Tempest® Spin EZ® FAA PMA approved aviation oil filters are manufactured by Aero Accessories®, LLC. Apart Spin-EZ® gasket oil filters the company also manufactures other pneumatic products such as Tornado™ dry air pump.

Product Features:

Improved Nut Welds – Nut welds are so strong that the can will distort without breaking the welds.Tempest Original filters can be installed without the danger of installation nuts falling off.

Improved By-Pass Valve for Continental® Engines – Meets TCM by-pass specification of 12-14 psi, reducing risk of premature bypass that can result in unfiltered oil flowing to your engine.

PC Housing (Patent Pending) – the only filter to incorporate a housing for the by-pass valve to prevent the restriction of the oil outlet should a failure of the by-pass valve occur.

Burst strength of 600 psi – Significant improvements to the roll seam process used on the bottom of the can substantially improved the design burst strength of the Tempest Spin EZ oil filter to over 600 pounds per square inch, exceeding the ARP 1400 standard by 50 percent. Extra strength gives added assurance that Tempest oil filters are made to withstand the harshest operating conditions.

Full Pleat Media – The resin-impregnated, cellulosic, full pleat media is designed for uniform flow and collapse resistance.  312 square inches is the most in aviation oil filters.

Tempest® Spin EZ® oil filters are sold individualy but also offered as economical, convenient, and easy to handle six and twelve packs. Spin EZ® Solid Lubricant, aTempest Spin EZ oil filter’s proprietary solid lubricant is also available allowing for easy removal of the filter. Unlike oil, grease or DC4 compound that leave the filter seemingly “bonded” to the engines mount pad, making it nearly impossible to remove, Tempest® Spin EZ solid lubricant won't extrude or squirt out from under the seal.

PLease consult the supplied documentation for additional information.

TEMPEST®, a TEMPEST AΕΡΟ GROUP™ affiliate, offers their Platinum Electronic Fluid Pump line with a range of electronic fuel pumps designed to replace many of the FACET® GOLD-FLO solid state fuel pumps. FAA/PMA certified, TEMPEST® operate in 14 to 28 volt systems of modern aircraft and use an internal high-flow filter element that can be easily replaced when specified by aircraft maintenance manuals. Use of TEMPEST® Platinum Electronic Fluid Pumps in most Cessna aircraft requires installation of tank modification SK421-26C service kit separately priced.

The pump filter element must be changed when specified by the aircraft maintenance manual or when the pump output/pressure diminishes (an event that may indicate a dirty clogged filter). A universal Filter Kit  P/N KIT-P1 is offered which fits all Aero Accessories Platinum Pumps and includes filter P/N 79729, gasket P/N 79136 & O-ring P/N 79139-2.

For additional information please refer to the supplied documentation.