Textron Lycoming Engine Part. Key, Valve Exhaust. FAA Certified.

The AVIASPORT indicators (gauges) are reliable, accurate and solid, combining the accumulated experience of more than twenty years with the latest technology  They have been designed for ROTAX engines and their display areas are divided into red, green and yellow zones in line with Rotax limits. They use a pointer that turns 240º or 320º, providing high resolution. AVIASPORT range of gauges includes CHT, EGT, tachometers, oil and fuel pressure, oil and coolant temperature, fuel level, voltmeters & ammeters and offered with casings of different sizes: 80mm; 57mm and 52mm.

AVIASPORT Oil Pressure indicators (gauges) are designed specifically for ROTAX 912/914 aircraft engines with painted red, green, and yellow gauge markings. are available in two sizes: 52 and 57 mm. They are offered in two unit versions for readings in PSI or Bars. They work with different pressure sensors depending on these installed in ROTAX 912/914 engines: the VDO sensor (Before September 2008) or the 4..20mA sensor (after 2008).

AMT NETHERLANDS  designs and manufactures high performance gas turbine engines in different series with different specifications, start system options and delivered thrust ratings.  AMT Olympus Series HP gas turbine engines deliver 230 N at 108.500 RPM. They are offered in E-start or AIR start (10-12 Bar) configuration, with propane start or kerosene start system and with or without the Engine Data Terminal (EDT). A spinoff of the Olympus HP is being certified by EASA for the use as a "bringing home device" for a full size glider. For additional information, please refer to the supplied documentation or contact us. 

HONEYWELL AEROSPACE seals are engine parts widely used in aerospace applications. They are also available as FAA-PMA parts from other manufacturers. Supply of the specific parts can be effected either as OEM part numbers or any of respective FAA-PMA  part numbers subject to their availability by our suppliers.

P/N: 2-300-778-01 Fuel Manifold Gasket Seal is used in combustor turbine modules. It is also available as FAA-PMA part with alternative P/N: DEC2-300-778-01 by HEICO AEROSPACE and P/N: NK1004054-10 by EATON CORPORATION. 

Miscellaneous OEM special tooling / equipment used for the maintenance & repair of aircraft piston and turbine engines. Used by airline companies  and Aircraft Maintenance, Repair and Overhaul facilities (MROs) in various applications. Available in NEW or USED conditions.  For additional information please consult the supplied documentation or contact us for non listed tools.

AMT NETHERLANDS  designs and manufactures high performance gas turbine engines in different series with different specifications, start system options and delivered thrust ratings.  AMT LYNX Gas Turbines are only manufactured in E-start cofiguration with an direct kerosene starting system. They are offered in EPV layout and include the Engine Data Terminal. They deliver 1.569 N at 46.000 RPM. For additional information, please refer to the supplied documentation or contact us. 

WELDON J Series FAA-PMA fuel pumps work with different fluids including gasoline, jet fuels, diesel fuel and oils. They can be used (depending on selected pump) for a variery of applications including emergency fuel boost, priming injected engines and others.

Appearing prices include core charges for no core reurn.

Champion Aerospace designs and manufactures Champion-brand piston-engine ignition components for both OEM and aftermarket for general aviation aircraft applications. Every Champion spark plug manufactured has built-in design advantages that assure longer life and greater reliability. They are manufactured within all military and commercial standards established for aviation spark plugs. All plug types are designed to meet specific engine and aircraft requirements for thread size, reach, heat rating, shielding and terminal connection.

Champion Aerospace Spark Plug Part Number with symbol explanation:

1. Resistor None--No Resistor     R--Mil-Spec. Resistor-Erosion protection

2. Barrel Style None -- Unshielded     E -- Shielded 5/8"-24 Thread     H -- Shielded 3/4"-20 Thread (All Weather Plug)

3. Mounting Thread -- Reach -- Hex Size     B-18mm 13/16" / 2.06cm 7/8" / 2.22cm     M--18mm 1/2"/1.27cm 7/8"/2.22cm     L-14mm 1/2"/1.27cm 13/16/2.06cm U­18mm 1-1/8"/2.85cm 13/16/2.06cm     J -- 14mm 3/8"/0.95cm 13/16/2.06cm

4. Heat Rating Position Low number--cold     High number--hot

5. Electrode Design None-Conventional single     E -- Two prong massive     N -- 4 prong massive     W -- Fine wire (Iridium)     B --2 prong massive, Tangent to Center     P--Fine wire (Platinum)

AMT NETHERLANDS  designs and manufactures high performance gas turbine engines in different series with different specifications, start system options and delivered thrust ratings.  AMT NIKE Gas Turbines are only manufactured in E-start cofiguration with an direct kerosene starting system. They are offered in EPV layout and include the Engine Data Terminal. For additional information, please refer to the supplied documentation or contact us. 

These inserts are for use in Textron Lycoming aircraft engines. Supplied with our own Certificate of Conformance. If additional certification is required, please contact us as a respective charge may apply.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Revolution Counters (Tachometers)/HOBBS meters are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from BRP-ROTAX® but also from other manufacturers.  Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

The FLASH propeller range manufactured by Duc Hélices feature an innovative design, specifically about its twisting axis and center of pressure.Their aerodynamic design allows a "constant speed" effect, limiting variations in engine speed between on ground and in flight. They also enable high efficiency throughout the flight envelope, improved takeoff and climb rate due to higher engine speed, high cruise extension in flight, high engine efficiency and user comfort.

The blades and the hub of the FLASH propeller range are manufactured according the DUC Hélices company technologies, from unidirectional layers of carbon fibers prepreg epoxy resin. Their composite structures are defined to obtain the maximum stresses in torsion and bending. Therefore "constant speed" effect is not related to deformation of the blade but its geometry and specific profile. Due to its specific geometric definition, excellent performance is obtained in both aerodynamic and acoustic, but also in consumption. The leading edge of the FLASH blades is equipped with a metallic shielding in Inconel®, a refractory stainless material with a very high surface hardness.

Depending on the model, FLASH propellers are offered with two, three or four blades, in tractor or pusher configurations (right & left rotation) and different diameters. 

For additional information please refer to the supplied documentation.

EXXONMOBIL® Mobil Turbo 319A-2 is a fully synthetic lubricant developed to meet the performance requirements of Russian gas turbine aircraft engines which operate on mineral-oil-based lubricants. Formulated from a synthetic hydrocarbon combination of polyalphaolefin (PAO) and hindered ester based stock, Mobil Turbo 319A-2 is fortified with a unique chemical additive system. The resulting product has far superior thermal and oxidation stability than mineral-oil-based lubricants. The ability of Mobil Turbo 319A-2 to resist deterioration and deposit formation allows the potential for extended oil drain intervals and less frequent maintenance.

The closely controlled viscosity of Mobil Turbo 319A-2 at -51º C, along with a -60ºC pour point, ensure good low-temperature fluidity, permitting engine starting and lubrication at low temperatures. Mobil Turbo 319A-2 exhibits excellent bulk oil stability at temperatures up to 200º C (392º F). The evaporation rate of Mobil Turbo 319A-2 at high temperatures is significantly lower than mineral-oil-based products, and helps minimize oil consumption. The lubricant has excellent resistance to foaming.

Product Features and Benefits :

- Low evaporation loss and oil consumption

- Reduced sludge and carbon deposits

- Improved bulk oil oxidation stability and extended oil drain intervals

- Compatible with existing seal materials

- Reduced engine maintenance, including potential for extended drain intervals

Applications :

Mobil Turbo 319A-2 is recommended for aircraft gas turbine engines that normally operate on mineral-oil-based lubricants, as well as engines approved to operate on oils meeting the specifications listed below.

Mobil Turbo 319A-2 is approved against the following specification of the Russian Central Institute of Aeronautical Motors (CIAM):

- IMP-10

- MS, 8P, MS-8RK 36/1 Ku-A

- VNII NP 50-1-4f and -4u

- B3V and LZ-240

- Mobil Turbo 319A-2 also meets U.S. Military Specification MIL-L-6081C, as well as the essential performance requirements of U.S. MIL-L-7808K, Grade 3.

For additional information please consult the supplied documentation or contact us.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different vacuum pumps are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. The RAPCO FAA/PMA'd vacuum pump, RA215CC  is used in ROTAX® 912 UL, 912 ULS and 914 UL engines. Please refer to the separate product presentation for RAPCO Dry Air Pumps for vacuum or pressure system applications.

Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft. They form part of  BRP-Powertrain GmbH & Co. KG product portfolio which also includes engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles & carts.

The BRP-ROTAX® 915 iS series are turbo charged four cylinder aircraft engines offered in non-certified (915 iSA)  and EASA CS-E certified models (915 iScA). These engines are also offered for 24V power aircraft supply systems. The respective models are  915 iSA C24  (non-certified) and 915 iScA C24 (EASA CS-E certified). These engines are suitable for aircraft equipped with a constant speed propeller or a fixed pitch propeller.

Different options are also available and can be supplied with the engine at additional cost.  They can only be ordered at the time of ordering of the respective engine(s). For additional information please refer to the supplied documentation.

915 iS Series Engine Features:

Performance: 99 kw at 5500 1/min, 104 kw at 5800 1/min (max. 5 min)

four cylinder engine

liquid cooled cylinder heads, air cooled cylinders

integrated reduction gearbox i = 2,54 (915 iSA /915 iScA)

integrated reduction gearbox i = 2,54, version 2 or 3 (915 iSA C24/915 iScA C24)

slipper clutch for reduction gearbox

electric starter + starter relay

engine control unit (ECU)

double elecrtonic system with two voltage regulators

double electronic fuel injection system

turbocharger with electronic controlled wastegate

expansion tank 922668

stainless steel exhaust system

oil filter, oil tank, without tubes

airbox

engine truss assembly (Assy) without silent block

intercooler

aircraft power supply 24V/800W (915 iSA C24/915 iScA C24)

Available Options (supplied with the engine):

air guide baffle installed

2 electrical fuel pumps

silicon water hoses

starter 24V

NOTE: Options are additionally charged and must be specified at the time of ordering. They can only be ordered with the respective engine(s).

RS FLIGHT SYSTEMS develops and manufactures avionics for general aviation and flight test equipment. RS FLIGHT SYSTEMS range of avionics includes Engine Management Units for Rotax 912 iS / 915 iS engines, engine panels, automatic propeller speed control unit (SCU), and SCU front panel, iS Data Recorder for Rotax iS engines (912iS / 915iS / 916iS), control panels, portable test bench for independent drive of BRP Rotax iS engines, real-time wind indication system, Fly by wire control sticks, CANaerospace based flight test instrumentation  and more. 

The RS FLIGHT SYSTEMS 2nd generation ROTAX® 912iS/915iS Engine Management Units (EMU) include 2 cockpit mounted engine monitoring, data logging & propeller control devices, EMU 912iS evo & EMU 9xiS. Both feature the same hardware, software and functionality but differ in dimensions and weight. They integrate seamlessly into the Rotax 912iS/915iS engine wiring harness, providing indications of all available engine parameters, engine status, ECU faults and additional sensor inputs. Suitable for 14 V and 28 V aircraft electrical systems with minimum installation effort. Configurable for use with different unit systems. Additional features: sunlight-readable backlit display, dual optically isolated CANaerospace data bus interfaces for retained redundancy, continuous monitoring and health checking of both ECU display buses, georeferenced data recording of all parameters at 10 Hz over up to 2,000 hours, simple data transfer & software update via an integrated memory card slot, sophisticated visualization & processing tool for recorded data, Google Earth file export of recorded data inc. GNSS and engine data. Wiring Harness Kit (incl. power supply wires) is also available (sold separately). A separate module (sold separately) provides connection to 912/914 carburetor Rotax engines.

For more information on RS FLIGHT SYSTEMS products please consult the Product Description section and the supplied documentation.

The 730/830 Engine Monitoring Systems (EDM) from JP INSTRUMENTS revolutionize engine monitoring by the compact size integration of a full color graphical LCD display with the extremely popular EDM 700/800 series functionally. Both 730 and 830 EDMs feature: colourful graphics, larger data display for easy reading, parameters in full colour, annunciation of exceedances, less page swapping, more data per page. The units are "Plug and Play" compatible with existing EDM-700/800 units. Oil pressure has also been added to the entire EDM series line.  Both 730 and 830 are FAA approved for use as secondary engine monitors. However they CANNOT BE USED as a replacement for primary gauges which have to be maintained. Different options and accessories are also available at additional cost.

These nozzle assemblies are for use in Textron Lycoming aircraft engines. Supplied with our own Certificate of Conformance. If additional certification is required, please contact us as a respective charge may apply.

The DUKES AEROSPACE Inc. is a manufacturer of  fuel pumps for general aviation and corporate aircraft.  DUKES fuel pumps are used in a range of aircraft such as Beechcraft, Cessna, Diamond, Maule, Mooney, Lake and Navion aircraft. The company is a subsidiary of AERO FLUID PPRODUCTS, part of TransDigm Group Inc.

The DUKES AEROSPACE fuel pumps are offered as NEW, OVERHAULED or OVERHAULED EXCHAGE (in the second case, in exchange of existing customer owned unit (core) for a quick turn around). Overhaul pumps are serviced in accordance with FAA-approved process specification and certified (FAA Form 8130-3) by authorized repair stations such as QUALITY AIRCRAFT ACCESSORIES, the exclusive DUKES AEROSPACE  authorized overhaul facility for General Aviation fuel pumps,  RAPCO FLEET SUPPORT SERVICES division or CJ AVIATION. In the case of exchanged pumps,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a serviceable condition. 

Additionally, FAA-PMA approved direct replacement fuel pumps to the respective DUKES AEROSPACE  models are offered. They are made by reputable manufacturers such as CJ AVIATION and offered as NEW or NEW EXCHANGE (please refer to their separate product presentations). For additional information please consult the supplied documentation of our offered products (*) or contact us.

(*) The supplied documentation is to be used for reference only. When selecting a part for installation, consult the appropriate aircraft maintenace manual, parts catalogue, or equipment list for approved data.

MWfly SPIRIT SKY LINE non-cerified Aeronautic Engines are 4-cylinder horizontally opposed (boxer type) liquid cooled motors manufactured to the highest standards to meet application requirements in a wide range of LSA and experimental single-engine or twin-engine airplanes and other aircraft (STOL, helicopters, gyrocopters, hang gliders, seaplanes and drones). These engines have been designed for long-distance touring use and can be supplied with clockwise or anticlockwise rotation, both in tractor and pushing configurations. Rotation is designated by the letters "R" or "L" at the engine model code. The rotation must be specified at the time of ordering. Their large displacement, combined with the high torque values obtained at low rpm, guarantees great flight comfort and low fuel consumption.

SPIRIT SKY LINE different models are offered with direct or geared drive transmissions (depending on the model) and deliver 100, 122, 135 & 140 HP.

MWfly SPIRIT SKY LINE engines come with many accessories as standard while additional engine accessories (sold separately) are also available (please refer to the Product Description).

For additional information please refer to the attached brief presentation of MWfly engines, the engine comparison chart  or contact us for customized solutions to your projects.