SOCOMORE® produces waterbased and gel type aerospace cleaners which can be used for cleaning of aircraft exteriors and parts.  MAGCHEM® is a sister company of SOCOMORE® producing solutions for the preparation protection of metal surfaces or composite materials in the construction and maintenance of the transport industries including solutions for aerospace cleaning, surface preparation and metalworking processes. MAGCHEM® product range includes all-purpose cleaners, liquid detergents, paint removers, degreasing solvents, deoxidizers, and others.

For additional information and specifications please refer to the supplied documentation.

CONNTECT® produces and supplies combustion turbine fuel additives, compressor cleaners & wash systems and related products. CONNTECT® gas turbine compressor cleaners include CONNTECT® 5000, 6000, 7000 and CONNTECT® AF-100 anti-icing fluid for use with all CONNTECT® compressor cleaners. They are suitable for both ON LINE and OFF LINE use while ceaners can be injected directly into the compressor while the turbine is operating ON LINE extending periodic OFF LINE cleaning intervals and reducing average power loss. Available in 5-gallon pails, 55-gallon (208-liter) drums and 330-gallon re-usable and disposable bulk containers (totes).

CONNTECT® 5000 - concentrated water based gas turbine compressor cleaner specifically designed to remove deposits commonly found on gas turbine compressor blades.

CONNTECT® 6000 - concentrated non-toxic high performance low foam water based gas turbine compressor cleaner with cleaning efficiency similar to solvent-based cleaners.

CONNTECT® 7000 - concentrated solvent-based gas turbine compressor cleaner. The combination of non-ionic surfactants, emulsifiers and organic solvents is specifically designed to remove deposits commonly found on gas turbine compressor blades including carbonaceous deposits, oil, grease and soot. It should not be used undiluted.

The ash free ingredients in CONNTECT® cleaners have been carefully selected to ensure that no incremental trace elements can contribute to corrosion of the hot section of the gas turbine, while they contain special inhibitors to ensure compatibility with aluminum, nickel, nickel-cadmium, stainless steel, titanium and common coatings including painted surfaces and elastomers. They can be generally mixed at 1 part cleaner to 4 parts water but the method of injection and total amount of cleaning solution required differs for ON LINE and OFF LINE cleaning.

CONNTECT® AF-100 is a superior quality, specially designed propylene glycol based gas turbine anti-icing fluid for use with all CONNTECT® compressor cleaners. It is non-hazardous, non-toxic and biodegradable. High purity, ash free product insuring no incremental contamination of the hot section of the turbine.  Depending upon the percentage of AF-100 used, the freezing temperature of the cleaning or rinsing solution can be reduced down to -22 deg. F (-30 deg. C). However, its viscosity increases significantly at cold temperatures should not be mixed with cleaner or water when the  product is very cold.

LVP POWDER & PAINTS (LVP), a subsidiary company of the Crosslink Powder Coating Corporation, is manufacturer of touch up paints & reseller of powder coating powders. The latter are produced from popular brands like PPG, Tiger Drylac, IFS, Sherwin Williams and Cardinal Paints. LVP Touch Up Paints use an acrylic enamel which offers powerful surface protection from a single component. This quick dry enamel is especially useful for products made out of metal and plastic like industrial equipment, furniture, household products, and machinery. Unlike most cheap generic paint products, LVP paints offer a outstanding film hardness and exterior durability allowing quick coating, packing and shipping without compromising the integrity of the equipment. LVP touch up paints’ features & benefits include:

Fast drying: To Touch: (15-30/min) To Handle:(1-2/hours) 

Excellent flow and leveling

Excellent adhesion

Can be applied direct-to-metal

Compatible over a variety of primers

Available in a wide-range of custom colors

Can be aerosol applied

Designed for exterior performance

Available in different color standards RAL | FED-STD-595 | AMS-STD-595

Markets: Powder Coating Products | Fabricated Metal | Industrial Equipment | Telecommunications | Material Handling | Heavy Duty Equipment | Agriculture Equipment | Household Furniture

For additional information on LVP powder coating and painting products please consult the supplied documentation.

Different aircraft engine firewall sealants are included in this presentation while other PPG AEROSPACE® products are separately presented.

PPG AEROSPACE® PR-812 is a high temperature primerless firewall sealant. It is a two-part, synthetic rubber compound designed for sealing firewall structures against the passage of air and vapours.

The uncured material is a low sag paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant to common aircraft substrate. It has a service temperature range from -54°C (-65°F) to 204°C (400°F), and will withstand flash temperatures of 1093°C (2000°F). HAZARDOUS MATERIAL.

PPG AEROSPACE® Pro-Seal P/S 700 Firewall Sealant is a high temperature two-part, synthetic rubber compound primerless firewall sealant. It has a service temperature range from -65°F (-54°C) to 400°F (204°C, with withstand flash temperatures of 2000°F (1093°C). The material is designed for sealing firewall structures against the passage of air and vapors.The uncured material is a low sag paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant to common aircraft substrates. Its storage life is at least 12 months when stored at temperatures below 80 °F ( 27 °C) in original, unopened containers. Meets MIL-S-38249 TYPE 1 and AMS3374 Type 4. Alternates with CS1900 and PRS12. Black color. Supplied in a two-part can kit and two-part SEMKIT® injection kits. HAZARDOUS MATERIAL.

Please refer to the attached documentation for additional information.

EXXONMOBIL® Mobil Avrex™ S Turbo 256  Gas Turbine Lubricant is a combination of a highly stable synthetic base fluid and a unique chemical additive package. Thecombination provides outstanding thermal and oxidative stability to resist deterioration and deposit formation in both the liquid and vapor phases, as well as excellent resistance to foaming. The effective operating range of this lubricant is between -54°C and 176°C (-65°F and 350°F). The pour point is below -60°C (-75°F). The product has a high specific heat in order to ensure good heat transfer from oil-cooledengine parts. In extensive laboratory testing and in-flight performance, Mobil Avrex™ S Turbo 256  exhibits excellent bulk oil stability at temperaturesup to 176°C (350°F). The evaporation rate at these temperatures is low enoughto prevent excessive loss of volume. It is uniquely suited for use when extreme low temperatures restrict the use of higher viscosity engine oils

Mobil Avrex™ S Turbo 256 Gas Turbine Lubricant (QPL listed as RM 248A) is recommended for aircraft gas turbine engines in commercial and military service, particularly where start-up temperatures are below -40°C (-40°F). The product is approved against U.S. Military Specification MIL-PRF-7808, Grade 3 while it is also compatible with other synthetic gas turbine lubricants meeting MIL-PRF-7808 or MIL-PRF-23699 specifications (*). The product is compatible with all metals used in gas turbine construction, as well as with F rubber (Viton A), H rubber (Buna N), and FVMQ rubber (fluorosilicone).

(*) Mixing of Mobil Avrex™ S Turbo 256 Gas turbine lubricant  with other products is not recommended because the blend may result in some loss of its performance characteristics.

AEROSHELL®  Turbine Oil 390 is a 3 mm2/s synthetic diester oil incorporating a carefully selected and balanced combination of additives to improve thermal and oxidation stability and to increase the load carrying ability of the base oil. It is specifically designed for use in air and gas turbines, aircraft turbines and other turbine-driven machinery operating under extreme conditions such as high temperatures and pressure. AEROSHELL®  Turbine Oil 390 features high thermal stability, good protection against oxidation, protection against wear and corrosion as well as a high viscosity index and a low freezing point enabling it to continue to work at high temperatures maintaining its film thickness without freezing at low temperatures. Developed primarily as an improved 3 mm2/s oil for British turbo-jet engines this oil is also used in auxiliary power units (APU) in order to overcome the effects of cold soak due to its low temperature characteristics.

AEROSHELL®  Turbine Oil 390 and other synthetic turbine lubricating oils such as  MOBIL TURBO Oil 319-A-2 or HP-928 can be considered as equivalent to NYCO TURBONYCOIL 210A and they are approved by CIAM as analogues to oils of Russian specifications IPM-10 (TU 38.101299-90) enabling their use in various aircraft like IL-86, 96-300, TU-204, 214, MIG-23, 27, 29, 31, SU-25, 27, and 30.

Product Specifications:

• Oil Type: Synthetic Diester

• Density at 15°C: 0.924 kg/l

• Kinematic viscosity at 100°C: 3.4 mm2/s

• Pour Point: -68°C

• Flash Point: 225°C

Approvals / Qualifications:

• Def Stan 91-94 (British)

• IPM-10, VNII NP 50-1 4f and 4u, and 36Ku-A (Russian analogue)

• Joint Service Designation OX-7

• Honeywell APU Series: 131, GTCP 30, 36, 85, 331 and 660; RE100, 220; HGT 400, 750 and 1700 

• Pratt & Whitney AeroPower (formerly Hamilton Sundstrand): APS 500, 1000, 2000, 3000, 5000 

• Pratt & Whitney Canada: PW901A/C and PW980 APUs 

• Rolls-Royce: Conway, Spey, Tay, M45H

• Safran Helicopter Engines (formerly Turbomeca): Artouste III, Bastan, Turmo, AST 950 / Approved with restrictions*: Ardiden, Arriel, Arrius, Artouste, TM333, AST 600, Astazou, Makila, Marbore 6

NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to our AEROSHELL® Aviation Lubricants Product Overview presentation or contact us for additional information or assistance on non listed products.

EXXONMOBIL® Mobil Turbo 319A-2 is a fully synthetic lubricant developed to meet the performance requirements of Russian gas turbine aircraft engines which operate on mineral-oil-based lubricants. Formulated from a synthetic hydrocarbon combination of polyalphaolefin (PAO) and hindered ester based stock, Mobil Turbo 319A-2 is fortified with a unique chemical additive system. The resulting product has far superior thermal and oxidation stability than mineral-oil-based lubricants. The ability of Mobil Turbo 319A-2 to resist deterioration and deposit formation allows the potential for extended oil drain intervals and less frequent maintenance.

The closely controlled viscosity of Mobil Turbo 319A-2 at -51º C, along with a -60ºC pour point, ensure good low-temperature fluidity, permitting engine starting and lubrication at low temperatures. Mobil Turbo 319A-2 exhibits excellent bulk oil stability at temperatures up to 200º C (392º F). The evaporation rate of Mobil Turbo 319A-2 at high temperatures is significantly lower than mineral-oil-based products, and helps minimize oil consumption. The lubricant has excellent resistance to foaming.

Product Features and Benefits :

- Low evaporation loss and oil consumption

- Reduced sludge and carbon deposits

- Improved bulk oil oxidation stability and extended oil drain intervals

- Compatible with existing seal materials

- Reduced engine maintenance, including potential for extended drain intervals

Applications :

Mobil Turbo 319A-2 is recommended for aircraft gas turbine engines that normally operate on mineral-oil-based lubricants, as well as engines approved to operate on oils meeting the specifications listed below.

Mobil Turbo 319A-2 is approved against the following specification of the Russian Central Institute of Aeronautical Motors (CIAM):

- IMP-10

- MS, 8P, MS-8RK 36/1 Ku-A

- VNII NP 50-1-4f and -4u

- B3V and LZ-240

- Mobil Turbo 319A-2 also meets U.S. Military Specification MIL-L-6081C, as well as the essential performance requirements of U.S. MIL-L-7808K, Grade 3.

For additional information please consult the supplied documentation or contact us.

TOTALENERGIES (formerly TOTAL) AeroGear 823 is an extreme pressure mineral oil for helicopter gears.

It features excellent resistance to high loads and shocks, anti-corrosion and anti-rust as well as antifoaming capabilities.

It is intended for lubrication use of highly stressed helicopter gears.

TOTALENERGIES AeroGear 823 is certified by DCSEA 255/A and EUROCOPTER and conforms with the following specifications:

- US: meets MIL-PRF-6086E (Medium grade)*

- UK: DEF-STAN 91-112/1*

- Joint Service Designation: OEP-70

- NATO code: O-155.

Offered in 5-liter containers and drums.

For additional information please contact us.

PPG AEROSPACE® Corrosion Inhibitive Aircraft Sealants & Jointing Compounds include different products offered in different packings.

PPG AEROSPACE® P/S (Pro Seal) 870 Corrosion Inhibitive Sealants are two-part, manganese dioxide cured polysulfide compounds.  They have a service temperature range from -65°F (-54°C) to 250­°F (121°C), with intermittent excursions up to 275° (135°C). They act as an effective barrier against the common causes of corrosion on the aluminum alloys or between dissimilar metals. The cured sealant maintains elastomeric properties after limited exposure to both jet fuel and aviation gas. Offered in A, B & C classes.

P/S 870 Class A uncured material is suitable for application by brush in thickness up to 25 mils. It cures at room temperatures to form a resilient sealant having excellent adhesion to common aircraft substrates. Supplied in two-part kits and Semco® cartridges.

P/S 870 Class B uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. Available in two-part kits or Semkit® cartridges. 

P/S 870 Class C uncured material is designed for roller and faying surface sealing applications. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. Available in two-part kits and Semco® cartridges.

PPG AEROSPACE® Proseal P/S 890 Class A and B are aircraft integral fuel tank sealants. They have a service temperature range from -65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). Proseal P/S 890 Class A is designed for brush and fay sealing of fuel tanks and other aircraft fuselge sealing applications. Proseal P/S 890 Class B  is designed for fillet sealing of fuel tanks and other aircraft fuselage sealing applications. The cured sealants maintain excellent elastomeric properties after prolonged exposure to both jet fuel and aviation gas.  Both are two-part, manganese dioxide cured polysulfide compounds. In the case of Proseal P/S 890 Class A, the uncured material is suitable for applicaiton by brush in thickness up to 25 mils. In the case of Proseal P/S 890 Class B, the uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. Both cure at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. PPG AEROSPACE® Proseal P/S 890 Class A and B  sealants are supplied in two-part kits and Semco® cartridges.

PPG AEROSPACE® JC5A Corrosion Inhibitive Jointing Compound is a versatile one-part, non-curing compound designed specifically for the aviation industry. Engineered to prevent corrosion and moisture ingress, JC5A is ideal for safeguarding removable fasteners and assemblies. 

Please refer to the Product Description section and the supplied documentation for additional information.

CORROSION TECHNOLOGIES manufactures a complete line of anti-corrosion, cleaning and maintenance, and other specialty chemical products and application equipment, including the CorrosionX® line of corrosion prevention and lubrication products. Their products are intended for an extensive range of uses (from military, aviation and aerospace, marine, automotive and RV, to industrial, agricultural, soil stabilization and dust suppression, sporting goods, R/C, firearms, fishing and home improvement / general purpose). Apart from CorrosionX®, other brands include RejeX® high gloss finishes, ReelX® fishing reel lubricants, SpeedX® extreme pressure lubricants and Ground Glue™ for soil stabilization, erosion and dust control.

CORROSION TECHNOLOGIES CorrosionX® MIL-PRF-81309H  Type II & IV Aviation Corrosion Prevention & Control Compound is specially formulated to displace moisture, stop corrosion instantly and provide long-lasting protection. Intended for use on airframes and general purpose uses.

CORROSION TECHNOLOGIES range of firearm cleaning and maintenance products for military and shooting sports' applications include CorrosionX® Mil Spec "Ultimate CLP" for firearms of all kinds, providing nearly 2X the load carrying capacity and more corrosion protection than any other firearm lubricant, Bore Cleaner, a Mil Spec quality gun bore cleaner and powder solvent, CorrosionX® Extended Duty (XD), a medium build corrosion preventive coating and CorrosionX® Heavy Duty (HD) corrosion preventive coating as well as CorrosionX® Grease a high-specification, high load bearing grease

For additional information please consult the Product Description section & the supplied documentation.

Thermal fluids (aka thermal oils, thermic fluids, thermo fluids, heat transfer fluids, heat transfer oils, hot oils, thermic oils or thermo oils.) are specialized liquids used to transfer heat from one point to another in various industrial processes, including chemical processing, oil and gas refining, and power generation. Designed to operate at high temperatures they can provide efficient and reliable heat transfer, even under extreme conditions. Selecting the right transfer fluid depends on its thermal properties, which include its viscosity, heat capacity, the heating system it’s used in, and the application itself.  When dealing with complex applications that may have multiple heat transfer options and therefore specific calculations may be required. Factors such as the temperature and pressure requirements of the application, combined with the thermal properties of a fluid and the limitations of the heater need to be considered. There are different types of thermal fluids including water, glycol, organic (derived from petroleum) and synthetic (produced from advanced chemical processes) offered under respective brands of their producers such as Eastman (Therminol®/Marlotherm®), Dow Chemical (Dowtherm™), ExxonMobil (Mobiltherm™), and others.

Key properties of heat transfer fluids include thermal stability, low viscosity, high flash and fire points, and low toxicity helping to ensure safe and reliable operation of heat transfer systems. Their selection depends on various factors, including the operating temperature range, heat transfer efficiency requirements, system design, and safety considerations.

Sourced from quality producers, thermal fluids are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines in different grades and packaging options including 210-Liter drums and 26-Liter pails. Based on different blends, AVIATIONEU NEW ERA heat transfer fluids can be used for heating and cooling processes in a variety of industrial applications resulting in economy, efficient operations, minimum maintenance, and precise temperature control.  Indicative industries of their application include: hydrocarbon processing (oil and gas, natural gas, refining, etc.), plastics processing, chemical processing, pharmaceuticals, food & beverage processing, renewable energies and many others. They exhibit similar characteristics, equivalent performance and consist cost effective alternatives to respective competitive brands. Depending on the selected product, they exhibit features and benefits outlined below:

Wide temperature operating ranges

Extended service life

Exceptional thermo-oxidative stability

Fast heat transfers

Excellent compatiblity

Low volatility

Cost savings

Appearing prices are per liter or kilogram depending on the product.

For additional information please refer to the Product Description section or contact us.

AEROSHELL® produces a range of mineral and synthetic hydrocarbon hydraulic fluids, lubricating fluids and preservatives supporting airraft systems' operation and longer preservation.  A non-exhaustive list of offered products is presented below. Additional information is available in the Product Description section. Due to the continuous expansion of our offered product portfolio some AEROSHELL® products may not be listed yet in our Web Platform but they may still be offered through our supply network. Please contact us for additional information or assistance.

AEROSHELL® Fluid 3, general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. 

AEROSHELL® Fluid 12, synthetic ester oil used for general aircraft lubrication as well as for aircraft gyro instrument gimbal bearings, separately lubricated high speed turbines and compressors, aircraft air cycle equipment and electronic equipment. Particularly suitable when an oil with a low evaporation rate is required at high and low temperatures. Approved to MIL-L-6085C.

AEROSHELL® Fluid 31, synthetic hydrocarbon based aircraft hydraulic fluid with greatly improved fire resistance characteristics when compared with conventional petroleum products. Approved to MIL-PRF-83282D.

AEROSHELL® Fluid 41, mineral oil based  "super clean" hydraulic oil manufactured to a very high level of cleanliness and possesses improved fluid properties. It is suitable for use with brake and hydraulic systems with synthetic rubber seals.

AEROSHELL® Mineral Fluid 5M-A, highly refined, medium viscosity mineral oil with an extreme pressure additive and additives for good oxidation and corrosion protection. No longer produced. Limited availability till stock exhaustion. A possible alternative could be NYCO Nycolube 3525 meeting the same specification MIL-PRF-6086F.

AEROSHELL® Fluid 61, synthetic hydrocarbon base hydraulic fluid specifically inhibited to provide excellent oxidation stability for the oil. Approved to MIL-PRF-46170 Type I.

AEROSHELL® Fluid 602, synthetic hydrocarbon coolant fluid for aircraft electronics. No longer produced. Limited availability till stock exhaustion. Consider CASTROL® BRAYCO™ 889 meeting same specification MIL-PRF-87252E .

AEROSHELL® Fluid 71, preservative mineral hydraulic fluid of improved cleanliness. It is composed of a mineral base oil with an additive package which results in a product with excellent corrosion preventative properties as well as excellent oxidation stability, and good anti-wear characteristics.

Most airplanes nowadays are painted in vibrant colors, with designs and logos that need to retain their "fresh" appearance till repaint despite their operation in  harsh weather and environmental conditions. The types of paint used on arcraft are enamel and epoxy. For more information about these 2 types of paints please refer to the Product Description section.

AKZONOBEL Aerospace Coatings is the global leader in the manufacture, development and supply of of high performance paints and coatings for civil and military aerospace applications. They are widely used in the OEM and MRO sectors of the commercial airline, general aviation and the military air markets. AKZONOBEL Aerospace Coatings product porfolio includes among others primers, polyurethane top coats, fillers, surfacers, abrasion resistant materials as well as composite, conductive, insulation & other coatings. AKZONOBEL solutions include also training, technical advice and coatings consultancy.

AKZONOBEL Aerospace ECLIPSE (ECL-G) range of Gloss Polyurethane Top Coats (aka topcoats)  are gloss, chemically cured, low VOC topcoats designed to provide distinctness of image (DOI). Their balanced formulation provides superior chemical resistance, stain resistance and flexibility. They are qualified/approved to an extensive list of specifications.

ECL-G-92 Top Coats meet Boeing BAC 701 and BMS10-60 Type I & II Class B Grade D performance specifications, ECL-G-2 Top Coats meet Boeing BMS 10-72 and  Bombardier - Canadair BAMS 565-002 specifications while ECL-G-7 Top Coats meet those of Boeing BMS 10-72 Type IX and Bombardier - Canadair BAMS 565-009.  

When used with AKZONOBEL primers 10P20-44, 10P20-44M or 10P20-44MNF (depending on OEM specification), the ECLIPSE topcoats provide a durable, long lasting, protective and decorative finish that exceeds typical OEM requirements for exterior aircraft performance. 

The ECLIPSE topcoats should be mixed with the AKZONOBEL Aerospace PC-233 Curing Solution and optional thinner separately sold. Please consult the supplied product Technical Data Sheet (TDS).

HAZARDOUS MATERIALS - UN1263, CL 3, III - Hazmat packaging & certification required. In addition, products in aerosol cans are generally prohibited to ship by air without Hazmat packaging & certification due to the possibility of aerosols combusting at high altitudes. 

For additional information, please refer to the supplied documentation or contact us.

TIODIZE Co., Inc. is an advanced technology company specializing in the development, manufacturing and application of composite products and advanced coatings. Their composite product range includes FIBER/LITE® fasteners and fastening devices maintaining high tensile, shear and fatigue strength at temperatures to 700°F and TRIBO/COMP® self-lubricating bearing materials with an unequaled wear life and a high strength to weight ratio.TIODIZE coating product portfolio includes corrosion & emissivity coatings, dry-film lubricants and anti-seize products as well as a range of Green, environmentally compliant non-hazardous cleaners and lubricants meeting EU REACH Regulation requirements for the sports, consumer and racing markets, such as their  ALUMAZITE® family of aluminum pigmented corrosion inhibiting coatings. 

TIODIZE® TIOLON® and TIOLUBE® families of products are advanced anti-friction, anti-wear, MIL-spec quality dry film lubricants for static and dynamic conditions. Their product lines include TIOLON® PTFE (Teflon®) and TIOLUBE®  MoS2 (Molidisulfide) organic and inorganic, low VOC and water based dry films suitable for different operating temperature applications.Their dry-film lubricants are utilized in almost any application that involves lubrication for friction and wear or  barriers for galling and corrosion in an increasingly broad spectrum of industries including aerospace, automotive, marine and electronics.

For more information on TIODIZE products please refer to the Product Description section and the supplied documentation.

TOTALENERGIES (formerly TOTAL) Specialties has developed a comprehensive turbine lubricant product range to support the power generation industry (whether it’s for large frame or aero-derivative turbines) with approvals by the leading turbine manufacturers. Offered in 20-liter containers and drums of 208 liters (210 kg) each.

TOTALENERGIES PRESLIA range of turbine oils include: 

a) PRESLIA mineral high-performance turbine lubricants for regulation and lubrication circuits of gas, steam and combined cycle turbines working at high temperatures. Can also be used in centrifugal and screw compressor bearing lubrication when an oil without strong anti-wear properties is needed. These oils offer long drain intervals, simplified maintenance and  ageing protection of engines and equipment in which they are used. 

b) PRESLIA GT (ISO 32 and 46) high-running temperature resistant turbine lubricants. These oils are specially designed for the lubrication (bearing, gear boxes) and regulation of gas turbines. The use of non-conventional base stocks and unique additization provides excellent thermal-oxidative stability. Preslia GT 32 and 46 should also be considered for use in steam turbine applications that requires either an ISO 32 or 46 fluid.

c) PRESLIA SE synthetic lubricants for aero-derivative turbines. Formulated with an advanced polyolester-basestock and next generation additive technology, Preslia SE Jet (5cSt POE) provides outstanding performance in the most demanding land-based aero-derivative engine applications that require a SAE AS5780 qualified fluid. PRESLIA SE HTS (High Thermal Stability) is a High Temperature/Performance oil delivering the performance expected for aeroderivative gas turbines operating in the most difficult environments.

For additional information please consult the Product Description section and the supplied documentation.

HENKEL BONDERITE® is the premier brand for surface technology and process solutions that create competitive advantages across the industrial manufacturing marketplace.  Trusted for reliability, sustainability & proven results, BONDERITE® processes deliver superior cost-in-use and operational efficiency through a broad portfolio of cleaner, surface treatment, coating & lubricant materials along with engineering services.

HENKEL BONDERITE® Forging Fluids are used in warm to hot forging processes to help increase productivity.  Product offerings include graphite, non-graphite and water-based products which perform well under extreme temperatures. An overview of these products is included in the Product Description section. For additional information please consult the supplied documentation.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates.

CHEMETALL® NAFTOSEAL® polysulphide sealants are specifically designed to meet the challenging  requirements of the aerospace industry for multi-purpose applications. The OEM and maintenance sectors both  benefit from a full range of easy-to-use and approved aircraft sealant technologies. The application characteristics of NAFTOSEAL® enable higher production rates. In addition NAFTOSEAL®  sealants offer  eco-friendly properties: all components are chromate-free, solvent-free or very low in solvent content. 

Key Features & Benefits:

 Free of chrome and solvents/low in solvent content

 Low temperature flexibility

 Fast tack-free and cure times for high production rates

 Good adhesion to various substrates

 Excellent chemical resistance

 High elasticity and resilience

 Good thixotropic properties, no slump

 Low and medium density products available

 Applications:

CHEMETALL® NAFTOSEAL® multi-purpose aircraft sealants can be used for all aircraft applications requiring sealants, such as fuel tank, fuselage, floor panels and aerodynamic smoothing. Adhesion promoters, tool and equipment cleaning technologies and mixing devices round-off our portfolio and cover all aspects for an efficient and safe sealant application.

Please refer to the supplied documentation for features and specifications of individual products.

Αutomatic lubrication systems  (aka lubricators) provide the appropriate lubrication quantity at the correct intervals, minimizing friction and wear and optimizing bearing and machinery service life. Automatic lubricators are installed on single lubrication points and automatically dispense the proper amount of lubricant to the application. Especially when lubrication points are difficult to access for safety reasons or their location in the plant, automatic lubricators can offer the solution.  Lincoln (part of SKF Group)  automatic lubrication systems and accessories' portfolio includes Centro-Matic®‚ Quicklub®‚ Modular Lube®‚ Helios®‚ Duo-Matic® and ORSCO® brands offering a solution for most lubrication points. Main benefits from the use of   Lincoln automatic lubricators include:

Increased worker safety for lubrication of difficult to access lubrication points,

Maintenance efficiency with automated lubricant supply,

Improved machine reliability with optimized lubricant supply,

Selection of lubricators type and lubricant for application needs from a wide product portfolio.

For additional information please consult the supplied documentation.

MINERAL WAX PLANT BELWAX range of lubricants includes products for special uses outlined below:

LITOL-24 grease designed for application in friction units of wheel and tracked (crawler-type) vehicles, industrial equipment and seaborne machinery of different purpose, at operating temperatures from -40 °С to +120 °С (for shorter time periods up to 130 °С).

GRAPHITE grease intended for greasing of hard heavily loaded mechanisms (open geared wheels, threaded connections of actuator screws, jacks, spring, etc.). The temperature range of application is from -20°С to +60°С. In springs and similar devices, the grease can be used at a temperature below -20°С.

CIATIM-201 frost resistant grease designed for greasing of low-loaded friction, rolling and sliding units at temperatures from - 60°C to + 90 °C. 

KS-UNM cable lubricant for the protection of cables under conditions of warehouse storage and air storage, as well as in the process of exploitation. The lubricant guarantees protection of cables against corrosion in a climate emulation chamber under adverse conditions, not less than 30 cycles. The lubricant is thermally stable, provides a possibility of its application at a centralized system of preheating of feed to a cable-twisting machine, as well as satisfactory work conditions for maintenance personnel. In the process of application, cable lubricant KS-UNM can be used as an anti-friction agent for lubrication of wiring of steel cables, used as main cables in vertical lifting and slopping installations of rotary machines, balancers, brake units, shock tools, mining tools, parachute systems, fenders, guiding units, suspension units and other excavation equipment. In its consistency the lubricant is moderately viscous, it is applied preheated at stranding, making of cores and cables at the corresponding manufacturing plants. 

NYCO HYDRAUNYCOIL® range of products includes mineral and synthetic fluids for hydraulic systems and circuits subjected to high and low temperatures, resistant to fire, extreme pressure and corrosion, and biodegradable. NYCO HYDRAUNYCOIL® fluids are shock-strut fluids. The main hydraulic fluids used in civil aviation are phosphate ester based fluids produced by Exxon-Mobil and Eastman Skydrol.

Different NYCO HYDRAUNYCOIL® hydraulic fluids are available addressing the requirements of specific sectors/applications:

FH & EL series for the Automotive & Industrial sectors,

FH 14 recoil and hydraulic system fluid

FH 19 recoil and hydraulic system fluid for Navy vessels

FH 51 hydraulic fluid used on all types of aircraft

FH 5 AW / 6 AW fluids dedicated to Boeing aircraft in operation, after overhaul and under storage. Also available for Airbus aircraft.

FH 42 synthetic shock strut fluid for new generation aircraft

FH 2 helicopter and fighter jet system fluid

Applications

Aeronautical: damping fluid for landing gears (initial assembly at the main OEMs), fluids for helicopters and combat aircraft, actuators, THS (Tail Horizontal Stabilizer), test bench, etc.

Military: mobile equipment, artillery, gun-mounts, tanks, missile hydraulics, etc.

Automotive: biodegradable hydraulics for public works, lifting and marine equipment, etc.

Industrial: dams, drill bits, etc.

For more information on NYCO HYDRAUNYCOIL® fluids please refer to the supplied documentation.

NYCO and ANDEROL® ROYCO® oils, greases, fluids and specialty products are used in aircraft of Russian and Ukrainian manufacturers meeting the corresponding specifications. Most of their products are included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.