ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Fuel pressure gauges are used in BRP-ROTAX® aircraft engines and offered as certified or non certified parts from their respective manufacturers. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation.

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

Fuel pressure gauges are no longer offered as ROTAX Part Numbers. These part numbers are provided for reference only. For these gauges please refer to our product presentation on AVIASPORT Fuel Pressure Gauges or contact us.

UMA line of precision electronic pressure senders feature precision, solid state sensors and circuitry to give unequalled performance and are designed for rugged use in just about any environment.  They are offered in TSO'd and Non TSO'd models and gauge, differential and absolute types. UMA TSO'd electronic pressure senders are the most economical TSO’d units on the market. They are compatible with avgas, jet fuel, engine oil and many other fluids. Because they have internal voltage regulation, they are compatible with indicating instruments that do not have precision output voltages. Units for fuel and oil pressure are certified under TSO C47. Units for manifold pressure are under TSO C45a. For additional information please refer to the attached documentation.

KANARDIA HORIS Air Data-Attitude/Heading Reference System (AD-AHRS) includes several state of the art sensors and combines them into a small PFD display. It can serve as standalone PFD displays and it can be used as a primary instrument or as a perfect backup. It is offered as standalone (master) device with integrated sensors or as a slave unit when an I-ALT-IAS or EMSIS PFD or NESIS are present on the CAN bus. AD-AHRS standalone unit shows: attitude (roll, pitch), airspeed (IAS and TAS), vertical speed (Vario) indication, altitude, outside temperature, QNH setting, heading rate (1 minute and 30 seconds turn), tracking course (True or Magnetic). It is offered for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15") and comes supplied with digital outside temperature sensor.

Product Features:

very low power consumption (< 2W at 12V),

low cost,

precise altitude pressure and IAS (indicated airspeed) sensor – connects to pitostatic,

precise angular rate sensors – gyros and accelerometers,

GPS receiver,

digital outside temperature sensor,

lightweight design (weighs only 235 g),

CAN bus compatible.

Available Options for HORIS AD-AHRS 57/80 (sold separately). They must be specified at the time of ordering.

MAGU Electronic magnetic compass.

AP-K Two servos for the two axis autopilot function. Must include also AMIGO.

AMIGO Autopilot panel for direct access to Autopilot functions. Must include also AP-K.

UMA Non TSO'd airspeed indicators are offered in 2-1/4" and 3-1/8" Single (MPH) and Dual Range (MPH/Knots) versions for installation on experimental aircraft only. They are housed in Valox 420 plastic cases and weigh 8.6 oz. . Depending on the selected indicator, ranges are in MPH, Knots or kilometers. Some inicators are also offered as certified (FAA TSO'd) units. Standard dial markings are black and white. Optional custom range markings and optional internal lighting(*) are also offered upon request at additional cost. Please indicate the markings option (if markings are required) and lighting option at the time of ordering. 

(*) Note: An inverter is required for the Internal Lighting Option.

RS FLIGHT SYSTEMS develops and manufactures avionics for general aviation and flight test equipment. RS FLIGHT SYSTEMS range of avionics includes Engine Management Units for Rotax 912 iS / 915 iS engines, engine panels, automatic propeller speed control unit (SCU), and SCU front panel, iS Data Recorder for Rotax iS engines (912iS / 915iS / 916iS), control panels, portable test bench for independent drive of BRP Rotax iS engines, real-time wind indication system, Fly by wire control sticks, CANaerospace based flight test instrumentation  and more. 

The RS FLIGHT SYSTEMS 2nd generation ROTAX® 912iS/915iS Engine Management Units (EMU) include 2 cockpit mounted engine monitoring, data logging & propeller control devices, EMU 912iS evo & EMU 9xiS. Both feature the same hardware, software and functionality but differ in dimensions and weight. They integrate seamlessly into the Rotax 912iS/915iS engine wiring harness, providing indications of all available engine parameters, engine status, ECU faults and additional sensor inputs. Suitable for 14 V and 28 V aircraft electrical systems with minimum installation effort. Configurable for use with different unit systems. Additional features: sunlight-readable backlit display, dual optically isolated CANaerospace data bus interfaces for retained redundancy, continuous monitoring and health checking of both ECU display buses, georeferenced data recording of all parameters at 10 Hz over up to 2,000 hours, simple data transfer & software update via an integrated memory card slot, sophisticated visualization & processing tool for recorded data, Google Earth file export of recorded data inc. GNSS and engine data. Wiring Harness Kit (incl. power supply wires) is also available (sold separately). A separate module (sold separately) provides connection to 912/914 carburetor Rotax engines.

For more information on RS FLIGHT SYSTEMS products please consult the Product Description section and the supplied documentation.

SWIFT AIRCRAFT manufactures Swift two-seater low wing composite aircraft with striking elliptical wings and double curvature surfaces. Comfortable, safe and environmentally sound they are designed and manufactured entirely in the UK, and available globally,

The company also manufactures Swift aircraft gauges specializing in precision-engineered gauges, including Exhaust Gas Temperature (EGT) and Cylinder Head Temperature (CHT) gauges, commonly used in aviation.

Accelerometers (aka G-Meters) are used extensively in a wide range of applications including Aviation, Marine, Automotive, Military, and others. They are also used  in inertial navigation and guidance systems in airplane and ship autopilots.They help in a better understanding of static, such as gravity, or dynamic forces due to motion or vibration acting on an object.

Original Mechanical and more recent Digital accelerometers, used on civil and military aircraft, measure the instantaneous acceleration (or G-force) of an aircraft and its occupants compared to Earth's standard gravitational pull, in units of "G" (e.g., 1G, 2G). They enable pilots to monitor flight conditions, maintain safety, or practice aerobatics or combat maneuvers. Made by different manufacturers, they are offered as non-certified instruments, for use on  experimental and homebuilt aircraft, or certified products, installed on civil transport an military aircraft.

Mechanical accelerometers, separately listed, use traditional components like proof masses, springs, and damping to measure acceleration based on displacement, offering high accuracy and durability for specific applications like flight stabilization and weapons communication. They are often of larger size and more expensive. Digital accelerometers, included in this listing, are often Micromachined Micro-electromechanical (MEMS) systems, integrating sensors with microelectronic circuits for smaller size, lower cost, and high precision, making them ideal for flight stabilization, AHARS, and autopilot systems.

The choice of an accelerometer depends on the application's need for accuracy, size, cost, and resistance to harsh environments. 

Please consult the Product Description section and the supplied documentation for more information on different brands of our offered accelerometers.

1-1/4 inch TSO'd Electronic Fuel Pressure Gauges from UMA INSTRUMENTS. Black & White dial marking. Available in different pressure (PSI) ranges. Case: Aluminum. Weight: 4.0 oz. UMA sensors are sold separately.

AIRPATH certtified (FAA TSO) Magnetic Compasses are used in almost all production aircraft. They are offered in in different panel mount and pedestral models,  lighted or non lighted versions, black & white markings, black finish, and capabilities for operations in South or North Hemisphere. 

AIRPATH C2300 panel mount magnetic compasses fit in a 2.25 in. hole and need 3 in. of clearance from behind the panel. Offered Models(*): C2300, C2300-SF, C2300-L4, C2300-L4-SF.Compass fluid is included inside the units and come with the mounting screws and nuts required for their installation. A compass deviation card and card holder can be ordered separately. 

AIRPATH C2400 series pedestral magnetic compasses have been specifically designed for installation either for streamline-type bracket housing or a pedestal-type housing. Wire lead length, voltage, and lighting color are specified under each respective part number. Each model is provided with mounting hardware, deviation card, deviation card window and either an attached cardholder, deviation plate, or standard unattached cardholder depending on the application. All compasses in the C-2400 series meet FAA TSO-C7c requirements and are offered in different versions for operations in South or North Hemisphere. They fit in a 2.25 hole. Lighting: Red 12 VDC. Meet FAA TSO-C7c requirements.

(*) Letter “L” after the dash in the part number indicates a lighted version. Letters “SF” indicate South Hemisphere.

KANARDIA INDU Series round altimeters are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters. They feature colour LCD display, one or two pointers  with possibility to personalise scales (in feet or meters) and LCD displays. They are offered as standalone (master) altimeters with internal pressure sensors or as slave instruments. The slave version requires some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the CAN bus. KANARDIA INDU Series round altimeters are available for two standard panel hole diameters of 57 mm (2.25") with one pointer and 80 mm (3.15") with two pointers. They can also be ordered with integrated backup battery at additional cost. The backup battery can also handle and additional indicator, typically an airspeed indicator.

The EDM 930 by JPI collects and displays engine data in a useful way. This EDM monitors engine temperatures and voltages, adjusts the fuel/air mixture, and diagnoses engine malfunctions. The EDM 930 display screen is arranged into three sections. The top left is the RPM and MAP section. The bottom left is the Scanner® section. And the right side is the Bar Graphs section. 

The RPM and MAP Display shows the RPM (Revolutions per Minute) and the MAP (Manifold Pressure).

The Bar Graphs Display shows:

- Oil temperature

- Oil pressure

- Fuel pressure

- Bus voltage

- Amps load or charge/discharge

- Outside air temperature (or owner selectable )

- Fuel flow, units per hour

- Left fuel quantity (or owner selectable)

- Right fuel quantity (or owner selectable)

The Scanner Display has the exhaust gas temperature (EGT) bar graph presentation as its central part with additional Cylinder Head Temperature (CHT) and TIT indications.

The FAA TSO'd RCA26AK (14V) and 26BK (28V) series of electric attitude indicators (artificial horizons) by KELLY MFG (RC ALLEN) are known for their dependability and ruggedness. They incorporate tremendous advances in presentation, precision, and reliability.With a proven track record for dependability and ruggedness, the attractive new extended color schemes and ultra-precise spherical presentation (eliminating old parallax problems) they set a new standard for safety.These gyros provide a more accurate IFR reference for the beginning instrument pilot or a Cat II captain. A new three phase motor/inverter is designed into the gyro enabling it to operate at lower temperatures which extends to useful life. The instruments employ a new, high precision air erection system which provide erection torque for maintaining a proper vertical alignment reference. The erection air is supplied by a turbine pump which is integrally coupled with the gyro motor. Through maximum utilization of unitized construction the design is free of resonant frequencies below 100 HZ and thus cannot respond to low frequency disturbances which can cause dither and premature wear out of the unit. The display portion of the instruments has a directly coupled roll movement, and a pitch movement mechanism identical to that of the field proven vacuum gyros produced by R.C.Allen since 1966. A "pull to cage" spring type force limited mechanism assures immediate alignment and stability whenever power has been applied to the gyro, a feature non-existent on vacuum driven gyros. These artificial horizons have a hybrid inverter which converts the aircraft DC power to the required voltage and frequency for motor operation. All units have a pull cage knob and a power failure flag that drops into view whenever the supply voltage is lost or when the voltage has dropped below a level of acceptable for proper operation of the gyro. Slip indicator can be added to satisfy FAA AC91-75 upon request. Available in 14V or 28V voltage versions with fixed or movable pointer, lighted or unlighted, power failure flag, panel tilt and optional inclinometer. Mating connector MS3116E8-4S and panel screws are now included with each new instrument at no extra charge.

Dimensions: 3.38"W x 3.38"H x 8.14"L

Weight: 2.3 lbs.

MGL AVIONICS XTreme full featured instrument series include an Electronic Flight Instrument System (XTreme-EFIS) with navigation/autopilot capabilities and anEngine Monitoring System (XTreme-EMS). Their light weight, small size and high level of functionality makes them an excellent choice for use in non-certified aircraft. Both instruments fit a standard 3 1/8” (80mm) instrument panel hole. All information is displayed in an easy to read format on a high resolution wide viewing angle 4.3” sunlight readable color display. The XTreme-EFIS includes all the functions of the XTreme-EMS version. It a compact, multifunction electronic flight information system intended as a main flight instrument in smaller aircraft or as a backup/secondary flight instrument in larger aircraft. It integrates all the necessary functionality to replace several flight and engine monitoring instruments.The XTreme-EMS is a compact universal engine monitor replacing several engine monitoring instruments. All engine sensors are connected to a RDAC (Remote data acquisition unit) normally mounted behind the aircraft firewall. A simple CAN communication link is then necessary to connect the XTreme-EMS to the RDAC.

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality. 

FALCON GAUGE  Electrical Turn Coordinator is used for displaying the angular rate and sideslip of turning in horizontal flying and turning. The inclinometer indicates the slip angle of the aircraft while in a turn. A power failure flag drops into view whenever the voltage drops below a level for proper operation. The Turn Coordinator incorporates a built-in voltage regulator so it can be used with either 14VDC or 28VDC power system. It is compact in size and light weight eliminating radio interference.

This small, lightweight unlighted turn coordinator is excellent for homebuilt aircraft. Works for 14 Volt or 28 Volt systems. Features, power out warning flag with a 0° Panel. Fits Standard 3-1/8" Cut Out, 3-3/4" long.

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality. 

FALCON GAUGE True Airspeed Indicators have been one of the most chosen flight instruments by kit plane builders and pilots. There are many great advantages: excellent slow speed characteristics; very progressive increments; variety of ranges; light weight; short length; affordable price; high precision and reliability. Falcon Gauge True Airspeed Indicators have sub-dials and windows and are housed in an aluminum case and all parts made from metal.  The Pilot can set the dial to coincide the outside temperature with the flight altitude for immediate reference. 

Offered with a single range reading or dual range readings, with MPH, Knots or KPH available ranges, a 3-1/8" size,  a short 2.2" length, optional internal lighting 14V DC or 28V DC and custom color range markings which can be special ordered, these indicators serve the needs of experimental aircraft cockpits. 

HONEYWELL BENDIX KING® KNI-582 Radio Magnetic Indicator (RMI) provides bearing information to either ADF or VOR stations by means of two pointers each of which is read against compass card. The KNI-582 RMI requires inputs from ADF, HSI and NAV receivers and combines three data points on one indicator. The current aircraft heading from an HSI is shown on the card. The magnetic headings to VOR and NDB stations are shown by the twin needles. By combining all this information visually, less interpretation is required thus enhancing overall situational awareness, something especially helpful when the workload is high.

Product Features:

Dual pointer RMI

Accepts AC SIN/COS, DC SIN/COS, Serial, and VOR Composite inputs

Compatible with NAV Receivers such as KN-53, KNS-80, KNS-81, KX-155/165, KX-170B/175B, KNR-615, KNR-630, KNR-634, KNR-665, KNR-665A

Compatible with ADF receivers such as KR-85 (w/ KI-227 -01/04), KR-87, KDF-800/805/8000

Compatible with Compass Systems and NAV indicators such as KCS-305, KCS-55/55A, and KPI-550

Models available with 5 or 28 volt lighting 

Models available with black or gray bezel

TACAN compatible and night vision goggle versions available

TSO'd

Specifications:

Altitude: To 50,000 feet

Operating Temperature: -20 to +55°C

Weight: 3.0 lbs. (1.4 kg)

Power Requirements: 28V 4A / 26VAC 6VA

TSO Compliance: Env. Cat. RTCA DO-160A A1D1/A/SKP/XXXXXSABAAA; TSO C6c (compass); TSO C41c Class A (ADF); TSO C40a (VOR)

Compass Heading Input: Operates from any slaved magnetic compass with ARINC X,Y,Z outputs.

OMRON A3C series cylindrical pushbutton switches have the basic design as the M2C Series cylindrical indicators. They provide a high-intensity uniform surface lighting while they have a miniature size with excellent feeling of operation. They have a cylindrical 20-mmX12-dia. body making panel cutouts easier. These switches are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. Please consult the attached documentation for ordering.

Sigma-Tek 5000B Series Attitude Indicators (Artificial Horizons) are air-driven gyros that have a pictorial horizon mask and fixed airplane. The mask moves to indicate climb, dive, and bank. Bank and pitch attitudes are displayed so that the pilot’s sensing of the gyro indication is the same as the interpretation of the relation between the wings of the aircraft and the natural horizon during visual flight. These instruments are FAA certified (TSO-C4c), and can be used to replace the aircraft’s turn coordinator when equipped with an inclinometer. Different versions available mainly based on the layout, dispay colors, warning flag and lighting capabilities. Lighted indicators do not include lamp trays which are sold separately based on the aircraft voltage (14V or 28V).

KANARDIA INDU Combo IAS/Altitude/Vertical Speed Indicators are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters.They feature an LCD display with possibility to personalise scales and LCD displays. They are offered as standalone (master) or as slave gauges. Slave versions require some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the bus. KANARDIA INDU Combo IAS/Altitude/VSI gauges are available for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15"). Arc colors need to be specified  at the time of order.

HONEYWELL BENDIX KING® KA 51B is a slave meter used in the KCS 55A compass system. Displays slaving error between the KMT 112 flux valve and KI 525A pictorial navigation indicator by means of small meter movement.