AL6061 is an aluminium alloy, with magnesium and silicon as the primary alloying elements. It is one of the most common alloys of aluminum for general-purpose use. Commonly available in pre-tempered grades such as 6061-O (annealed) as well as tempered grades such as 6061-T6 or 6061-T651. It can be compared with AL5052 (the highest strength alloy of the more non-heat-treatable grades) as well as with AL6063 which  is similar in composition and mechanical properties. AL6061 main features include: heat-treatable, excellent machinability, excellent corrosion resistance, semi-smooth surface, lightweight, high-tensile strength. Commonly used in transportation components, recreation products, machinery and equipment, and consumer durables.

Extruded bars/rods from 6061 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 6061 H112 Temper round bars are offered in different diameters 6 mm (15/64'') -300 mm (11-13/16") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

AL6061 is an aluminium alloy, with magnesium and silicon as the primary alloying elements. It is one of the most common alloys of aluminum for general-purpose use. Commonly available in pre-tempered grades such as 6061-O (annealed) as well as tempered grades such as 6061-T6 or 6061-T651. It can be compared with AL5052 (the highest strength alloy of the more non-heat-treatable grades) as well as with AL6063 which  is similar in composition and mechanical properties. AL6061 main features include: heat-treatable, excellent machinability, excellent corrosion resistance, semi-smooth surface, lightweight, high-tensile strength. Commonly used in transportation components, recreation products, machinery and equipment, and consumer durables.

Extruded bars/rods from 6061 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as  T6/T651 tempered in different dimensions. 

AVIATIONEU NEW ERA 6061 Aluminum square/rectangular bars are produced by extrusion and are offered in T6 or T651 Tempers, in different dimensions in inches and cut to order lengths in feet (in increments of one foot) to meet application requirements. They comply with ASTM-B221 and AMS-QQ-A-200/8 specifications. For additional information, please refer to our Brief Guide on Aluminum Grades & Temper Designations,  the individual product presentations or contact us.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AL6061 is an aluminium alloy, with magnesium and silicon as the primary alloying elements. It is one of the most common alloys of aluminum for general-purpose use. Commonly available in pre-tempered grades such as 6061-O (annealed) as well as tempered grades such as 6061-T6 or 6061-T651. It can be compared with AL5052 (the highest strength alloy of the more non-heat-treatable grades) as well as with AL6063 which  is similar in composition and mechanical properties. AL6061 main features include: heat-treatable, excellent machinability, excellent corrosion resistance, semi-smooth surface, lightweight, high-tensile strength. Commonly used in transportation components, recreation products, machinery and equipment, and consumer durables.

Extruded bars/rods from 6061 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 6061 H112 Temper square bars are offered in different dimensions 5 mm × 5 mm (13/64" x 13/64") up to 150 mm × 150 mm (5-29/32" x 5-29/32") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Aluminum alloys 6061 and 6063 (AL6061/AL6063), with magnesium and silicon as their major alloying elements, are both popular alloys used in extrusions for a variety of architectural, machinery, equipment, and consumer products. Similar in composition & mechanical properties they come as O (annealed), or in tempered grades. Their magnesium content provides increased strength, and silicon reduces their melting temperature. Their formability, weldability, corrosion resistance, and moderately high strength enhance their versatility. However, there are differences between them and factors affecting their suitability for different applications. 6061 aluminum is the most commonly used aluminum alloy in the world used in all kinds of applications ranging from electronics to welded assemblies. Compared to AL2024 (aka aircraft aluminum) 2024 aluminum’s higher yield strength makes it more suitable if strength is a priority. 6061 tubes, sheets, bars, and plates offer high- to moderate strength, excellent corrosion resistance, and superior machinability and weldability while 6063 aluminum tubes offer an excellent strength-to-weight ratio, superior corrosion resistance, and a fine appearance and finish.

AVIATIONEU NEW ERA seamless extruded round pipes from 6061/6063 aluminum alloy are competitively priced, produced as per ASTM B241 specification (also available in ASTM B209-04, B210M-05, B234M-04 & B221M-05a) and offered as T6 tempered. Available in outer diameters 12.7-1066.8 mm, wall thicknesses 1.5-150 mm and cut to order (CTO) lengths. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale. For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us.

Aluminum alloy 6061 (AL6061), with magnesium and silicon as its major alloying elements, is the most commonly used aluminum alloy in the world. It is a cold-treated aluminum forging product with the advantages of 4000 Series and 5000 Series. When heat-treated, 6061 aluminum alloys are a great choice for general purpose uses and find many applications in structural materials, electronics, chemical equipment, and others. This alloy features high strength, good corrosion resistance, weldability, and machinability. It comes in different tempers  such as O (annealed), or tempered grades, 6061-T4 and 6061-T6. Compared to AL2024, the so-called aircraft aluminum, 2024 should be generally selected if strength is a priority or for forming applications.  In terms of machinability, 6061 aluminum is one of the most popular machining alloys and therefore often preferred if machining procedures are necessary for a project.

AL6061 tubes/pipes are offered as part of our own branded (AVIATIONEU NEW ERA) product lines.Tubes are designed to act as structural support, whereas pipes are designed to carry liquids and gases. AL6061 tubing come in different shapes (round, square, orthogonal and others), tempers (T6 or T651 ), dimensions and pre cut or cut to order lenght options with the ability to be heat treated for even higher strength, all at an affordable price. 

The AVIATIONEU NEW ERA 6061 T6 aluminum round tubes are offered as Drawn or Extruded (indicated respectively by the words "DRW" and "EXTRD" in the product SKU). They are available in different outer diameters, wall thicknesses and pre cut lengths in inches. The drawn tubes meet ASTM -B210 and AMS -4082 specifications while the extruded tubes comply with AMS-QQ-A-200/8, ASTM-B221, ASTM-B429 specifications. For additional information, please refer to our Brief Guide on Aluminum Grades & Temper Designations  or contact us.

Aluminum alloy 6061 is the most commonly used aluminum alloy in the world due to its positive characteristics. It has magnesium and silicon as its main composition elements and is a cold-treated aluminum forging product with the advantages of 4000 Series and 5000 Series. Aluminum 6061, T6 or T651 tempered sheets exhibit above average corrosion resistance, excellent processability with no deformations, high strength, light weight, good weldability, and the ability to be heat treated for even higher strength, all at an affordable price. The difference between T6 and T651 tempers of an 6061 aluminum sheet is that the internal stress of T6 is relatively large and the processing will be deformed under normal circumstances; the suitable state for processing should be T651, which is based on T6 to stretch and eliminate internal stress. Both are typically used in aerospace, automotive, cameras, couplings, marine hardware, electrical components, decorative hardware, structural applications, pins, brakes, pistons, valves, and bicycle frames. Aluminum alloy 6061-T6 sheets from AVIATIONEU NEW ERA product lines are offered in different pre cut thicknesses, widths and lengths and they are PVC covered one side. They meet AMS 4027/ASTM B209 specifications.

AL6061 is an aluminium alloy, with magnesium and silicon as the primary alloying elements. It is one of the most common alloys of aluminum for general-purpose use. Commonly available in pre-tempered grades such as 6061-O (annealed) as well as tempered grades such as 6061-T6 or 6061-T651. It can be compared with AL5052 (the highest strength alloy of the more non-heat-treatable grades) as well as with AL6063 which  is similar in composition and mechanical properties. AL6061 main features include: heat-treatable, excellent machinability, excellent corrosion resistance, semi-smooth surface, lightweight, high-tensile strength. Commonly used in transportation components, recreation products, machinery and equipment, and consumer durables.

Extruded bars/rods from 6061 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 6061 H112 Temper rectangular bars are offered in different dimensions 3.0 mm (1/8') -100 mm (3-15/16") × 10 mm (25/64") -300 mm (11 13/16") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.