The ICOM IC-A210 Series of VHF 760 COMM transceivers operating in 118-136.975MHz range are offered as non certified radios. Featured with OLED displays,"flip-flop" arrow button switches between main and stand-by channels, GPS memory function, a built-in DC-DC converter accepting 12/24VDC power source, a built-in voice activated intercom allowing pilot-copilot communication via the headset and two types of rear-panel adapters included for streamlined plug-in connectivity, ICOM A210 series transceivers are a meaningful choice for radio upgrades and replacecements as they are interchangeable with IC-A200, KY96A/KY97A & SL40 radios. IC-A210E is compatible with 8.33kHz channel spacing in addition to the widely used 25kHz. For a certfied model please refer to the  TSO/ETSO certified IC-A220T.

The GARMIN® GTX™ 345 looks and operates like a standard Mode S transponder. It is a panel-mounted  IFR-certified all-in-one transponder solution for compliance with 1090 MHz ADS-B "Out" and "In" requirements with minimal expense, downtime and disruption to the aircraft panels while providing at the same time all the weather and traffic benefits of ADS-B “In”. An easy replacement for existing transponders with common 1.65-inch tall form factor, FAA and EASA approved for installation on most popular aircraft makes and models. It features a bright, sunlight-readable digital display, a pressure altitude readout, handy timers for approaches and other operations, plus dedicated pushbuttons for quick and easy squawk code entry. Its 1090 MHz ADS-B "Out" transmission capability enables automatical output of accurate and dynamic traffic surveillance data that the NextGen airspace system requires. Its ADS-B "In" reception unlocks even more capabilities for pilots, enabling display of ADS-B traffic, weather and more on a variety of installed or portable displays. Traffic monitoring requirements of ADS-B can be satisfied by either a WAAS/SBAS-compliant navigation system or an optional built-in GPS position source available with your GTX 345 transponder.

Optional remote mount GTX versions are also available for compatibility with the GTN™ 750/650 series of GPS/Comm/Nav systems, as well as select Garmin G1000® integrated flight deck systems – all of which provide built-in remote transponder code selection and control.

With the GTX™ 345, the subscription-free weather and traffic display capabilities enabled by ADS-B "In" can be interfaced with compatible cockpit displays or streamed wirelessly via Garmin Connext™ to aera 796/795 or 660 series portables, as well as to popular tablets/mobile devices by way of apps such as Garmin Pilot™, or ForeFlight Mobile. 

The GTX™ 345 ADS-B dual-link receiver can receive on both frequencies (978 MHz and 1090 MHz) authorized for ADS-B operations in the U.S. ADS-B traffic and active traffic targets are merged on the display providing a truly comprehensive traffic picture. For added situational awareness, it also incorporates a built-in audio output for audible traffic and altitude alerts, which can be integrated into the existing audio panel. 

The GTX™ 335/345 transponders can only be sold for use in experimental aircraft. Their use in certified aircraft requires their installation from a shop certified by Garmin to perform installations.

LORD Corporation AM Series Low Profile Avionics Mounts (also referred to as isolators)) set the standard for compact, highload, high-capacity isolators. They are designed to support and protect avionics equipment in all types of aircraft. Inertial guidance and navigation systems and radar components are examples of applications where these mounts are used. In addition, AM Series mounts are used to isolate engine/aircraft accessories such as fuel controls, pressure sensors and oil coolers. These mounts  are tested and approved to the environmental tests appearing in MIL-STD-810 or MIL-E-5400. They may be used in a temperature range of -65°F to +300°F (-54°C to +149°C) for BTR® Silicone and -40°F to +300°F (-40°C to +149°C) for BTR® II Silicone. They are made with specially compounded silicone elastomers which exhibit excellent resonant control evidenced by the low transmissibility at resonance. These designs also provide linear deflection characteristics.

LORD Corporation AM Series vibration isolators are offered in different sizes and capacities. Please refer to the attached documentation.

The 730/830 Engine Monitoring Systems (EDM) from JP INSTRUMENTS revolutionize engine monitoring by the compact size integration of a full color graphical LCD display with the extremely popular EDM 700/800 series functionally. Both 730 and 830 EDMs feature: colourful graphics, larger data display for easy reading, parameters in full colour, annunciation of exceedances, less page swapping, more data per page. The units are "Plug and Play" compatible with existing EDM-700/800 units. Oil pressure has also been added to the entire EDM series line.  Both 730 and 830 are FAA approved for use as secondary engine monitors. However they CANNOT BE USED as a replacement for primary gauges which have to be maintained. Different options and accessories are also available at additional cost.

Installation parts and accessories used in different GARMIN® GMA Audio Control Panels are offered, including connector kits, mounting trays, back plates, audio and USB cables and others. Parts and accessories come with a Certificate for Conformance as standard. For parts used in GARMIN® GMA certified Audio Control Panels, these can be accompanied by FAA Export 8130-3  Forms at additional cost whenever required. Please specify the needed certification at the time of ordering.

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality.

FALCON GAUGE Non Certified Airspeed Indicators have been one of the most chosen flight instruments by fixed wing airplanes, helicopters and ultralights. The great advantages of these gauges are excellent slow speed characteristics, very progressive increments, a variety of ranges, light weight, short length, and affordable price. FALCON GAUGE Airspeed Indicators ranging up to 80 MPH, 100 MPH, 120 MPH and 150 MPH make for excellent MPH increments for helicopters and ultralight aircraft. All FALCON GAUGE Airspeed Indicators are housed in an aluminum case and consist of all metal parts. They come in 2-1/4" and 3-1/8" sizes. Available ranges: MPH, Knots, KPH; single range or dual range readings. Optional: Custom color range markings can be special ordered. For additional information please refer to the supplied documentation or contact us.

R.A. MILLER INDUSTRIES (RAMI) aircraft antennas cover a wide range of functions including communications, NAV antennas, GPS, ADS-B, transponder, VOR localizer, glide slope antennas, and marker beacons. They are known for their streamlined aesthetics, quality, and reliable performance. Offered in different TSO models, RAMI wire whip and rod antennas ELT (Emergency Locator Transmitter) devices are intended for use on low-speed General Aviation aircraft. 

RAMI AV-100 FAA TSO C126a Airborne ELT Antenna is a passive two frequency (121.5 & 406 MHz) whip antenna, designed for speeds up to 250 knots. Impedance 50 Ohms Nominal, VSWR (Maximum):121.5 MHz 2.0:1 / 406 MHz 1.5:1, Polarization Vertical, Pattern Omni-Directional, Connector BNC Female, Weight: 3 oz. Maximum, Color: Black.

RAMI AV-200 FAA TSO C126a Airborne ELT Antenna is a passive two frequency (121.5 & 406 MHz) whip antenna, designed for speeds up to 250 knots. It meets DO-160G, Section 8, Category U requirements for robust vibration and is qualified for installation on helicopters with unknown related rotor frequencies. Impedance 50 Ohms Nominal, VSWR (Maximum):121.5 MHz 2.0:1 / 406 MHz 1.5:1, Polarization Vertical, Pattern Omni-Directional, RF Power Capacity 10 Watts CW, Connector BNC Female, Weight: 0.19 lbs. Maximum, Max Height 24″.

RAMI AV-300 FAA TSO Airborne ELT Antenna is a passive three frequency (121.5, 243 & 406 MHz) fiberglass rod antenna, designed for speeds up to 350 knots. Impedance 50 Ohms Nominal, VSWR: 2.0:1 max at 121.5 MHz,2.0:1 max at 243 MHz, 1.5:1 max. at 406 MHz,  Polarization Vertical, Pattern Omni-Directional, RF Power Capacity 10 Watts CW, Connector BNC Female, Max Weight 9 oz, Max Height 14″.

The STRATOMASTER VEGA range instruments/indicators from MGL AVIONICS includes different 2 1/4" (57mm) microprocessor based color display instruments operating over a wide supply voltage range of 8 to 30V DC with with built in reverse and over voltage protection. They are non certified and only suitable for installation in experimental and sport  (LSA) aircraft. Using a high resolution color graphics display, these instruments/indicators provide excellent daylight readability with built in backlighting making them easy to read at night time. They include a rotary control plus 2 independent keys for easy menu navigation and to access specific instrument features. Sensors are also offered to enhance their functionality. The MGL AVIONICS STRATOMASTER VEGA Series instruments/Indicators include: Artificial Horizon & Magnetic Compass Display, Altimeter/VSI, ASI, ASI/VSI, Engine Monitoring System (EMS), Fuel Computer, Information Display, Manifold Pressure, Température, RPM, Hobbs, Universal Engine/Rotor RPM, Hobbs, 4-Channel Thermocouple (EGT/CHT), 4 Channel Universal Analog Input (Pressure/Temperature/Voltage/Current) and NAVCOM Control head for MGL N16 NAV/COMM or V16 COMM VHF.

DUKANE SEACOM, wholly-owned subsidiary of HEICO Corporation, is the world’s leading supplier of FAA / EASA  & BSH qualified (Certified) high-impact underwater acoustic beacons for  the commercial air transport, business and regional jets, as well as fixed and rotary wing commercial and military markets. Other products in DUKANE SEACOM range include marine underwater beacons for Voyage Data Recorder (VDR) applications and Emergency Locator Transmitters (ELT) separately listed.

The DK120/90 was the first ULB certified to provide a minimum of 90-day underwater operating life. Certified to TSO-C121b & TSO-C142a and ESO ETSO-C121b & ETSO-C142a. Airframe mounted DK180 series low frequency beacon is designed and qualified to meet the newly developed standards FAA TSO-C200 / ETSO-C200 dated 6/26/2012 as per SAE–AS6254 & ARINC 667. For applications not requiring compliance to the 90-day operating requirement, the DUKANE SEACOM DK120/90 and DK140 (short) are still available.  An overview of DUKANE SEACOM Aviation  Underwater Location Beacons is provided in the Product Description Section.

GARMIN® GA 35 GPS WAAS is a FAA TSO'd antenna suitable for use with Garmin GPS devices like the GTN 650 GPS/NAV/COMM/MFD. Antenna connection is female TNC out. For installation of this GPS antenna the use of  RG 400 or RG 142  and a male RG400/142 TNC connector is recommended. The mounting plate for this antenna is sold separately.

TSO'd Electronic Fuel Quantity gauges from UMA INSTRUMENTS (indicated by the letter "T" in the PN) are offered in 1-1/4 in. and 2-1/4 in. sizes for installation in respective panel hole diameters and mounted with (4) 6-32 screws. Smaller 1-1/4 in. instruments can be cluster mounted as close as 11/2” centers utilizing panel space without compromising readability. They can be powered from 14 or 28 volts. Signals are acquired from remote mounted sensors, processed and displayed on black analog dials with white easy to read markings indicating empty to full fuel level. Each gauge uses rugged aircore meter movement for vibration resistance and repeatability. Available in different versions based on their sender type and range. UMA sensors are sold separately.

Manufactured with high quality PC/ABS, the AERA 660 Panel Dock by AIRGIZMOS, maximizes its use by placing the GPS right in the aircraft  panel and hold securely in place without blocking any other instruments.  It makes GPS touch screen controls easier to navigate and matches the look and feel of the rest of the avionics stack, resulting in a pleasant, professional looking panel. Dimensions are 6.25" wide by 4.25" high.

Garmin has reduced the number of connectors on the AERA 660  by using a docking connector. This docking connector has been integrated in the design and nests into the back of AIRGIZMOS Panel Dock. For upgrades from an older Garmin GPS, this panel dock has been designed to fit the same opening as those for AERA 496 or 500 and uses the same hole layout for mounting.

The GARMIN® GTR series COMM TSO'd panel mounted transceivers together with the GARMIN® GNC series NAV/COMM radios (please see separate presentation) are replacement products for the popular SL30 and SL40 models. They include new features to reduce pilot workload, while also offering an affordable solution to meet the requirements of the 8.33 kHz channel spacing European Union mandate under the Single European Sky (SES) initiative. They are more powerful than their SL-series predecessors with 10- or 16-Watt transmit power  available versions. They are offered as units only or as kits with a 4ft harness to AUDIO Panel.  If purchased with the 4ft harness, they can only be used  in experimental aircraft.

EASA Certified VHF transceiver in 160mm format with 6W output power. Automatic selection of 8.33kHz/25kHz spacing and OLED display.

The PS ENGINEERING PMA7000 series of TSO'd audio panels offer a very affordable upgrade for existing BENDIX KING KMA24 units while providing a a great set of capabilities. The PMA7000B with built in Marker Beacon is KMA24 pin compatible. Existing wiring to the KMA24 can be maintained making the cost of the upgrading less expensive. In addition, it is plug and play with the original PMA7000M-S, the PMA6000M-S, and the KMA28 audio panels. PMA7000 series audio panels feature  6-place IntelliVox® automatic Voice Operated Relay (VOX) hi-fi stereo intercom system with Soft Mute™. The PMA7000B provide 3-com capability with the option to easily convert Com 3 to a full duplex cellular telephone interface  and "Split Mode" allowing the pilot to be on Com 1 while the copilot is on Com 2.

Product Features (depending on model selected):

IntelliVox® automatic VOX system with individually gated microphones

6 - Place hi-fi stereo intercom with Soft Mute™

Bluetooth(R) Interface (Model PMA7000BT) allowing music streaming as well as interconnect to an iPhone, iPad, iPod, or any other Bluetooth(R) enabled device that has the Handsfree or A2DP profile.

2 - music mute modes: Mute On and Mute Off

Built-in Marker Beacon Receiver

Cellular telephone input with dedicated On/Off hook switches for unprecedented flexibility

Split mode for dual audio panel capability

2 Hi-fidelity stereo music source inputs

3 - Isolation modes - Pilot Isolate, All, and Crew

4 - Unswitched inputs

Selectable music muting for passengers

Selectable special intercom mode with ""Alternate Intercom Mode""

RAM (Radio Active Mute) eliminates constant back ground noise from radio static

The only knob that is on the panel is a concentric volume control for the Crew and Passengers intercom volume. The all push button controls of the PMA7000B allows for easy selection of Coms and other Nav aids.

Certification: FAA Export 8130-3

Warranty: 24 months

KANARDIA INDU Combo IAS/Altitude/Vertical Speed Indicators are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters.They feature an LCD display with possibility to personalise scales and LCD displays. They are offered as standalone (master) or as slave gauges. Slave versions require some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the bus. KANARDIA INDU Combo IAS/Altitude/VSI gauges are available for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15"). Arc colors need to be specified  at the time of order.

The DIALIGHT 800/801-series MS25041 are high-quality Miniature press-to-test indicators with built-in bulb testing device and an adjustable dimmer (801 series). They use T 1 3/4 bulbs with midget flange base such as GE-330 (12V) or GE-327 (24V) bulbs but LED replacement bulbs can also be used (*). 

With their sleek design and easy installation, and their availability in different vibrant colors they are  the perfect accessories for providing a stunning, uniform glow and enhancing the appearance and functionality of indicators in the panel.

Crafted with durability in mind and made from top-grade materials for excellent protection against weather elements and long-lasting performance,  both 800 and 801 series indicators feature a T-1 3/4 midget flange for 15/32" mounting hole with solder termination, black anodized mounting bushing, aluminum mounting and flange nuts hardware. The push-to-test marking is die-stamped and filled on all lens cap assemblies used with 3 terminal units. They are is compatible with various LED bulb models and ensure a secure and precise fit. Bulbs are NOT INCLUDED. They can be ordered separately.

(*) PNs 800-1030-0337-504, 800-1030-0331-504, and 800-1030-0333-504 of  DIALIGHT 800 Series and PNs 801-1030-0337-504, 801-1030-0331-504, and 801-1030-0333-504 of DIALIGHT 801 Series and PTT indicators can be used with Based LED Replacement Lamps.

TSO'd Electronic Fuel Quantity gauges from UMA INSTRUMENTS (indicated by the letter "T" in the PN) are offered in 1-1/4 in. and 2-1/4 in. sizes for installation in respective panel hole diameters and mounted with (4) 6-32 screws. Smaller 1-1/4 in. instruments can be cluster mounted as close as 11/2” centers utilizing panel space without compromising readability. They can be powered from 14 or 28 volts. Signals are acquired from remote mounted sensors, processed and displayed on black analog dials with white easy to read markings indicating empty to full fuel level. Each gauge uses rugged aircore meter movement for vibration resistance and repeatability. Available in different versions based on their sender type and range. UMA sensors are sold separately.

The Ameri-king AK-920F is a FAA TSOd approved GPS/Avionics fan, compact sized, delivers up to 26.6 CFM cubic feet per minute of forced air cooling to a variety of avionics equipment. It features ball bearing for highest reliability and long lasting. The AK-950F fan may be behind or beneath aircraft instrument panel or avionics equipment rack or cabin pressure bulkhead.

Product Features:

Power reverse polarity protection

Compact size

Choice of 1, 2, 3, or 5 hose outputs

Universal mounting

Hoses-Connector kit and hardware (included)

4-year extended warranty

Power: 14 or 28 VDC

UMA NON TSO'd mechanical manifold pressure gauges (MPGs) are offered in two series, the conventional 2-1/4" manifold lightweight  gauges with a slim design and a single diaphragm and the newer 3-1/8" and 2-1/4" gauges which incorporate a dual diaphragm design improving the longevity and reliability of the instrument. Standard markings are black and white while optional color markings can be ordered. Cases are from cast aluminum or Valox 420 plastic depending on model selected.