Solid shank rivets are relatively low-cost,  permanently installed fasteners used as structural parts in aircraft and other applications where reliability and safety consist a priority.  These rivets are produced in accordance with military and other international standards such as US Army-Navy (AN) standard and Mil-Spec (MS) that followed. AN426/MS20426 and AN470/MS20470 Series rivets are solid aluminum rivets with countersunk head or universal head respectively. Sourced from quality suppliers they are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They are  available in different diameters and lengths and sold by the pound (lb). Those designated by the letter "A" in their part numbers are "soft" rivets fabricated from 1100-grade aluminum with a tensile strength of 16,000 PSI while rivets designated by the letters "AD" are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI. For additional information please refer to the article on an overview of our fasteners, other supplied documentation, the individual product presentations or contact us.

USATCO C-Yoke riveters are available in single cylinder and tandem cylinder types, both in standard and high force versions. They cover different capacity requirements for use in aluminum and steel and feature quiet, easy operation, CE approval and swivel air inlets. Clamping force exceeds federal specifications. USATCO C-yokes are available for different mounting spacings and furnished with .187” or .250” set holes. 

For additional information please refer to the attached documentation or contact us.

Solid shank rivets are relatively low-cost,  permanently installed fasteners used as structural parts in aircraft and other applications where reliability and safety consist a priority.  These rivets are produced in accordance with military and other international standards such as US Army-Navy (AN) standard and Mil-Spec (MS) that followed. AN426/MS20426 and AN470/MS20470 Series rivets are solid aluminum rivets with countersunk head or universal head respectively. Sourced from quality suppliers they are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They are  available in different diameters and lengths and sold by the pound (lb). Those designated by the letter "A" in their part numbers are "soft" rivets fabricated from 1100-grade aluminum with a tensile strength of 16,000 PSI while rivets designated by the letters "AD" are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI. For additional information please refer to the article on an overview of our fasteners, other supplied documentation, the individual product presentations or contact us.

MS20604 and MS20605 series both relate to non structural blind rivets with universal head (MS20604) or 100 Deg. flush head (MS20605).

MS20604 and MS20605 series blind rivets are superseded by those of NASM20604 and NASM20605 respectively.

Sourced from quality manufacturers, NASM20604/MS20604 and NASM20605/MS20605 blind rivets are offered as part of our own label (AVIATIONEU NEW ERA) product lines.

They are sold in packs of specified number of rivets per pack indicated after the letters "PK" in the product reference code (SKU).

Countersinking is used to ensure that flat head screws or fasteners sit flush against the workpiece. JITTERBUG Pilot Countersink Cutters can be used with flush rivets in different countersinking applications. They consist cost effective alternatives to other brands. They are available separately or in convenient sets of different pilot diameters. Offered sets include 6 pieces (1/4 5/16 3/16 5/32 3/32 1/8 in.) or 4 pieces (3/16 5/32 3/32 1/8 in.) per set. For additional information please consult the supplied documentation or contact us.

AIRPRO INDUSTRY CORP. manufactures professional quality air tools, hand  & auto repair tools and accessories for professional applications under  the brand name AIRPROWU. AIRPROWU extensive product line ranges from aircraft tools to industrial, automotive/motorcycle ,tooling/molding, construction and auto body shop solutions and solutions for electronic assembly lines. AIRPROWU product line of Hydraulic Riveters include pneumatic, industrial hydraulic, air hydraulic riveter tools and others. Please refer to the specifications of individual riveters.

ATI® TOOLS 501 series aerospace heavy duty rivet cutters are designed to quickly and easily shear aluminum rivets. They are adjustable for 1/4˝ to 3/4˝ long rivets in 1/16˝ increments. Available in two models with standard handle (ATI 501R) and long handle (ATI 501S).

JIFFY® AIR TOOL is a market leading solutions provider specializing in professional grade hand held, limited access, pneumatic drilling and fastener installation tools for the aerospace and aircraft industries. Manufactured in the USA, their product portfolio includes an extensive line of specialty hand-held pneumatic tools designed and built for easy, trouble-free operation and reach into difficult areas. Their tools are widely used by airframe assembly, maintenance, repair and overhaul facilities.

Modular Drill Motors & Attachments (JMD)

JIFFY® AIR TOOL pioneered the “Modular Tool” platform for drill motors and attachments (JMD). JIFFY® motors can accept a wide variety of drill attachments to meet limited access requirements.JIFFY® Pistol Grip Straight style drilling tools are offered in models with forward running, reverse running and reversible functions, safety trigger option, 250 – 20,000 RPM, and 0.3 – 1.5 HP.  Available Thread Sizes: 1/4-28, 10-32, 9/32-40, 5/16-24, 3/8-24 and 7mm Collet.

Modular Fastener Installation Tools (JMI)

With JIFFY® modular fastener installation platform installation motors can accept a wide variety of install attachments to meet limited access requirements. The latter are available in 17° indexable or fixed, 20° indexable or fixed, “L”, and straight install type offered in various series correlating to the torque capacity of the fastener. Their versatility is further enhanced by the three offered drive styles: a socket and key system,a flush gear with a key and a hex through with no key control to allow access to confined space installations.

In addition to the modular installation tools, ratchet install tools in straight, 17° and 20° head styles are also available. Their pneumatic ratchet wrenches can be used for HI-SHEAR fastener (*) installation quickly, easily, and efficiently. Their new & improved spring loaded hex tip holder allows the use of special hex tips that will hold the HI-LOK™ style fastener in place when installing non-interference fasteners. With the new & improved design, hex tips are easier than ever to change and can literally be changed in just a few seconds.JIFFY®  sockets and hex tips (sold separately) can be used with these wrenches.

For additional information please refer to the supplied documentation or contact us.

 (*) HI-SHEAR CORPORATION Fastening System includes HI-LITE™, HI-LOK™ and HI-LOK™/HI-TIGUE™ pin and collar fastener combinations. The HI-LOK™ fasteners are the second most used fasteners in aircraft structural assembly after the solid rivets MS20470 and MS20426. The HI-LOK™ fastener system includes a rivet pin (similar to a screw but with additional advantages) and a collar (similar to a nut). Pneumatic installation/removal tools for HI-LOK™ or HI-LOK™ style fasteners are also offered by  HS Tooling and U.S Air Tool Co. (USATCO). Please refer to the respective product presentations.

Blind Rivets are multi-piece rivet assemblies, capable of being installed from one side of the workpiece.Traditionally, blind rivets were used on aircraft leading edges, trailing edges, and close out areas which are limited to access to one side of the structure.  Current blind rivet usage has expanded to many additional areas of the aircraft in an effort to decrease labor expense and to address the ergonomic issues of solid riveting.

The CherryMAX® rivet by CHERRY® AEROSPACE is the most reliable, high strength structural fastener with visual inspectability in the world today.  It features the "Safe-lock" locking collar for more reliable joint integrity, and meets the requirements of PS-CMR-3000. CherryMAX® fasteners are currently available in 1/8" through 1/4" diameters in both nominal (CR3212 and CR3213 Series) and 1/64" oversize diameters (CR3242 and CR3243 Series). 

Please refer to the supplied documentation and the Product Description section for detailed information on CherryMAX® rivet and other blind rivets manufactured by CHERRY® AEROSPACE. 

ATI® TOOLS ATIST1111BK3 anti-slip rivet set, H13 magnetic particle tested. Manufactured to Boeing® specifications. It features polyurethane rim to prevent slipping and damage to skin surfaces. Shank diameter 0.401". Length 2-1/2″. Face diameter 1-1/4″.

CHERRY® AEROSPACE MBC® Blind Fastening System  is one of the industry’s simplest and most versatile riveting systems available today. These fasteners are offered as standard MBC® rivets, simple, two-piece assemblies comprised of a MBC® rivet sleeve and a stem with an integral locking feature and as MBC® Lock Creator rivets (MBC®-L/C), same as the standard MBC® rivets with the addition of a lock creator anvil. This additional component simplifies installation of the fastener by allowing a single nose tip for installing the three available diameters. Whether standard MBC® or MBC®-L/C rivets are used, each rivet comes complete as a single-piece assembly, ready for installation. CHERRY® AEROSPACE MBC® Blind Rivets are offered in aluminum and stainless steel versions and in different finishes. Both the aluminum and stainless steel series MBC® rivets are available in 1/8" (3.2mm), 5/32" (4.0mm) and 3/16" (4.8mm) diameters, with flush, reduced flush or protruding rivet head styles. Respective information is designated in their part numbers by respective codes as follows:

CHERRY® MBC® Blind Rivet PN Structure NAS17 (NAS Number) (Head Style) (Material Code) (Rivet Diameter) L (Grip Size) (Finish Code)

NAS Number  (19, 20 or 21)

Head Style

Material Codes: C - CRES Stainless Steel, H - 2014A Aluminum

Rivet Diameters: -4 (.125), -5 (.156) -6 (.188)

L indicates Lock Creator, Dash (-)indicates Standard

Grip Sizes: NAS Grip sizes are correlated with respective CHERRY® AEROSPACE Grip Numbers (please consult the supplied documentation).

Finish Codes: A Clear Anodize per SAE AMS-A-8625, F Chemical Film per SAE AMS-C-5541, Passivation per AMS 2700, W Cadmium Plate AMS QQ-P-416, N Natural Finish

Sold in pieces but mostly in packs where the specified number of rivets per pack is indicated after the letters "PK" in the product reference number (SKU). Appearing prices are always for the units of measurement used each time.

HSTOOLING (formerly HI-SHEAR TOOLING) is a brand of ZEPHYR Manufacturing Co., Inc. (aka Zephyr Tool Group) designing and manufacturing the highest quality aerospace and industrial assembly tools and tooling systems.

HSTOOLING product porfolio includes installation, assembly and repair tools for Aerospace (air drills, riveters, both conventional rivet hammers and compression riveters, specialty fastener installation and other tools and accessories).

HSTOOLING ULTRALITE® compression riveters include different models covering different capacity requirements for aluminum and steel.They are  offered in Alligator jaw and C-Yoke models and feature ergonomic design, weight reduction vs. comparable-force models, high-strength forged jaws and C-yokes, precison bearings and shafts.  The new 702 and 702T alligator models posess outstanding force-to-size ratios. 

HSTOOLING Air Driver Assemblies are designed specifically for installing HI-SHEAR CORPORATION HI-LOK™ (*), HI-LITE™,  and HI-LOK™/HI-TIGUE™ pin and collar fastener combinations. They come in a variety of sizes and configurations, to drive fasteners in both open and restricted-access areas. Compact, lightweight, fast and reliable HSTOOLING tooling systems generate low noise compared with conventional riveting, require minimum employee training, and are designed to operate at a normal factory air pressure of 90 psi with 1/4 or 3/8 inch air lines.

Installation/removal tools for Hi-Lok™ or Hi-Lok™ style fasteners made by Jiffy Air Tool and USATCO are also offered. Pleae refer to the respective product presentations.

For additional information please refer to the supplied documentation or contact us.

(*) The HI-LOK™ fasteners from HI-SHEAR CORPORATION, subsidiary of LISI AEROSPACE, are the second most used fasteners in aircraft structural assembly after the solid rivets MS20470 and MS20426. The HI-LOK™ fastener system includes a rivet pin (similar to a screw but with additional advantages) and a collar (similar to a nut).

The rivet pin range by HI-SHEAR CORPORATION, subsidiary of LISI AEROSPACE, offers a versatile solution for most of structural assemblies. They consist a very common type of threaded fastener used for clearance, transition and low interference fit throughout the airframe (metallic and composite), from wings to fuselage, in engine fairings, and more. Easily installed from one side, by one person with conventional tooling.

HI-SHEAR rivet pin product portfolio includes the original HI-LOK™ (HL™) system, the latest HI-LITE™ (HST™) pins with an improved recess and HI-TIGUE™ (HLT™) pins with improved fatigue benefits. They can be used in shear and/or tension applications on plain or sloped surfaces and feature controlled preload, a wide range of sizes and variety of materials and coatings for installation in all structures.

Most fasteners are mainly loaded in shear. That should be the only way for rivets as their tension capability is relatively low. Whenever there is a substantial tension load in a fastener, a threaded bolt should be used.

HI-LOK™ (HL™) is the original and versatile solution, a simple two-part fastener for strong and reliable assemblies. HI-LOK™ pins are commonly used in applications requiring high tensile strength in extreme environments. Consistent torque on installed fasteners is achieved through the integrated functions of the system working together. A carefully regulated breakoff groove in the self-locking HI-LOK™ collar  (separately presented) provides uniform preload values by separating when the correct torque level is reached. This controlled preload of each HI-LOK™ in the structure improves the fatigue life of the airframe significantly when compared to other fastening systems, including swaged collar type. HI-LOK™ pins and HI-LOK™ collars offer extremely precise dimensions making these fasteners commonly used in space, military, and commercial aviation application. They are both threaded and require common installation tools making  HI-LOK™ fasteners easy to install and remove.

HI-LITE™ (HST™) rivet pins are direct descendants from their original HI-LOK™ series counterparts but significantly lighter as they are made from 6Al-4V Titanium alloy resulting in improved weight saving. Combined with HI-LITE™ nuts and collars (separately presented), they provide up to 13% weight saving compared to the previous HI-LOK™generation. Both HI-LOK™ and HI-LITE™ rivet pins are also available with ASTER improved recess (HSTR pins) that prevents failure during the assembly process,  especially suited for clearance fit assemblies of composite structures.

HI-TIGUE™ (HLT™) pin series has improved fatigue benefits by combining the hole-improvement qualities of the HI-TIGUE™ pins and the consistent preloading qualities of the HI-LOK™ collars.

Additional information is available in Product Description section and the supplied documentation.

AICRAFT TOOL SUPPLY (ATS) is a manufacturer of tools and hardware for the aviation industry. ATS offers an extensive range of aircraft countersink cutters and piloted aircraft stop countersink cutters (aka Micro-Stop cutters or Microstop Countersinks) used to make precision countersinks to accept flush-head fasteners.

Our offered ATS countersinks include:

HSS 1/4-28 male threaded 3 cutting flute pilot cutters,

HSS 1/4-28 male threaded, 1/2” diameter zero flute pilot cutters,

HSS 1/4-28 male threaded removable pilot cutters with solid carbide tip (require 1500P pilot),

Hollow cutters designed to cut away swagged or threaded collars from fasteners,

Respective offered ATS Microstops include:

133-HD heavy duty Microstop Countersink with ball bearings for ultra smooth operation. The ball bearing design also makes it run much cooler than a standard microstop,

133-Mini Microstop Countersink for use  in tight areas that can’t be reached by a standard cage. 

133-Slim Microstop Countersink packing all the features of a standard microstop in a slim design of only 11/16” in diameter. 

 Complete kit is a great package deal featuring our 133

133 Microstop Countersink Kit which includes the Microstop and 4 pilot cutters (1000-100 series) in sizes #40, #30, #21, and #12. The kit is also offered with the countersink only.

For additional information please consult the supplied documentation or contact us.

The CHERRY® Nut-Plate family of fasteners offers an extensive range of head styles in a low cost, pull through style rivet. Rivet heads include the CCR/CCMR274, “Universal”, CCR/CCMR264, 100° Flush, and the CCR/CCMR244, 100° Reduced Flush head (NAS 1097). Sleeve materials include C1018 steel or A-286 CRES stainless steel. Single action installation tools are all that is required to complete this low cost fastening system. Recommended installation tools include the G29 hand tool, which is sold complete with pulling head, or the G902/G902-15 lightweight power tool with pulling heads sold separately.

For additional information please refer to the supplied documentation or contact us.

ATS Pro-X rivet guns offer unmatched controllability when setting rivets of any type or size. They are used in aircraft manufacturing plants such as Boeing and Lockheed-Martin. With the improved variable power control, proper riveting can be accomplished with confidence.  Different models serve specification requirements (see attached table). 1/8" Aluminum (3/32" Steel) Rivet Capacity. These guns accept all .401 shank rivet sets and attachments. Non-slip Powder Coat Finish. 1/4" NPT Inlet. Lifetime ATS-Pro Warranty.

AIRPRO INDUSTRY CORP. manufactures professional quality air tools, hand  & auto repair tools and accessories for professional applications under  the brand name AIRPROWU. AIRPROWU extensive product line ranges from aircraft tools to industrial, automotive/motorcycle ,tooling/molding, construction and auto body shop solutions and solutions for electronic assembly lines. AIRPROWU compression riveters include different models covering different capacity requirements for aluminum and steel. They come in different dimensions and are  offered with matching yokes to cover various application needs. Please refer to the specifications of individual compression riveters.

Νuts and collars by HI-SHEAR CORPORATION, subsidiary of LISI AEROSPACE, are designed to fit with their related HI-LOK™/HI-TIGUE™ and HI-LITE™ pins  (separately presented) forming the respective fastener system. HI-LOK™ nuts and collars are designed to fit HI-LOK™ & HI-TIGUE™ pins. HI-LITE™ nuts and collars are designed to fit HI-LITE™, PULL-IN™, PULL-STEM™ & TAPER HI-LITE™ pins.

With a wide range of shapes, materials and coatings, they are suited for most of structural assemblies and are commonly used in the aerospace industry in tension and shear applications. Collars’ wrenching element is designed to break-away at a controlled preload. It has been tested over time and has proven its reliability when installed with non-torque-controlled tools. Main features of nuts and collars include:

- controlled preload

- wide variety of materials and coatings for installation in all structures

- suitable for shear or tension applications, with captive washer, self-aligning or self-sealing options

- limited access installation, using conventional tooling

- designed with a counterbore to fit nominal and oversized pins

- nuts allow customized torque and preload & low height design for low access areas

Please refer to the supplied documentation for additional information.

AVERY TOOLS (*) manufactures and supplies gauges for shop rivet heads and rivet lengths.

AVERY TOOLS rivet head gauges are offered as a set of four gauges for -3, -4, -5, & -6 rivets. Each gauge measures MINIMUM height and MINIMUM diameter of shop heads AFTER setting. Eliminates guessing if your rivets are properly set. Works for measuring both universal head and flush rivets. Precision machined to size from 2024 aluminum. Rivet size permanently stamped on each gauge. Color coded anodized finish.

A rivet length gauge is also available to check for proper length of rivets BEFORE setting and can be ordered separately or as kit with the head gauges. 

(*) AVERY TOOLS aviation tools and products are now available only through retail suppliers.

Blind rivets, also called "pop rivets", can be used when access to through-bolt isn’t possible. AVDEL® N (*) protruding head nail rivets by ELCO CONSTRUCTION PRODUCTS are suitable for metal to metal applications.Their body/mandrel is made from different materials: Aluminum/Aluminum, Steel/Steel, Aluminum/Steel or Stainless Steel/Stainless Steel. Aluminum and  18-8 Stainless Steel rivets for high strength and corrosion resistance, are widely used for marine applications such  as non-critical equipment installations on masts, radar towers and other structures with limited or no access to secure washers and nuts. They are ideal for installing deck lights, bimini frame brackets and much more. Rivets are available in a range of diameters and gripping lengths to match the needs of a variety of projects. Installation requires special tool with appropriate die to match mandrel diameter. Contact of dissimilar metals, like for example use of stainless steel rivets to install hardware on to the aluminum spars of a sailboat, should be avoided to guard against galvanic corrosion occurence. If the superior strength of stainless steel rivets is not required, the use of aluminum blind rivets should be considered for non-critical installations. Aluminum rivets can also be used below the waterline together with marine epoxy or Gluvit sealant for waterproofness. AVDEL® N rivets are sold in convenient packs. The number of pieces per pack is specified after the letters "PK" in the product reference number (SKU).

AVDEL® N Rivet Features:

•High quality with low in-place cost

•Vibration resistant

•Tamper-resistant

•Long grip ranges

•High pull out and shear strengths

•Work with all hand and battery powered riveters

•Conveniently packaged

•Custom painting

AVDEL® N Rivet Specifications:

•Diameters: 1/8", 5/32" and 3/16"

•Lengths: .275" to .980"

•Grip ranges: .020" to .750"

•Body/Mandrel material: Aluminum/Aluminum, Steel/Steel, Aluminum/Steel, Stainless/Stainless

Installation Tools: ELCO CONSTRUCTION G-28 Hand riveter for 1/8” and 3/16” diameter rivets. Use 728A9-104 additional nose piece for 5/32” diameter rivets.

(*) AVDEL® is a STANLEY® Engineered Fastening brand. 

For more information, please refer to the supplied documentation or contact us.