Countersinking is used to ensure that flat head screws or fasteners sit flush against the workpiece. JITTERBUG Pilot Countersink Cutters can be used with flush rivets in different countersinking applications. They consist cost effective alternatives to other brands. They are available separately or in convenient sets of different pilot diameters. Offered sets include 6 pieces (1/4 5/16 3/16 5/32 3/32 1/8 in.) or 4 pieces (3/16 5/32 3/32 1/8 in.) per set. For additional information please consult the supplied documentation or contact us.

Rivet Pin Gauges from HI-SHEAR CORPORATION,  subsidiary of LISI AEROSPACE, can be used for inspection or measurement of correct grip length of HI-LITE™ / HI-LOK™ rivet pins. Different HI-SHEAR Pin Protrusion Gauges are offered for respective HI-LITE™ / HI-LOK™series pins. HI-SHEAR Grip Gauge Assemblies can be used to measure the “grip length” of HI-LOK™ and HI-LITE™ pins, shear lockbolts, structural screws and bolts. The HI-SHEAR 2-651 Grip Gauge Assembly includes one HI-SHEAR 2-612 Grip Gauge & one HI-SHEAR 2-615 Grip Gauge Slide. The 2-612 Grip Gauge measures in increments 1/16” to 3”(1 mm to 75 mm). Made from spring temper stainless steel, 3/4" x 6-1/4".

Nylon Insulated Diamond Grip (PIDG) Knife Disconnect Splices with body plating of copper, tin and wire insulation support. Offered in different models for respective use with wire insulation diameters.Two required per assembly.

Apex® Tool Group (ATG) is one of the largest manufacturers of professional hand and power tools in the world, serving the industrial, vehicle service and assembly, aerospace, electronics, construction and serious DIY markets. 

APEX® Fasteners Tools is one of ATG brands for fasteners and tools. The product portfolio includes:

Insert and power drive bits to meet a huge variety of fastener styles including Phillips, Slotted, Torx®, Torx Plus®, Torx® Tamper Resistant, Torx Plus® Tamper Resistant, Pozidriv®, Sel-o-fit®, Quadrex®, Frearson, B.N.A.E., Socket Head, Square Recess, Torq-Set®, MorTorq®, Tri-Wing®, Hi-Torque® and Triple Square.

Magnetic and quick release bit holders enabling the flexible use of insert bits with a variety of tools. In addition, Apex offers a complete line of quick release chucks for fast and easy power bit changes.

Hand Drivers for interchangeable insert bits and magnetized drivers.

Hex drive nutsetters, drive sockets, extensions and universal wrenches allowing nutrunning in all types of applications.

Special sockets & accessories from tap holding sockets to grease fitting sockets to meet a wide range of fastening needs.

For additional information please consult the supplied documentation.

ERNEST H HILL LIMITED (HILL PUMPS) is a manufacturer of fluid transfer equipment for automotive and industrial lubrication, petrochemical, industrial, agricultural and aerospace fluid transfer applications.

HILL supplies a comprehensive range of pumps, lubrication, garage & workshop equipment to all types of industries, from aviation & agricultural pumps to industrial and automotive servicing equipment.

HILL pumps are designed for use with chemicals, oils, AdBlue/UREA, water, diesel, antifreeze, grease, gear oil. Their food grade approved pumps are intended for use within the food and drink sector. Apart from pumps HILL supplies  an extensive range of garage equipment such as hose reels and waste oil drainers. 

For additional information on HILL PUMPS products please consult the supplied documentation or contact us.

The 114 series C-Type compression riveters from the U.S. INDUSTRIAL TOOL COMPANY (USIT) can be used for assembly operations in aircraft, automotive, truck,bus components, boats, metal furniture, toys, electronic chassis & appliance assembly. One man operated, USIT rivet squeezers increase productivity securing high joint integrity with no dependance on operator's skill level. Available in standard and high output configurations. CE certified. They feature tandem cylinder doubling compression force available from tool, rolling cam and wedge assembly multiplying compression force of piston, "squeeze" action with throttle controllable speed permiting easy control, exceptional accuracy and uniformity & swivel air inlet aiding maneuverability. They develop full squeezing force at 90 P.S.I. 

ATS Pro-X rivet guns offer unmatched controllability when setting rivets of any type or size. They are used in aircraft manufacturing plants such as Boeing and Lockheed-Martin. With the improved variable power control, proper riveting can be accomplished with confidence.  Different models serve specification requirements (see attached table). 1/8" Aluminum (3/32" Steel) Rivet Capacity. These guns accept all .401 shank rivet sets and attachments. Non-slip Powder Coat Finish. 1/4" NPT Inlet. Lifetime ATS-Pro Warranty.

AIRPRO INDUSTRY CORP. manufactures professional quality air tools, hand  & auto repair tools and accessories for professional applications under  the brand name AIRPROWU. AIRPROWU extensive product line ranges from aircraft tools to industrial, automotive/motorcycle ,tooling/molding, construction and auto body shop solutions and solutions for electronic assembly lines. AIRPROWU compression riveters include different models covering different capacity requirements for aluminum and steel. They come in different dimensions and are  offered with matching yokes to cover various application needs. Please refer to the specifications of individual compression riveters.

The BAUER™ electric drills from HARBOR FREIGHT TOOLS are offered in different cord and cordless (battery) models and are intended for use in diffrent applications. Their all-metal gear construction ensures heavy duty performance with daily use. They also feature high performance motors to cover drilling, and fastening jobs, a compact lightweight design to minimize user fatigue and textured overmolds for secure grip and comfort.  Cordless models are available as unit only or as kit with battery, charger and/or other accessories.

Model 189SC-B 20v Lithium-Ion Cordless 3/8 In. Right Angle Drill  is the perfect configuration for drilling between studs and joists or other close-quarters work. The balanced right angle design is compact yet delivers a variable speed range of 0-650/0-2000 RPM. The LED provides a clear view in dark spaces. Compatible with all BAUER™ 20v Lithium-Ion tools. 

Model 1791C-B1 20v Lithium-Ion Cordless 1/2 in. compact  Drill/Driver Kit features a 2-speed selector matching speed and poer to application. It comes with 1.5Ah battery, charger, 2 impact bits and a rugged tool bag.

Model 1695E-B  is a 13  Amp 2-Speed 1/2 in. Heavy Duty Right Angle Drill Kit features a 2-speed selector (450/1750 RPM), a low gear clutch and comes with  a rugged tool case.

High-Speed Steel (HSS) is a metal alloy made up primarily of iron, tungsten, and carbon. It's known for its hardness, toughness, and ability to withstand high temperatures without losing its strength or shape. It also has excellent abrasion resistance properties, which make it useful for cutting tools. HSS drill bits are extremely hardwearing and particularly well designed for drilling into relatively hard metal surfaces and wood, as they are much more resistant to the heat generated from the fast speed operation. The front edges cut the material, whilst the spirals remove debris from the hole. Apart from HSS, Cobalt is often used as an alloying agent in steels to improve the hardenability, strength, and wear resistance in machining applications but also due to its ability to resist wear at higher temperatures while still maintaining its strength and shape. Cobalt-based alloys are typically harder than HSS alloys but are also more prone to cracking or chipping if not handled properly. Compared to HSS drill bits which are more elastic and, as such, don't break easily, those containing cobalt are more brittle and chip quickly.

Sourced from quality suppliers, threaded hex shank drill bits are offered as part of our own labeled (AVIATIONEU NEW ERA) product lines. Made from HSS or HSS Steel with Cobalt, these drill bits consist ideal tools for aircraft manufacturers, aircraft maintenance/repair stations or  industrial manufacturers, cost-effective alternatives to other OEM products and and stocked by our suppliers for fast deliveries. Offered in different types (stub, short or long), flute and overall lengths they are sold either separately (*) or in custom sets to address specific customer needs in machining applications.

Because of the difference in composition between HSS and Cobalt, main strengths of HSS drill bits are their high hardness and wear resistance. Therefore, as a general rule, they consist a better choice when you want your drill bits to retain their strength even when exposed to extreme wear or abuse. For higher hardenability, strength, and wear resistance and in applications when when drill bits are to be exposed to extremely high temperatures, cobalt drill bits should best be used.

For additional information please consult the supplied documentation or contact us.

(*) Minimum Order Quantities apply depending on the selected drill bits or their sets.

USATCO C-yokes are available for different mounting spacings and furnished with .187” or .250” set holes. Please refer to the attached catalog page and contact us for additional information.

RIPLEY® UTILITY TOOL® INFINITY Adjustable Cable Stripper is the industry’s most versatile, reliable and accurate adjustable heavy-duty tool for mid-span and end stripping on primary and secondary utility cables. It eliminates the need for traditional stripping knives, reducing the risk of cuts or lacerations. Its patent-pending, self-aligning design maintains optimum blade position to produce precise cuts for reliable splices & unions. Easily adjusts for 0.5″ to 2.5″ (12.7 mm to 63.5 mm) cable diameters with Standard & EPR optimised blades easily accommodating various jacket & insulation materials. Additionally it features recessed blade increasing safety & is easy replacement, adjustable blade depth & angle for greatest range of applications, detachable, ergonomic handles for use in tight spaces and optional blade depth gauge providing positive depth control while making blind cuts during mid-span applications.

ATS 7500 Aviation Piston Ring Compressor features a quick-change design to speed up piston ring installation. It includes HASTINGS Ring-O-Matic® pliers and bands that operate in all positions: not just vertically or horizontally. The pliers incorporates a precision locking action for exact holding and release of piston ring bands. The complete kit includes the Ring-O-Matic® pliers and one of each of the following size bands: 4-1/8" to 4-1/2", 4-1/2" to 4-3/4", 4-3/4" to 5", 5" to 5-1/4", and 5-1/4" to 5-1/2", 5-1/2" to 5-3/4". Shipping weight: 3 lbs (1.5Kg).

Countersinking is used to ensure that flat head screws or fasteners sit flush against the workpiece. Countersinks used in aerospace and industrial applications are made of durable materials such as High Speed Steel (HSS) known for its hardness, toughness, and ability to withstand high temperatures. High Speed Steel (HSS) countersinks are well suited for cutting aluminum sheet metals. When combined with Cobalt, an alloying agent in steels to improve the hardenability, strength, and wear resistance in machining applications but also due to its ability to resist wear at higher temperatures, the  respective countersinks are often used for cutting stainless steel and other aluminum alloys.

Sourced from quality suppliers, integral (fixed) pilot Microstop countersink cutters are offered as part of our own labeled (AVIATIONEU NEW ERA) product lines. Made from HSS or HSS Steel with Cobalt, they consist ideal tools for aircraft manufacturers, aircraft maintenance/ repair stations or  industrial manufacturers for precise and accurate countersinking, cost-effective alternatives to other OEM products and and stocked by our suppliers for fast deliveries. 

Offered in different flutes, body and pilot diameters and sold  either separately (*) or in custom sets to address specific customer needs in machining applications.

Because of the difference in composition between HSS and Cobalt, main strengths of HSS countersinks are their high hardness and wear resistance. Therefore, as a general rule, they consist a better choice when you want your countersinks to retain their strength even when exposed to extreme wear or abuse. For higher hardenability, strength, and wear resistance and in applications when when countersinks are to be exposed to extremely high temperatures, cobalt countersinks should best be used.

AVIATIONEU NEW ERA countersinks can be used with popular adjustable or Microstop countersinking units utilizing a threaded shank drive (sold separately). For additional information please consult the supplied documentation or contact us.

(*) Minimum Order Quantities apply depending on the selected countersinks or their sets.

WYMA PNEUMATIC TOOLS pneumatic screwdrivers meet the demands for industrial performance, accuracy and durability and feature an innovative ergonomic design and precise torque control necessary for critical fastening applications involving metals, plastics or composites. Their double hammer striking structure, undergoing a high number of revolutions, makes them suitable for high-yield industries, assembly lines, maintenance of wood and motor, aluminum hardware processing, home appliances, automobile and motorcycle manufacturing industry. WYMA has conducted professional heat treatment on the related components of the pneumatic screwdrivers to improve their mechanical properties and enable them to work consistently long hours in the assembly lines. Please refer to the technical specifications of individual screwdrivers.

The 12LiS Cordless Screw Gun from AVIATIONEU NEW ERA product line is an irreplaceable assistant both in life, and on production. This easy, compact screw gun with a rated voltage of 12 V features:

- a speed of 0-350/1200 rpm, 

- boss size: 10 mm, 

- torque 15 nanometers, 

- 2 accumulators with capacity 2 Ach providing long time to perform required works, 

- battery built-in indicators to show when the accumulator needs to be charged

- rubberized handles. 

- one year manufacturer's guarantee

AVIATIONEU NEW ERA 12LiS Cordless Screw Gun is delivered in a convenient plastic case, with a set of 2 Li-ion accumulators, the accumulator charging device and a trial nozzle. 

This tool is used to compress valve springs during valve removal and installation. It is ergonomically designed for shop and field use and comes with special pivot pin. Features alloy steel construction with black alloy conversion coating.

AVIATIONEU NEW ERA Screw Extraction Kit is intended for use as a removal tool of stuck or broken screws, bolts or studs.

The kit consists of a 6-piece standard screwdriver set and a T Type steel single sided ratchet wrench adjustable to handle fasteners of M3 to M8 sizes. 

It is a high quality, versatile, convenient, efficient and long service life kit that can be used for home and professional applications in bikes, cars, electronics, household appliances, mobile repairs and other uses.

The 6-piece standard screwdriver set and the ratchet wrench can be bought separately although the kit provides a cost effective solution.

AIRPRO INDUSTRY CORP. manufactures professional quality air tools, hand  & auto repair tools and accessories for professional applications under  the brand name AIRPROWU. AIRPROWU extensive product line ranges from aircraft tools to industrial, automotive/motorcycle ,tooling/molding, construction and auto body shop solutions and solutions for electronic assembly lines. AIRPROWU product line of Hydraulic Riveters include pneumatic, industrial hydraulic, air hydraulic riveter tools and others. Please refer to the specifications of individual riveters.

USATCO C-Yoke riveters are available in single cylinder and tandem cylinder types, both in standard and high force versions. They cover different capacity requirements for use in aluminum and steel and feature quiet, easy operation, CE approval and swivel air inlets. Clamping force exceeds federal specifications.