Aviation Fire Extinguishers by H3R Aviation, Inc. include Halon, Halotron 1, Halotron BrX and wheeled  fire extinguishers. They come in different models with varying agent weights & technical characteristics to meet application requirements.

H3R RT Series Liquefied Gas Portable Extinguishers are popular general aviation fire extinguishers, and standard equipment on many light aircraft due to their light weight,  low maintenance and a 12 year shelf life. They contain a unique blend of liquefied gas 1211/1301, two highly effective fire fighting agents. These units are self expelling which means that the pressure remains constant even when the extinguishers are almost empty. They are available in different models with respective charge weights in lbs.

H3R A344T Halon 1211 Aircraft Fire Extinguisher is the company's smallest fire extinguisher with a gauge, similar in size but heavier than the Halon blend model RT A600. Recommended for a 1-4 person aircraft, including the pilot. 

H3R C352TS and C354TS models of Halon 1211 fire extinguishers can be used for cockpit/cabin and is found on a wide variety of commercial and general aviation aircraft, from Boeings to Cessnas. C352TS fire extinguisher is of same size tand uses the same mounting bracket with C354TS model except that the C354TS  fire extinguisher carries twenty percent more Halon 1211 than C352TS.

H3R  Halotron 1 series of fire extinguishers use Halotron® 1 the most widely tested and accepted Halon 1211-alternative agent for streaming applications. Just like Halon 1211, Halotron® 1 expels as a rapidly evaporating liquid and leaves no residue.

H3R Halotron BrX series of fire extinguishers have been designed as replacements for their Halon 1211 counterparts, addressing environmental regulations. They use Halotron BrX clean agent, feature a lightweight design and are effective for Class B and C fires. 

H3R Halotron BrX series are non-rechargeable and have a 12-year service life. They carry ICAO, UL, ISO, EN, EASA, and FAA approvals for use as Halon 1211 alternative fire extinguishers on private and commercial aircraft. 

Fire extinguishers  are considered Hazardous Materials (HAZMAT) and must comply with respective packaging & certification requirements.

For more information on H3R fire extinguishers please consult the Product Description section. 

BROWNELL LIMITED provides a comprehensive range of products for preventing the problems caused by condensation, humidity and over pressure. The company's product portfolio includes desiccant bags, desiccators, humidity indicators, pressure relief valves and gas purging systems for applications in all of today's industrial sectors. For additional information please refer to the supplied documentation.

AVIATIONEU NEW ERA product line of fire extinguishers includes both portable (with a total mass of 5-20 kg) and mobile extinguishers of over 35 kg, moved by a trolley. They come in different sizes and types including:

- Powder multi-purpose fire extinguishers suitable for A, B and C fire classes,

- Carbon Dioxide fire extinguishers (CO2), one of the cleanest types of extinguishers,mainly intended for use on class B fires,

- Water mist extinguishers for use on classes A, B and C fires as well as K (cooking) fires,

- Wet Chemical extinguishers mostly used on  class K fires.

- Foam fire extinguishers suitable for class A and the flammable liquids of class B, though not effective for gaseous fires. 

- Clean Agent fire extinguishers which are gaseous fire suppression type. The gas in the extinguisher (often a BCF, such as Halon 1211/Freon 12B1) is stored in liquid form but  converts to gas form when released in the air. Halon 1211/1301 extinguishers  are widely used in Aviaton.

Product Features:

-competitively priced,

-simplicity in operation and maintenance,

-fast actuation and convenience in work,

-environmental friendly (depending on extinguisher type)

-long service life (up to 10 years depending on extinguisher type)

LOWARA e-SV™ Series Stainless Steel Vertical Multistage Pumps

The LOWARA e-SV™ range  of vertical multistage pumps are highly reliable and technologically advanced multipurpose pumps and includes models in eleven sizes  with 1-3-5-10-15-22-33-46-66-92-125 m³/h nominal capacities.

All pumps ≥ 1.5kW are equipped with IE3 standard motors.

Design features:

Balanced mechanical seal replaceable with-out need for pump disassembling (for 10-15-22SV>=5,5kW, 33-46-66-92-125SV)

“O” Ring seat design to allow for simple outer sleeve dis-assembly

Floating for self alignment replaceable diffuser wear ring (PPS Glass filled technopolymer to withstand chemically corrosive, mechanically aggressive and high temperature liquids)

Reduced impeller axial thrust for longer standard motor bearing life (17,500h)

Hard Material Intermediate bush bearing (Tungsten Carbide/Silicon Carbide) to improve life and ability to withstand heavy duty applications, like boiler feeding

High temperature seal option (180°C max) with low NPSH design, high pressure design (up to 40 Bar), and passivated & electro-polished versions are available upon request.

0.37 - 18.5kw

Single or 3 phase

2 Year Warranty

Further unique features of the e-SV™ pumps include the integration of performance diagnostic devices such as the i-Alert™ vibration monitor and Dry Run sensor. The  i-Alert™ and the Dry Run sensor are available as an accessory for all models.

The e-SV™ pumps are certified by WRAS, ACS and D.M. 174 for use with potable water.

LOWARA e-SV™ Series Pump Versions:

e-SV: standard pump with IE3 motor

e-SVE: Variable speed Smart Pump with ultra premium efficiency IES2 drive package including a permanent magnet IE5 motor (up to 1,5 kW)

e-SVH: Variable speed pump with Hydrovar® pump controller (up to 22 kW)

For additional information please consult the Product Description section and the supplied documentation.