AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. It is  frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and other equipment, pressure vessels, treadplate, containers, and applications.  Alloy 5052 has a good marine atmosphere corrosion resistance of saltwater and excellent workability. Main features of this alloy include: non heat-treatable, excellent weldability, high corrosion resistance, smooth surface, lightweight, high-tensile strength.

Extruded bars/rods from 5052 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers.

AVIATIONEU NEW ERA Aluminum 5052 H32 Temper round bars/rods are non-heat treatable, weldable, highly resistant to corrosion, used for marine, chemical and petrochemical applications. They are hardened by cold work and have good forming characteristics and corrosion resistance, including resistance to salt water. Although easily welded, they are not recommended for brazing and soldering applications. Main features of these bars/rods include their corrosion resistance, particularly in marine applications, adaptability to most mechanical and finishing processes although the heavier anodic films may take on a yellowish cast as well as fair machining with the proper set-up. They are offered in different thicknesses, widths and pre cut lengths in inches.

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AL7050 (known as a commercial aerospace alloy) is a heat-treatable aluminium alloy with zinc as the main alloying element, combining high mechanical strength, good stress corrosion cracking resistance and toughness at subzero temperatures. Typical mechanical properties of 7050 aluminum in metric and imperial systems include a tensile strength of 515 MPa (74695 psi), a yield strength of 455 MPa (65992 psi) and a fatigue strength of 240 MPa (34809 psi). Particularly suitable for heavy plate aerospace and other commercial and military applications, such as fuselage frames, bulkheads, wing skins and aircraft structures.

Extruded bars from 7050 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered in different shapes, (round, rectangular and square), tempers (e.g. as Fabricated (F) or H112 tempered), specifications, diameters/thicknesses and cut-to-oder lengths to meet order requirements. 

7070 aluminum alloy square bars are available in different dimensions 5 mm × 5 mm (13/64" x 13/64") up to 150 mm × 150 mm (5-29/32" x 5-29/32") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film. 

AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. Although It is non heat-treatable, it is the highest strength alloy of other non-heat-treatable grades also featuring an excellent weldability using most common techniques, high resistance to marine atmoshpere and salt water corrosion, smooth surface, lightweight and high-tensile strength. This alloy is comparable to the 6061 aluminum alloy (AL6061). 

AL5052-O CLAD (ALCLAD) tubes(*) are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other grade aluminum and steel alloys. Sourced from quality producers, they are offered as Annealed in different outer diameters and wall thicknesses in inches and  cut to order lengths up to 5 ft (60 in.). They can be used for low and medium pressure hydraulic systems, fuel lines and oil lines. Tubing is sold by foot. There is additional cost if manufacturing test reports are required.

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the supplied documentation or contact us for quotation.

(*) ALCLAD is a corrosion-resistant aluminium sheet formed from high-purity aluminium surface layers metallurgically bonded (rolled onto) to high-strength aluminium alloy core material. As an enhanced sheet for fuselage applications, ALCLAD offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. ALCLAD also offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

SAE AISI(*) 1018 (G10180**) and 1020 (G10200**) mild/low carbon steel grades are very similar. Both SAE AISI 1018 steel and SAE AISI 1020 (see separate product presentation) carbon steels are iron alloys with their alloy composition being basically identical. Please refer to the supplied documentation for the comparison of SAE-AISI 1018/1020 steel properties. An overview of AISI/SAE 1018 Carbon Steel properties and fabrication processes is provided at the Product Description section. Technical data of supplied materials should be used ONLY FOR REFERENCE, NOT FOR DESIGN, and any decisions on their use remain entirely at the buyer discretion.

SAE AISI 1018 mild/low carbon steel has excellent weldability and produces a uniform and harder case and it is considered as the best steel for carburized parts. This alloy offers a good balance of toughness, strength and ductility. Provided with higher mechanical properties, AISI 1018 hot rolled steel also includes improved machining characteristics and Brinell hardness. Also used in bending, crimping and swaging processes, fixtures, mounting plates and spacers, applications that do not need high strength of alloy steels and high carbon or to improve drilling, machining, threading and punching processes and prevent cracking in severe bends.

Sourced from quality producers, SAE AISI 1018 and 1020  low carbon steel tubes  are offered as part of our own branded (AVIATIONEU NEW ERA) product lines in different forms (cross sections), round, square, rectangular, etc. and dimensions in inches or millimeters (depending on the supplier) to meet project requirements.  In the case of round tubes, they can be furnished Normalized, Annealed or other conditions, in different specifications in pre cut or cut to order lengths. For those in Metric system outer diameters and wall thicknesses are specified in mm and lengths in meters or centimeters. For those in inch system outer diameters and wall thicknesses are in inches and lenghts in inches or feet.  Appearing prices for pre cut tubes are per piece in indicated dimensions.

(*) American Iron & Steel Institute (AISI), Society of Automotive Engineers (SAE).

(**)  Unified Numbering System ( UNS) Number. UNS is an alloy designation system for Metals & Alloys providing a means of correlating many internationally used metal and alloy numbering systems administered by their producers, societies, trade associations, and individual users.

AVIATIONEU NEW ERA extruded round bars/rods from 7075 aluminum alloy are competitively priced, sourced from certified manufacturers, produced as per ASTM specification and offered as Fabriacted (F) or H112 tempered. Used in aviation and industrial applications (constructions, transportation tools, etc). They are available in outer diameters 6 mm (15/64'') -300 mm (11-13/16") and length up to 12000 mm (12 m). Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 1 US Ton. Sea/sea-surface transport to destination. Appr. time for shipping: 1 month from the time of order payment. Appearing price is indicative per unit of sale. Please contact us for for additional information and quotation.

Our Quick Guide for Aluminum Alloys & Tempers is now available. Please see attached file.

Steel alloy 4130 (ST4130),aka Chrome Moly,after the 2 key composition elements,chromium & molybdenum,is a general-purpose alloy steel widely used by the aviation and motorsports industries due to its weldability, fabrication and mild hardenability in all offered forms (tubes, bars/rods, sheets and plates). Available in two material states (Normalized and Annealed) depending on the process of how the material is heated and cooled.The Normalized condition (aka "Condition N") is the harder and stronger condition, best used when forming is not needed while the Annealed condition (aka "Condition A") is the softer and formable condition.

4130 steel bars/rods in round, rectangullar (flat), square and hexagonal shapes (cross sections) are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. Sourced from quality producers, most of these bars/rods are produced, unless otherwise specified, as “Cold Finished Normalized” (aka “Condition D4”), indicated by the letters "NRZ" and  "CF" in the product SKUs. They come in different dimesions in inches and cut to order (CTO) lengths in feet (*) and meet several AMS specifications, most common being AMS-S-6758 and AMS- 6348. They are widely used in a variety of applications due to their excellent strength to weight ratio,weldability by all conventional methods and resistance to scaling and oxidation. 

Unless otherwise mentioned, there is additional cost if manufacturing test reports are required. For additional information, please refer to the supplied documentation, the individual product presentations or contact us.

(*) As per vendors' requirements, certain 4130 steel bars/rods are ONLY SOLD in 3 feet increments, i.e. cut lengths can only be set to 3, 6, 9 feet etc. as mentioned in the respectivel product presentations. In this case, appearing prices are per 3 feet length and the Minimum Order Quantity (MOQ) is 3 pieces for each of selected rod/bar. Required cut lengths should be specified at the time of ordering.

AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. Although It is non heat-treatable, it is the highest strength alloy of other non-heat-treatable grades also featuring an excellent weldability using most common techniques, high resistance to marine atmoshpere and salt water corrosion, smooth surface, lightweight and high-tensile strength. This alloy is comparable to the 6061 aluminum alloy (AL6061). 

AL5052-O aluminum alloy Annealed round tubes are offered as part of our own branded (AVIATIONEU NEW ERA) product and can be used for low and medium pressure hydraulic systems, fuel lines and oil lines. They withstand a higher pressure than 3003-0 tubing and can be gas, arc and resitance welded and coiled.  They meet WW-T-700/4, AMS 4070M and ASTM-B-210-12 specifications. Sourced from quality producers, they are offered in different outer diameters and wall thicknesses in inches and pre cut lengths of 6 feet and in 6 ft increments each. Cuts to smaller lenghts may be arranged with the supplier providing that minimum order quantity requirements are observed. They are also offered as ALCLAD for the enhancement of their corrosion-resistance (please refer to the separate product presentation). There is additional cost if manufacturing test reports are required. For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the supplied documentation or contact us for quotation.

Steel alloy 4130 (ST4130), also known as Chrome Moly after the 2 key elements of its composition, chromium, and molybdenum, is a general-purpose alloy steel widely used by the aviation and motorsports industries due to its weldability, fabrication, and mild hardenability in all offered forms (tubes, bars, sheets and plates). They are available in two different material states (Normalized and Annealed) depending on the process of how the material is heated and cooled.

The Normalized condition (sometimes referred to as "Condition N") is the harder and stronger condition and is best used when forming is not needed. Normalizing relieves internal stress on steel and improves toughness in steels that may harden after the cold working process.

The Annealed condition (sometimes referred to as "Condition A") is the softer and formable condition and is best used when forming is needed. Annealing relieves internal stresses, softens and makes the material more ductile.

4130 steel bars/rods are offered as part of our own branded (AVIATIONEU NEW ERA) product lines, featuring good strength and weldability without compromising steel abrasion or impact resistance. They do not require further heat treatment and are commonly used in structural applications, including gears, fasteners, and some aircraft exterior. Offered in Normalized condition and Cold Finished as indicated by the letters "NRZ" and  "CF" respectively in the product reference code (SKU). These bars/rods comply with ASTM -A108, AMS -6348, AMS -6370 & AMS/MIL -S-6758 specifications. Available in different diameters and lengths in inches. Unless otherwise mentioned, there is additional cost if manufacturing test reports are required.

For additional information, please refer to the supplied documentation, the individual product presentations or contact us.

A castellated nut, also referred to as a castle nut or slotted nut, is a nut with slots (notches) cut into one end. Although castellated nuts are frequently referred to as slotted nuts, there are slight differences. Castellated nuts are formed with a round section at the top where the slots are located. Slotted nuts do not have this rounded modification. The flat sides of slotted nuts extend fully from the top to the bottom of the nut. Both castellated and slotted nuts are designed to use a pin (usually a split pin) that fits through the slots and through a hole in the screw to which the nut is attached. This pin prevents the nut from turning and loosening. Compared with slotted nuts, castellated nuts allow the cotter pin to be confined closer to the margins of the nut itself, providing added secureness.

MS14144 Series nuts are slotted hexagon style lightweight castellated self locking nuts manufactured from steel and cadmium plated. They are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines in different sizes with right-hand thread direction and a dry film lubricant as applicable, specified by the letter "L" in the part number.

Note: Depending on availability,these parts part may be supplied without or with Dry-Film Lubricant indicated by letter "L" in the SKU.

J.LANFRANCO & CIE is a manufacturer of high performance fasteners including all-metal and nylon insert locknuts, clinch nuts and inserts, modular fixtures, bolts and washers.

J.LANFRANCO all-metal locknuts have no plastic inserts. They are suitable for applications under extreme temperatures, corrosive environments effective or those under high levels of vibration. J.Lanfranco all-metal locknuts come in different versions (types) outlined below:

ESL: Dual-slotted, all-metal, reusable slotted self-locking hexagon nuts. Extremely reliable with consistent prevailing torque, and no galling.

ERM: All-metal, reusable self-locking hexagon nuts with double slots & UNC/UNF or Metric moving washer. Time saver nuts with integrated disc spring washers for quick installations and absolute tension maintained under dynamic loads.

THU: Full-height, heavy hex industrial version of the ESL nuts. Feature a robust industrial design and superior resistance to vibration, corrosion, and temperature.

Single Slot Self-locking Hexagon nuts HCB, HCE & HCT. All supplied with ISO 965-2 standard threading. All offered in steel ISO 898-2/ISO 2320 & stainless steel ISO 3506-2/NF E 25-035-2 in different metric diameters, fine pitch, special height, non-standard hexagon on request.

HCB: Single-slotted, extra low height, locking jam nuts.

HCE: Single-slotted, normal self-locking hexagon nuts.

HCT: Reusable one-piece, full-height locknuts ideal for high temperature areas.

GSL: ISO 7042 locknuts offered in metric steel class 8, 10, 12 and stainless steel A2-70 & A4-80

HUS Starnut: Standard deformed thread locking nuts also known as a “top locking” type nuts.

SPR: Hex nuts with crimped, deflected metal ring.

SRF: Top locking style flange nuts in which locking is achieved by deformation of the last thread.

J.LANFRANCO nylon Insert locknuts are self-locking hex nuts with a standard or high temperature nylon ring to generate prevailing torque. Product portfolio includes a full line of metric nylon insert nuts as well as imperial NE, NU, NTU patterns in UNJC & UNJF thread form MIL-8879 or MIL-S-7742. Nylon Insert locknuts come in the following versions (types):

HMP ISO 10511: Low-height metric nylon insert locknuts to ISO 10511.

HUP ISO 7040: Nylon insert locknuts made to all major metric and imperial standards (ISO 7040, IFI 100/107). Available in carbon steel, stainless steel, and exotics. UNJC & UNJF threads are also available.

EUM: Nylon insert self-locking nuts with a free spinning conical washer.

J.LANFRANCO & CIE fasteners are widely used in different industries for automotive/bodywork, vehicle substructures, transportation plant construction, rail vehicles/bogies, energy supply/power plant construction, shipping but also for aerospace and defence applications.

For additional information please consult the Product Description section & the supplied documentation.

AIRPRO INDUSTRY CORP. manufactures professional quality air tools, hand  & auto repair tools and accessories for professional applications under  the brand name AIRPROWU. AIRPROWU extensive product line ranges from aircraft tools to industrial, automotive/motorcycle ,tooling/molding, construction and auto body shop solutions and solutions for electronic assembly lines. AIRPROWU product line of Hydraulic Riveters include pneumatic, industrial hydraulic, air hydraulic riveter tools and others. Please refer to the specifications of individual riveters.

Steel alloy 4130 (ST4130), also known as Chrome Moly after the 2 key elements of its composition, chromium, and molybdenum, is a general-purpose alloy steel widely used by the aviation and motorsports industries due to its weldability, fabrication, and mild hardenability in all offered forms (tubes, bars, sheets and plates). They are available in two different material states (Normalized and Annealed) depending on the process of how the material is heated and cooled.

The Normalized condition (sometimes referred to as "Condition N") is the harder and stronger condition and is best used when forming is not needed. Normalizing relieves internal stress on steel and improves toughness in steels that may harden after the cold working process. The Annealed condition (sometimes referred to as "Condition A") is the softer and formable condition and is best used when forming is needed. Annealing relieves internal stresses, softens and makes the material more ductile.

4130 alloy steel (Chrome Moly) seamless round tubes are offered in Normalized (N )  or Annealed (A) conditions as part of our own branded (AVIATIONEU NEW ERA) product lines. They have been for years the standard of the aircraft industry. These tubes offer good strength and weldability without compromising steel abrasion or impact resistance and can also be made even stronger through heat treatment. They are commonly used in in structural applications, gears, fasteners, and aircraft exteriors. Tensile Strength: 90,000 PSI. Available in a range of outer diameters, wall thicknesses in millimeters (mm) and pre-cut lengths of one meter or multiples or cut to order (CTO) lengths in centimeters (cm). Depending on the supplier, they comply with different standards/specifications, such as ASTM A 519 or AMS MIL-T6737. Unless otherwise mentioned, there is additional cost if manufacturing test reports are required. For additional information, please refer to the supplied documentation or contact us.

Aluminum alloy 6061 (AL6061), with magnesium and silicon as its major alloying elements, is the most commonly used aluminum alloy in the world. It is a cold-treated aluminum forging product with the advantages of 4000 Series and 5000 Series. When heat-treated, 6061 aluminum alloys are a great choice for general purpose uses and find many applications in structural materials, electronics, chemical equipment, and others. This alloy features high strength, good corrosion resistance, weldability, and machinability. It comes in different tempers  such as O (annealed), or tempered grades, 6061-T4 and 6061-T6. Compared to AL2024, the so-called aircraft aluminum, 2024 should be generally selected if strength is a priority or for forming applications.  In terms of machinability, 6061 aluminum is one of the most popular machining alloys and therefore often preferred if machining procedures are necessary for a project.

AL6061 tubes/pipes are offered as part of our own branded (AVIATIONEU NEW ERA) product lines.Tubes are designed to act as structural support, whereas pipes are designed to carry liquids and gases. AL6061 tubing come in different shapes (round, square, orthogonal and others), tempers (T6 or T651 ), dimensions and pre cut or cut to order lenght options with the ability to be heat treated for even higher strength, all at an affordable price. 

The AVIATIONEU NEW ERA 6061 T6 aluminum round tubes are offered as Drawn or Extruded (indicated respectively by the words "DRW" and "EXTRD" in the product SKU). They are available in different outer diameters, wall thicknesses and pre cut lengths in inches. The drawn tubes meet ASTM -B210 and AMS -4082 specifications while the extruded tubes comply with AMS-QQ-A-200/8, ASTM-B221, ASTM-B429 specifications. For additional information, please refer to our Brief Guide on Aluminum Grades & Temper Designations  or contact us.

AVRO TOOLS manufactures countersinking and pneumatic tools including high performance pneumatic rivet hammers, drills, precision microstops and tungsten bucking bars.

These AVIATIONEU NEW ERA hexagon locking nuts comform with ASTM A194 standard specification for carbon, alloy and stainless steel nuts used in high pressure, temperature or other special-purpose applications. They can be indicatively used in the process industries, such as petroleum and chemicals for pressure vessels, valves, flanges, and fittings. Sourced by certified manufacturers these nuts are competitively priced and offered in metric (M3 - M36 diameter) or inch (3/16" - 1.1/2") sizes, different thread types and grade range to meet respective design, service conditions, mechanical properties, and high temperature requirements. Please refer to ASTM A194  specification table for additional information. Sold in packs of 100 pcs each.  Appearing price is for reference only per pack. Please contact us for a quotation.

Aluminum alloys 6061 and 6063 (AL6061/AL6063), with magnesium and silicon as their major alloying elements, are both popular alloys used in extrusions for a variety of architectural, machinery, equipment, and consumer products. Similar in composition & mechanical properties they come as O (annealed), or in tempered grades. Their magnesium content provides increased strength, and silicon reduces their melting temperature. Their formability, weldability, corrosion resistance, and moderately high strength enhance their versatility. However, there are differences between them and factors affecting their suitability for different applications. 6061 aluminum is the most commonly used aluminum alloy in the world used in all kinds of applications ranging from electronics to welded assemblies. Compared to AL2024 (aka aircraft aluminum) 2024 aluminum’s higher yield strength makes it more suitable if strength is a priority. 6061 tubes, sheets, bars, and plates offer high- to moderate strength, excellent corrosion resistance, and superior machinability and weldability while 6063 aluminum tubes offer an excellent strength-to-weight ratio, superior corrosion resistance, and a fine appearance and finish.

AVIATIONEU NEW ERA seamless extruded round pipes from 6061/6063 aluminum alloy are competitively priced, produced as per ASTM B241 specification (also available in ASTM B209-04, B210M-05, B234M-04 & B221M-05a) and offered as T6 tempered. Available in outer diameters 12.7-1066.8 mm, wall thicknesses 1.5-150 mm and cut to order (CTO) lengths. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale. For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us.

Steel alloy 4130 (ST4130), also known as Chrome Moly after the 2 key elements of its composition, chromium, and molybdenum, is a general-purpose alloy steel widely used by the aviation and motorsports industries due to its tensile strength of 90,000 psi, weldability, fabrication, and mild hardenability in all offered forms (tubes, bars, sheets and plates). They are available in two different material states (Normalized and Annealed) depending on the process of how the material is heated and cooled.

The Normalized condition (sometimes referred to as "Condition N") is the harder and stronger condition and is best used when forming is not needed. Normalizing relieves internal stress on steel and improves toughness in steels that may harden after the cold working process. The Annealed condition (sometimes referred to as "Condition A") is the softer and formable condition and is best used when forming is needed. Annealing relieves internal stresses, softens and makes the material more ductile.

4130 alloy steel (Chromoly) tubes exhibit an excellent strength to weight ratio, they are malleable, very easy to weld, resistant to scaling and oxidation and have a clean, smooth finish on both the inside and the outside of the tubing. Square tubes are offered in Normalized (N) condition as part of our own branded (AVIATIONEU NEW ERA) product lines and conform to SAE AMS-T 6736 & AMS 6360 M(*) specifications. They can be furnished in different wall thicknesses, widths and heights in inches and in different pre cut lengths from 1 foot to 12 feet. Appearing selling prices are per foot of cut length. Unless otherwise mentioned, there is additional cost if manufacturing test reports are required. For additional information, please refer to the supplied documentation or contact us.

(*) Aerospace Material Specifications (AMS) established by the Society of Automotive Engineers (SAE).

AL6061 is an aluminium alloy, with magnesium and silicon as the primary alloying elements. It is one of the most common alloys of aluminum for general-purpose use. Commonly available in pre-tempered grades such as 6061-O (annealed) as well as tempered grades such as 6061-T6 or 6061-T651. It can be compared with AL5052 (the highest strength alloy of the more non-heat-treatable grades) as well as with AL6063 which  is similar in composition and mechanical properties. AL6061 main features include: heat-treatable, excellent machinability, excellent corrosion resistance, semi-smooth surface, lightweight, high-tensile strength. Commonly used in transportation components, recreation products, machinery and equipment, and consumer durables.

Extruded bars/rods from 6061 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers and offered as T6/T651 tempered. 

AVIATIONEU NEW ERA Aluminum 6061 T6 Temper round bars/rods are produced by extrusion and offered in different diameters and pre-cut lengths in inches to meet application requirements. They comply with ASTM-B221 and AMS-QQ-A-200/8 specifications. For additional information, please refer to our Brief Guide on Aluminum Grades & Temper Designations,  the individual product presentations or contact us.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

Cladding coils, strips & sheets produced by AUERHAMMER METALLWERK from clad materials with different properties including carbon steels, stainless steels, nickel and copper and FeNi alloys. Cladding process enables combination of a minimum of two different grades of metal (one base material and a layer material) to be joined and form a laminated rolled material with new desired properties, capabilities and functions. A wide range of metals can be combined using cold-rolled cladding process and resulting cladding products  can be furthered tailored to customer requirements by subsequent further cold-rolling and annealing production processes. Deliveries are possible in soft, deep drawing or cold-rolled quality depending on the intended use. Common material properties used for cladding and tested include yield strength,tensile strength, elongation, hardness, formability and grain size or other like electrical resistance. Please refer to the attached documentation for additional information.

The AL2024 aluminum alloy (with copper as the primary alloying element) also known as aerospace grade aluminum, is commonly used in aircraft structural applications due to its high strength and fatigue resistance.  It is suitable for applications requiring high stress and strain resistance. The AL2024 aluminum alloy is stronger but less versatile than AL6061 alloy, which is more corrosion resistant, easier to weld, and more suited to machining, but less strong than the AL7075 alloy.

AL2024 aluminum alloy sheets come as Annealed (O Temper) without heat treatment or as heat treated to attain their maximum strength. Heat treated sheets are available in vatious T tempers (such as T3,T4,T5,T6 and T651) for use in a range of aviation and industrial applications.

2024-O CLAD (ALCLAD) Aluminum alloy sheets(*) are offered as part of AVIATIONEU NEW ERA product lines and they consist an excellent choice when high corrosion resistance is needed. Sourced from quality producers, these sheets  are readily formed in the annealed condition and may be subsequently heat treated. They feature good machinability and can be machined to a high finish. They are offered in different thicknesses and specific widths and lengths in inches. They comply with AMS and ASTM specifications.

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the individual product presentations or contact us for quotation.

(*) ALCLAD is a corrosion-resistant aluminium sheet formed from high-purity aluminium surface layers metallurgically bonded (rolled onto) to high-strength aluminium alloy core material. As an enhanced sheet for fuselage applications, ALCLAD offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. ALCLAD also offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy.