HONEYWELL BENDIX KING® manufactures a range of TSO'd VOR/LOC/Glidescope indicators. These navigation instruments include VOR/LOC left-right needles, To-From indicator, VOR/LOC warning flag, glideslope deviation needle, glideslope warning flag and 30Hz OBS resolver. Depending on the model, the feature rectilinear instead of pendulum type meter movements for more precise indicator readings, 14/28 volt internal lighting, metal bezel with glass lens and course datum synchro for autopilot use.

These indicators are commonly used with BENDIX KING® remote mounted VOR/LOC converters such as KN-72 or KN-77, remote mounted Glideslope Receivers such as KN-73 or KN-75, KNS-80, KNS-81 nav systems and KX-155/KX-165 NAV/COMM transceivers.

The KI203 model features an internal VOR/ LOC converter and it is compatible with the BENDIX KING® KX155 transceiver. It has a rectilinear meter movement. Compatible with the BENDIX KING KX155 NAV/COMM transceiver.

The KI 204 VOR/LOC/Glideslope Indicator features a built-in VOR/LOC converter and scallop rejection filter, rectilinear needle movement and an optically coated glass lens. Requires input from external glideslope receiver. Compatible with the BENDIX KING® KX 155 or KX 155A NAV/COMMs. Requires input from external glideslope receiver.

The KI 206 VOR/LOC/Glideslope Indicator is rectilinear and internally lighted. It is used with the KNS 80/81 units, KX 165  transceiver and the KNR 634 VOR/LOC/GS/MB receiver. It is available with course datum synchro.

The KI208 model features a built-in VOR/ LOC converter and it is compatible with the BENDIX KING® KX 155 or KX 155A NAV/COMMs. It has a  pivoted needle action and a plastic lens.

The KI209 model features an internal VOR/ LOC converter and it is compatible with the BENDIX KING® KX155 transceiver. It features a pivot needle action.  The KI209 model includes GPS interface capability.

UMA line of precision electronic pressure senders feature precision, solid state sensors and circuitry to give unequalled performance and are designed for rugged use in just about any environment.  They are offered in TSO'd and Non TSO'd models and gauge, differential and absolute types. UMA TSO'd electronic pressure senders are the most economical TSO’d units on the market. They are compatible with avgas, jet fuel, engine oil and many other fluids. Because they have internal voltage regulation, they are compatible with indicating instruments that do not have precision output voltages. Units for fuel and oil pressure are certified under TSO C47. Units for manifold pressure are under TSO C45a. For additional information please refer to the attached documentation.

AIRPATH certtified (FAA TSO) Magnetic Compasses are used in almost all production aircraft. They are offered in in different panel mount and pedestral models,  lighted or non lighted versions, black & white markings, black finish, and capabilities for operations in South or North Hemisphere. 

AIRPATH C2300 panel mount magnetic compasses fit in a 2.25 in. hole and need 3 in. of clearance from behind the panel. Offered Models(*): C2300, C2300-SF, C2300-L4, C2300-L4-SF.Compass fluid is included inside the units and come with the mounting screws and nuts required for their installation. A compass deviation card and card holder can be ordered separately. 

AIRPATH C2400 series pedestral magnetic compasses have been specifically designed for installation either for streamline-type bracket housing or a pedestal-type housing. Wire lead length, voltage, and lighting color are specified under each respective part number. Each model is provided with mounting hardware, deviation card, deviation card window and either an attached cardholder, deviation plate, or standard unattached cardholder depending on the application. All compasses in the C-2400 series meet FAA TSO-C7c requirements and are offered in different versions for operations in South or North Hemisphere. They fit in a 2.25 hole. Lighting: Red 12 VDC. Meet FAA TSO-C7c requirements.

(*) Letter “L” after the dash in the part number indicates a lighted version. Letters “SF” indicate South Hemisphere.

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality.

FALCON GAUGE Non Certified Airspeed Indicators have been one of the most chosen flight instruments by fixed wing airplanes, helicopters and ultralights. The great advantages of these gauges are excellent slow speed characteristics, very progressive increments, a variety of ranges, light weight, short length, and affordable price. FALCON GAUGE Airspeed Indicators ranging up to 80 MPH, 100 MPH, 120 MPH and 150 MPH make for excellent MPH increments for helicopters and ultralight aircraft. All FALCON GAUGE Airspeed Indicators are housed in an aluminum case and consist of all metal parts. They come in 2-1/4" and 3-1/8" sizes. Available ranges: MPH, Knots, KPH; single range or dual range readings. Optional: Custom color range markings can be special ordered. For additional information please refer to the supplied documentation or contact us.

KANARDIA INDU Series G-Meter gauges form part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters. They feature a LCD display with possibility to personalise the displays and scales. They are offered as standalone (master) or as slave gauges. Slave versions require some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the bus. These G-Meter gauges  are available for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15").

KANARDIA INDU Series round Vertical Speed Indicators (Variometers) are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters. They feature an LCD display with possibility to personalise the displays and scales. They are offered as standalone (master) VSIs with internal pressure sensors or as slave instruments. The slave version requires a master altimeter or some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the CAN bus. KANARDIA INDU Series round altimeters are available for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15").

Scale Ranges:

-M scale in meters per second (-10, 10)

-FT scale in feet per minute (-2000, 2000)

-KTS scale in knots (-20, 20)

GARMIN GI-106B TSO'd panel-mounted CDI is a high-quality course deviation indicator which includes a VOR/LOC/GPS needle as well as a glideslope needle, that can be hidden and disabled by an installer if the glideslope functionality is not needed. The GI 106B contains LED-lit GPS, NAV and VLOC mode annunciators, for an easy-to-read and modern look. TO/FROM annunciators are also LED, and when invalid, the needles are simply hidden out of the pilot’s view instead of using conventional invalid flags. The GI 106B replaces existing Garmin GI-102A & GI-106A models. It is compatible with the same pinout connections as the legacy GI 102A and GI 106A course deviation indicators, allowing for an easy upgrade path. It also features anti-reflective lenses and LED flood lighting for viewing at night.

The FAA TSO'd RCA26AK (14V) and 26BK (28V) series of electric attitude indicators (artificial horizons) by KELLY MFG (RC ALLEN) are known for their dependability and ruggedness. They incorporate tremendous advances in presentation, precision, and reliability.With a proven track record for dependability and ruggedness, the attractive new extended color schemes and ultra-precise spherical presentation (eliminating old parallax problems) they set a new standard for safety.These gyros provide a more accurate IFR reference for the beginning instrument pilot or a Cat II captain. A new three phase motor/inverter is designed into the gyro enabling it to operate at lower temperatures which extends to useful life. The instruments employ a new, high precision air erection system which provide erection torque for maintaining a proper vertical alignment reference. The erection air is supplied by a turbine pump which is integrally coupled with the gyro motor. Through maximum utilization of unitized construction the design is free of resonant frequencies below 100 HZ and thus cannot respond to low frequency disturbances which can cause dither and premature wear out of the unit. The display portion of the instruments has a directly coupled roll movement, and a pitch movement mechanism identical to that of the field proven vacuum gyros produced by R.C.Allen since 1966. A "pull to cage" spring type force limited mechanism assures immediate alignment and stability whenever power has been applied to the gyro, a feature non-existent on vacuum driven gyros. These artificial horizons have a hybrid inverter which converts the aircraft DC power to the required voltage and frequency for motor operation. All units have a pull cage knob and a power failure flag that drops into view whenever the supply voltage is lost or when the voltage has dropped below a level of acceptable for proper operation of the gyro. Slip indicator can be added to satisfy FAA AC91-75 upon request. Available in 14V or 28V voltage versions with fixed or movable pointer, lighted or unlighted, power failure flag, panel tilt and optional inclinometer. Mating connector MS3116E8-4S and panel screws are now included with each new instrument at no extra charge.

Dimensions: 3.38"W x 3.38"H x 8.14"L

Weight: 2.3 lbs.

Range of special accessories by FRANZ AIRCRAFT ENGINES for use in BRP-ROTAX® aircraft engines and other applications.

 Automatic flight control systems (AFCS) are aircraft autopilot systems with many integrated features initially found only on high-performance aircraft but nowadays installed on modern aircraft of any size. Their capabilities vary from system to system with some AFCS offering advanced features beyond ordinary autopilot systems regarding programmability, the level of integration of navigational aids, the integration of flight director and autothrottle systems, and combining of the command elements of these various systems into a single integrated flight control human interface.

LEONARDO HELICOPTERS provides aircraft manufacturers with solutions ranging from single axis or secondary flight control computers and electronics to complete integration of flight control systems. The flight control system architecture spans from simplest architecture, lowest complexity up to full authority fly-bywire architecture, offering the following advantages:

• Compatibility with various actuation technologies (Hydraulics, Mechanical, Electro-Mechanical)

• Eased certification process (EASA Form 1 already achieved)

• Reduced integration cost and schedule risk (building blocks)

The Flight Control Systems (FCS), used to control the control surfaces of the aircraft, are based on:

• Flight Control Computer (FCC)

• APSW (Autopilot).

• Building blocks of dual, dual-duplex, triplex and quadruplex FCS architecture. 

Apart from new, LEONARDO older FCS are also offered in NEW SURPLUS or USED conditions (Serviceable or Overhauled). For additional information please consult the supplied documentation or contact us.

UMA NON TSO'd Electronic Amp Meter Gauges (Ammeters) are available in different series for different measurement ranges and installation in different panel hole diameters. 1-1/4" series allow utilization of panel space without compromising readability. They can be powered from 14 or 28 volts. Signals are acquired from remote mounted sensors, processed and displayed on analog dials with easy to read markings. Each gauge uses rugged aircore meter movement for vibration resistance and repeatability. Each gauge can be placed in a 1-1/4” diameter hole and mounted behind the panel with (4) 6-32 screws. They can be cluster mounted as close as 11/2” centers. Also available as new manufacture electric with 2-1/4" dia. Other UMA series of electronic ammeters include 2-1/4" series with moving coil and 85° Sweep and 2-1/4" Dual Amp/ 0-30 volt meters with moving coil  and 85° sweep.

NOTES:

These ammeters come with the suitable shunt. Different shunts are used depending on ammeter part number.

All Part Numbers beginning with the letter "T" are TSO'd for Certified Aircraft.

Amphenol MS MIL-C-5015 Circular Plug Connectors are designed to meet the demanding performance requirements of military standards. These cable mount circular plug connectors have proven electrical capability for equipment applications where durability is important. The Amphenol plugs have threaded couplings and single key/keyway shell polarization for an accurate and reliable connection. The solid shells of these MS Series circular MIL-C-5015 connectors are made from high grade aluminium alloy. The shells are electrically zinc plated with an olive drab chromate finish which ensures a high resistance to corrosion. The inserts of these military circular connectors are made from resilient synthetic rubber which offers a high dielectric strength and resistance to vibration.

The MS3106A-10SL-3S plug can be used with Turn Coordinator TC02E-3-2 or Turn & Bank Indicator TB02E-2-1.

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality.

FALCON GAUGE Electrical Attitude Gyro is intended for use in experimental aircraft only. It provides a continuous visual display of the aircraft attitude with respect to the earth for maneuvering around the longitudinal (pitch), and lateral (roll) axes, and yaw. A precision AC brushless motor is featured in the electrical attitude gyro. The Power failure drops into view whenever the power is insufficient for operation of the gyro. Electrical gyro can be caged by pulling the "Pull to Cage" knob. It is offεred with or without internal lighting and is designed to work with a 12V system. Dimension: 3-3/8"X 6.46/164mm.

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality. 

FALCON GAUGE G-Meters (Accelerometers) measure G forces acting on the airframe during turbulent or aerobatic maneuvers. One pointer provides a continuous reading, the other two indicate maximum positive and negative loads. FALCON G-Meter models are mechanical and offer precision, accuracy, and durability. They are also easy to operate. No wiring necessary. The units come with the locking knob set to the locked position.  Do not press the reset button until after moving the locking knob to the unlocked position.

FALCON GAUGE GM510-2 G-Meter is a standalone 57 mm (2 1/4") unit which fits a standard 2 1/4" instrument cutout. 

Product Features and Specifications:

• G-Meter, -5 to +10 g

• Operation Temperature: -55º to +60°C

• Dimensions: 61 mm (2 1/4") x 61 mm x 108 mm (3.5")

• Complies with Standard : MIL-A-5885C

Please refer to the supplied documentation for additional information.

Note: FALCON GAUGE GM510-2 G-Meter is currently not available. Availability in NEW condition depends on existing stocks and is limited.

These precision quartz electric aircraft clocks are constructed for easy installation in a wide variety of replacement applications for home builts. The rugged quartz movement is accurate within 2 sec. in 24 hrs under normal operations and runs accurately in temperatures from -30º to 180ºF. Available in 14 Volt or 24 Volt versions.

Product Specifications:

OD: 2-1/4"

Depth: 2"

Weight: 4 ounces

UMA Non TSO'd airspeed indicators are offered in 2-1/4" and 3-1/8" Single (MPH) and Dual Range (MPH/Knots) versions for installation on experimental aircraft only. They are housed in Valox 420 plastic cases and weigh 8.6 oz. . Depending on the selected indicator, ranges are in MPH, Knots or kilometers. Some inicators are also offered as certified (FAA TSO'd) units. Standard dial markings are black and white. Optional custom range markings and optional internal lighting(*) are also offered upon request at additional cost. Please indicate the markings option (if markings are required) and lighting option at the time of ordering. 

(*) Note: An inverter is required for the Internal Lighting Option.

KANARDIA INDU Combo IAS/Altitude/Vertical Speed Indicators are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters.They feature an LCD display with possibility to personalise scales and LCD displays. They are offered as standalone (master) or as slave gauges. Slave versions require some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the bus. KANARDIA INDU Combo IAS/Altitude/VSI gauges are available for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15"). Arc colors need to be specified  at the time of order.

The STRATOMASTER VEGA range instruments/indicators from MGL AVIONICS includes different 2 1/4" (57mm) microprocessor based color display instruments operating over a wide supply voltage range of 8 to 30V DC with with built in reverse and over voltage protection. They are non certified and only suitable for installation in experimental and sport  (LSA) aircraft. Using a high resolution color graphics display, these instruments/indicators provide excellent daylight readability with built in backlighting making them easy to read at night time. They include a rotary control plus 2 independent keys for easy menu navigation and to access specific instrument features. Sensors are also offered to enhance their functionality. The MGL AVIONICS STRATOMASTER VEGA Series instruments/Indicators include: Artificial Horizon & Magnetic Compass Display, Altimeter/VSI, ASI, ASI/VSI, Engine Monitoring System (EMS), Fuel Computer, Information Display, Manifold Pressure, Température, RPM, Hobbs, Universal Engine/Rotor RPM, Hobbs, 4-Channel Thermocouple (EGT/CHT), 4 Channel Universal Analog Input (Pressure/Temperature/Voltage/Current) and NAVCOM Control head for MGL N16 NAV/COMM or V16 COMM VHF.

The smartPlane system by Guardian Avionics is an iOS-based Multifunction Display (MFD) and Flight Data Recorder (FDR) system with voice command capability for Part 23 FAA certified aircraft. It has been designed as a budget-friendly general aviation multifunction display option while collecting, storing, and displaying flight and performance data. smartLink 4 different units (554, 555. 650, and 851) can be used to connect select EFIS, GPS, and engine monitors for data collection & transmission to Guardian Avionics smartMFD iOS application by USB or Bluetooth.All smartPlane product line units additionaly feature Carbon Monoxide detection, Real-time Aircraft Tracking, Pilot Logbook, Aircraft Flight Logs, and Discrepancy Reports (squawk list). They are FAA approved  for installation in FAA Certified Part 23 aircraft under the NORSEE (Non-Required Safety Enhancing Equipment) authorization.

Guardian Avionics smartPlane EM100 Flight Engine Monitoring System can be remote mounted and integrates with smartLink 851 via RS-232 which in turn communicates with smartMFD iOS app through an iPad and/or iPhone via a USB connection. This results in iPad and iPhone becoming multifunction displays of rich flight and engine performance information which is also stored by the smartMFD app and can be shared with others, as required.

The EM100 includes 3 main connectors (J2 Female 37P DB, J3 Male 37P DB, J4 Female 15P HD) on the back of the unit. Every connector is defined to specific sensors for specifics engine measurements. Sensors are not included as part of EM100 unit and havee to be supplied separately. Engine parameters monitored by the EMS100 include: EGT, CHT, TIT, OAT, IAT, Oil Temperature (OT) & Pressure (OP), Fuel Pressure (FP),  Fuel Flow (FF) & Fuel Levels (FL), RPM, Manifold Pressure (MP), Voltage, and Amperage.

For additional information please refer to the Product Description section and the supplied documentation.