MICHELIN® Aircraft Tyres is internationally recognized as the No.1 tire manufacturer in the world. The company provides bias tires, radial tires, and tubes for aviation customers around the world, in a range of applications including commercial and regional airlines, general aviation and military aviation. 

MICHELIN® AIR® X® Aviation Radial Tires are currently mounted on a wide range of commercial, military and corporate aircraft. Given the numerous advantages they offer over conventional bias-ply tires, these tires have elevated the basic performance expectations for aircraft tires, the same way MICHELIN® radials raised the standards for automobile tires. Offered in NEW or USED (RETREAD) (*) Condition. Compared to bias tires, MICHELIN® AIR® X® radials offer:

Measurable Fuel Savings

More Landings Per Tread

Improved Cut Resistance

Key features of MICHELIN® AIR® X® radials include:

Light Weight Radial Design. They typically weigh 20–30% less than comparable bias tires, and they operate at cooler temperatures. This leads to measurable fuel savings, more landings per tread, longer wear characteristics and a more stable contact patch than bias tires, as well as shorter turnaround times and reduced carcass fatigue.

Extra Strong Carcass. Michelin’s carcass design helps restrict tire growth and the stretching of rubber resulting in better cut resistance than bias tires.

Optimized Tread. Durable cut-resistant tread includes deep skid depth and specially-designed circumferential grooves. This contributes to an extended tire life, less heat build up and lower maintenance costs due to fewer tire changes.

Customized Rubber Compounds. Sidewall is optimized for both ozone and ultraviolet light protection which helps reduce ozone cracking in key areas of the tire. Provides maximum amount of exterior wear and crack resistance for a long tire life.

Flexible Casing. The casings of MICHELIN® AIR® X® radials is more flexible than casings used in bias tires. This results in noticeably smooth operating characteristics during taxiing, landing and takeoffs.

Please refer to the supplied documentation and the Reference & Application Chart for additional information.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

BRIDGESTONE® CORPORATION is the world's largest manufacturer of tires and other rubber products, delivering a wide range of innovative, premium product portfolio whch includes passanger and light truck tires, motorcycle tires, commercial truck and bus tires, aircraft and mining tires. The company also manufactures industrial rubber and chemical products, sporting goods, and other diversified products. Tires account for 80 percent of Bridgestone Group sales worldwide with sales of tires and other products in more than 150 nations.

BRIDGESTONE® has more than 80 years of experience and insistence on quality in aircraft tire manufacturing. The company supplies new and retread (*) tires to airlines and wheelshops worlwide remaining one of the most trusted brands in the aviation industry.

BRIDGESTONE® range of aircraft tires includes Bias, Radial and Revolutionarily Reinforced Radial Tires (RRR). They work under extremely severe conditions, carrying the weight of an aircraft up to 569 metric tons while accelerating up to 245 mph at takeoff, in addition to enduring varied environmental stress when in flight and taxiing.

The company manufactures its new aircraft tires in Japan while it operates aircraft tire retreading plants in Japan, the United States, Belgium and Hong Kong. Bridgestone provides airlines with seamless, global support for all of their product and maintenance needs in tires. 

BRIDGESTONE® Bias tires feature enhanced tire durability, greater overload durability, reduced weight, new cord and performance improvements due to the integration of Tension Control Optimization (TCOT) and Aircraft Tire Tension Control Optimization (ACOT) Theory principles.

BRIDGESTONE® Radial tires feature lighter design, reduced rolling resistance, rigged belt design, added strength to belt and carcass plies and increased number of landings.

BRIDGESTONE® Revolutionarily Reinforced Radial Tires (RRR) feature superior safety, higher cut resistance, more casing durability after received Foreign Object Damage (F.O.D.), economy, less weight and more landing cycles (improved tire wear). They have been selected by Airbus and Boeing as OE tires for their respective aircraft.

Please refer to the supplied documentation and the Aircraft Tire Application Table for additional information.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

5 inch wheel with 4.3 inch width with an additional 1.39 inch caliper spacing. 

TOST Flugzeuggerätebau designs and manufactures top quality products including aircraft wheels, brakes, tires, tubes, glider towing and launching equipment and tow releases serving the needs of aviation sports and industry. TOST and TOST AERO brands for tires are synonyms for safety in aviation.. TOST wheels are used worldwide in gliders, motor gliders, aircraft, ultralight, amphibium aircraft, helicopters and gyrocopters but also in heavy-duty applications.

TOST Landing Wheels (LR) are designed for use in aircraft as nose wheel, tail wheel, support wheel or as unbraked main wheel and they are offered in different series and various dimensions and constructions. TOST Disk Brake Wheels (SB) are presented separately.

Mini 150 & 180 Series, fitting tire diameters 150 mm and 180 mm respectively, are the smallest available wheels with pneumatic or foam-filled tires providing good suspension and absorption properties. 

Moritz Series 3″ Tail Wheels are available in two versions: Moritz, a sturdy aluminium die-cast wheel hub with fins sector and Moritz II, a two-part wheel hub CNC milled from aluminium. 

Max Series 3.5″ Tail Wheels fit tire size 200 x 50, widely used for tail wheels of gliders and motor gliders.

Classic Series 4″ Landing Wheels can be used as sturdy nose wheels and main wheels or for special purposes.

Tria 4″ Landing Wheels are convenient for applications, in which a low weight combined with a high strength are required.

Classic Series 5″ Landing Wheels are used as aircraft nose wheels and other heavy duty applications. 

Penta 5″ Landing Wheels can be used to save weight as well as a possible replacement for landing wheels equipped with inch bearings. 

The 5″ Tubeless Landing Wheels can be used  to realisze a further weight reduction.  The weight decrease is about 15% in total weight compared to a wheel hub with tire and tube (tubetype TT).

Mike Series 6″ Landing Wheels from aluminium diecast with deformable fins sector are particularly suitable for high loads.

Penta Series 6″ Landing Wheels can save weight compared to the Landing wheel (LR) of the 6″ Classic series.

Classic Series 10″ Landing Wheels can be used in the range of high-tensile special applications.

Matching TOST AERO tires and tubes are offered for all TOST Landing Wheels. Please consult the tables with information on available tires and tubes for the different series.

For additional information please refer to the Product Description section and the supplied documentation.

The company SPECIALTY TIRES OF AMERICA (formerly McCREARY TIRE & RUBBER providing automotive tires) manufactures a wide range of aircraft tires under different brands including SUPER HAWK®, AIR HAWK®, AIR TRAC®, AERO CLASSIC® & AERO TRAINER® as well as matching tire tubes. Different brands (series) briefly presented below are separately listed. They are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed and is available please mention during the order placement. In this case, additional cost may apply.

Inner tubes are also offered for tube type tires which generally share the same designation as the respective tire (e.g. a 5.00-5 inner tube fits a 5.00-5 tire) with exceptions when the inner tube can fit more than one aircraft tyre size (e.g. the 5.00-5 inner tube can be used in both the 5.00-5 as well as the 15×6.00-5 tires). Inner tubes are supplied with valves of different designs (e.g. straight or 90º bend valves) carrying respective designations. Accessories such as French Chalk, Valve Caps, and Cores are also available on request. For more information please refer to the supplied documentation.

SUPER HAWK® tires are the best choice when  the highest levels of performance and extra-long tread life are required. Designed to handle higher landing speeds and heavier loads, these tires combine advanced design & over 90 years of precision tire craftsmanship resulting in premium belted aircraft tires that surpasse FAA specifications and match the performance of more expensive brands.

AIR HAWK® tires are premium grade & priced tires, but provide longer service life. Excellent choice for a wide range of applications. Improved tread compounds and high-strength casings offer added wear resistance and an extra measure of security. AIR HAWK® tires are FAA approved and tested by thousands of pilots, delivering a reliable, cost-effective performance under a wide variety of takeoff and landing conditions. 

AIR TRAC® fine nylon cord narrow-ribbed, oval shaped tires are designed for soft field applications and rigidly tested to meet FAA Standard TSO-C62. The  AIR TRAC  tires consist an excellent choice for single engine, piston aircraft. Thesy are ideal for aircraft operated on grass strips while being perfectly usable on hard surfaces. These tires are are original equipment on many of today’s aircraft and offer a great performance in an economical tire. AIR TRAC® tubes are the perfect match to the AIR TRAC®  tires. 

AERO CLASSIC® tires are designed specially for classic planes including warbirds, DC-3's, and Beech 18's, often the only manufacturer producing tires for these aircraft. The product line includes over 50 tires and tubes, from 8" diameter for tailwheels, up to 56" diameter C-130 inner tubes. AERO CLASSIC® tubes are tested to MIL-I-5014F standard. 

AERO TRAINER® tires are designed for flight schools with single engine trainers. They combine the high quality and durability with a competitive price.

AIRFRAMES ALASKA designs and manufactures ALASKAN BUSHWHEEL (ABI) FAA/PMA approved wheels & brakes and tires (separately presented) made for flying and landing off-field in the most rugged backcountry conditions. 

ABI FAA/PMA approved wheels and brakes include assembly kits as direct replacements for respective Cleveland wheel & brake assemblies, wheel assemblies, brake assemblies, brake calipers and other replacement parts.

For more information on ABI wheels and brakes please refer to the Product Description section and the supplied documentation.

GROVE manufactures axles and hardware for use in GROVE wheels as well as those of other manufacturers.

GROVE 500x5 wheel axles (P/N. 5013 standard and P/N. 5018 with wheel pant stub) are produced from solid 2024-T3 aluminum with anodized finish. They have a 1-15/16" Bolt Circle hole pattern and 1/4" diameter holes.

500x5 1-1/4" diameter standard axle (P/N. 5013) is the most popular axle for 500x5 wheels. It is designed to fit Grove 50-1, 51-1, 56-1, 57-1, 57-5 and Cleveland 500x5 wheels. Axle Weight: 0.92 lbs. Static Load Rating 1,250 lbs.

500x5 1-1/4" diameter axle (P/N. 5018) has built-in wheel pant stub with 1/4-28 thread. It is designed for use with Grove 50-1, 51-1, 56-1, 57-1, 57-5 and Cleveland 500x5 wheels. Axle Weight: 0.95 lbs. Static Load Rating 1,250 lbs.

Both axles require two spacers per axle (P/N. 5710) sold separately.  I.D: 1-1/4", O.D. 1-3/4", Thickness: 1/4". They can be used with 500x5 axles.

Standard axle nuts and axle bolt kits sold separately are also offered as part of GROVE product portfolio. Castle type nuts are manufactured to MIL Specification MS21025 using 4140 steel. Mild steel nuts are not acceptable for use on certificated aircraft. 1-1/4" dia. nuts for 500 x 5 axles, 1-1/2" dia. nuts for 600 x 6 axles.

MITAS is the tyre brand for a range of applications for aviation, agricultural machines, construction vehicles, material handling equipment, motorcycles, and other specialty market segments. MITAS tyres (or tires) are distributed worldwide using global sale network TRELLEBORG WHEEL SYSTEMS which has been acquired by the YOKOHAMA RUBBER Co., Ltd. (Yokohama TWS). MITAS aircraft tyres are suitable for civil and military aircraft meeting tyre application requirements for ultra light, sport, light and turboprop aircraft as well as military light jets and military trainers. MITAS aircraft tyres are offered in 3 tread patterns: grooved guiding tread pattern (marked R – ribbed) which ensures stability of the aircraft and adhesion on a wet surface, TC (twin contact) designed for steerable front wheels and MX (mixed), a combination of both previous types. MITAS aircraft tyres are designed for use as  used as OEM parts by different aircraft manufacturers or replacements to the respective tires of other brands.All new tires for commercial aviation are certified in accordance with the rules of the European Aviation Safety Agency (EASA).

For additional information please refer to  the supplied documentation or contact us.

GOODYEAR® AVIATION FLIGHT MATE (Butyl) tire tubes offer superior air retention in a wide range of temperatures, and dramatically reduce time spent maintaining proper tire pressure. They are made from natural rubber offering long life and meeting cold temperature performance requirements: extreme low temperature of minus 50 degrees C. These tubes  feature continuous extruded construction for uniformity, premium aircraft valves and an average weight of 3 lbs.

The benefits from their use include  excellent resistance to inflation loss due to the proprietary Butyl compound as well as better balance (no overlapped splice).

The GOODYEAR® AVIATION FLIGHT MATE butyl tubes are the perfect complement for Goodyear and other brand name aircraft tires. They comply with the requirements of SAE Aerospace Standard AS50141 and meet MIL-I-5014 military specification (except for packaging). 

The letter "B" indicates a BENT valve stem. The letter "S" indicates a STRAIGHT valve stem. The digits inside the parenthesis indicate the use with different tires as follows:

(1) For use in both 5.00-5 and G380x150-5 (15x6.00-5) tires.

(2) For use in both 6.00-6 and 15x6.00-6 tires

(3) For use in both 7.00-6 and 8.00-6 tires.

(4) For use in 6.50-8, 19.5x6. 75-8 & 22x8.00-8 tires.

(5) Discontinued

Aircraft wheels and braking systems serve a vital function during takeoff, landing and taxiing. Along with landing gear, aircraft wheels and brakes are critical to ensure safe and reliable aircraft ground operations under extreme forces, stress, as well as wear and tear from general operation and the environment. 

Aircraft brakes are arranged in multiple disk pairs, which are commonly referred to as brake Heat Sink. As aircraft brakes convert the kinetic energy of the moving airplane to heat energy, they are also referred to as Heat Packs made of steel or carbon fibres. Conventional metal (steel) brakes are gradually replaced by carbon brakes (particularly on larger, long-haul commercial airplanes) due to their higher efficiency in braking applications, lower weight and resulting less fuel consumption and lower CO2 emission by the engines. 

Commercial aircraft wheels and braking systems are produced by by leading manufacturers such as Honeywell Aerospace, Collins Aerospace/Goodrich Wheels & Brakes, Parker Meggitt Aircraft Braking Systems and Safran Landing Systems (formerly Messier-Bugatti-Dowty) and offered as OEM products/parts for an extensive list of commercial aircraft platforms.  For more information on different OEM products please refer to the Product Description section, the supplied documentation or contact us.

Carbon and steel heat packs are also offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They are  PMA approved (*) parts by the Civil Aviation Administration of China (CAAC) for use on an extensive list of Western and Eastern commercial (civil ) aircraft platforms including Boeing, Airbus, McDonnell Douglas, Ilyushin and others. Sourced from quality suppliers they are available in an extensive product range, consist cost effective alternatives equalling or exceeding standards of the respective OEM products and feature high quality, safety, improved design, significant cost savings and fast deliveries. For more information on AVIATIONEU NEW ERA PMA brake heat packs please consult our separate product presentation or contact us.

GROVE Wheels and Brakes are precision engineered and manufactured to provide the highest quality and performance in the aircraft industry. GROVE wheels are manufactured in both aluminum and magnesium.  Aluminum wheels are more corrosion resistant than magnesium, are less expensive, but weigh more.  Both have the same strength and performance ratings. They are offered in sets (kits) in different sizes to comply with tire and axle sizes and static load ratings to match  the static aircraft gross weight on each wheel. GROVE brakes are offered for different braking torques, a function of the hydraulic system pressure and total caliper piston area, and with different kinetic energy capabilities. Aircraft with oversized tires or with a larger than normal engine should consider brake calipers with more or larger pistons. Different brake discs offered absorb the heat energy developed during braking.

Please refer to the Product Description section and the supplied documentation for additional information.

McFARLANE® AVIATION MC0543022-2 Series FAA-PMA approved nose wheel steering rods s are intended for use on for Cessna 172 series aircraft replacing respective OEM steering rod,tube assemblies.They feature new re-designed long-life springs, hardened internal washer for greater durability, stainless steel tubes for improved corrosion resistance  and optimum performance even after years of service.

Cessna Models' Application List:

172D,E,F,G,H,I,K,L,M,P

P172,

R172K

F172D,E,F,G,H,K,L,M,N,P

FP172

FR172E,F,G,H,J,K

172R

172S

BERINGER AERO manufactures a range of wheels, brakes and related parts for use on certfied and non-certified aircraft (LSAs, experimentals and gliders). Their product portfolio includes among others wheels,Certified (STC) and Non Certified wheel/brake assemblies, wheel and brake parts and related tools.

Wheel and brake parts are included in this presentation while wheels and wheel/brake assemblies and tire options are separately presented.

For more information please refer to the Product Description section and the supplied documentation or contact us.

The FIRESTONE® TIRE and RUBBER Company was a manufacturer of tires for automobiles with an extensive product portfolio ranging from consumer, commercial bus & truck to off-the-road, agricultural tires and tire tubes. Early leader in the mass production of tires FIRESTONE® became the original equipment supplier of Ford Motor Company automobiles. Acquired by the Japanese BRIDGESTONE® CORPORATION in 1988 it operates now as BRIDGESTONE® AMERICAS TIRE OPERATIONS, LLC and known as BRIDGESTONE® FIRESTONE®. FIRESTONE® tires are manufactured in multiple countries on strict guidelines, using modern technologies and high-quality raw materials.

For additional information on BRIDGESTONE® FIRESTONE® tires & tire tubes please refer to the Product Description section & the supplied documentation.

AIRFRAMES ALASKA designs and manufactures ALASKAN BUSHWHEEL (ABI) wheels & brakes and tires made for flying and landing off-field in the most rugged backcountry conditions. ABI tires absorb the energy of rough landings, taking the brunt of the impact off the pilots, wheels, gear, and airframe. Unlike your standard aircraft tires, Bushwheels are tubeless. This distinctive design eliminates the problem of tire slippage and stem shearing and makes it possible to run these tires at very low PSI. Different models are offered to suit needs of aircraft operating conditions. ABI tires are FAA TSO C62d approved. Models are available in the following versions and fit standard 6" wheels unless otherwise mentioned:

Standard thread: 3/16"

Heavy thread: 1/4". Heavy tread 26" ABI tires are constructed with a thicker tread layer. Suitable for pilots operating their aircraft on pavement between backcountry flights.

The 26" ABI tires are designed and handcrafted for use on lighter aircraft such as Cessna 182 & Cessna 206. They're also the ideal "entry level" bush tires for pilots upgrading from standard tube type aviation tires for the first time.

A step up in terms of size, 29" ABI tires have a slighter profile and create less drag than larger Bushwheels. This places these bush tires in size/weight sweet spot for heavier aircraft like Cessna and Maule while still providing the footprint and energy absorption critical in bush landings. 

The 31" ABI tires are handcrafted featuring an impressive ratio of weight to size. Their solid footprint makes these bush tires the de facto standard for bush pilots.

The 35" ABI tires are designed for the most rugged off-airport operations. They require ABI 10650 10" wheels.

The 35" Beaver ABI tires stand up to the heavier load of de Havilland Beaver and Pilatus aircraft with a gross weight up to 5600 lbs (2800 static load rating per tire).

MICHELIN® Aircraft Tyres is internationally recognized as the No.1 tire manufacturer in the world. The company provides bias tires, radial tires, and tubes for aviation customers around the world, in a range of applications including commercial and regional airlines, general aviation and military aviation. 

Michelin® AIR® Aircraft Tires offer just the right balance of performance and durability required by demanding pilots. The sidewall compound is optimized to provide maximum ozone and ultraviolet light protection, while the MX2000 tread compound is Michelin’s toughest. In addition, the new Air Cushion Inner Liner provides a protective cushion over the casing plies which guards against inner tube chafing. And the “Posi-Fit” bead construction reduces movement between the tire and the wheel for improved lateral stability. Offered in NEW or USED (RETREAD) (*) Condition.

Michelin® AIR® Aircraft Tires are designed to provide:

- a very long tire life and lower maintenance costs due to fewer tire changes

- exceptional balance for smooth taxiing,even wear, and heat resistance

- maximum protection against sidewall cracking caused by ozone and UV light

- excellent lateral stability and impact absorption, even under rough landing conditions

Product Features:

Deep Tread Depth: Thick rubber in the tread area helps provide for a long tire life. Contributes to lower maintenance costs due to fewer tire changes.

Unique Bead Construction: Provides a firm (tight) fit to help reduce movement between the tire and wheel. Helps improve lateral stability for a long tire life, even under rough landing conditions

Optimized Casing Design: Proprietary Michelin production processes help balance stresses within the tire structure. Strong, yet lightweight nylon cords are designed to exceed strict industry standards for overpressure strength. Results in an effi cient, lightweight product with excellent balance properties for smooth taxiing, even wear, and resistance to heat buildup for a long tire life.

Customized Rubber Compounds: Sidewall is optimized for both ozone and ultraviolet light protection which helps reduce ozone cracking in key areas of the tire. Provides our maximum amount of exterior wear and crack resistance for a long tire life.

Contoured Shoulder Design: Helps absorb lateral impacts associated with landing. Designed to help the tire achieve a full life, even under adverse conditions.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

TOST Flugzeuggerätebau designs and manufactures top quality products including aircraft wheels, brakes, tires, tubes, glider towing and launching equipment and tow releases serving the needs of aviation sports and industry. TOST and TOST AERO brands for tires are synonyms for safety in aviation. 

For more than 30 years TOST has manufactured aircraft tires from 3" to 10" exclusively under the TOST AERO brand with a long lifetime, robustness and capability for high loads and speeds. TOST AERO tires and tires from other brands can be used with TOST wheels designed to cover a wide range of applications in gliders, motor gliders, aircraft, ultralight, amphibium aircraft, helicopters and gyrocopters but also in heavy-duty applications. Matching tire tubes with different valves and valve extensions are also offered by TOST to cover application requirements.

For additional information please refer to the supplied documentation.

CLEVELAND WHEELS & BRAKES, part of PARKER HANNIFIN CORPORATION, offers an extensive range of FAA-PMA approved master brake cylinder assemblies for use in different aircraft.

CLEVELAND master cylinders come in push or pull types in different bore, stroke and displacement variations in inches and 7/16-10 or 1/8-27 N.P.T. port sizes. Some models include parking valves and reservoirs. 

For additional information please consult the supplied documentation on technical characteristics and suitability of the master cylinders for specific aircraft.

Wheels, used in conjunction with tires, provide support for the tires and weight of the aircraft. Combined with brakes, they assist in directional and stopping control during aircraft ground maneuvers, taxi, takeoff, and landing. Brake assemblies and disc combinations are designed to properly and safely decelerate the aircraft under various conditions. Brake assemblies consist of one or more pistons depending upon the aircraft requirements.
CLEVELAND Aircraft Wheel & Brake Division, a PARKER HANNIFIN business unit, designs and manufactures wheels, brakes & assemblies for worldwide aircraft markets. CLEVELAND brand wheels and brakes are used on more than 80 percent of general aviation aircraft while their wheel assemblies are offered for military and business aviation applications. Their product lines include both TSO'd aircraft wheels, brakes, and wheel and brake assemblies for nose and main wheels to meet a variety of aircraft specifications and brake assembly interfaces. Offered through their worldwide distributor network for quick parts availability. Main and nose wheels are made from either aluminum castings, magnesium castings, or aluminum forgings. The main wheels are of the divided type, incorporating inner wheel half and outer wheel half, plus a disc, which are fastened together with tie bolts, washers, and nuts. They are offered in different models to work with different tire sizes. For example, their main wheel assemblies are designed for 6.00-6 tube tires while their #40-87 nose wheel assemblies are designed for 5.00-5 tube tires. Both are intended for use in general and business aviation, turboprop passenger, and helicopter applications. Sold in single pieces or in pairs whenever specified. Their key features include:
• Low maintenance for tubeless or tube-type
• Tapered roller bearings for dimensional stability and long life
• Molded grease seals for superior bearing bore sealing properties
• Split-rim design to allow ease of tire mounting
• High-strength through-bolts
• Sand castings and forgings
Nose wheel assemblies are made of magnesium or aluminum. Their key features include:
Load Capacity: Static load from 500 to 8600 lbs
Bearing Type: Tapered roller bearings
Size: 4 to 16 inch bead seat diameter
Torque Rating: Nut torque rating 90 to 150 in-lb dry; from 105 to 300 lube torque lb-inch
Weight: 3 to 18 lbs
For more information on the parts and quantities per assembly please refer to the respective illustrative parts list or contact us.
FAA 8130-3 Release Certification is available at additional cost. Please specify at the time of ordering.
Appearing prices are for units in NEW Condition. For units in USED Condition (mostly SERVICEABLE/OVERHAULED with proper certification) please contact us for availability and quotation.
Note: NCNR products: non-cancellable/non-returnable once the order is placed. Often require backordering to the manufacturer with significant lead times.