Range of special accessories by FRANZ AIRCRAFT ENGINES for use in BRP-ROTAX® aircraft engines and other applications.

Pitot tubes scan the static and dynamic pressure, and they are used on aircraft to determine the aircraft airspeed. 

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality. 

FALCON GAUGE Non TSO'd (non-certified) pitot tubes have been used for many years on different types of experimental or other aircraft where no certification is required. Available in different heated and unheated versions for 12 or 24 V electrical supplies, for vertical or flat installations. Standard (3/4") and long (4") mounting brackets are offered. Heated Material: Stainless Steel. Please consult the supplied documentation or contact us for further information.

GARMIN® GTX™ transponder product line includes Mode A/C and Mode S TSO'd panel mounted transponders offered in a‭ ‬wide variety of configurations to choose‭ ‬from‭, ‬depending on desired functions‭.‬ Different models are listed under separate product presentations. 

GARMIN® GTX™ 327  is a TSO-certified Mode C digital transponder. Its innovative features, proven performance and reliability bring a whole new level of transponder utility to your aircraft. Features include a solid state design, and with no warm up time, lower power consumption and much lower heat emissions for a longer service life. It provides 200 watts nominal power output and has an easy-to-read DSTN liquid crystal display which reverses the numbers out of black for optimal viewing. An innovative keypad facilitates entering a squawk code while a dedicated VFR button allows for quick-and-easy VFR squawking. Similar to the GTX™ 330 Mode S transponder, the GTX™  327 also offers several timing and display functions, including flight time, count-up and count-down timers, as well as current pressure altitude.

GARMIN® GTX™ 327 Specifications:

Solid State Digital Transmitter

Mode: A/C

Display: DSTN LCD Display

Nominal Output Power: 200 watts 

Dimensions: 6.25"W x 1.65"H x 8.73"D (15.9 x 4.2 x 22.2 cm)

Weight: 3.1 lbs. (1.4 kg)

Product includes: GTX 327 Transponder, Installation kit, Pilot's guide

GARMIN AERA 660 Portable GPS provides affordable feature-rich navigation, stunning display and streamlined database updating. It features a 5-inch capacitive touchscreen display, Connext® wireless capabilities for database updating , Garmin WireAware™ wire-strike avoidance technology, 3D Vision of rising terrain near the aircraft, while overlaying GPS-derived airspeed, altitude and vertical speed alongside flight plan information and more. Offered with different navigation databases.

The RCA 56 Series of electric turn and bank indicators by KELLY MFG (RC ALLEN) are an all volt instrument, with a power warning flag, a black or white ball inclinometer and either lighted or non-lighted. These rate-of-turn pointer controlled instruments are powered by an electrically driven DC precision gyro with an inclinometer providing the pilot with turn and bank information.  They meet or exceed requirements of FAA TSO C3b. Made in the USA. Weight: 1.9 lbs.

Dimensions: Length: 6 1/4 in. Max, Width: 3 3/8 in. Max, Height: 3 3/8 in. Max

Mating Connector: MS3106A10SL-3S.

Connector Pin Out: A: +11-30 VDC, B: Ground, C: Spare

KANARDIA diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters includes different RPM, CHT, EGT and oil/temperature engine gauges. 

KANARDIA INDU Series round RPM gauges are offered as standalone (master) or as slave gauges. The slave version requires an engine monitoring unit (DAQU) to be present on the bus. KANARDIA INDU Series round RPM gauges are available for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15"). They can be supplied in the following scales:

-RTX Rotax scale (7000) and markings (yellow, green, red)

-JAB Jabiru scale (3500). Markings must be specified at the time of ordering

-LYC Lycoming scale (3000). Markings must be specified at the time of ordering

-D D-motor scale (3100). Markings must be specified at the time of ordering

-CUS Custom made scale

KANARDIA INDU Series round standalone CHT and EGT indicators are offered for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15"). Respecive sizes of these gauges are 62 x 62 x 45 mm and 82 x 82 x 45 mm. The 57 mm gauges weights 150 g and requires a 102 mA power.

KANARDIA INDU Series round standalone Fuel Pressure, Oil Temperature and Oil Pressure indicators are available for 57 mm (2.25") and 80 mm (3.15") standard panel hole diameters with same sizes and weight power characteristics as those of CHT/EGT gauges.

HONEYWELL BENDIX KING® KA 51B is a slave meter used in the KCS 55A compass system. Displays slaving error between the KMT 112 flux valve and KI 525A pictorial navigation indicator by means of small meter movement. 

FALCON GAUGE Magnetic Compasses are non certified  2" compasses available in liquid (MCDN) and non-liquid (dry) types (MCVC). The Liquid Type compasses provide an accurate reading at a low cost. They are fluid damped and incorporate a thermal expansion chamber and compensating magnet. Available in Panel or Pedestal Mount versions with or without lighting. Different models available: MCDN-2, MCDS-2, MCDN-2L, MCDS-2L. They can be ordered for Northern or Southern Hemisphere.

These compasses are very similar to the Airpath C2300 & C2400 style compasses, but are priced more economically.

The FALCON GAUGE Vertical Card Compasses are of a non-liquid type.  They are designed with a different concept which eliminates the disadvantages experienced with a liquid compass, namely leaking and back and forth motion of the compass card.  These compasses look like directional gyros and offer superior visibility.  A second vertical rotating dial, which is compared with a fixed miniature airplane (lubber line), presents the magnetic heading of the aircraft at all times making heading information more natural.  The easy to read presentation allows the pilot to see the complete 360 degree dial.  They also feature an internal LED light and a universal mounting bracket.

A variety of special headsets, parts and accessories designed for specific aircraft, as well as other military communication applications are included in this listing, They are manufactured by DAVID CLARK CO., INC. and other companies. Other product lines of these manufacturers intended for use in General Aviation, Business/Corporate Aviation, Air Transport airplanes and helicopters as wel as other applications are separately listed. For additional information please consult the Product Description section, the supplied documentation or contact us.

The BOSE A20® Series light weight (12 ounces) Aviation Headsets are engineered to be more comfortable and provide clear audio  with more noise reduction than any other of company headsets featuring in addition customizable audio prioritization control, intuitive “plug-and-play” operation, a high-performance microphone, an optional  Bluetooth audio and communications interface and an optional coil cord. The ergonomic control module includes an auxiliary audio input with intercom/AUX priority switching, ideal for dedicated GPS and traffic warning systems. The BOSE A20®  Series headsets also feature a customizable audio prioritization control with “mute” and “mix” settings, and flexible power circuitry with auto-on that switches to and from battery power and aircraft power. Select models also include Bluetooth connectivity for taking calls or listening to music. The BOSE A20® Series headsets are offered in dual plug, 6-pin plug and U174 plug models and a variety of configurations designed for use in all types of general aviation aircraft, including helicopters (*).

Key Product Features:

- 30% greater active noise reduction than conventional aviation headsets

- 30% less clamping force than conventional aviation headsets

- Automatically shapes and equalizes incoming signals for enhanced clarity and intelligibility

- Bluetooth Connectivity to Bluetooth-enabled devices (Only available for Bluetooth headset versions)

- Customizable audio prioritazation. Choose “mute” to immediately mute an auxiliary audio signal when receiving a communication. Choose “mix” to mix in-bound communication with your Bluetooth or plugged-in audio signal

-  Offered in different headset plugs (GA, U-174, LEMO, XLR-5 depending on the selected model variant)

- Certified to FAA TSO and E/TSO-C139 standards

- Side-Swappable Mic. Connect the mic to either the left or right earcup

- 45+ hour battery life with just two AA batteries

Product includes:

Selected A20® Aviation Headset

In-line clothing clip

Control module

2 AA batteries

Aux-in cable adapter

Carrying case

For additional information please refer to the Product Description section, the supplied documentation or contact us.

(*) Please refer to the Note on Headset Connectors at Product Description.

EASA Certified 10 W Comm Radio with 25 kHz spacing.

UMA Non TSO'd airspeed indicators are offered in 2-1/4" and 3-1/8" Single (MPH) and Dual Range (MPH/Knots) versions for installation on experimental aircraft only. They are housed in Valox 420 plastic cases and weigh 8.6 oz. . Depending on the selected indicator, ranges are in MPH, Knots or kilometers. Some inicators are also offered as certified (FAA TSO'd) units. Standard dial markings are black and white. Optional custom range markings and optional internal lighting(*) are also offered upon request at additional cost. Please indicate the markings option (if markings are required) and lighting option at the time of ordering. 

(*) Note: An inverter is required for the Internal Lighting Option.

KANARDIA INDU Combo IAS/Altitude/Vertical Speed Indicators are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters.They feature an LCD display with possibility to personalise scales and LCD displays. They are offered as standalone (master) or as slave gauges. Slave versions require some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the bus. KANARDIA INDU Combo IAS/Altitude/VSI gauges are available for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15"). Arc colors need to be specified  at the time of order.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Revolution Counters (Tachometers)/HOBBS meters are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from BRP-ROTAX® but also from other manufacturers.  Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

In addition to their panel mounted VHF transceivers, ICOM RADIOCOMMUNICATIONS offers handheld transceivers for aviation & marine applications. Their ICOM A25 series are powerful air band handheld transceivers offered in communications only (A25C) or NAV/COM versions (A25N) with 6 watts of power and an IP57 waterproof rating. They include a large 2350mAh Li-ion battery, providing a long operating time. The easy-to-use interface and large 2.3-inch LCD display combine to provide stress-free programming and in-flight operation. Built-in Bluetooth®, GPS and VOR navigation. ICOM A25 transceivers come with Antenna, Belt Clip, Handstrap, Battery Case, Battery Pack, Headset Adapter, Power Adapter and Battery Charger. ICOM IC-M25 VHF Marine transceiver is a slim depth light weight floating marine radio, floatable into the water with  flash and sound alarms. With its IPX7 waterproof construction, the 700 mW audio output, 11 hours of battery life, buoyancy in water and many other features it can effectively serve a wide range of marine applications. For additional information please consult the Product Description section.

KANARDIA INDU Series round altimeters are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters. They feature colour LCD display, one or two pointers  with possibility to personalise scales (in feet or meters) and LCD displays. They are offered as standalone (master) altimeters with internal pressure sensors or as slave instruments. The slave version requires some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the CAN bus. KANARDIA INDU Series round altimeters are available for two standard panel hole diameters of 57 mm (2.25") with one pointer and 80 mm (3.15") with two pointers. They can also be ordered with integrated backup battery at additional cost. The backup battery can also handle and additional indicator, typically an airspeed indicator.

LONE STAR AVIATION manufactures multiple fans and blowers for OEM applications.

The CYCLONE 100 FAA-PMA approved 1 port blower is the smallest (1 x 2 x2 ), most efficient (brushless dc motor), and the most versatile cooling fan for avionics and or other electronics needing thermal cooling. Its universal mounting bracket makes it easy to set-up and install on on many make and model aircraft and or rotor-craft.  Also installed in Land-Mobile, Marine and Military Vehicles for many PED, radio, GPS applications. Offered in Input 12VDC/24VDC versions.

Lone Star Aviation's new FAA-PMA approved Cyclone 1 port blower is the smallest (1 x 2 x2 ), most efficient (brushless dc motor), and the most versatile cooling fan for avionics and or other electronics needing thermal cooling. Its universal mounting bracket makes it easy to set-up and install on on many make and model aircraft and or rotor-craft.  Also installed in Land-Mobile, Marine and Military Vehicles for many PED, radio, GPS applications. 

The CYCLONE 21 FAA-PMA approved 3 port blower is a compact (3 x 3 x 1") aircraft electronics cooling fan that delivers 21 cubic feet per minute of forced air cooling to a variety of avionics equipment. It is the top FAA approved avionics blower for 14/28 volt aircraft with the smallest footprint and the highest output but also the number one choice for OEM and aftermarket sales world-wide for many make and model aircraft and rotor-craft.

For more information on the above products please consult the Product Description section and the supplied documentation.

The SIRS "Navigator" magnetic compass delivers extremely accurate readings due to its fully integrated, 4 magnet correction facility.  It has the same features as the "Pegasus", but is mounted with a fully adjustable bracket that allows attachment to a variety of positions including the glare-shield or the windshield. This allows the compass to be located away from magnetic influences. Available in different versions for Northern or Southern hemisphere, unlighted  or lighted 12/28V and has a 3-year warranty. Size: 203/8" H x 2-1/4" W. Product accessories such as installation kit, GS1 glareshield mount, SIRS MF1 short foot bracket and SIRS compass correction key are also available and sold separately.