AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. Although It is non heat-treatable, it is the highest strength alloy of other non-heat-treatable grades also featuring an excellent weldability using most common techniques, high resistance to marine atmoshpere and salt water corrosion, smooth surface, lightweight and high-tensile strength. This alloy is comparable to the 6061 aluminum alloy (AL6061). 

AL5052-O aluminum alloy Annealed round tubes are offered as part of our own branded (AVIATIONEU NEW ERA) product and can be used for low and medium pressure hydraulic systems, fuel lines and oil lines. They withstand a higher pressure than 3003-0 tubing and can be gas, arc and resitance welded and coiled.  They meet WW-T-700/4, AMS 4070M and ASTM-B-210-12 specifications. Sourced from quality producers, they are offered in different outer diameters and wall thicknesses in inches and pre cut lengths of 6 feet and in 6 ft increments each. Cuts to smaller lenghts may be arranged with the supplier providing that minimum order quantity requirements are observed. They are also offered as ALCLAD for the enhancement of their corrosion-resistance (please refer to the separate product presentation). There is additional cost if manufacturing test reports are required. For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the supplied documentation or contact us for quotation.

Grade 5052 aluminium alloy, with magnesium and chromium as the primary alloying elements is frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and other equipment, pressure vessels, containers, and other applications.  5052 aluminium alloy exhibits a good marine atmosphere corrosion resistance of saltwater and excellent workability. Main features of this alloy include: non heat-treatable, excellent weldability, high corrosion resistance, smooth surface, lightweight, high-tensile strength.

Extruded bars/rods (*) from 5052 aluminum alloy are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular, hexagonal or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and mostly offered as Fabricated (F) or H112 tempered. They are offered in Metric dimensions and cut to order lengths up to 12000 mm (12 m). AVIATIONEU NEW ERA Aluminum 5052 bars/rods consist a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Appearing price is indicative per unit of sale and can differentiate depending on the specifications of the ordered metals. 

In most cases, smaller quantities can be served by our suppliers' stocks within 10 days from order placement & payment. Availability for non stock sizes/quantities is  usually 1-2 months.

Packing includes waterproof paper, wooden boxes/pallets, steel band bundling etc. Sea/sea-surface transport to customer destination can be provided at additional cost.

Dimesion (size) ranges of offered AVIATIONEU NEW ERA Aluminum 5052 bars/rods per cross section:

Round: diameter from 4 to 650 mm

Square: dimensions from 4X4  to 200X200 mm

Rectangular: dimensions from  3X4 to 200X300 mm

Flat: dimensions from 3X4  to 10X675 mm

Hexagonal: A/F from 6 to 30 0mm

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

(*) Although the terms bars and rods are often used interchangeably and present general similarities, rods come in a smaller cross sections and are usually less strong and durable than bars. Due to their strength and durability, bars are often used in structural applications while rods are typically used in non-structural ones such as reinforcing, decorative and others.

AVIATIONEU NEW ERA round tubes from 5052 aluminum alloy are competitively priced, sourced from certified manufacturers, produced as per ASTM B210M specification and offered as Annealed (O-temper) or H112 tempered. Used in aviation and industrial applications (constructions, furniture, signs, etc). They are mill finished and available in outer diameters 5-650 mm, wall thicknesses 1-55 mm and lengths 1-13 m. Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 1 US Ton. Sea/sea-surface transport to destination. Appr. time for shipping: 1 month from the time of order payment. Appearing price is indicative per unit of sale. Please contact us for for additional information and quotation.

Our Quick Guide for Aluminum Alloys & Tempers is now available. Please see attached file.

AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. Although It is non heat-treatable, it is the highest strength alloy of other non-heat-treatable grades also featuring an excellent weldability using most common techniques, high resistance to marine atmoshpere and salt water corrosion, smooth surface, lightweight and high-tensile strength. This alloy is comparable to the 6061 aluminum alloy (AL6061). 

AL5052-O CLAD (ALCLAD) tubes(*) are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other grade aluminum and steel alloys. Sourced from quality producers, they are offered as Annealed in different outer diameters and wall thicknesses in inches and  cut to order lengths up to 5 ft (60 in.). They can be used for low and medium pressure hydraulic systems, fuel lines and oil lines. Tubing is sold by foot. There is additional cost if manufacturing test reports are required.

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the supplied documentation or contact us for quotation.

(*) ALCLAD is a corrosion-resistant aluminium sheet formed from high-purity aluminium surface layers metallurgically bonded (rolled onto) to high-strength aluminium alloy core material. As an enhanced sheet for fuselage applications, ALCLAD offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. ALCLAD also offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. It is  frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and other equipment, pressure vessels, treadplate, containers, and applications.  Alloy 5052 has a good marine atmosphere corrosion resistance of saltwater and excellent workability. Main features of this alloy include: non heat-treatable, excellent weldability, high corrosion resistance, smooth surface, lightweight, high-tensile strength.

Extruded bars/rods from 5052 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers.

AVIATIONEU NEW ERA Aluminum 5052 H32 Temper round bars/rods are non-heat treatable, weldable, highly resistant to corrosion, used for marine, chemical and petrochemical applications. They are hardened by cold work and have good forming characteristics and corrosion resistance, including resistance to salt water. Although easily welded, they are not recommended for brazing and soldering applications. Main features of these bars/rods include their corrosion resistance, particularly in marine applications, adaptability to most mechanical and finishing processes although the heavier anodic films may take on a yellowish cast as well as fair machining with the proper set-up. They are offered in different thicknesses, widths and pre cut lengths in inches.

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.