The ORION A600 PG/PR code 4 lighting system by WHELEN AEROSPACE TECHNOLOGIES (WAT) combines a wing tip anti-collision white strobe with forward and tail position conventional navigation lights in one unit which can be used as a replacement for conventional teardrop type navigation lights. Tail position light eliminates the need for a tail mounted position light. 

WHELEN A600 PG/PR incorporates red or green nav light on the forward section, a strobe light with magnifying glass lens in the center and a clear tail position light on the aft portion. Newly developed magnifying strobe lens (A 612) concentrates the maximum xenon light energy in the horizontal plane increasing the light intensity by two to five times. The tail position light on the wingtip gives turning reference to the aircraft behind by displaying angle and white bank while turning. It also eliminates the need for a tail mounted position light which may be omitted when using A600 lighting system. FAA-PMA Approved. Available in 14 or 28 VDC and in a radio-shielded versions. 

Available in 14 or 28 VDC and in a radio-shielded version. The forward position lamp is 26 watts and the taillight lamp is 25 watts.

Product Specifications:

Weight: 0.8 lbs. (363gm)

Position Lamps Power Consumption: 4 amps @ 14 VDC; 2 amps @ 28 VDC 

Exposed Height: 2.4” (61mm) 

Length: 5.63” (143mm) 

Width: 1.7” (43mm) 

This product series is no longer available.  Please refer to model 90340 which is a direct replacement (exact footprint) for the model A600PG/PR without replacing the current strobe power supply. 

The 90340/90375 Series wing tip mounted light systems from WHELEN AEROSPACE TECHNOLOGIES (WAT) combine  strobe anti-collision/LED position lights, eliminating the need for a tail mounted position light. 90375 Series is same as 90340 with the addition of 3 feet of braided bonded protection for use in composite wingtip structure. They can be direct replacements (exact footprint) for the Whelen Model A600PG/PR series without replacing the current strobe power supply. The LEDs in position lights provide a significant reduction in current draw over conventional light bulbs. The strobe light lens assembly is radio shielded for maximum EMI/RFI protection. Single set of flying leads operates both forward & tail nav on 28 VDC version, and one set each of flying leads for the forward & tail nav on the 14 VDC version. FAA TSO'd.

Product Specifications:

LED Navigation Light Power Consumption: 0.5 amps @ 14 VDC, 0.25 amps @ 28 VDC 

Weight: 0.60 lbs. (272gm) 14 VDC, 0.65 lbs. (295gm) 28 VDC 

Exposed Height: 2.70” (69mm) 

LED Colors: Aviation Red, Aviation Green & Aviation White 1.1 lbs. (499gm) 

Lens: Clear RFI coated glass: strobe, Clear Polycarbonate: Navigation Lights

Lightweight, FAA-PMA approved compact power supply unit from WHELEN AEROSPACE TECHNOLOGIES (WAT) for installation in the wingtips and tail of the aircraft, eliminating long runs of high voltage interconnecting cables. Only an 18 gauge low voltage wire supplies power to each power supply and between wingtip mounted power supplies and switch. This system is not synchronized. Flashes 50 times per minute (comet flash).

Product Specifications:

Wt. 1.2 lbs.

Size: 5"L x 3"W x 3.06" H.

Current 1.7A -14V, 0.85A - 28V.

FAA-PMA Approved.

White LED White LED Anti-Collision Head Light Assemblies by WHELEN AEROSPACE TECHNOLOGIES (WAT) consist of the Anti-Collision Light (P/N: 01-0771987-00) and the Flasher Assembly  (P/N: 01-0771985-17) sold separately. They are designed to replace the legacy strobe light (01-0770818-00) and power supply (01-0770006-12 and 01-0770006-17) system on Cessna single engine restart aircraft 1996 & newer. FAA/PMA Approved. When replacing either the 01-0770818-00 strobe assembly or 01-7000617 power supply, both 01-0771985-17 and 01-0771987-00 are needed to convert to LED.

Technical Specifications:

LED Color - Aviation White

Current Draw: 28 Volts 0.3 amps avg. 

Dimensions:  

01-0771987-00 Anti-Collision Light: L 3.17" (81mm) x W 1.42" (6mm) x H 1.18" (30mm) 

01-0771985-17 Flasher Assembly:  L 3.93" (100mm) x W 3.10" (79mm) x H 1.38" (35mm) 

Weight:  

01-0771987-00 Anti-Collision Light: 0.14 pounds

01-0771985-17 Flasher Assembly: 0.48 pounds

LED lighting is the ideal technology for aviation applications. Whelen LED lights are time and field-tested for reliability and long-life performance under the tough conditions required by Fire, Emergency, DOT and Law Enforcement professionals around the world.

PARMETHEUS PLUS PAR36 LED lights by WHELEN AEROSPACE TECHNOLOGIES (WAT) are FAA-PMA Approved LED lights with a convenient “Drop In” design for ease of installation, intended for use as direct replacements for outdated PAR36 Halogen and HID lamps. Power wiring attaches to brass screw terminals. Weight is virtually identical to previous PAR36 lamps. Assembly design includes clocking notch. They are lightweight, low-current and moisture resistant and provide stable light output for thousands of operating hours. The WAT PARMETHEUS PLUS  LED lights have a 40% brighter output than the original PARMETHEUS Series assemblies.

Product Features:

Offered in Landing and Taxi versions

Lightweight

STC-PMA

Direct replacement for outdated PAR36 Halogen and HID lamps

First commercially available PAR36 LED for Aviation applications

10.000 hour operating life

Polycarbonate, replaceable, hard-coated outer lens

Metal, heat dissipating coated housing

Whelen TIR™ (Total Internal Reflector) technology rivals strobe in intensity and effectiveness

Designed and manufactured in the USA.

Five year warranty

Master Relay (Battery Solenoid) for all homebuilts (not suitable for certified aircraft). Continuous duty. Offered for 12V and 24V systems.

YAESU rechargable batteries are intended for use with YAESU handheld transceivers.

ZEFTRONICS Voltage Regulator with ground fault protection, trouble shooting light, black plastic connector & 16V over voltage protection built in.