BRIDGESTONE® CORPORATION is the world's largest manufacturer of tires and other rubber products, delivering a wide range of innovative, premium product portfolio whch includes passanger and light truck tires, motorcycle tires, commercial truck and bus tires, aircraft and mining tires. The company also manufactures industrial rubber and chemical products, sporting goods, and other diversified products. Tires account for 80 percent of Bridgestone Group sales worldwide with sales of tires and other products in more than 150 nations.

BRIDGESTONE® has more than 80 years of experience and insistence on quality in aircraft tire manufacturing. The company supplies new and retread (*) tires to airlines and wheelshops worlwide remaining one of the most trusted brands in the aviation industry.

BRIDGESTONE® range of aircraft tires includes Bias, Radial and Revolutionarily Reinforced Radial Tires (RRR). They work under extremely severe conditions, carrying the weight of an aircraft up to 569 metric tons while accelerating up to 245 mph at takeoff, in addition to enduring varied environmental stress when in flight and taxiing.

The company manufactures its new aircraft tires in Japan while it operates aircraft tire retreading plants in Japan, the United States, Belgium and Hong Kong. Bridgestone provides airlines with seamless, global support for all of their product and maintenance needs in tires. 

BRIDGESTONE® Bias tires feature enhanced tire durability, greater overload durability, reduced weight, new cord and performance improvements due to the integration of Tension Control Optimization (TCOT) and Aircraft Tire Tension Control Optimization (ACOT) Theory principles.

BRIDGESTONE® Radial tires feature lighter design, reduced rolling resistance, rigged belt design, added strength to belt and carcass plies and increased number of landings.

BRIDGESTONE® Revolutionarily Reinforced Radial Tires (RRR) feature superior safety, higher cut resistance, more casing durability after received Foreign Object Damage (F.O.D.), economy, less weight and more landing cycles (improved tire wear). They have been selected by Airbus and Boeing as OE tires for their respective aircraft.

Please refer to the supplied documentation and the Aircraft Tire Application Table for additional information.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

ACS US made all-metal gascolators are offered in two models:

10580 Homebuilders Gascolator - Homebuilders gascolator for use with aviation fuel and standard auto fuel

All-metal gascolator for use with aviation fuel and standard auto fuel with S.S. screen, 1-7/8" dia. cadmium plated steel bowl w/quick drain. Top is CNC machined from 6061-T6 aluminum. Top has 1/4" pipe ports for 3/8" fuel line and one 1/8" pipe port for primer fitting. Wt: 8 oz. May be used with aviation and/ or auto fuel. Replacement gasket for auto fuel is p/n 06-00441. Made in USA.

Not to be used with fuel injectors because it cannot stand up to the pressure.

10585HP High Pressure Gascolator - High Pressure gascolator with lighter weight and simpler design

New ACS high pressure gascolator. Lighter weight and simpler design than the ACS "classic" gascolator. Bailwire and attaching hardware have been eliminated. Threaded collar secures bowl to top. Tested to 50lbs. Bowl is cadmium plated and top and collar are anodized for corrosion protection. Top has 1/4" pipe ports for 3/8" fuel line and one 1/8" pipe port for primer fitting.

10371 Gascolator Bracket - Mount bracket suitable for  gascolators with either metal or glass bowl

Suitable for  gascolators with either metal or glass bowl.

Versatile bracket of .016 stainless steel accommodates gascolators with either metal or glass bowl. When mounted as illustrated, inlet and outlet connections are on sides. When bracket is inverted, one port of gascolator faces firewall for direct routing of fuel line through firewall. A fine quality item manufactured by ACS Products Co. Fits gascolators sold after May 1, 1989.

The gascolator hole in the mount is approx 1-7/8".

Replacement screens (filters) and other parts are also available.

CLEVELAND WHEELS & BRAKES, part of PARKER HANNIFIN CORPORATION, offers an extensive range of FAA-PMA approved master brake cylinder assemblies for use in different aircraft.

CLEVELAND master cylinders come in push or pull types in different bore, stroke and displacement variations in inches and 7/16-10 or 1/8-27 N.P.T. port sizes. Some models include parking valves and reservoirs. 

For additional information please consult the supplied documentation on technical characteristics and suitability of the master cylinders for specific aircraft.

The RBC® BEARINGS offers a full line of airframe control ball bearings to the aerospace industry  in both “Standard” and “Precision” series. The prefix “M” in a bearing number indicates that it is of a precision series. Although designed and manufactured under demanding quality control requirements for airborne systems, these bearings have been successfully used in many industrial applications, where oscillatory movement, high loads, or corrosive environments are prevalent.

RBC® BEARINGS airframe control ball bearings conform to SAE-AS7949 (formerly MIL-B-7949) and many major OEM specifications. These bearings are of lightweight design, corrosion-resistant, grease-lubricated, and typically sealed. Airframe control bearing rings and balls are made of hardened bearing alloy, AISI 52100, with all exposed surfaces, except bearing bore, caps and seals, plated for corrosion protection. For improved corrosion protection, RBC® BEARINGS  supplies bearings made of hardened stainless steel alloy, AISI 440C. This alloy may be passivated or plated with cadmium or zinc nickel for enhanced corrosion protection.

The RBC® BEARINGS MKSP/MKSP-A SAE-AS7949 Precision Series airframe control self aligning bearings are single row, heavy duty (MKSP) or medium duty (MKSP-A) ball bearings with PTFE seals and CRES sealcaps. These bearings are self aligning for 10 Deg. in either direction  except those with part numbers MKSP4A, MKSP5A and MKSP6A which are self aligning for 8 Deg. in either direction. The RBC® BEARINGS MKSP/MKSP-A bearings conform with MS27645-R specifications. External surfaces (except bore, caps, and seals) are cadmium plated. They come prelubricated for life and are also offered with CRES 440C material and/or zinc nickel plating per OEM specifications. For additional information please refer to the supplied documentation.

The A350CN series instrument post light assemblies from WHELEN AEROSPACE TECHNOLOGIES (WAT) are designed to illuminate the instrument panels and function as instrument mounting bolts. Identical to the A350 Series but with the connector nut. Available in different versions with white or red lens and 12 or 28V electrical power supplies.

RBC Aerospace Bearings offers a full line of Mil Spec standard lined journal bearings, unlined bushings, and many specialty and custom designed products to support the aerospace industry.   Journals are designed in a straight (plain) configuration with a flange to accommodate a combination of radial and axial loads with corrosion resistant materials and coatings. Journals are also offered in high temperature and water resistant series. Typical journal materials are CRES 17-4PH and aluminum.  Bearings may also be cadmium or zinc nickel plated as required while CRES 440C and Inconel® 718 are available upon request. Journal bore and flanged journal face surfaces may also be provided with various liner systems to satisfy specific application requirements. Machinable liners  are qualified to AS81934 (formerly MIL-B-81934). For additional information please refer to the attached documentation.

Terminal boards (aka terminal blocks or terminal board assembies) are connectors that terminate a single wire and connect it to a circuit or other system. In their simplest form, they consist of several individual terminals arranged in a long strip. Terminal blocks come in a range of shapes, sizes and ratings and they are used in a range of applications including aircraft, cars, vessels and others. Those made as per Military Standard MS27212 (superceded by SAE-AS27212) are stud type blocks offered by different manufacturers (such as R&B ELECTRONICS®, MARATHON® Special Products (formerly Kulka), or MARCO Manufacturing) and used on aircraft applications. Studs are made from different types of Corrosion-Resistant Stainless Steel (CRES) with our without passivation. Insulation material is Diallyisophthalate plastic meeting US Federal Standard GDI-30F & Mil-M-14. Max operating temperature can reach 155 Deg, C (311 Deg. F). Their stud thread size and number of studs are indicated in their part number.

MS27212 / AS27212 Product Eatures:

Molded-in-stud electric terminal boards

Excellent corrosion resistance

Excellent dielectric strength

Excellent moisture resistance

Resistance to thermal shock

Total Continuous Rating: (155 Deg. C / 311 Deg. F).

MS27212 -X-(N) Dash No. where X is Stud Thread Size & N is the Number of Studs / Board (Assy.

Stud Thread Sizes (in.) & Types (X): MS27212-1 (6-32 UNC-2A) | MS27212-2 (10-32 UNF-2A) | MS27212-3 (1/4-28 UNF-2A) | MS27212-4 (5/16-24 UNF-2A) | MS27212-5 (3/8-24 UNF-2A) | MS27212-6 (8/32 UNC-2A)

For additional information please refer to the supplied documetation.

McFARLANE® AVIATION manufactures FAA PMA approved fuel quantity transmitters which can be used as direct replacements for originally installed Stewart Warner type fuel quantity transmitters. Use of McFARLANE® AVIATION transmitters eliminates the need for expensive transmitter conversion kits that require replacement of fuel gauges and wiring. They are engineered to be compatible with the original fuel quantity gauge and wiring which uses time proven technology and reliability. Major benefits include higher accurancy, durability, long service life but also significant cost savings as no modifications are required.

McFARLANE® AVIATION fuel quantity transmitters can be sold individually or in kits including the transmitter, gasket(s), and screw/seal assemblies as applicable.

Please consult the supplied documentation for additional information.

B.A.S  Inc.is a supplier of certified (TSO'd ) aircraft safety belts & shoulder harnesses for an extensive range of light aircraft including different Cessna, Piper, Beechcraft, Luscombe and other aircraft models. Their products are manufactured by AM-SAFE Inc. especially for B.A.S.

B.A.S TSO'd rear lap belts and harnesses are offered in different versions including Lap Belts Only, Fixed 3 Point Harness, Inertia 3 point Harness and Y Fixed Harness. The following optional accessories can be ordered only as part of a respective order of a B.A.S  Shoulder Harness/Lap Belt System at additional cost. They need to be specified at the time of ordering.

Padded neck cuffs from a soft suede material to add comfort and prevent chaffing. Available in Black, Tan, and Grey colors. 

BAS seat belt protector sheaths made from hard plastic to help protect lap belts from possible damage due to seat tracks, articulating seats, and doors.

B.A.S TSO'd inertia reel 4 point shoulder harness/lap belt system (kit) is designed and STC'd as a retrofit assembly to replace current aircraft seatbelts. It can be installed in the 2 forward seating positions of the aircraft. Consists of an inertia reel mounted to the aircraft cabin roof above and behind each seat, a "Y" shaped shoulder harness, a lap belt with mating buckle and associated bracketry, all mounting hardware, installation instructions, and STC for both pilot and co pilot shoulder harness seatbelt systems. Standard color of belts is Black but they may also be ordered by special order in different available colors at additional cost upon request. Back seat belts in matching colors are also available by special order. Product Features:

Different kits available with Standard Buckle, Utility Buckle (recommended for float planes) or Rotary Buckle. 

Utility Buckle systems are less restrictive in panic egress and individual belts may be replaced if damaged.

Rotary Buckle systems feature a push button release to disconnect shoulder straps while keeping lap belts connected.

B.A.S Inertia Reel 4 Point Shoulder Harness/Lap Belt Systems are easy to use and comply with FAA-TSO-C114.

Optional Accessories available at additional cost. They can be ordered only as part of a respective order of a B.A.S  Shoulder Harness/Lap Belt System:

BAS Padded Neck Cuffs. Padded neck cuffs from a soft suede material to add comfort and prevent chaffing. Available in Black, Tan, and Grey colors. Please specify color at the time of ordering.

BAS Seat Belt Protector Sheaths. Protector sheaths are made from hard plastic to help protect lap belts from possible damage due to seat tracks, articulating seats, and doors.

Due to the many lengths, styles, and attach fittings available for B.A.S products, prices are indicative and per seat. In addition they must be special ordered and they are non-cancellable/non-returnable (NCNR) once the order is placed.

For more information please refer to the supplied documentation or contact us.

Pitot tubes scan the static and dynamic pressure, and they are used on aircraft to determine the aircraft airspeed. 

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality. 

FALCON GAUGE Non TSO'd (non-certified) pitot tubes have been used for many years on different types of experimental or other aircraft where no certification is required. Available in different heated and unheated versions for 12 or 24 V electrical supplies, for vertical or flat installations. Standard (3/4") and long (4") mounting brackets are offered. Heated Material: Stainless Steel. Please consult the supplied documentation or contact us for further information.

The MS27643/AS27643 series airframe control bearings are offered by various manufacturers. They are  double row, ball, self-aligning, heavy duty bearings produced in accordance with AS7949 specification.

Depending on the manufacturer, rings and balls of these bearings are produced from premium quality AISI 52100 chrome steel or CRES 440C materials.  External surfaces (except bore, caps, and seals) are cadmium plated per AMS-QQ-P-416 or zinc nickel plated per OEM specifications. They include PTFE seals, CRES sealcaps and they are prelubricated. They are offered in different sizes but custom sizes, materials, tolerances, radial internal clearances, lubrication, plating, etc., can also be offered upon request.

Operating temperature range: -65 to +250 °F.

The HEIM® BEARINGS company has been acquired by RBC® BEARINGS, a leader in the world of highly engineered bearing products. 

HEIM® BEARINGS produces the industry's widest range of rod end bearing sizes (aka rod ends) in  the following four grades (types): precision, aircraft, military and commercial with each grade including different series suitable for respective application requirements. HEIM® BEARINGS are made from different materials featuring among others high strength two piece designs, high capacity designs, self-lubricating options and thermoplastic races or Teflon® liners. Please consult the supplied table on different grades and series offered.

- Precision rod ends are manufactured to tight tolerances for applications requiring improved linkage accuracy and reduced looseness. 

- Aircraft rod ends use premium materials, and have magnafluxed rod end bodies. Originally intended for aircraft applications, aircraft rod ends are used in many industrial applications where a high degree of reliability is required

- Military rod ends are produced in strict accordance with all applicable military specifications and are typically used in military and commercial aviation applications, or when Mil-Spec approval is required

- Commercial rod ends are produced using standard materials and manufacturing methods, and consist an economical choice for industrial applications

The HEIM® BEARINGS ME/AS81935/1 and FE/AS81935/2 series are military standard, high capacity self lubricating rod ends, male and female threaded respecively, using HEIM® UNIFLON® liner approved to SAE-AS81820 (formerly MIL-B-81820). Their rod end bodies are made from 4340 alloy steel, heat treated, magnetic particle inspected, cadmium plated and chromate treated. Balls  are made from 440C on 17-4PH race inserts and heat treated.

Letters “L” and “K” to prefix indicate Left Hand thread and Keyway respectively.

Please refer to the supplied chart for technical specifications and the RBC® HEIM® Bearings Catalog for additional information.

GOODYEAR® AVIATION tires are widely used in all aviation tire market segments, from piston engine light aircraft to turboprops, business jets, regional and commercial airlines.They come in different series meeting respective economy, performance or special operations' application requirements. Offered in NEW or USED (RETREAD) (*) Condition.

GOODYEAR® AVIATION FLIGHT SPECIAL® ΙΙ Series aircraft  tires are popular replacement tires for light aircraft due to their unsurpassed combination of value and performance. Designed for long tread life, they are built to last. They feature quality construction, wide rib thread design and large footprint, tough-wearing thread rubber and triple-tempered nylon casing cord resulting in enhanced traction, uniform wear and extended service life.

GOODYEAR® AVIATION FLIGHT CUSTOM® ΙΙI Series "Top of the Line" aircraft  tires set new records for long wear, high-strength and dependability. They feature dual polymer tread compound, enlarged tread contact area, extra-wide aquachannel grooves, sculptured sidewalls and Kevlar® belts for added tread stability. Benefis from their use include up to 20% more landings, superior wet traction treadwear and enhanced traction and treadwear assisting dimensional stability. 

GOODYEAR® AVIATION FLIGHT EAGLE® Series are industry’s preferred business jet tires. FLIGHT EAGLE® LT tires are designed for very light and light jet applications featuring tough, cool-running tread compound, robust, 6-ply bead area, 2-groove tread design, sidewall with antioxidants to help fight ozone and special wear-resistant tread compounds.

GOODYEAR® AVIATION FLIGHT LEADER® Series tires are the bias-ply choice for commercial aircraft. They feature a bias-ply construction, a specialized cord body shape and a specially compounded tread design and large contact area. They offer high speed performance and greater load capacity but also reduced stress as the tire cycles from tension to compression. They can be used in a wide range of operating conditions and aircraft applications.

For additional information please refer to the supplied documentation or contact us.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

CURTIS PLT-275AV Flush Valves 6 Holes' Adapter Plates Assembly.

Product Specifications:

Diameter: 2.75 in.

Depth: 640,000-650,000

From Mounting Surface to Bottom Hole Diameter: 1-1/2 in.

Not Certified

TYCO ELECTRONICS TE CONNECTIVITY™ SOLISTRAND Series Terminals & Splices are specially designed to terminate solid and stranded wire, irregular-shaped conductors, and wire-conductor combinations while still retaining the superior performance characteristics of single-purpose terminals and splices. The series resists corrosion and vibration, and the tensile strength is well within the limits of commercial and military specifications. TE Connectivity offers SOLISTRAND crimping tools to ensure terminations are consistent and uniform for easier quality control and reliable performance. The TE SOLISTRAND line includes terminals, parallel and butt splices, flat rings, spades, hooks, and flanged tongue terminals in sizes from 26AWG (0.1mm2) through 600 MCM (304mm2).

Features & Benefits

SOLISTRAND terminals and splices are constructed of fine grade high conductivity copper for optimal electrical performance

The brazed seam increases metal strength around the entire barrel area assuring withstanding harsh industrial environments. It also prevents pinched and stubbed wires

The “W” crimp – two longitudinal crimps – and the dimples or serrations inside the wire barrel  offer maximum electrical contact area after crimping and higher tensile strength. This permits the use of a shorter barrel, which end up in a smaller form factor and makes it more cost effective

Bell mouth on barrel entrance makes insertion of wires easier and reduces installation time and increasing production yield

Most SOLISTRAND terminals and splices meet or exceed the requirements of SAE AS7928, Type I, Class 1 and 2. Aircraft-, defense- and marine (related) equipment base their performance requirements on AS7928

Rated for up to 170°C maximum and therefore suitable in all standard applications.

Applications

Pad- and pole-mount transformers

Power supplies

Motors

Switchgear

Telecommunications

Appliances

Panel boxes

Heavy equipment

Instruments/control

Transportation

For additional information please refer to the supplied documentation.

The P1 momentary switch is a sealed, dustproof, snap action, MIL qualified switch ideal for switching low level up to 10 amps. It features screw terminals, and includes screws, lockwashers, and solder lugs.

Product Features:

MIL qualified 

Dustproof, snap action, screw terminals, rugged reliable construction

Threaded or Press Fit Bezel with Black, Red or White Color Button (depending on selected model)

Button sealed with patented “rolling sleeve” principle

Contact area sealed at button & terminals

Less than 25mOhm contact resistance

Ideal for low level switching as well as up to 10 amp duty

Positive tactile feedback

Product Specifications:

Electrical: (at 28VDC or 115VAC, 60/400 Hz.)

Load / Amperes / Life (Normal)

Resistive / 10 / 25,000 cycles

Inductive/Motor / 5 / 25,000 cycles

Lamp / 5 / 25,000 cycles

Slick magnetos by CHAMPION AEROSPACE are used on nearly all aircraft piston engines. They exhibit distinct design and operational features outlined below ensuring improved performance and service life.

Smaller and lighter unique design

Radio noise suppression

Lift-off housing

Easy to maintain

OEM Approved for more than 225,000 aviation engines

Service at 500-hour intervals (*)

CHAMPION AEROSPACE Slick magnetos are offered in NEW or FACTORY OVERHAULED condition (**) in a broad range of options. Both can be supplied as exchange units to returned cores and include genuine OEM parts produced and inspected under rigorous procedures to ensure airworthiness and suitability in Slick magnetos. The factory overhauled magnetos are sourced by CHAMPION AEROSPACE authorized overhauling stations and adhere to strict CHAMPION AEROSPACE restrictions on the use of parts and service literature.

For additional information please refer to the Product Description section and the supplied documentation.

(*) In accordance with CHAMPION AEROSPACE Overhaul Manual L-1363F, the magneto should be overhauled at TBO, lightning strike, prop strike, sudden stoppage of the engine and immersion of the aircraft.

(**) NEW EXCHANGE or FACTORY OVERHAULED EXCHAGE Slick magnetos are offered in exchange of an existing customer owned unit (core) for a quick turn around. A refundable core charge is included in the selling price. This is refunded or credited towards future orders with us when a qualified core is returned and its condition is approved by our co-operating supplier within 60 days of the date of the purchase invoice. As a general rule, approvals of core returns for FACTORY OVERHAULED Slick magnetos are granted to cores of the current series of these magnetos while for NEW EXCHANGE Slick Magnetos, cores of older series of Slick magnetos can be considered for credit on a case by case basis. In all cases, the approval of a returned core remains at the exclusive discretion of our co-operating supplier and shipping back to the customer of non-approved cores are subject to additional charges.

AIRFRAMES ALASKA designs and manufactures ALASKAN BUSHWHEEL (ABI) wheels & brakes and tires made for flying and landing off-field in the most rugged backcountry conditions. ABI tires absorb the energy of rough landings, taking the brunt of the impact off the pilots, wheels, gear, and airframe. Unlike your standard aircraft tires, Bushwheels are tubeless. This distinctive design eliminates the problem of tire slippage and stem shearing and makes it possible to run these tires at very low PSI. Different models are offered to suit needs of aircraft operating conditions. ABI tires are FAA TSO C62d approved. Models are available in the following versions and fit standard 6" wheels unless otherwise mentioned:

Standard thread: 3/16"

Heavy thread: 1/4". Heavy tread 26" ABI tires are constructed with a thicker tread layer. Suitable for pilots operating their aircraft on pavement between backcountry flights.

The 26" ABI tires are designed and handcrafted for use on lighter aircraft such as Cessna 182 & Cessna 206. They're also the ideal "entry level" bush tires for pilots upgrading from standard tube type aviation tires for the first time.

A step up in terms of size, 29" ABI tires have a slighter profile and create less drag than larger Bushwheels. This places these bush tires in size/weight sweet spot for heavier aircraft like Cessna and Maule while still providing the footprint and energy absorption critical in bush landings. 

The 31" ABI tires are handcrafted featuring an impressive ratio of weight to size. Their solid footprint makes these bush tires the de facto standard for bush pilots.

The 35" ABI tires are designed for the most rugged off-airport operations. They require ABI 10650 10" wheels.

The 35" Beaver ABI tires stand up to the heavier load of de Havilland Beaver and Pilatus aircraft with a gross weight up to 5600 lbs (2800 static load rating per tire).

Manufactured to the highest standards, the Andair standard fuel selector range incorporates 1/4"(FS16), 3/8"(FS20) and the 1/2"(FS25) valves. These valves allow for multiple tank switching of one fuel line. Duplex fuel selectors are also offered  (see separate product presentations). FS16, FS20 and FS25 series of fuel selectors are designed for safety, provide a precise and smooth feel in operation  and come in different types, ranging from Type 1 ON/OFF shut off valves to valves with multiple positions. To prevent the pilot switching the wrong tank or turning the fuel off they feature  a large red lever with 'Fuel' engraved on it and a clearly labelled fascia plate to indicate which tank has been selected. It allows for a good solid detent at each tank position and also the button on top of the lever must be raised to switch the fuel off.

FS25 series 1/2" fuel selectors has been designed for engines up to 560 HP (50+ GHP), provides a choice of fittings and all units can be operated with an extension and universal joints. They come in the following types:

Type 1 (FS25-1): ON / OFF Shut Off valve for 1/2" fuel lines. There is a 90 degree action between the two positions and included with the valve is the safety button. 

Type 2 (FS25-2): Three way 3/8” fuel selector with positions LEFT-RIGHT-OFF and a 90 degree action between each tank selection. No lower fitting for use where there is little space behind the valve. 

Type 3 (FS25-3): Three way selector with positions LEFT - RIGHT - OFF. No lower fitting. This valve has inlets ports at the Left and Right hand side and the outlet towards the front.

Type 4 (FS25-4): Designed for high wing aircraft, it has four lever positions OFF - LEFT - BOTH – RIGHT with a 90 degree action between each position.There are 3 ports. The lower port is the outlet to the engine and can be Male AN-8, Female 3/8 NPT or a  360 degree Banjo adjustable fitting with a male AN-8 end.

Type 5 (FS25-5): 4 way Fuel Selector ( 3 tanks and OFF ) with positions LEFT - MAIN - RIGHT - OFF, each at 90 degree intervals. The inlet ports are around the side of the valve and the outlet is at the bottom of the valve.

For additional information please refer to the product presentations, the supplied documentation or contact us.

STOMIL-POZNAŃ S.A. is a tire manufacturer producing All-Terrain (AT) tires designed to perform on- and off-road, providing traction and comfort in different surface conditions. STOMIL tires are used in aviation as well other sectors such as the mining industry. STOMIL tires are installed in most Polish gliders and aircraft including; Jantar, Puchaz, PW–5, etc. They are offered in different versions (Wersja) and sizes with  350x135, 200x80 and 255x110 being the most popular ones. Different STOMIL tubes are also offered for use with the company tires.

For additional information please refer to  the supplied documentation.