Miscellaneous Aerospace & Milspec bearings by various manufacturers specified by either their Part Number, US National Stock Number / NATO Stock Number (NSN) (*) or both. Listed bearings are supplied in New Condition or other Condition as specified for the respective item. Listed products are NCNR Non-cancellable/non-returnable upon order placement. Any inventories of our co-operating suppliers are always subject to prior sale. 

(*) The National Stock Number or NSN is a 13-digit stock number used by U.S Federal agencies, including the DOD to buy and manage supplies of repeatedly procured, stocked, stored, issued, and used items. It consists of the four-digit Federal Supply Classification (FSC) and the nine-digit National Item Identification Number (NIIN). The NIIN consists of a two-digit National Codification Bureau (NCB) number followed by a seven-digit item number. This number is also used by the North Atlantic Treaty Organization (NATO) and the international community as both NSN and NATO Stock Number are interchangeable terms for the same codification system.

Supply of listed bearings may require compliance with the International Traffic in Arms Regulations (ITAR) which control the export and import of defense-related articles and services on the United States Munitions List (USML). According to the U.S. Government, all manufacturers, exporters, and brokers of defense articles, defense services, or related technical data must be ITAR compliant.

The MS27643/AS27643 series airframe control bearings are offered by various manufacturers. They are  double row, ball, self-aligning, heavy duty bearings produced in accordance with AS7949 specification.

Depending on the manufacturer, rings and balls of these bearings are produced from premium quality AISI 52100 chrome steel or CRES 440C materials.  External surfaces (except bore, caps, and seals) are cadmium plated per AMS-QQ-P-416 or zinc nickel plated per OEM specifications. They include PTFE seals, CRES sealcaps and they are prelubricated. They are offered in different sizes but custom sizes, materials, tolerances, radial internal clearances, lubrication, plating, etc., can also be offered upon request.

Operating temperature range: -65 to +250 °F.

AS81820 Standard bearings are Plain Self-Aligning, Self-Lubricating ,Low Speed bearings with a -65 TO +325 °F temperature operating range offered in different specifications with those of SAE AS Standard superseding the Military Standard  respective parts.  AS81820 Standard bearings include AS14101/MS14101 narrow, grooved race, AS14102/MS14102 wide, chamfered race, AS14103/MS14103 wide, grooved race, and AS14104/MS14104 narrow, chamfered race.

SAE-AS14102 and SAE-AS14103 (included in this presentation) supersede those of MS14102 and MS14103 specifications. They are both are wide plain spherical bearings, self lubricating self aligning, and low speed, designed for operation in high temperature environments  (-65°F to +325°F  or -53.9°C to +162.8°C). Their inner and outer rings are made from Corrosion Resistant Steel (CRES). AS14102/MS14102 series bearings come with a chamfered outer ring while those of AS14103/MS14103 series come with a grooved outer ring. They are offered as either OEM parts from RBC® BEARINGS or as part of our own label (AVIATIONEU NEW ERA) product lines sourced from quality manufacturers. 

Narow Series AS14101/MS14101 and AS14104/MS14104 bearings (separately listed) are offered as OEM parts by different manufacturers including RBC® BEARINGS, NEW HAMPSHIRE BALL BEARINGS® (NHBB), AURORA BEARING COMPANY® and others as well as their replacements by NATIONAL PRECISION BEARING® (NPB).

For additional information and specifications please refer to the supplied documentation.

The HEIM® BEARINGS company has been acquired by RBC® BEARINGS, a leader in the world of highly engineered bearing products. 

HEIM® BEARINGS produces the industry's widest range of rod end bearing sizes (aka rod ends) in  the following four grades (types): precision, aircraft, military and commercial with each grade including different series suitable for respective application requirements. HEIM® BEARINGS are made from different materials featuring among others high strength two piece designs, high capacity designs, self-lubricating options and thermoplastic races or Teflon® liners. Please consult the supplied table on different grades and series offered.

- Precision rod ends are manufactured to tight tolerances for applications requiring improved linkage accuracy and reduced looseness. 

- Aircraft rod ends use premium materials, and have magnafluxed rod end bodies. Originally intended for aircraft applications, aircraft rod ends are used in many industrial applications where a high degree of reliability is required

- Military rod ends are produced in strict accordance with all applicable military specifications and are typically used in military and commercial aviation applications, or when Mil-Spec approval is required

- Commercial rod ends are produced using standard materials and manufacturing methods, and consist an economical choice for industrial applications

Series BHM, HFX G and HMX G four piece precision extra capacity rod ends are the high strength series intended for more heavily loaded, static and dynamic industrial applications. These rod ends have 4130 or 4340 alloy steel, heat treated bodies for increased strength and aluminum bronze race inserts for high bearing capacity. The rod end bodies are protective coated for corrosion resistance and the balls are chrome plated for superior wear and corrosion resistance. Series BHM (male) and series HFX G (female) have common thread sizes. Series HMX G (male) have oversized shanks for additional shank strength.

The letter "G" indicates Zerk Lubricator (standard on HFX G/HMX G Series). The letter “L” to prefix indicates Left Hand thread.

Please refer to the supplied chart for technical specifications and the RBC® HEIM® Bearings Catalog for additional information.

TIMKEN® lock nuts and respective lock washers are used in the mounting of straight bore bearings on shafts. They are available for bearings in the various series. Their dimensions relate to the bearing bore sizes.

RBC Aerospace Bearings offers the industry’s widest selection of rod end type bearings (also known as the Heim rod ends or joints) in inch and metric sizes with a variety of platings, coatings and materials and a range of optional features such as lubrication fittings, left hand threads and keyway slots. RBC product range of Heim rod ends are offered with brass race inserts in standard, precision and high capacity designs, high strength two piece designs, self-lubricating rod ends with engineered thermoplastic races or high performance Teflon® liners, military standard (AS81935) ME/FE rod end series, ball bearing rod ends with extremely low friction and misalignment capability and elastomeric bearing rod ends that reduce vibration and noise in installations. Please refer to the attached documentation for additional information.

M81935/1 ME Series Product Features:

Wide, High Capacity Series

External Threads

Alloy Steel, Self-Lubricated

Low cost Chinese origin bearings for industrial applications from various manufacturers.  Marketed and sold by UXCELL Factory-Direct e-Commerce platform and other resellers.

The HEIM® BEARINGS company has been acquired by RBC® BEARINGS, a leader in the world of highly engineered bearing products. 

HEIM® BEARINGS produces the industry's widest range of rod end bearing sizes (aka rod ends) in the following four grades (types): precision, aircraft, military and commercial with each grade including different series suitable for respective application requirements. HEIM® BEARINGS are made from different materials featuring among others high strength two piece designs, high capacity designs, self-lubricating options and thermoplastic races or Teflon® liners. Please consult the supplied table on different grades and series offered.

- Precision rod ends are manufactured to tight tolerances for applications requiring improved linkage accuracy and reduced looseness. 

- Aircraft rod ends use premium materials, and have magnafluxed rod end bodies. Originally intended for aircraft applications, aircraft rod ends are used in many industrial applications where a high degree of reliability is required

- Military rod ends are produced in strict accordance with all applicable military specifications and are typically used in military and commercial aviation applications, or when Mil-Spec approval is required

- Commercial rod ends are produced using standard materials and manufacturing methods, and consist an economical choice for industrial applications

The HEIM® BEARINGS HM M/HF M Series aircraft rod ends, male and female threaded respecively,have rod end bodies made from aircraft quality carbon steel and magnafluxed for a high degree of assurance of rod end integrity. Balls  are made from 52100 alloy steel, heat treated and chrome plated on brass race inserts. These series were originally intended for general aviation applications and is also used in many industrial applications where rod end reliability is critical.

Letter “L” in the prefix indicates Left Hand thread

Please refer to the supplied chart for technical specifications and the RBC® HEIM® Bearings Catalog for additional information.

RBC SAE-AS7949 MS27646 B500DD Series Airframe Control Extra Light Torque Tube Ball Bearings are single row, self-aligning, extra light duty ball bearings with PTFE seals and cadmium plated exposed surfaces except bore, caps, and seals. This series is dimensionally interchangeable with the unsealed B500 series. MS27646 B500DD Series bearings are prelubricated for life and are also offered with CRES 440C material and/or zinc nickel plating per OEM specifications. Please refer to the attached reference chart.

TIMKEN® lock nuts and respective lock washers are used in the mounting of straight bore bearings on shafts. They are available for bearings in the various series. Their dimensions relate to the bearing bore sizes.

In 1971 AURORA BEARING COMPANY entered the rod end and spherical bearing market and soon became a major force in the rod end industry. The AURORA BEARING product potfolio today includes both Aerospace / Military and Commercial / Industrial rod ends and standard spherical bearings in inch and metric systems while special bearings can be designed and manufactured on request. Different series of these bearings are separately presented together with respective documentation.

AURORA BEARING MM & MB Series include Precision General Purpose Male Rod Ends with the following features. Rod ends in these series are equivalent to RBC® HEIM® BEARINGS part numbers shown in the parenthesis.

Body - Low carbon steel, protective coated for corrosion resistance. Size 16 standard series body is alloy steel not heat treated.

Ball - Alloy steel, heat treated, hard chrome plated.

Race - Low carbon steel, protective coated for corrosion resistance.

Grease Fitting -  supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: MM-6Z = Zerk Type Fitting MM-6F = Flush Type Fitting.

Load ratings apply only to rod ends without grease fittings.

PTFE Liners available upon request. Specify by adding suffix "T". Ex.: MM-6T.

Bellcrank bearings are commonly used for various control bellcranks throughout many experimental aircraft. They are prepacked with lubricant conforming to Mil. -G23827, inspected per Mil. I 45208A and 100% traceable. Operating temperature range -30 Deg. F to +250 Deg. F

The RBC range of angular contact ball bearings have a contact angle so that they can sustain significant axial loads in one direction together with radial loads. A-Type thin section bearings are manufactured from 

52100 Steel and feature a large diameter, light weight, a small cross section and a circular pocket ball separator. They are available in the following series with different cross section sizes, dimensions and load ratings. Please refer to the specifications table for additional information.

Series KAA - Cross Section Size: 3/16"

Series KA - Cross Section Size: 1/4"

Series KB - Cross Section Size: 5/16"

Series KC - Cross Section Size: 3/8"

Series KD - Cross Section Size: 1/2"

Series KF - Cross Section Size: 3/4"

Series KG - Cross Section Size: 1"

The HEIM® BEARINGS company has been acquired by RBC® BEARINGS, a leader in the world of highly engineered bearing products. 

HEIM® BEARINGS produces the industry's widest range of rod end bearing sizes (aka rod ends) in  the following four grades (types): precision, aircraft, military and commercial with each grade including different series suitable for respective application requirements. HEIM® BEARINGS are made from different materials featuring among others high strength two piece designs, high capacity designs, self-lubricating options and thermoplastic races or Teflon® liners. Please consult the supplied table on different grades and series offered.

- Precision rod ends are manufactured to tight tolerances for applications requiring improved linkage accuracy and reduced looseness. 

- Aircraft rod ends use premium materials, and have magnafluxed rod end bodies. Originally intended for aircraft applications, aircraft rod ends are used in many industrial applications where a high degree of reliability is required

- Military rod ends are produced in strict accordance with all applicable military specifications and are typically used in military and commercial aviation applications, or when Mil-Spec approval is required

- Commercial rod ends are produced using standard materials and manufacturing methods, and consist an economical choice for industrial applications

Series BHM, HFX G and HMX G four piece precision extra capacity rod ends are the high strength series intended for more heavily loaded, static and dynamic industrial applications. These rod ends have 4130 or 4340 alloy steel, heat treated bodies for increased strength and aluminum bronze race inserts for high bearing capacity. The rod end bodies are protective coated for corrosion resistance and the balls are chrome plated for superior wear and corrosion resistance. Series BHM (male) and series HFX G (female) have common thread sizes. Series HMX G (male) have oversized shanks for additional shank strength.

The letter "G" indicates Zerk Lubricator (standard on HFX G/HMX G Series). The letter “L” to prefix indicates Left Hand thread.

Please refer to the supplied chart for technical specifications and the RBC® HEIM® Bearings Catalog for additional information.

RBC NICE 5000 Series bearings are similar in construction to those of 400 Series except that they have a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. Designed for moderate loads and speeds (not exceeding 1200 rpm) where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. They feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pre-greased as a standard. 

NICE 5000 Series Specifications (See chart )

The HEIM® BEARINGS company has been acquired by RBC® BEARINGS, a leader in the world of highly engineered bearing products. 

HEIM® BEARINGS produces the industry's widest range of rod end bearing sizes (aka rod ends) in  the following four grades (types): precision, aircraft, military and commercial with each grade including different series suitable for respective application requirements. HEIM® BEARINGS are made from different materials featuring among others high strength two piece designs, high capacity designs, self-lubricating options and thermoplastic races or Teflon® liners. Please consult the supplied table on different grades and series offered.

- Precision rod ends are manufactured to tight tolerances for applications requiring improved linkage accuracy and reduced looseness. 

- Aircraft rod ends use premium materials, and have magnafluxed rod end bodies. Originally intended for aircraft applications, aircraft rod ends are used in many industrial applications where a high degree of reliability is required

- Military rod ends are produced in strict accordance with all applicable military specifications and are typically used in military and commercial aviation applications, or when Mil-Spec approval is required

- Commercial rod ends are produced using standard materials and manufacturing methods, and consist an economical choice for industrial applications

The HEIM® BEARINGS HME M/HFE M series self lubricating aircraft rod ends, male and female threaded respecively, use HEIM® UNIFLON® PTFE liner and cartridge type construction. The HEIM® UNIFLON® PTFE liner is approved to SAE-AS81820 (formerly MIL-B-18820). Their rod end bodies are made from aircraft quality carbon steel, magnetic particle inspected with protective coating for corrosion resistance. Balls  are made from 52100 alloy steel, heat treated and chrome plated on aluminum race inserts.

Letter “L” in the prefix indicates Left Hand thread

Please refer to the supplied chart for technical specifications and the RBC® HEIM® Bearings Catalog for additional information.

The RBC® BEARINGS offers a full line of airframe control ball bearings to the aerospace industry  in both “Standard” and “Precision” series. The prefix “M” in a bearing number indicates that it is of a precision series. Although designed and manufactured under demanding quality control requirements for airborne systems, these bearings have been successfully used in many industrial applications, where oscillatory movement, high loads, or corrosive environments are prevalent.

RBC® BEARINGS airframe control ball bearings conform to SAE-AS7949 (formerly MIL-B-7949) and many major OEM specifications. These bearings are of lightweight design, corrosion-resistant, grease-lubricated, and typically sealed. Airframe control bearing rings and balls are made of hardened bearing alloy, AISI 52100, with all exposed surfaces, except bearing bore, caps and seals, plated for corrosion protection. For improved corrosion protection, RBC® BEARINGS  supplies bearings made of hardened stainless steel alloy, AISI 440C. This alloy may be passivated or plated with cadmium or zinc nickel for enhanced corrosion protection.

The RBC® BEARINGS MKP/MKP-A SAE-AS7949 Precision Series airframe control bearings are single row, heavy duty (MKP) or medium duty (MKP-A) radial ball bearings with PTFE seals and CRES sealcaps. MKP Series bearings conform with MS27640-R specifications while those of MKP-A Series with MS27641-R. External surfaces (except bore, caps, and seals) are cadmium plated. They come prelubricated for life and are also offered with CRES 440C material and/or zinc nickel plating per OEM specifications. For additional information please refer to the supplied documentation.

AS81820 Standard bearings are Plain Self-Aligning, Self-Lubricating ,Low Speed bearings with a -65 TO +325 °F temperature operating range offered in different specifications with those of SAE AS Standard superseding the Military Standard  respective parts.  AS81820 Standard bearings include AS14101/MS14101 narrow, grooved race, AS14102/MS14102 wide, chamfered race, AS14103/MS14103 wide, grooved race, and AS14104/MS14104 narrow, chamfered race.

AS14101/MS14101 and AS14104/MS14104 bearings included in this presentation are offered as OEM parts by different manufacturers including RBC® BEARINGS, NEW HAMPSHIRE BALL BEARINGS® (NHBB), AURORA BEARING COMPANY® and others as well as their replacements by NATIONAL PRECISION BEARING® (NPB).

SAE-AS14102 and SAE-AS14103 (separately listed) supersede those of MS14102 and MS14103 specifications. They are both are wide plain spherical bearings, self lubricating self aligning, and low speed, designed for operation in high temperature environments  (-65°F to +325°F  or -53.9°C to +162.8°C). Their inner and outer rings are made from Corrosion Resistant Steel (CRES). AS14102/MS14102 series bearings come with a chamfered outer ring while those of AS14103/MS14103 series come with a grooved outer ring. They are offered as either OEM parts from RBC® BEARINGS or as part of our separately listed own label (AVIATIONEU NEW ERA) product lines sourced from quality manufacturers. 

For more information please refer to the Product Description section and other supplied documentation.

In 1971 AURORA BEARING COMPANY entered the rod end and spherical bearing market and soon became a major force in the rod end industry. The AURORA BEARING product potfolio today includes both Aerospace / Military and Commercial / Industrial rod ends and standard spherical bearings in inch and metric systems while special bearings can be designed and manufactured on request. Different series of these bearings are separately presented together with respective documentation.

AURORA BEARING MW & MG Series include Precision General Purpose Female Rod Ends with the following features. Rod ends in these series are equivalent to RBC® HEIM® BEARINGS part numbers shown in the parenthesis.

Body - Low carbon steel, protective coated for corrosion resistance. Size 16 standard series body is alloy steel not heat treated.

Ball - Alloy steel, heat treated, hard chrome plated.

Race - Low carbon steel, protective coated for corrosion resistance.

Left-hand threaded units have an identification groove near end of shank.

Grease Fitting available for sizes -3 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: MW-6Z = Zerk Type Fitting MW-6F = Flush Type Fitting.

Load ratings apply only to rod ends without grease fittings.

Studded configuration available upon request. Specify by adding suffix "S". Ex.: MW-8S.

PTFE Liners available upon request. Specify by adding suffix "T". Ex.: MW-8T.