ATI® TOOLS 106A series flush swivel type rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Rivet Type: Flush Swivel Type. Shank diameter 0.401".  

Νuts and collars by HI-SHEAR CORPORATION, subsidiary of LISI AEROSPACE, are designed to fit with their related HI-LOK™/HI-TIGUE™ and HI-LITE™ pins  (separately presented) forming the respective fastener system. HI-LOK™ nuts and collars are designed to fit HI-LOK™ & HI-TIGUE™ pins. HI-LITE™ nuts and collars are designed to fit HI-LITE™, PULL-IN™, PULL-STEM™ & TAPER HI-LITE™ pins.

With a wide range of shapes, materials and coatings, they are suited for most of structural assemblies and are commonly used in the aerospace industry in tension and shear applications. Collars’ wrenching element is designed to break-away at a controlled preload. It has been tested over time and has proven its reliability when installed with non-torque-controlled tools. Main features of nuts and collars include:

- controlled preload

- wide variety of materials and coatings for installation in all structures

- suitable for shear or tension applications, with captive washer, self-aligning or self-sealing options

- limited access installation, using conventional tooling

- designed with a counterbore to fit nominal and oversized pins

- nuts allow customized torque and preload & low height design for low access areas

Please refer to the supplied documentation for additional information.

ATI® TOOLS ATIST1111BK3 anti-slip rivet set, H13 magnetic particle tested. Manufactured to Boeing® specifications. It features polyurethane rim to prevent slipping and damage to skin surfaces. Shank diameter 0.401". Length 2-1/2″. Face diameter 1-1/4″.

ATI® TOOLS 107A series flush straight drive rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. Large radii at critical points enable these rivets to withstand continuous rugged use.They are slightly crowned with a highly polished face designed for rapid flush riveting where a smooth skin surface is essential and feature large radii at critical points to prevent breakage, protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Shank diameter 0.401".  Different sizes are available serve specification requirements for face diameters and lengths.

Solid shank rivets are relatively low-cost,  permanently installed fasteners used as structural parts in aircraft and other applications where reliability and safety consist a priority.  These rivets are produced in accordance with military and other international standards such as US Army-Navy (AN) standard and Mil-Spec (MS) that followed. AN426/MS20426 and AN470/MS20470 Series rivets are solid aluminum rivets with countersunk head or universal head respectively. Sourced from quality suppliers they are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They are  available in different diameters and lengths and sold by the pound (lb). Those designated by the letter "A" in their part numbers are "soft" rivets fabricated from 1100-grade aluminum with a tensile strength of 16,000 PSI while rivets designated by the letters "AD" are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI. For additional information please refer to the article on an overview of our fasteners, other supplied documentation, the individual product presentations or contact us.

MONOGRAM AEROSPACE FASTENERS® is part of TRIMAS AEROSPACE™ which serves the world’s markets with industry leading products including specialty fasteners, temporary fasteners for fixturing and alignment, fastener installation tools, finishing and removal tools and the design of innovative fastening solutions for the aerospace industry. The blind rivet portfolio of MONOGRAM AEROSPACE FASTENERS® includes:

The Visu-Lok® family of high strength fasteners available to 112 KSI shear. Designed for use in metal structures they address the need for cost-effective one-sided fastener installation as they are fully installed and verified from one side of the structure. Features: High strength. ease of installation, self-locking resisting loosening in severe vibration, available in a wide range of materials, unified or metric sizes, head styles, including oversize and close tolerance interference fit configurations, compliance with NAS standards, easily adapted to robotic or automated installation.

Composi-Lok® fasteners, industry's standard for blind fastening of composite laminates but equally well-suited to metal structures, they  provide superior joint integrity. Approved on virtually all composite airframe programs throughout the world. Features: large blind upset eliminating composite damage, easy, labor-saving one-sided installation, controlled clamp-up, compatible with graphite, available in titanium or CRES materials to resist galvanic corrosion, visual locking, fuel-tight sealing capability.

Radial-Lok® unique hole-filling, high strength blind fasteners. With their uniform radial expansion throughout the entire fastener grip, they are uniquely suited to offer both enhanced fatigue strength & lightning strike damage protection. Uniform radial expansion throughout the entire length of the clearance fit hole. Features: interference fits to .006″, enhanced fatigue life, eliminate costly hole preparation, clearance fit before installation, easy one-sided installation, high clamp-up,  large blind-side upset, tighter joints, ideal for aluminum and composite applications, available in 3/16″ through 3/4″ diameters, including oversizes, .100″ grip accommodation, 7-deg. blind slope capability.

OSI-Bolt®, the only blind bolts capable of equivalent usage with solid shank bolts offering a full 1.5D bearing area. Direct replacement for solid shank pin-and-collar systems. Suited for primary structures they deliver strength with the added advantages of simple one-sided installation & a flush break-off for installed cost savings in both metal and composite structures. The updated titanium Ti-OSI® combines all these advantages in a weight-saving configuration. Features: availability in 95 & 112 KSI shear and a variety of hex, tension, shear, and protruding head styles, diameters from 5/32″ to 1/2”, 1/64” and 1/32” oversize availability, 1/16” grip with +/- .015” capability, “Vise-like” sheet take-up, flat, uniform blind-side footprint ...

ATI® TOOLS 105A series AN470/MS20470 universal-head cup shaped double offset drive rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Rivet Type: AN470/MS20470 universal-head. Shank diameter 0.401".  Available in different rivet sizes, body diameters and lengths in inches.

The rivet pin range by HI-SHEAR CORPORATION, subsidiary of LISI AEROSPACE, offers a versatile solution for most of structural assemblies. They consist a very common type of threaded fastener used for clearance, transition and low interference fit throughout the airframe (metallic and composite), from wings to fuselage, in engine fairings, and more. Easily installed from one side, by one person with conventional tooling.

HI-SHEAR rivet pin product portfolio includes the original HI-LOK™ (HL™) system, the latest HI-LITE™ (HST™) pins with an improved recess and HI-TIGUE™ (HLT™) pins with improved fatigue benefits. They can be used in shear and/or tension applications on plain or sloped surfaces and feature controlled preload, a wide range of sizes and variety of materials and coatings for installation in all structures.

Most fasteners are mainly loaded in shear. That should be the only way for rivets as their tension capability is relatively low. Whenever there is a substantial tension load in a fastener, a threaded bolt should be used.

HI-LOK™ (HL™) is the original and versatile solution, a simple two-part fastener for strong and reliable assemblies. HI-LOK™ pins are commonly used in applications requiring high tensile strength in extreme environments. Consistent torque on installed fasteners is achieved through the integrated functions of the system working together. A carefully regulated breakoff groove in the self-locking HI-LOK™ collar  (separately presented) provides uniform preload values by separating when the correct torque level is reached. This controlled preload of each HI-LOK™ in the structure improves the fatigue life of the airframe significantly when compared to other fastening systems, including swaged collar type. HI-LOK™ pins and HI-LOK™ collars offer extremely precise dimensions making these fasteners commonly used in space, military, and commercial aviation application. They are both threaded and require common installation tools making  HI-LOK™ fasteners easy to install and remove.

HI-LITE™ (HST™) rivet pins are direct descendants from their original HI-LOK™ series counterparts but significantly lighter as they are made from 6Al-4V Titanium alloy resulting in improved weight saving. Combined with HI-LITE™ nuts and collars (separately presented), they provide up to 13% weight saving compared to the previous HI-LOK™generation. Both HI-LOK™ and HI-LITE™ rivet pins are also available with ASTER improved recess (HSTR pins) that prevents failure during the assembly process,  especially suited for clearance fit assemblies of composite structures.

HI-TIGUE™ (HLT™) pin series has improved fatigue benefits by combining the hole-improvement qualities of the HI-TIGUE™ pins and the consistent preloading qualities of the HI-LOK™ collars.

Additional information is available in Product Description section and the supplied documentation.

CHERRY® AEROSPACE MBC® Blind Fastening System  is one of the industry’s simplest and most versatile riveting systems available today. These fasteners are offered as standard MBC® rivets, simple, two-piece assemblies comprised of a MBC® rivet sleeve and a stem with an integral locking feature and as MBC® Lock Creator rivets (MBC®-L/C), same as the standard MBC® rivets with the addition of a lock creator anvil. This additional component simplifies installation of the fastener by allowing a single nose tip for installing the three available diameters. Whether standard MBC® or MBC®-L/C rivets are used, each rivet comes complete as a single-piece assembly, ready for installation. CHERRY® AEROSPACE MBC® Blind Rivets are offered in aluminum and stainless steel versions and in different finishes. Both the aluminum and stainless steel series MBC® rivets are available in 1/8" (3.2mm), 5/32" (4.0mm) and 3/16" (4.8mm) diameters, with flush, reduced flush or protruding rivet head styles. Respective information is designated in their part numbers by respective codes as follows:

CHERRY® MBC® Blind Rivet PN Structure NAS17 (NAS Number) (Head Style) (Material Code) (Rivet Diameter) L (Grip Size) (Finish Code)

NAS Number  (19, 20 or 21)

Head Style

Material Codes: C - CRES Stainless Steel, H - 2014A Aluminum

Rivet Diameters: -4 (.125), -5 (.156) -6 (.188)

L indicates Lock Creator, Dash (-)indicates Standard

Grip Sizes: NAS Grip sizes are correlated with respective CHERRY® AEROSPACE Grip Numbers (please consult the supplied documentation).

Finish Codes: A Clear Anodize per SAE AMS-A-8625, F Chemical Film per SAE AMS-C-5541, Passivation per AMS 2700, W Cadmium Plate AMS QQ-P-416, N Natural Finish

Sold in pieces but mostly in packs where the specified number of rivets per pack is indicated after the letters "PK" in the product reference number (SKU). Appearing prices are always for the units of measurement used each time.

HSTOOLING (formerly HI-SHEAR TOOLING) is a brand of ZEPHYR Manufacturing Co., Inc. (aka Zephyr Tool Group) designing and manufacturing the highest quality aerospace and industrial assembly tools and tooling systems.

HSTOOLING product porfolio includes installation, assembly and repair tools for Aerospace (air drills, riveters, both conventional rivet hammers and compression riveters, specialty fastener installation and other tools and accessories).

HSTOOLING ULTRALITE® compression riveters include different models covering different capacity requirements for aluminum and steel.They are  offered in Alligator jaw and C-Yoke models and feature ergonomic design, weight reduction vs. comparable-force models, high-strength forged jaws and C-yokes, precison bearings and shafts.  The new 702 and 702T alligator models posess outstanding force-to-size ratios. 

HSTOOLING Air Driver Assemblies are designed specifically for installing HI-SHEAR CORPORATION HI-LOK™ (*), HI-LITE™,  and HI-LOK™/HI-TIGUE™ pin and collar fastener combinations. They come in a variety of sizes and configurations, to drive fasteners in both open and restricted-access areas. Compact, lightweight, fast and reliable HSTOOLING tooling systems generate low noise compared with conventional riveting, require minimum employee training, and are designed to operate at a normal factory air pressure of 90 psi with 1/4 or 3/8 inch air lines.

Installation/removal tools for Hi-Lok™ or Hi-Lok™ style fasteners made by Jiffy Air Tool and USATCO are also offered. Pleae refer to the respective product presentations.

For additional information please refer to the supplied documentation or contact us.

(*) The HI-LOK™ fasteners from HI-SHEAR CORPORATION, subsidiary of LISI AEROSPACE, are the second most used fasteners in aircraft structural assembly after the solid rivets MS20470 and MS20426. The HI-LOK™ fastener system includes a rivet pin (similar to a screw but with additional advantages) and a collar (similar to a nut).

ATI® TOOLS 100A series (straight drive) and 101A series (offset drive) AN470/MS20470 universal-head cup shaped  rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. Respective flush head rivets of ATI® TOOLS 100A/101A series are designated by the letter "F" after the series number (i.e. 100AF/101AF respectively. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Shank diameter 0.401". Available in different rivet sizes, body diameters and lengths in inches.

For over 60 years, CHERRY® AEROSPACE Installation Tools have been specified and used by aircraft manufacturers and repair facilities throughout the world. Each CHERRY® AEROSPACE fastening system is combined with a full range of tools to provide an overall systems approach that ensures optimum compatibility and consistent installation performance. Used worldwide, Their tools are are manufactured to provide maximum service with minimum care. They are offered in a wide variety of hand, pneumatic and pneumatic/hydraulic versions, with optional accessories to permit their use in difficult and limited access areas. The size and type of fastener being installed dictates the type of tool to be used. All installation tools are manufactured at CHERRY® AEROSPACE's plant in Santa Ana, CA, USA.and they are CE Certified.

For additional information please refer to the supplied documentation or contact us.

Blind Rivets are multi-piece rivet assemblies, capable of being installed from one side of the workpiece.Traditionally, blind rivets were used on aircraft leading edges, trailing edges, and close out areas which are limited to access to one side of the structure.  Current blind rivet usage has expanded to many additional areas of the aircraft in an effort to decrease labor expense and to address the ergonomic issues of solid riveting.

The CherryMAX® rivet by CHERRY® AEROSPACE is the most reliable, high strength structural fastener with visual inspectability in the world today.  It features the "Safe-lock" locking collar for more reliable joint integrity, and meets the requirements of PS-CMR-3000. CherryMAX® fasteners are currently available in 1/8" through 1/4" diameters in both nominal (CR3212 and CR3213 Series) and 1/64" oversize diameters (CR3242 and CR3243 Series). 

Please refer to the supplied documentation and the Product Description section for detailed information on CherryMAX® rivet and other blind rivets manufactured by CHERRY® AEROSPACE. 

AIRPRO INDUSTRY CORP. manufactures professional quality air tools, hand  & auto repair tools and accessories for professional applications under  the brand name AIRPROWU. AIRPROWU extensive product line ranges from aircraft tools to industrial, automotive/motorcycle ,tooling/molding, construction and auto body shop solutions and solutions for electronic assembly lines. AIRPROWU product line of Hydraulic Riveters include pneumatic, industrial hydraulic, air hydraulic riveter tools and others. Please refer to the specifications of individual riveters.

Blind Rivets are multi-piece rivet assemblies, capable of being installed from one side of the workpiece.Traditionally, blind rivets were used on aircraft leading edges, trailing edges, and close out areas which are limited to access to one side of the structure.  Current blind rivet usage has expanded to many additional areas of the aircraft in an effort to decrease labor expense and to address the ergonomic issues of solid riveting.

The CherryLOCK® blind rivets by CHERRY® AEROSPACE come in below  mentioned types, and in different sizes, materials and strength levels. A complete range of recommended power tools, hand tools and pulling heads are also available.

CherryLOCK® ‘A’ Code “non-shift”, self-plugging blind rivets 

Single action, mechanically locked, wire-drawing fasteners providing excellent hole-fill and sheet take-up capability. They conform to the Procurement Specification NAS 1400 and Standards Pages NAS 1398 and NAS 1399.These rivets are offered in aluminum, monel and A-286 stainless steel materials in a wide variety of diameters and grip ranges. CherryLOCK® ‘A’ Code  "Wiredraw"  rivets are locked spindle flush fracturing structural rivets manufactured in 3/32", 1/8", 5/32", 3/16" and 1/4" diameters in 100° flush head and protruding head style configurations and offer grip ranges from .020 in the smaller diameters to 1.073 in the larger diameters. The 3/32" diameter rivet is available in A-286 only with grips ranging from .020 to .562. Rivets 1/8" diameter and larger have head markings to identify grip, material and manufacturer for ready inspection. The flush fracturing spindle eliminates the need for shaving and meets the flushness requirement of the NAS 1400 specification. These rivets are especially suited for sealing applications and joints requiring excellent sheet take-up and allow simple installation with a wide variety of Cherry® nonshifting and shifting tools. 

Both CherryLOCK® ‘A’ & Wiredraw Rivets rivets are designed to provide strong, reliable fastening solutions, but the choice between them may depend on specific application requirements, such as material compatibility, strength needs, and installation conditions. Both offer a wide grip range, making them versatile for different thicknesses.

Bulbed CherryLOCK® locked spindle and flush fracturing structural rivets

They consist a complete shear fastening system.  Their features can be utilized for optimum strength and performance in both thick and thin sheets. They provide the highest possible design integrity, particularly in double dimple or thin backside sheet applications. CherryLOCK® hydroshift installation tool systems are required for installation. They conform to Procurement Specification NAS1740 and Standards Pages NAS1738 and NAS1739.

For additional information on CherryLOCK® rivets and other blind rivets manufactured by CHERRY® AEROSPACE (separately listed) please refer to the supplied documentation and the Product Description section. 

AVERY TOOLS (*) manufactures and supplies gauges for shop rivet heads and rivet lengths.

AVERY TOOLS rivet head gauges are offered as a set of four gauges for -3, -4, -5, & -6 rivets. Each gauge measures MINIMUM height and MINIMUM diameter of shop heads AFTER setting. Eliminates guessing if your rivets are properly set. Works for measuring both universal head and flush rivets. Precision machined to size from 2024 aluminum. Rivet size permanently stamped on each gauge. Color coded anodized finish.

A rivet length gauge is also available to check for proper length of rivets BEFORE setting and can be ordered separately or as kit with the head gauges. 

(*) AVERY TOOLS aviation tools and products are now available only through retail suppliers.

Blind rivets (also commonly referred to as POP Rivets) are mainly used in applications where there is no access to the rear (blind side) of the joint. Rivets have a two-piece construction, the rivet body, shell, or hat and the stem or mandrel. Both the hat and mandrel are pre-assembled and ready to use. Rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint. Upon reaching the designed clamping force, the mandrel snaps and is discarded. A benefit of blind rivets is that they are not material specific and therefore they can be used to combine two different material types together. Furthermore, there is no way to over or under-torque a rivet. If the appropriate diameter and grip range are chosen correctly, the rivet will be installed perfectly every time.

Sourced by quality suppliers, blind rivets, offered as part of our own labelled (AVIATIONEU NEW ERA) product lines, come in different materials, sizes, military or industrial standards and packing options to meet different application requirements. They are intended for use in a wide range of applications including  aircrafts, ships, submersibles, RVs, trailers,  machinery, small electronics, structural beams and others. Please refer to the individual product presentations to find the rivet which best suits your needs. 

AVIATIONEU NEW ERA Metric (M) aluminum alloy/steel rivets with a galvanized surface treatment are produced in accordance with DIN 7337 standard. Competitively priced, they are offered in different rivet diameters and lengths in mm.  Sold in packs with the number of rivets per pack indicated in the product SKU after the letters "PK". Appearing sale prices are per pack. For additional information please refer to the supplied documentation or contact us.

Economy models of gauges for shop rivet heads and rivet lengths are available from ATS.

ATS rivet head gauges are offered as a set of four gauges for -3, -4, -5, & -6 rivets. Each gauge measures MINIMUM height and MINIMUM diameter of shop heads AFTER setting. Works for measuring both universal head and flush rivets. Color coded anodized finish.

ATS rivet length gauge measures -3, -4, -5 & -6 rivets. Used to check length of rivets BEFORE setting. Works with universal and flush head rivets.

The set of rivet head gauges and the length gauge can be ordered as kit or separately.

MS20604 and MS20605 series both relate to non structural blind rivets with universal head (MS20604) or 100 Deg. flush head (MS20605).

MS20604 and MS20605 series blind rivets are superseded by those of NASM20604 and NASM20605 respectively.

Sourced from quality manufacturers, NASM20604/MS20604 and NASM20605/MS20605 blind rivets are offered as part of our own label (AVIATIONEU NEW ERA) product lines.

They are sold in packs of specified number of rivets per pack indicated after the letters "PK" in the product reference code (SKU).