These UMA new manufacture NON TSO'd electric ammeters offer accuracy, rugged construction, and contemporary styling. They are available in different  measurement ranges with a 270° sweep and are suitable for installation in 2-1/4" panel hole diameters. Made in U. S. A. and furnished with shunt.

GARMIN GI-106B TSO'd panel-mounted CDI is a high-quality course deviation indicator which includes a VOR/LOC/GPS needle as well as a glideslope needle, that can be hidden and disabled by an installer if the glideslope functionality is not needed. The GI 106B contains LED-lit GPS, NAV and VLOC mode annunciators, for an easy-to-read and modern look. TO/FROM annunciators are also LED, and when invalid, the needles are simply hidden out of the pilot’s view instead of using conventional invalid flags. The GI 106B replaces existing Garmin GI-102A & GI-106A models. It is compatible with the same pinout connections as the legacy GI 102A and GI 106A course deviation indicators, allowing for an easy upgrade path. It also features anti-reflective lenses and LED flood lighting for viewing at night.

KELLY MANUFACTURING (RC ALLEN) RCA 15AK series are TSO'd 3-1/8" ( 80mm) electric directional gyros suitable for both fixed wing and rotor wing aircraft.

This 2-1/4 inch flap indicator uses a resistance potentiometer as a flap position sensor. Transmitter is required. Wt: 9.8 oz.

KANARDIA INDU Series round Vertical Speed Indicators (Variometers) are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters. They feature an LCD display with possibility to personalise the displays and scales. They are offered as standalone (master) VSIs with internal pressure sensors or as slave instruments. The slave version requires a master altimeter or some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the CAN bus. KANARDIA INDU Series round altimeters are available for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15").

Scale Ranges:

-M scale in meters per second (-10, 10)

-FT scale in feet per minute (-2000, 2000)

-KTS scale in knots (-20, 20)

AN5771-4A style 2-1/4 inch hydraulic pressure gauge with steel case connecting directly to the aircraft's hydraulic system. Fits in a 2-1/4" dia. panel opening and has a threaded 1/4"  connection for a fitting. Range: 0-2000 PSI. Only available in Overhauled Condition. Certified with fresh Matte-white dial. Yellow-tagged. Limited availability.

For new design projects and applications please refer to the presentations of alternative TSO'd and non TSO'd electronic hydraulic pressure gauges and pressure senders offered. 

Pressure Transducers (Senders) whenever required, ARE NOT INCLUDED in the prices of hydraulic pressure gauges. They are sold separately.

Note: A yellow tag is similar to a FAA 8130-3 Serviceable tag both denoting the "Serviceable" condition of the product i.e. it has been  repaired as needed, tested according to the manufacturer's procedure, meet the manufacturer's performance specifications and ready to return to service. Yellow tags are issued and widely accepted in North America while a FAA 8130-3 Serviceable tag is is accepted worldwide. The acceptance of yellow tags by national Civil Aviation Authorities should be checked by potential buyers prior to ordering.

Sigma-Tek 5000B Series Attitude Indicators (Artificial Horizons) are air-driven gyros that have a pictorial horizon mask and fixed airplane. The mask moves to indicate climb, dive, and bank. Bank and pitch attitudes are displayed so that the pilot’s sensing of the gyro indication is the same as the interpretation of the relation between the wings of the aircraft and the natural horizon during visual flight. These instruments are FAA certified (TSO-C4c), and can be used to replace the aircraft’s turn coordinator when equipped with an inclinometer. Different versions available mainly based on the layout, dispay colors, warning flag and lighting capabilities. Lighted indicators do not include lamp trays which are sold separately based on the aircraft voltage (14V or 28V).

The HONEYWELL BENDIX KING® KMT 112 is a Magnetic Azimuth Transmitter (aka Flux Detector or  Valve) which senses the direction of the earth’s magnetic field and continuously transmits this information through the slaving circuitry to a directional gyro (such as the HONEYWELL BENDIX KING® KG 102A or KSG 105 slaved directional gyros). This sensor is mounted remotely, usually in a wingtip, to eliminate the possibility of magnetic interference. The KMT 112 is typically used in HONEYWELL BENDIX KING® KCS 55A and KCS 305 compass systems. The KMT-112 flux valve is a sealed unit and cannot be serviced or have parts replaced. The unit must be replaced when/if it fails.

Like other KCS 55A compass system components, the  KMT 112 transmitter can be furnished in NEW condition or as USED in Serviceable or Overhauled conditions indicated respectively by the letters "SV" and "OH" in the product reference numbers (SKU and  accompanied by the relevant certification (e.g. yellow tag, 8130-3 form). They are also offered as exchanges / trade-ins  for returned customer owned units indicated by the letter "EX" in the SKU.  In the case of an exchange/trade-in option of a customer unit, the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders when our co-operating supplier verifies that the unit is in a reasonable, repairable condition. It is recommended that this option is selected by our customers mainly for upgrades and only in cases when their units are functioning properly at the time removal from the aircraft. In cases when customer units are found by our supplier to be non-repairable, the core deposit shall not be refunded and shipping charges shall apply if customers wish the return of these units to them. 

Installation parts and manuals are sold separately. 

For additional information and technical specifications please refer to the Product Desscription section, the product presentation of the HONEYWELL BENDIX KING® KCS 55A compass system or contact us.

4-Pin connector by AMPHENOL for use in all electrical gyros (DG or Horizon) including Falcon models.

UMA Electronic Hydraulic Pressure Gauges are offered in TSO'd and Non TSO'd models and 1-1/4"  or 2-1/4" diameters to fit respective aircraft panel openings. They are housed in aluminium or Valox 420 plastic cases (depending on the model) and connect to  precision, high pressure transducers which mount directly to the aircraft's hydraulic system. Standard markings are black and white. Recommended for new design projects and applications. 

Note: Pressure Transducers (Senders) ARE NOT INCLUDED in the prices of the pressure gauges. They are sold separately and are not TSO'd.

VDO Fuel Level Gauges have always been known for the superb fit, finish, and appearance, as well as the wide range of styles VDO offers. VDO Fuel Level 10-180 ohm Gauges  are offered in 2" and 2-1/4'" diameters with matching Fuel Level Senders  (aka sensors or probes) for their operation. This 12/24 VDC Fuel Level Sender has a resistance rating of 10 ohms when the tank is empty and 180 ohms when full. The unit can be adjusted to read accurately in tanks from 6" to 23" deep. In the case of the 2" 33-240 ohm Fuel Gauge, the appropriate fuel sender is P/N 226-007.  

VDO product range also include Standard Tubular Level sensors mounted direct into the tank with different tube diameters and lengths from 200 mm to 650 mm and different resistances. They feature:

- Resistance output

- Compatibility to the VDO gauges 301-010-00X and X10-110-981-009  (adjustable to 60 to 90 Ohm at empty).

- M4 bolt and hexagon nut or 6,3 x 0,8 mm spade terminal

- Optional ground connector

- Optional warning contact

- Mounting bolt circle 54 mm dip tube fuel senders with different tube diameters and lengths.

For additional information please consult the supplied documentation or contact us.

UNITED INSTRUMENTS 8000/8100 Series Air Speed Indicators (ASI) are FAA TSO'd for installation on certified aircraft. 

The 8000 Series ASI indicate the speed relative to the air at sea level altitude. The 8100 Series True ASI indicate the speed relative to the air at sea level or the desired altitude.The indicator has an inner dial to indicate true airspeed. The altitude and temperature are the conversion factors used to obtain this reading with the use of a setting knob. 

When properly connected to an airspeed tube, the 8000/8100 Series airspeed indicators measure the differential pressure developed between the pitot and static opening. 

The pressure is indicated in units of airspeed mph (M) and/or knots (K).

Product Specifications:

Certification: FAA TSO C2b 

Case Configuration: MS33638, 3 inch

Typical Weight: 0.7 pounds

Static, Pitot Pressure Connector:   1/8-27 ANPT

Installation: Removable spring nuts and #6-32 screws

Lighting: Available upon request. All lighted instruments require a light tray sold separately. Please refer to offered SIGMA-TEK 5000B 14V or 28V Light Tray.

UMA NON TSO'd Electronic Amp Meter Gauges (Ammeters) are available in different series for different measurement ranges and installation in different panel hole diameters. 1-1/4" series allow utilization of panel space without compromising readability. They can be powered from 14 or 28 volts. Signals are acquired from remote mounted sensors, processed and displayed on analog dials with easy to read markings. Each gauge uses rugged aircore meter movement for vibration resistance and repeatability. Each gauge can be placed in a 1-1/4” diameter hole and mounted behind the panel with (4) 6-32 screws. They can be cluster mounted as close as 11/2” centers. Also available as new manufacture electric with 2-1/4" dia. Other UMA series of electronic ammeters include 2-1/4" series with moving coil and 85° Sweep and 2-1/4" Dual Amp/ 0-30 volt meters with moving coil  and 85° sweep.

NOTES:

These ammeters come with the suitable shunt. Different shunts are used depending on ammeter part number.

All Part Numbers beginning with the letter "T" are TSO'd for Certified Aircraft.

1-1/4 inch TSO'd Electronic Fuel Pressure Gauges from UMA INSTRUMENTS. Black & White dial marking. Available in different pressure (PSI) ranges. Case: Aluminum. Weight: 4.0 oz. UMA sensors are sold separately.

BENDIX KING KG 102A TSO'd Remote Mounted Directional Gyro can be used in in BK KCS 55A compass system  in conjunction with KMT 112 Magnetic Azimuth Transmitter to provide a gyro-stabilized magnetic heading to KI 525A HSI.

The STRATOMASTER VEGA range instruments/indicators from MGL AVIONICS includes different 2 1/4" (57mm) microprocessor based color display instruments operating over a wide supply voltage range of 8 to 30V DC with with built in reverse and over voltage protection. They are non certified and only suitable for installation in experimental and sport  (LSA) aircraft. Using a high resolution color graphics display, these instruments/indicators provide excellent daylight readability with built in backlighting making them easy to read at night time. They include a rotary control plus 2 independent keys for easy menu navigation and to access specific instrument features. Sensors are also offered to enhance their functionality. The MGL AVIONICS STRATOMASTER VEGA Series instruments/Indicators include: Artificial Horizon & Magnetic Compass Display, Altimeter/VSI, ASI, ASI/VSI, Engine Monitoring System (EMS), Fuel Computer, Information Display, Manifold Pressure, Température, RPM, Hobbs, Universal Engine/Rotor RPM, Hobbs, 4-Channel Thermocouple (EGT/CHT), 4 Channel Universal Analog Input (Pressure/Temperature/Voltage/Current) and NAVCOM Control head for MGL N16 NAV/COMM or V16 COMM VHF.

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality. 

FALCON GAUGE  Electrical Turn Coordinator is used for displaying the angular rate and sideslip of turning in horizontal flying and turning. The inclinometer indicates the slip angle of the aircraft while in a turn. A power failure flag drops into view whenever the voltage drops below a level for proper operation. The Turn Coordinator incorporates a built-in voltage regulator so it can be used with either 14VDC or 28VDC power system. It is compact in size and light weight eliminating radio interference.

This small, lightweight unlighted turn coordinator is excellent for homebuilt aircraft. Works for 14 Volt or 28 Volt systems. Features, power out warning flag with a 0° Panel. Fits Standard 3-1/8" Cut Out, 3-3/4" long.

The PAI-700 TSO'd Vertical Card Compass is manufactured exclusively by Precision Aviation, Inc. This non-liquid (dry) type compass is magnet driven thus it is subject to lead and lag, however, these tendencies are greatly reduced due to the absence of pendulosity.  It is inherently stable due to the use of eddy current damping which is a natural phenomenon built into the basic design and as such has no overshoot. The PAI-700 has been designed to replace the float/liquid type compasses eliminating leaking fluid or backward azimuth readings. Available for Southern and Northern Hemisphere and different supply systems (5V, 14V and 28V). Precision Avionics Inc. also manufactures different compass brackets for overhead or glare shield mounting.

The Precision PAI-700  Vertical Card Compass consists of a 2" vertical rotating dial which is compared with a fixed miniature airplane (lubber line) to present the magnetic heading of the aircraft at all times. Heading information is more natural because the heading is read at the12 o'clock position and off the nose of the miniature aircraft. The compass card rotates and presents all quadrants in their true relation to line of flight. Requires no power (except for lighting) to operate. Installed in many current production aircraft & helicopters. Size: 2-7/8"H x 2-3/8"W x 2-1/8"D. Wt. 0.6 lb. After installing compass must be compensated using standard compensation procedures. Also used in sailplanes.

Note: Compass deviation card is included. A mount, sold separately, is required for installation with the unit.

OMRON A16 series pushbutton 16-dia. cylindrical body switches are detachable switches. The same contacts can be used for both standard loads and microloads. Their miniature design of 28.5 mm makes these switches the smallest class in the industry. Easy-to-wire terminal arrangement. Certified for EN 60947-5-1. These switches are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. Please consult the attached documentation for ordering.