MICHELIN® Aircraft Tyres is internationally recognized as the No.1 tire manufacturer in the world. The company provides bias tires, radial tires, and tubes for aviation customers around the world, in a range of applications including commercial and regional airlines, general aviation and military aviation. 

MICHELIN® AIR® X® Aviation Radial Tires are currently mounted on a wide range of commercial, military and corporate aircraft. Given the numerous advantages they offer over conventional bias-ply tires, these tires have elevated the basic performance expectations for aircraft tires, the same way MICHELIN® radials raised the standards for automobile tires. Offered in NEW or USED (RETREAD) (*) Condition. Compared to bias tires, MICHELIN® AIR® X® radials offer:

Measurable Fuel Savings

More Landings Per Tread

Improved Cut Resistance

Key features of MICHELIN® AIR® X® radials include:

Light Weight Radial Design. They typically weigh 20–30% less than comparable bias tires, and they operate at cooler temperatures. This leads to measurable fuel savings, more landings per tread, longer wear characteristics and a more stable contact patch than bias tires, as well as shorter turnaround times and reduced carcass fatigue.

Extra Strong Carcass. Michelin’s carcass design helps restrict tire growth and the stretching of rubber resulting in better cut resistance than bias tires.

Optimized Tread. Durable cut-resistant tread includes deep skid depth and specially-designed circumferential grooves. This contributes to an extended tire life, less heat build up and lower maintenance costs due to fewer tire changes.

Customized Rubber Compounds. Sidewall is optimized for both ozone and ultraviolet light protection which helps reduce ozone cracking in key areas of the tire. Provides maximum amount of exterior wear and crack resistance for a long tire life.

Flexible Casing. The casings of MICHELIN® AIR® X® radials is more flexible than casings used in bias tires. This results in noticeably smooth operating characteristics during taxiing, landing and takeoffs.

Please refer to the supplied documentation and the Reference & Application Chart for additional information.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

AIRFRAMES ALASKA designs and manufactures ALASKAN BUSHWHEEL (ABI) FAA/PMA approved wheels & brakes and tires (separately presented) made for flying and landing off-field in the most rugged backcountry conditions. 

ABI FAA/PMA approved wheels and brakes include assembly kits as direct replacements for respective Cleveland wheel & brake assemblies, wheel assemblies, brake assemblies, brake calipers and other replacement parts.

For more information on ABI wheels and brakes please refer to the Product Description section and the supplied documentation.

GOODYEAR® AVIATION tires are widely used in all aviation tire market segments, from piston engine light aircraft to turboprops, business jets, regional and commercial airlines.They come in different series meeting respective economy, performance or special operations' application requirements. Offered in NEW or USED (RETREAD) (*) Condition.

GOODYEAR® AVIATION FLIGHT SPECIAL® ΙΙ Series aircraft  tires are popular replacement tires for light aircraft due to their unsurpassed combination of value and performance. Designed for long tread life, they are built to last. They feature quality construction, wide rib thread design and large footprint, tough-wearing thread rubber and triple-tempered nylon casing cord resulting in enhanced traction, uniform wear and extended service life.

GOODYEAR® AVIATION FLIGHT CUSTOM® ΙΙI Series "Top of the Line" aircraft  tires set new records for long wear, high-strength and dependability. They feature dual polymer tread compound, enlarged tread contact area, extra-wide aquachannel grooves, sculptured sidewalls and Kevlar® belts for added tread stability. Benefis from their use include up to 20% more landings, superior wet traction treadwear and enhanced traction and treadwear assisting dimensional stability. 

GOODYEAR® AVIATION FLIGHT EAGLE® Series are industry’s preferred business jet tires. FLIGHT EAGLE® LT tires are designed for very light and light jet applications featuring tough, cool-running tread compound, robust, 6-ply bead area, 2-groove tread design, sidewall with antioxidants to help fight ozone and special wear-resistant tread compounds.

GOODYEAR® AVIATION FLIGHT LEADER® Series tires are the bias-ply choice for commercial aircraft. They feature a bias-ply construction, a specialized cord body shape and a specially compounded tread design and large contact area. They offer high speed performance and greater load capacity but also reduced stress as the tire cycles from tension to compression. They can be used in a wide range of operating conditions and aircraft applications.

For additional information please refer to the supplied documentation or contact us.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

Brakes and related parts for use on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

MICHELIN® Aircraft Tyres is internationally recognized as the No.1 tire manufacturer in the world. The company provides bias tires, radial tires, and tubes for aviation customers around the world, in a range of applications including commercial and regional airlines, general aviation and military aviation. 

Michelin® AIR® Aircraft Tires offer just the right balance of performance and durability required by demanding pilots. The sidewall compound is optimized to provide maximum ozone and ultraviolet light protection, while the MX2000 tread compound is Michelin’s toughest. In addition, the new Air Cushion Inner Liner provides a protective cushion over the casing plies which guards against inner tube chafing. And the “Posi-Fit” bead construction reduces movement between the tire and the wheel for improved lateral stability. Offered in NEW or USED (RETREAD) (*) Condition.

Michelin® AIR® Aircraft Tires are designed to provide:

- a very long tire life and lower maintenance costs due to fewer tire changes

- exceptional balance for smooth taxiing,even wear, and heat resistance

- maximum protection against sidewall cracking caused by ozone and UV light

- excellent lateral stability and impact absorption, even under rough landing conditions

Product Features:

Deep Tread Depth: Thick rubber in the tread area helps provide for a long tire life. Contributes to lower maintenance costs due to fewer tire changes.

Unique Bead Construction: Provides a firm (tight) fit to help reduce movement between the tire and wheel. Helps improve lateral stability for a long tire life, even under rough landing conditions

Optimized Casing Design: Proprietary Michelin production processes help balance stresses within the tire structure. Strong, yet lightweight nylon cords are designed to exceed strict industry standards for overpressure strength. Results in an effi cient, lightweight product with excellent balance properties for smooth taxiing, even wear, and resistance to heat buildup for a long tire life.

Customized Rubber Compounds: Sidewall is optimized for both ozone and ultraviolet light protection which helps reduce ozone cracking in key areas of the tire. Provides our maximum amount of exterior wear and crack resistance for a long tire life.

Contoured Shoulder Design: Helps absorb lateral impacts associated with landing. Designed to help the tire achieve a full life, even under adverse conditions.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

MICHELIN® Aircraft Tyres is internationally recognized as the No.1 tire manufacturer in the world. The company provides bias tires, radial tires, and tubes for aviation customers around the world, in a range of applications including commercial and regional airlines, general aviation and military aviation. 

MICHELIN® AIRSTOP® Aircraft Tire Inner Tubes provide long-lasting, dependable performance you can rely on in just about any operating condition. Made from exclusive Michelin butyl compound they offer  extended air retention and can sustain temperatures as low as -50°C.  In addition, they are formed without a circumferential splice, resulting in fewer joints and a more uniform tubewall thickness after inflation for optimized reliability at a minimal weight.  AIRSTOP tubes are manufactured to exacting balance tolerances (without correction), which meet or exceed all industry standards. This eliminates the need to further balance the wheel assembly in order to compensate for balance irregularities in the tube. Tube lubricant is factory applied to the tube exterior for easier installation and to help minimize foldover after installation and inflation. Comply with Aerospace Standard AS50141. Available in different sizes. Please also refer to the attached documentation.

Product Features:

Advanced Butyl Material

Exclusive Michelin® butyl compound offers excellent resistance to diffusion for extended air retention and dependable performance. Michelin® AIRSTOP® tubes help provide the same high quality seal found in Michelin® AIR X® radial tires.

Circular Extrusion Manufacturing Process

A Michelin® exclusive, Michelin® AIRSTOP® tubes are formed without a circumferential splice, resulting in fewer joints and a more uniform tubewall thickness after inflation. This helps provide optimized reliability at a minimal weight.

Built-In Balance

All Michelin® AIRSTOP® tubes are manufactured to exacting balance tolerances (without correction), which meet or exceed all industry standards. This eliminates the need to further balance the wheel assembly in order to compensate for balance irregularities in the tube.

Easy Installation

Tube lubricant is factory applied to the tube exterior for easier installation and to help minimize foldover after installation and inflation. In addition, molded vent ridges help channel trapped air back to the valve stem for easy release.

Low Temperature Performance

Michelin® AIRSTOP® tubes are designed to perform in the extreme low operating temperature of minus 50o C, so you can confidently fly in cold weather with consistent, reliable performance.

High Quality Complies with Aerospace Standard AS50141.

TOST Flugzeuggerätebau designs and manufactures top quality products including aircraft wheels, brakes, tires, tubes, glider towing and launching equipment and tow releases serving the needs of aviation sports and industry. TOST and TOST AERO brands for tires are synonyms for safety in aviation.. TOST wheels are used worldwide in gliders, motor gliders, aircraft, ultralight, amphibium aircraft, helicopters and gyrocopters but also in heavy-duty applications.

TOST Landing Wheels (LR) are designed for use in aircraft as nose wheel, tail wheel, support wheel or as unbraked main wheel and they are offered in different series and various dimensions and constructions. TOST Disk Brake Wheels (SB) are presented separately.

Mini 150 & 180 Series, fitting tire diameters 150 mm and 180 mm respectively, are the smallest available wheels with pneumatic or foam-filled tires providing good suspension and absorption properties. 

Moritz Series 3″ Tail Wheels are available in two versions: Moritz, a sturdy aluminium die-cast wheel hub with fins sector and Moritz II, a two-part wheel hub CNC milled from aluminium. 

Max Series 3.5″ Tail Wheels fit tire size 200 x 50, widely used for tail wheels of gliders and motor gliders.

Classic Series 4″ Landing Wheels can be used as sturdy nose wheels and main wheels or for special purposes.

Tria 4″ Landing Wheels are convenient for applications, in which a low weight combined with a high strength are required.

Classic Series 5″ Landing Wheels are used as aircraft nose wheels and other heavy duty applications. 

Penta 5″ Landing Wheels can be used to save weight as well as a possible replacement for landing wheels equipped with inch bearings. 

The 5″ Tubeless Landing Wheels can be used  to realisze a further weight reduction.  The weight decrease is about 15% in total weight compared to a wheel hub with tire and tube (tubetype TT).

Mike Series 6″ Landing Wheels from aluminium diecast with deformable fins sector are particularly suitable for high loads.

Penta Series 6″ Landing Wheels can save weight compared to the Landing wheel (LR) of the 6″ Classic series.

Classic Series 10″ Landing Wheels can be used in the range of high-tensile special applications.

Matching TOST AERO tires and tubes are offered for all TOST Landing Wheels. Please consult the tables with information on available tires and tubes for the different series.

For additional information please refer to the Product Description section and the supplied documentation.

DUNLOP AIRCRAFT TYRES manufactures several different types of aircraft tIre for many applications: bias tIres for modern jet and military aircraft, radial tires for military jets, bias tires for helicopters and chined tyres used for nose wheel applications primarily on rear-engined jet aircraft   Different tire size designations grouped into various 'types' are also used such as Type III mainly for low-pressure service on older piston-driven aircraft or Type VII related to high-pressure tires with high load capacity designed for modern jet and turboprop aircraft. All DUNLOP aircraft tires are manufactured in accordance with TSO-C62, MIL-PERF-5041 or AIR8505A and/or applicable airframe manufacturer specifications.

DUNLOP aircraft tires are offered as NEW or RETREAD ( the second designated by the letters "RT" after the product reference number (SKU).

DUNLOP does not mandate a maximum shelf life for its tires, so long as the storage conditions are met. The company recommends that tires be kept in a store for no more than 12 years from their date of manufacture, if they are to stay serviceable.

DUNLOP aircraft tires have a warranty of 12 months from the date of their delivery. The company undertakes at its option to repair or replace them or refund the customer for any of the tires which are defective by reason of defective material, design or workmanship.

DUNLOP AIRCRAFT TYRES also produces aircraft inner tubes manufactured to rigorous standards which meet or exceed all commercial and military performance requirements, including MIL-I-5014 military specification (except for packaging).

They are made from natural rubber which ensures maximum life and meets cold temperature performance requirements.

DUNLOP inner tubes are factory balanced. The heavy spot is marked in red. If there is no red mark, the valve is considered the heavy spot. The valve stem, core and cap are manufactured for aircraft use and designed for high and low pressure requirements.

For additional information on DUNLOP AIRCRAFT TYRES  products please consult the supplied Guide and tire specification sheets.

AIRFRAMES ALASKA designs and manufactures ALASKAN BUSHWHEEL (ABI) wheels & brakes and tires made for flying and landing off-field in the most rugged backcountry conditions. ABI tires absorb the energy of rough landings, taking the brunt of the impact off the pilots, wheels, gear, and airframe. Unlike your standard aircraft tires, Bushwheels are tubeless. This distinctive design eliminates the problem of tire slippage and stem shearing and makes it possible to run these tires at very low PSI. Different models are offered to suit needs of aircraft operating conditions. ABI tires are FAA TSO C62d approved. Models are available in the following versions and fit standard 6" wheels unless otherwise mentioned:

Standard thread: 3/16"

Heavy thread: 1/4". Heavy tread 26" ABI tires are constructed with a thicker tread layer. Suitable for pilots operating their aircraft on pavement between backcountry flights.

The 26" ABI tires are designed and handcrafted for use on lighter aircraft such as Cessna 182 & Cessna 206. They're also the ideal "entry level" bush tires for pilots upgrading from standard tube type aviation tires for the first time.

A step up in terms of size, 29" ABI tires have a slighter profile and create less drag than larger Bushwheels. This places these bush tires in size/weight sweet spot for heavier aircraft like Cessna and Maule while still providing the footprint and energy absorption critical in bush landings. 

The 31" ABI tires are handcrafted featuring an impressive ratio of weight to size. Their solid footprint makes these bush tires the de facto standard for bush pilots.

The 35" ABI tires are designed for the most rugged off-airport operations. They require ABI 10650 10" wheels.

The 35" Beaver ABI tires stand up to the heavier load of de Havilland Beaver and Pilatus aircraft with a gross weight up to 5600 lbs (2800 static load rating per tire).

BERINGER AERO manufactures a range of wheels, brakes and related parts for use on certfied and non-certified aircraft (LSAs, experimentals and gliders). Their product portfolio includes among others wheels,Certified (STC) and Non Certified wheel/brake assemblies, wheel and brake parts and related tools.

Wheel and brake parts are included in this presentation while wheels and wheel/brake assemblies and tire options are separately presented.

For more information please refer to the Product Description section and the supplied documentation or contact us.

Aluminum valve as used in production aircraft with Model A-110 master cylinders for dual brake installations. Complete with AN flare fittings.

A grease seal, often called an oil or dirt seal, is a type of seal utilized to retain grease in a case or housing. Grease seals close spaces between stationary and moving components in mechanical equipment, helping prevent lubricant escape. Preventing harmful containments from entering machinery is another critical function of a grease seal. Oil and grease seals are available in numerous lip materials. Popular materials include felt, leather, urethane, nitrile, polyacrylate, ethylene-acrylic or polyacrylic, silicone, fluoro-elastomer, tetrafluoro-ethylene propylene and PTFE. Cleveland Grease Seals are intended for use in Cleveland Wheel Assemblies. 

The company SPECIALITY TIRES OF AMERICA (formerly McCREARY TIRE & RUBBER providing automotive tires) manufactures a wide range of aircraft tires under different brands including SUPER HAWK®, AIR HAWK®, AIR TRAC®, AERO CLASSIC® & AERO TRAINER® as well as matching tire tubes. Different brands (series) briefly presented below are separately listed. For more information please refer to the supplied documentation.

SUPER HAWK® tires are the best choice when  the highest levels of performance and extra-long tread life are required. Designed to handle higher landing speeds and heavier loads, these tires combine advanced design & over 90 years of precision tire craftsmanship resulting in premium belted aircraft tires that surpasse FAA specifications and match the performance of more expensive brands.

AIR HAWK® tires are premium grade & priced tires, but provide longer service life. Excellent choice for a wide range of applications. Improved tread compounds and high-strength casings offer added wear resistance and an extra measure of security. AIR HAWK® tires are FAA approved and tested by thousands of pilots, delivering a reliable, cost-effective performance under a wide variety of takeoff and landing conditions. 

AIR TRAC® fine nylon cord narrow-ribbed, oval shaped tires are designed for soft field applications and rigidly tested to meet FAA Standard TSO-C62. The  AIR TRAC  tires consist an excellent choice for single engine, piston aircraft. Thesy are ideal for aircraft operated on grass strips while being perfectly usable on hard surfaces. These tires are are original equipment on many of today’s aircraft and offer a great performance in an economical tire. AIR TRAC® tubes are the perfect match to the AIR TRAC®  tires. 

AERO CLASSIC® tires are designed specially for classic planes including warbirds, DC-3's, and Beech 18's, often the only manufacturer producing tires for these aircraft. The product line includes over 50 tires and tubes, from 8" diameter for tailwheels, up to 56" diameter C-130 inner tubes. AERO CLASSIC® tubes are tested to MIL-I-5014F standard. 

AERO TRAINER® tires are designed for flight schools with single engine trainers. They combine the high quality and durability with a competitive price.

SPECIALITY TIRES products are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed (depending on the ordered item) please mention this during the order placement. In this case, additional cost may apply.

Wheels, used in conjunction with tires, provide support for the tires and weight of the aircraft. Combined with brakes, they assist in directional and stopping control during aircraft ground maneuvers, taxi, takeoff, and landing. Brake assemblies and disc combinations are designed to properly and safely decelerate the aircraft under various conditions. Brake assemblies consist of one or more pistons depending upon the aircraft requirements.
CLEVELAND Aircraft Wheel & Brake Division, a PARKER HANNIFIN business unit, designs and manufactures wheels, brakes & assemblies for worldwide aircraft markets. CLEVELAND brand wheels and brakes are used on more than 80 percent of general aviation aircraft while their wheel assemblies are offered for military and business aviation applications. Their product lines include both TSO'd aircraft wheels, brakes, and wheel and brake assemblies for nose and main wheels to meet a variety of aircraft specifications and brake assembly interfaces. Offered through their worldwide distributor network for quick parts availability. Main and nose wheels are made from either aluminum castings, magnesium castings, or aluminum forgings. The main wheels are of the divided type, incorporating inner wheel half and outer wheel half, plus a disc, which are fastened together with tie bolts, washers, and nuts. They are offered in different models to work with different tire sizes. For example, their main wheel assemblies are designed for 6.00-6 tube tires while their #40-87 nose wheel assemblies are designed for 5.00-5 tube tires. Both are intended for use in general and business aviation, turboprop passenger, and helicopter applications. Sold in single pieces or in pairs whenever specified. Their key features include:
• Low maintenance for tubeless or tube-type
• Tapered roller bearings for dimensional stability and long life
• Molded grease seals for superior bearing bore sealing properties
• Split-rim design to allow ease of tire mounting
• High-strength through-bolts
• Sand castings and forgings
Nose wheel assemblies are made of magnesium or aluminum. Their key features include:
Load Capacity: Static load from 500 to 8600 lbs
Bearing Type: Tapered roller bearings
Size: 4 to 16 inch bead seat diameter
Torque Rating: Nut torque rating 90 to 150 in-lb dry; from 105 to 300 lube torque lb-inch
Weight: 3 to 18 lbs
For more information on the parts and quantities per assembly please refer to the respective illustrative parts list or contact us.
FAA 8130-3 Release Certification is available at additional cost. Please specify at the time of ordering.
Appearing prices are for units in NEW Condition. For units in USED Condition (mostly SERVICEABLE/OVERHAULED with proper certification) please contact us for availability and quotation.
Note: NCNR products: non-cancellable/non-returnable once the order is placed. Often require backordering to the manufacturer with significant lead times.

MITAS is the tyre brand for a range of applications for aviation, agricultural machines, construction vehicles, material handling equipment, motorcycles, and other specialty market segments. MITAS tyres (or tires) are distributed worldwide using global sale network TRELLEBORG WHEEL SYSTEMS which has been acquired by the YOKOHAMA RUBBER Co., Ltd. (Yokohama TWS). MITAS aircraft tyres are suitable for civil and military aircraft meeting tyre application requirements for ultra light, sport, light and turboprop aircraft as well as military light jets and military trainers. MITAS aircraft tyres are offered in 3 tread patterns: grooved guiding tread pattern (marked R – ribbed) which ensures stability of the aircraft and adhesion on a wet surface, TC (twin contact) designed for steerable front wheels and MX (mixed), a combination of both previous types. MITAS aircraft tyres are designed for use as  used as OEM parts by different aircraft manufacturers or replacements to the respective tires of other brands.All new tires for commercial aviation are certified in accordance with the rules of the European Aviation Safety Agency (EASA).

For additional information please refer to  the supplied documentation or contact us.

MATCO mfg's PVPV series parking brake valves have been designed for installation in a wide variety of homebuilt aircraft applications due to their light weight and easy in-line installation . In-line installation can be used in conjunction with either a single or dual parking brake system set- up with the respective use of valves  PVPV-S or PVPV-D available in single or double sided configuration.

GROVE Wheels and Brakes are precision engineered and manufactured to provide the highest quality and performance in the aircraft industry. GROVE wheels are manufactured in both aluminum and magnesium.  Aluminum wheels are more corrosion resistant than magnesium, are less expensive, but weigh more.  Both have the same strength and performance ratings. They are offered in sets (kits) in different sizes to comply with tire and axle sizes and static load ratings to match  the static aircraft gross weight on each wheel. GROVE brakes are offered for different braking torques, a function of the hydraulic system pressure and total caliper piston area, and with different kinetic energy capabilities. Aircraft with oversized tires or with a larger than normal engine should consider brake calipers with more or larger pistons. Different brake discs offered absorb the heat energy developed during braking.

Please refer to the Product Description section and the supplied documentation for additional information.

TOST Flugzeuggerätebau designs and manufactures top quality products including aircraft wheels, brakes, tires, tubes, glider towing and launching equipment and tow releases serving the needs of aviation sports and industry. TOST and TOST AERO brands for tires are synonyms for safety in aviation. 

For more than 30 years TOST has manufactured aircraft tires from 3" to 10" exclusively under the TOST AERO brand with a long lifetime, robustness and capability for high loads and speeds. TOST AERO tires and tires from other brands can be used with TOST wheels designed to cover a wide range of applications in gliders, motor gliders, aircraft, ultralight, amphibium aircraft, helicopters and gyrocopters but also in heavy-duty applications. Matching tire tubes with different valves and valve extensions are also offered by TOST to cover application requirements.

For additional information please refer to the supplied documentation.

Aircraft braking systems serve a vital function during takeoff, landing and taxiing. Along with landing gear, aircraft wheels and brakes are critical to ensure safe and reliable aircraft ground operations under extreme forces, stress, as well as wear and tear from general operation and the environment. Commercial aircraft brakes are arranged in multiple disk pairs commonly referred to as Heat Sinks or Heat Packs (as they convert the kinetic energy of the moving airplane to heat energy). Initially made metal (steel) heat sinks are gradually replaced by those from carbon fibres (particularly on larger, long-haul commercial airplanes) due to their higher efficiency in braking applications, longer life-span, lower weight and resulting less fuel consumption and lower CO2 emission by the engines. 

Carbon and steel heat packs and parts are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. Sourced from quality suppliers these heat packs  feature high quality, safety, improved design, significant cost savings and fast deliveries. They can be used as  cost effective alternatives in many commercial aircraft platforms equalling or exceeding standards of  respective OEM products by leading manufacturers such as Honeywell Aerospace, Collins Aerospace/Goodrich Wheels & Brakes, Parker Meggitt Aircraft Braking Systems and Safran Landing Systems (formerly Messier-Bugatti-Dowty). They are  PMA approved (*) parts by the Civil Aviation Administration of China (CAAC) for use on an extensive list of Western and Eastern commercial (civil ) aircraft platforms including Boeing, Airbus, McDonnell Douglas, Ilyushin and others and are currently installed in aircraft operating by different air transport operators in China and other countries in the Middle-East, South and Central Asia and Africa.

Typical Aircraft Applications for steel and carbon heat packs include Boeing 737 / 757, Airbus A318 / A319 / A320 / A330 , McDonnell Douglas: MD82 /MD90  Xian MA60 etc. 

(*)  Parts Manufacturer Approval (PMA) is a combined design and production approval granted by a competent Civil Aviation Authority (CAA) to a manufacturer of aircraft parts for modification and replacement. Use of Civil Aviation Administration of China (CAAC) approved parts in other countries depends on existing bilateral agreements between CAAC and respective competent authorities in these countries.

For additional information please contact us.

STOMIL-POZNAŃ S.A. is a tire manufacturer producing All-Terrain (AT) tires designed to perform on- and off-road, providing traction and comfort in different surface conditions. STOMIL tires are used in aviation as well other sectors such as the mining industry. STOMIL tires are installed in most Polish gliders and aircraft including; Jantar, Puchaz, PW–5, etc. They are offered in different versions (Wersja) and sizes with  350x135, 200x80 and 255x110 being the most popular ones. Different STOMIL tubes are also offered for use with the company tires.

For additional information please refer to  the supplied documentation.