The Olympus HP (High Performance) Gas Turbine features totally re-designed Compressor, Diffuser and Turbines stages, producing a massive power increase (23,5 Kg / 51.7Lbs ), without reducing the legendary reliability and incredibly fast throttle response of AMT NETHERLANDS turbines. Like all AMT NETHERLANDS the Olympus HP is available with manual or auto Air-start, as well as fully automatic electric starting.
Product Specifications:
(All data at STP +/- 2%, S.T.P. : 15 Degrees Celsius / 59 Degrees Fahrenheit, Pressure : 1013 Mbar / 29.91 in)
Engine diameter 130 mm / 5.1 Inch
Engine length 374 mm / 14.7 Inch
Engine weight 2900 gram / 6.4 Lbs
System airborne weight * 3845 gram / 8,5 Lbs
Thrust at S.T.P. ** 230 N / 51.7 Lbf
Maximum RPM 108.500 / 108.500
Thrust at Idle RPM 13 N / 2.9 Lbf
Pressure ratio 3.8:1 / 3.8:1
Mass flow 450 Gr/sec / 0.99 Lb/Sec
Max continues EGT 750 Deg C / 1380 Deg F
Fuel consumption 640 Gr/min / 22,5 oz/min
Specific fuel consumption 46,4 gr/(Kn*sec) / 1,64 lb/(lbf*hr)
Starting method Direct kerosene starting gas turbine, on request propane start.
* Total weight of; Engine,ECU,pump,battery,thermosensor, valves, mounting straps.
** On request the RPM can be raised to 110.000 RPM giving 10 Newton additional thrust.
Operating conditions
Min operation temperature * - 25 Deg. Celsius / -13 Deg F
Maximum operating temperature + 50 Deg. Celsius / +122 Deg F
Maximum operating altitude 8000 Meter / 26250 feet
Maximum operating speed 1000 Km / hour / 620 Mile / hour
* With the use of LiPo batteries the minimum operation temperature is limited to -10 Deg Celsius.
Engine control possibilities
1 x RS232 Throttle and switch settings including special functions *
2 x PWM between 1-2 milliseconds ** Throttle and switch settings (special functions * with push button)
2 x Analog inputs 0-5 volt DC ** Throttle and switch settings (special functions * with push button)
* Activation of prime function, igniter function, starter function, speed cool.
** Specify ECU at ordering with PWM inputs or Analog inputs.
