastomers. They can be generally mixed at 1 part cleaner to 4 parts water but the method of injection and total amount of cleaning solution required differs for ON LINE and OFF LINE cleaning.

CONNTECT® AF-100 is a superior quality, specially designed propylene glycol based gas turbine anti-icing fluid for use with all CONNTECT® compressor cleaners. It is non-hazardous, non-toxic and biodegradable. High purity, ash free product insuring no incremental contamination of the hot section of the turbine.  Depending upon the percentage of AF-100 used, the freezing temperature of the cleaning or rinsing solution can be reduced down to -22 deg. F (-30 deg. C). However, its viscosity increases significantly at cold temperatures should not be mixed with cleaner or water when the  product is very cold.

SOUTHWESTERN PETROLEUM LUBRICANTS LLC. (SWEPCO) is a manufacturer of technologically advanced lubricants that protect equipment assets in even the most severe operating conditions while helping companies around the world reduce overall operating costs through increased uptime and productivity and lowering maintenance and lubrication expenses. SWEPCO brand lubricants and specialty compounds are used in a wide range of applications serving the needs of Construction, Mining, Manufacturing, Marine &Transportation industries. For additional information on SWEPCO products please consult the Product Description section and the supplied documentation.

UTC AEROSPACE GOODRICH® Care & Maintenance product portfolio includes a range of different products. 

GOODRICH® ShineMaster™ Prep is a deep-cleaning surface treatment that prepares de-icers for the ShineMaster™ luster. It cleans the de-icer and removes residual coatings as the first step in the de-icer care process. Removes dirt, grease, oil, silicone products and other contamination as well as residual ShineMaster™ cosmetic polish before reapplication. The only cosmetic treatment system approved for use on Goodrich de-icers. As a secod step GOODRICH® AgeMaster #1 rubber preservative can be used  that replenishes the emollients destroyed by ozone and protects against weather. For use on neoprene de-icers only. GOODRICH® ShineMaster™ cosmetic coating can then be applied as the third step in your de-icer care process. ShineMaster™ offers de-icers a lustrous shine and cosmetically enhances de-icers by coating the exterior surface. This cosmetic treatment is easy to apply, dries quickly and provides a long-lasting shine.

For additional information please consult the supplied documentation.

ANDEROL® ROYCO® brands  of LANXESS Corporation are global leaders in lubricants with a diverse portfolio of engine, turbine,marine oils, gear,pump and bearing oils, greases, hydraulic, compressor, aviation, finished, metal working and general industrial fluids, specialty and Mil-SPEC lubricants and base stock. ROYCO® hydraulic, coolant & other fluids are offered in different packings (1 US quart cans, carts of 24 1 US cans,5 USG pails,55 USG drums, etc.).

ROYCO® 308CA  General purpose, Water-Displacing Lubricating Oil and Preservative. Meets all requirements of MIL-PRF-32033.

ROYCO® 602 Cooling Hydrogenated Polyalphaolefin Syn Hydrocarbon Fluid. Composed of a highly branched, compact and very stable synthetic hydrocarbon (polyalphaolefin,PAO). 

ROYCO® 634E Advanced Weapons Cleaner, Lubricant & Preservative. Meets MIL-SPEC MIL-PRF-63460 rev. F.

ROYCO® 756/756A Mineral Oil Based Hydraulic Fluid for Aircraft, Missiles and Ordnance.

ROYCO® 757 Low Viscosity Mineral Based Fluid for use as an operational fluid for missile systems, aircraft, and Unmanned Aerial Vehicles (UAV).

ROYCO® 770 Synthetic Fire Resistant Hydraulic Fluid. Super clean synthetic hydraulic fluid for use in tank and howitzer recoil mechanisms and hydraulic systems, snow removal, earth moving and heavy duty construction equipment, and industrial robotic hydraulic systems.

ROYCO® 782 Synthetic Fire Resistant "Super Clean" Hydraulic Fluid for severe duty military and industrial equipment.

ROYCO® 783 Mineral Based Preservative Hydraulic Fluid recommended for use in aircraft, missile, and ordnance systems using synthetic sealing material as well as heavy duty construction equipment, and industrial robotic hydraulic systems.

ROYCO® 950 Calibration Fluid specifically curated for fuel system components used in both reciprocating and gas turbine aircraft.

ROYCO® HF-825 Acryloid Synthetic Assembly Fluid & O-Ring Lubricant.  A concentrated solution of methacrylate polymer in synthetic diester based oil providing lubricity, and a "tacky" film.

ROYCO® LGF Landing Gear & Strut Fluid. A mineral oil based hydraulic fluid designed specifically for use in aircraft landing gear systems shock struts and other fluid dampening systems. 

ANDEROL® ROYCO® and NYCO oils, greases, fluids and specialty products are used in aircraft of Russian and Ukrainian manufacturers meeting the corresponding specifications. Most of their products are included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. Please contact us for additional information and assistance.

ZOK are powerful water-based gas turbine compressor cleaners and corrosion inhibitors produced by SOLIDUS INDUSTRIES. ZOK products are also offered with pH neutral and an effective corrosion inhibitor (ZOK 27) and with a higher pH without the added corrosion inhibitor (ZOK MX) for more challenging cleaning requirements. Originally developed for the UK Ministry of Defence over 40 years ago, ZOK 27 is used all over the world today within the Aviation, Marine, Power Generation, Oil and Gas and Industrial sectors. Regular on-line and off-line washing with ZOK 27 produces outstanding results in gas turbine engine performance: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – ultimately maximising the ROI on gas turbines.

ZOK 27 products are offered in two standards (ZOK 27 and ZOK 27 GOLD. The latter includes neutral, biodegradable, water-based gas turbine compressor and gas path cleaners specially formulated with plant based surfactants to meet ecological sustainability.

SOLIDUS INDUSTRIES ZOK 27 Gold Standard have been designed to meet the requirements of the OSPAR Convention for reduced environmental impact in sensitive marine environments, such as the North Sea. This scheme is administered by Cefas in the UK. They consist the perfect solution for maintaining peak performance of gas turbine compressors operating in ecologically sensitive environments. Regular on-line and off-line washing with ZOK 27 Gold Standard produces outstanding results: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – all this while minimising  environmental footprint.

ZOK 27 and ZOK 27 Gold Standard  are available as CONENTRATED (CNCTR) and READY TO USE (RTU) product versions in different packing options, 12.5 liters (3.3 USG) cans, 25 liters (6.6 USG) cans, 210 liters (55 USG) drums and 1000 liters (264 USG) IBC containers.

ZOK 27 READY TO USE (RTU) versions are intended for users who do not have access to demineralised water. CONENTRATED (CNCTR) vesrions can be diluted 1 to 4 with water before use (20% solution). Demineralised water (<11μS/cm conductivity) should be used for hot/on-line cleaning. Good quality drinking water (<500μS/cm conductivity) may be used for cold/off-line cleaning.

Please also refer to the attached documentation for additional information on these products.