Manufactured by RADCO INDUSTRIES, RADCOLUBE® is an exceptional 3-in-1 Gun Oil for cleaning, lubricating, and short-term preservation of small and large caliber firearm platforms making their maintenance safe & convenient . With its advanced formulation and adherence to industry standards, this gun oil guarantees superior performance, reliability, and longevity for firearms used in diverse environments. It is the trusted brand of the US Military, Law Enforcement, and Competitive Shooters across the globe. RADCOLUBE® CLP Gun Oil 3IN1 is also the preferred firearm cleaner and lubricant of The Tactical Games™ (TTG) , Multi-Gun Competitors, Extreme Long Range Shooting Organization™ (ELRSO) and King of 2 Mile™ (KO2M) shooting organizations.

RADCOLUBE® CLP keeps small & large caliber weapons in optimum condition and can be used in harsh environments, including cold, salt & dust. It maintains maximum firing performance maintaining any weapon’s maximum firing rate without incident.

Being a Military-Grade CLP gun cleaner and lubricant, RADCOLUBE® CLP  addresses all aspects of the cleaning process, simplifies firearm maintenance, adheres to MIL-PRF-63460F specifications and meets the qualifications of DOD.

RADCOLUBE® CLP has a maximum recommended shelf life of 6 years from date of manufacture.

For additional information please consult the supplied documentation.

MS21071/MS21072 Series nut plates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers they are fixed low height self-locking, one lug, reduced rivet spacing miniature nutplates. Those included in MS21071 series are manufactured from cadmium plated carbon steel while the MS21072 nutplates are produced from corrosion resistant steel (CRES). They are available in different Unified thread sizes, with plain or countersunk rivet holes on each side and come with or without a dry film lube. MS21071/MS21072 Series are superseded by NASM21071/NASM21072 series respectively.

Nut plates with a dry film lube are specified by the letter "L" in the part number. Nut plates with countersunk rivet holes are specified by the letter "K" at the end of the part number.

Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

MS20604 and MS20605 series both relate to non structural blind rivets with universal head (MS20604) or 100 Deg. flush head (MS20605).

MS20604 and MS20605 series blind rivets are superseded by those of NASM20604 and NASM20605 respectively.

Sourced from quality manufacturers, NASM20604/MS20604 and NASM20605/MS20605 blind rivets are offered as part of our own label (AVIATIONEU NEW ERA) product lines.

They are sold in packs of specified number of rivets per pack indicated after the letters "PK" in the product reference code (SKU).

Eaton's Aeroquip® brand name represents quality and innovation in the aerospace industry and a wide range of options are available to meet the needs of aircraft OEM and maintenance engineers. Eaton’s Aeroquip hose, fittings, couplings and connectors are available for various pressures and applications. Lightweight and flexible rubber hoses, fittings & assemblies for aerospace applications qualified to industry standards are included within the company's product portfolio. The 306 Series is intended for low pressure while the 302A/303 Series (see separate product presentation) for medium pressure applications.

The 302A/303 medium pressure hose includes a seamless synthetic rubber compound inner tube with a single cotton braid reinforcement and a synthetic rubber outer cover. Operating temperatures: -65°F to +160°F (-53ºC to +71ºC). Used in air or vacuum instrument systems, automatic pilots and lines to pressure gauges used with these systems as specified in MS33620. Hose conforms to MIL-DTL-5593. Used with Aeroquip 491 hose fittings. Available in different tubing sizes and internal diameters in inches. Sold by the foot. Fittings are offfered in pieces and conform to MILDTL-38726 and MS27404 (superceding AN773). Hose assemblies conform to AN6270. For additional information please refer to the attached documentation.

CONNTECT® produces and supplies combustion turbine fuel additives, compressor cleaners & wash systems and related products. CONNTECT® gas turbine compressor cleaners include CONNTECT® 5000, 6000, 7000 and CONNTECT® AF-100 anti-icing fluid for use with all CONNTECT® compressor cleaners. They are suitable for both ON LINE and OFF LINE use while ceaners can be injected directly into the compressor while the turbine is operating ON LINE extending periodic OFF LINE cleaning intervals and reducing average power loss. Available in 5-gallon pails, 55-gallon (208-liter) drums and 330-gallon re-usable and disposable bulk containers (totes).

CONNTECT® 5000 - concentrated water based gas turbine compressor cleaner specifically designed to remove deposits commonly found on gas turbine compressor blades.

CONNTECT® 6000 - concentrated non-toxic high performance low foam water based gas turbine compressor cleaner with cleaning efficiency similar to solvent-based cleaners.

CONNTECT® 7000 - concentrated solvent-based gas turbine compressor cleaner. The combination of non-ionic surfactants, emulsifiers and organic solvents is specifically designed to remove deposits commonly found on gas turbine compressor blades including carbonaceous deposits, oil, grease and soot. It should not be used undiluted.

The ash free ingredients in CONNTECT® cleaners have been carefully selected to ensure that no incremental trace elements can contribute to corrosion of the hot section of the gas turbine, while they contain special inhibitors to ensure compatibility with aluminum, nickel, nickel-cadmium, stainless steel, titanium and common coatings including painted surfaces and elastomers. They can be generally mixed at 1 part cleaner to 4 parts water but the method of injection and total amount of cleaning solution required differs for ON LINE and OFF LINE cleaning.

CONNTECT® AF-100 is a superior quality, specially designed propylene glycol based gas turbine anti-icing fluid for use with all CONNTECT® compressor cleaners. It is non-hazardous, non-toxic and biodegradable. High purity, ash free product insuring no incremental contamination of the hot section of the turbine.  Depending upon the percentage of AF-100 used, the freezing temperature of the cleaning or rinsing solution can be reduced down to -22 deg. F (-30 deg. C). However, its viscosity increases significantly at cold temperatures should not be mixed with cleaner or water when the  product is very cold.

When battery terminals with heavy current capacity and high conductivity are required AVIATIONEU NEW ERA SC HEAVY DUTY lug type battery terminals are recommended. Similar to the AVIATIONEU NEW ERA SC brass battery terminals except that they are are produced from pure copper  and tin plated, they are available in three versions: SC(JGA), SC(JGY) and SC(JGB). Please refer to the specifications table. They can be used with wire sizes 1.5-1000mm2 (16AWG - 777MCM). Sold in packs of 20 pieces each with Minimum Order Quantity (MOQ) 5 packs. The appearing price is for reference only. Please contact us for quotation.

CHAMPION AEROSPACE designs and manufactures CHAMPION-brand filters and piston-engine ignition components for both OEM and aftermarket for general aviation aircraft applications.

CHAMPION FAA/PMA Approved Spin-On Oil Filters replace oil filter elements. They are easy to install and save time and clean-up.

Their full-pleat, resin-impregnated micronic filter media traps all harmful particles, including metallic chips which result from abnormal engine wear. Because the oil flows through many layers of locked-in fibers, there is no migration of fiber material to clog engine oil passages or affect bearing surfaces. According to industry-approved tests, the CHAMPION oil filters trap and hold more dirt and harmful particles during their normal operating time than any other similar filters. 

Product Features:

Replacement elements service engine-mounted or line-installed filter systems incorporating a permanent housing assembly.

All sizes of replacement elements are packed 12 per case of a single part number in heavy, re-shippable corrugated-board cartons

Modern spin-on oil filters contain the element, incorporating the anti-drain back valve mechanism (and internal bypass valve 48108-1/48109-1), and are sealed in a disposable housing.

All sizes of spin-on filters are packed 12 per case of a single part number in heavy, re-shippable corrugated-board cartons.

Silicone impregnated filter gasket aids in future removal.

Shorter stud length on CH 48110-1 for tight clearance applications.

Heavy, corrugated steel center tube supports each convoluted pleat of the filter element and produces a substantially higher collapse-pressure rating, twice that of other similar filters.

Maximum full-flow design, without interference from center-bolt oil filter assemblies, provides increased oil filtration each engine-operating hour.

Sold each or in packs of 12 filters per pack.

AMPHENOL Bayonet Neill Concelman (BNC) product series connectors are miniature quick connect RF connectors. They feature two bayonet lugs on the female connector. BNCs are ideally suited for termination on miniature and subminiature coaxial cable (RG-58, 59, to RG-179, RG-316, etc.). Other BNC series include:

HD-BNC product series featuring the trusted, push and turn interface of a traditional BNC and providing tactile feedback and a positive lock for quick and guaranteed mating and 

Mini-BNC product series allowing higher connector densities while preserving the positive characteristics of the full-size 75 Ω BNC. The Mini-BNC provides the same positive locking bayonet system found on the BNC but allows 40% more interconnects in the same area.

KAMAN CORPORATION bearings include a wide range of spherical bearings, rod ends and journal bearings. 

KAMAN KAMATICS Metal-To-Metal Self-Lubricating Spherical Bearings are designed with conventional stainless steel alloys, or other specialized alloys based on application, temperature and environment and come with KAron™ self-lubricating liners. They  are maintenance free and provide increased reliability and longer application life, reducing operating cost in challenging applications across industries.  They are offered in different series outlined below, in inch and metric systems and used in a a variety of applications in  aerospace (commercial fixed wing aircrafts), engines,commercial and military helicopters, heavy industry, hydropower, or marine vehicles.

KR-CN Series. MS14104 qualified bearings, narrow, chamfered outer race, -65° F to +325° F

KR-CNG Series. MS14101 qualified bearings, narrow, grooved outer race, -65° F to +325° F

KR-CW Series. MS14102 qualified bearings, wide, chamfered outer race, -65° F to +325° F

KR-CWG Series. MS14103 qualified bearings, wide, grooved outer race, -65° F to +325° F

KR-CN/4 Series. MS81820/4 qualified bearings, lined bore, narrow, chamfered outer race, -65° F to +325° F

KR-CNG/1 Series. MS81820/1  qualified bearings, lined bore, narrow,  grooved outer race, -65° F to +325° F

KR-CW/2 Series. MS81820/2 qualified bearings, lined bore, wide, chamfered outer race, -65° F to +325° F

KR-CWG/3 Series. MS81820/3 qualified bearings, lined bore, wide, grooved outer race, -65° F to +325° F

KR-CE Series. Extended inner race bearings, high misalignment, chamfered outer race

KR-CEG Series. Extended inner race bearings, high misalignment, grooved outer race

KR-C Series. Miniature Series bearings, chamfered outer race

For additional information and specifications please refer to the supplied documentation.

EXXONMOBIL® MOBIL™ AERO Series Aviation Hydraulic Fluids includes AERO HFA, HF, and HFS hydraulic fluids offered for aircraft systems where use of hydrocarbon hydraulic fluids is required. 

They are low viscosity, high VI (viscosity index) fluids with excellent low temperature properties, good anti-wear performance, and good chemical stability.

MOBIL™ AERO  HFA is a premium quality fluid that meets the requirements of the U.S. Military specification MIL-H-5606A (obsolete). It has a very high VI and is suitable for use at temperatures down to -54 ˚C (-65 ˚F). While this quality fluid is no longer used by the US Military, it is still used in some older, small private, and small commercial aircraft. It is also used in industrial and commercial equipment requiring good fluidity at very low temperatures, where MOBIL™ AERO  HFA provides long, trouble-free service over a wide range of

operating conditions.

MOBIL™ AERO HF is a premium quality fluid that is approved against the most current version of U.S. Military specification MIL-PRF-5606. It has physical properties very similar to MOBIL™ AERO HFA, and also meets “super-clean” requirements required by modern aircraft hydraulic systems. It is intended primarily for military aircraft. It is also used as a hydraulic fluid for small private and small commercial aircraft, and as a strut fluid in landing gear of large commercial aircraft. It is approved as a NATO Code Number H-515 fluid.

MOBIL™ AERO HFA and HF are composed of mineral oil base stocks and contain shear-stable VI improvers.

MOBIL™ AERO HFS is a synthetic polyalphaolefin lubricant that is approved against the most current version of U.S. Military specification MIL-PRF-83282. It does not contain a VI improver. It is designed for use at temperatures down to -40˚C (-40˚F). It provides better flammability and volatility, improved stability, but has a higher viscosity at low temperature than MOBIL™ AERO HF. It meets the “super-clean” requirements. It is intended primarily for US Military aircraft. It is approved as a NATO Code Number H-537 fluid.

For additional information please consult the supplied documentation.

Sourced from quality producers, AVIATIONEU NEW ERA general purpose brass check valves with nylon cover are suitable for use in hydraulic, heating, air conditioning and pneumatic installations in vertical, horizontal or oblique positions. They are manufactured in accordance with ISO 228 standard and they are available in different sizes. Sold in pieces.

AMP Flexi Block Modular Terminal is used for assembles of terminal blocks to custom requirements and it is avalable in Users and Professional complete kits. 

Users Kit consists of 25 pieces Flexi-BLock terminal block, 12 end stops and two 12 in pieces of track,

Professional Kit - No. 6 kit consists of 100 ea. P/N 604101-1 block assemblies, 25 ea. of P/N 604111-1 end stops and 2 ea. track 3 ft. long.

WELDON J Series FAA-PMA fuel pumps work with different fluids including gasoline, jet fuels, diesel fuel and oils. They can be used (depending on selected pump) for a variery of applications including emergency fuel boost, priming injected engines and others.

Appearing prices include core charges for no core reurn.

SAE-AS1038/AN833 series elbow 90°, flared tube to flared bulkhead fittings are available in different materials, tube outer diameters and thread sizes in inches. AN833 series fittings are superseded by the respective fittings of SAE International, standard AS1038 series.

Materials include: Carbon Steel, Aluminum Alloy, Corrosion Resistant Steel (CRES), Titanium Alloy

The following Code Letters after the AS1038 indicate the composition of the fitting:

No code letter in part number for Carbon Steel

Code letter “D” for Aluminum Alloy (except 7075-T73)

Code letter “J” for CRES, type 304

Code letter “K” for CRES, type 316

Code letter “S” for CRES, type 347

Code letter “T” for Titanium Alloy 6AL-4V

Code letter “W” for Aluminum Alloy 7075-T73

For example, AS1038D fittings indicate that these are made from Aluminum Alloy.

The remaining part in the fitting Part Number indicates dimensions i.e. the tubing outer diameter (O.D.) and the thread of the fitting (in inches).

For example, AS1038D0606 fitting is made from Aluminum Alloy with a tubing outer diameter (O.D.) 3/8" and a 0.5625-18 UNJF thread. The corresponding fitting in AN821 series would be AN833-6D.

NIC INDUSTRIES, Inc., manufactures industry-leading coatings under CERAKOTE®, PRISMATIC POWDERS®, and PERFORMANCE MATERIALS® brands, operating as separate NIC divisions. NIC coatings serve a wide range of applications in different industries from aerospace, defence, electronics, marine, to automotive, manufacturing, energy, industrial, sporting goods, and more. 

NIC CERAKOTE® state of-the-art coating technology is an extremely durable, heat, abrasion and chemical resistant ceramic epoxy coating. CERAKOTE® While Cerakote has become the firearm industry standard but they  are widely used in industries ranging from automotive to aerospace and from consumer and interior décor to defense. For aerospace applications, CERAKOTE® provides a single layer coating, 0.25-2.0 mils thin, providing resistance to hydraulic fluids, fuels, solvents, acids, de-icing products, and commercial strength disinfectants. 

NIC CERAKOTE® Ceramic Coatings are offered in different series to cover diverse application requirements. The Elite Series of Oven Cure coatings is perfect for applications requiring tight tolerances and typically eliminates the need for masking. Commonly used in applications for aerospace, defence, electronics, marine, manufacturing, and more. The H Series Oven Cure coatings are used in applications for defence, electronics, marine, and construction. The C (High Temperature) Series Air Cure coatings are formulated to withstand temperatures up to1,800˚F and they are commonly used in applications for aerospace, alternative energy, defense, industrial, manufacturing, and oil & gas. CERAKOTE® V (High Temperature) Series Oven Cure coatings withstand temperatures up to 1,800˚F and are commonly used in aerospace, automotive, energy, industrial, and manufacturing. In addition, CERAKOTE® Specialty Series Air & Oven Cure coatings are offered such as performance based clear coatings, low thermal conductive coatings, used primarily on top of pistons, engine valves and combustion chambers or high thermally conductive coatings, used primarily for radiators, intercoolers, and heat exchangers.

Starter and Pro Kits combining coatings and essential tools and eqipment for beginners and professional applicators respectively are also offered for trying CERAKOTE® coatings in different applications.

For additional information on NIC CERAKOTE® coatings please consult the Product Description section and the supplied documentation.

Tempest® Spin EZ® FAA PMA approved aviation oil filters are manufactured by Aero Accessories®, LLC. Apart Spin-EZ® gasket oil filters the company also manufactures other pneumatic products such as Tornado™ dry air pump.

Product Features:

Improved Nut Welds – Nut welds are so strong that the can will distort without breaking the welds.Tempest Original filters can be installed without the danger of installation nuts falling off.

Improved By-Pass Valve for Continental® Engines – Meets TCM by-pass specification of 12-14 psi, reducing risk of premature bypass that can result in unfiltered oil flowing to your engine.

PC Housing (Patent Pending) – the only filter to incorporate a housing for the by-pass valve to prevent the restriction of the oil outlet should a failure of the by-pass valve occur.

Burst strength of 600 psi – Significant improvements to the roll seam process used on the bottom of the can substantially improved the design burst strength of the Tempest Spin EZ oil filter to over 600 pounds per square inch, exceeding the ARP 1400 standard by 50 percent. Extra strength gives added assurance that Tempest oil filters are made to withstand the harshest operating conditions.

Full Pleat Media – The resin-impregnated, cellulosic, full pleat media is designed for uniform flow and collapse resistance.  312 square inches is the most in aviation oil filters.

Tempest® Spin EZ® oil filters are sold individualy but also offered as economical, convenient, and easy to handle six and twelve packs. Spin EZ® Solid Lubricant, aTempest Spin EZ oil filter’s proprietary solid lubricant is also available allowing for easy removal of the filter. Unlike oil, grease or DC4 compound that leave the filter seemingly “bonded” to the engines mount pad, making it nearly impossible to remove, Tempest® Spin EZ solid lubricant won't extrude or squirt out from under the seal.

PLease consult the supplied documentation for additional information.

AN315/NASM315 Series hex plain nuts are manufactured from steel and cadmium plated per QQ-P-416A, Type II, Class 3, corrosion resistance steel or aluminum alloys. The AN315 nuts have been superseded by NASM315 Series. Similar to common nuts  but with a rugged construction they are designed and built with aviation grade materials and to specific aviation design specifications. They can carry the same high tension load as the AN310 castle nuts and require an auxiliary locking device such as a check nut or lock washer. 

Sourced from quality producers, the AN315/NASM315 Series hex plain nuts are offered as part of AVIATIONEU NEW ERA product lines in different thicknesses and thread sizes in inches. The following letters are used to designate specific types of airframe nuts:

"C" before dash number for corrosion resistance steel nuts

"D" before dash number for aluminum-alloy nuts

"L" after dash number for left-hand thread

"R" after dash number for right-hand thread

For additional information please consult the supplied documentation or contact us.

Certification Details:

AN315 (REV. 10) (NOTICE 2)., AIR FORCE-NAVY AERONAUTICAL STANDARD: Nut, Plain, Castellated, Airframe (23 SEP 2002) [S/S BY NASM315]., AN315 REV. 10, dated 29 DECEMBER 1972, is hereby canceled and superseded by NASM315. The Part Identification Number (PIN) for AN315 REV. 10 and the part number for NASM315 are identical. The part numbers have not been changed.

AVIATIONEU NEW ERA Stainless Steel Plain Washers are made of Stainless Steel 304 or 316 (depending on P/N) with a bright surface treatment. They are produced in accordance with DIN 125 (ISO 7089) standard. Sourced from certified manufacturers these washers are offered in competitive prices and they are available in different sizes on the basis of their Clearance (Hole) Diameter/Outer Diameter/Thickness in mm.Sold in packs of 500, 50 or 25 pieces depending on the size of the washers. The number of pieces included in each pack is mentioned after "PK" designation.

Nylaflow®, Nylon Tubing is a high-quality pressure tubing, available in several types. Nylaflow® tubes are tough and durable, offering low friction and high flexibility. Offered by different producers, Nylaflow® tubing is suitable for applications that require toughness, resilience, a small bend radius and high burst strength. Nylaflow® tubing offers superior burst strength compared to vinyl, ethylene, and urethane tubing and it is a high performance, long-lasting alternative to copper, rubber, aluminum and other types of plastic tubing. Its high burst rating makes it a common solution pneumatic and hydraulic lines. Nylon has excellent chemical resistance and can withstand exposure to relatively high concentrations of harsh chemicals at elevated temperatures. Its extremely smooth inner surface resists abrasion and wear and makes for a low coefficient of friction. It is often used in corrosive environments because of its excellent resistance to harsh chemicals. 

Nylaflow® tubing comes in different types.

Types T (Thin Wall) and H (Heavy Wall) are the most common Nylaflow general purpose tubing made from type 6/6 nylon. FDA compliant for use in food or beverage handling applications also meeting 3A sanitary standards. The High performance of this Nylon tubing makes it perfect for applications that require durability, resilience, a small bend radius, and high burst strength.

Type LM tubing is a premium high flex tubing available in two types: natural or black, which exhibits improved light stability. Type LM offers excellent chemical resistance and low moisture absorption. Often used in automotive fuel lines, lubrication lines, air lines, and vacuum environments.

Type LP tubing is a low pressure, general purpose type 6 nylon tubing with carbon added for UV stability. 

Nylaflow® nylon tubing is available with custom markings, cut to length and custom packaging. It can be cut with a sharp knife and flared hot or cold. They are odorless, tasteless and noncorrosive.

Typical applications of Nylaflow® tubing include airlines, grease lines, vacuum lines, and hydraulic lines.

DOOSAN genuine filters are designed and developed specifically for DOOSAN machines. They provide:

- Outstanding filtration efficiency and low maintenance costs,

- Excellent DHC (Dust Holding Capacity) and stable filtration performance,

- Optimized design for DOOSAN machines and outstanding quality proven under harsh testing conditions,

- Longer lifespan with extensive filtering area,

- Maximize machine up-time and increases productivity, and

- Maximize the residual value of the machine.

DOOSAN genuine air filters exhibit a higher filtration efficiency and Dust Holding Capacity (DHC) than non genuine replacements in the market.

DOOSAN genuine oil filters feature:

- Strengthened Housing protecting the filter with superior durability against external impact,

- High-quality 2-layer media maximizing the filtration efficiency and DHC while at the same time protecting engine parts and extending the lifespan of the filter,

- Wire Mesh maximizing the filtering area and DHC by preventing pleats from sticking together,

- Spiral center tube ideal for working under high pressure,

- Reinforced Seam offering high-pressure and longcycle impulse resistance while it strengthens the filter and protects the engine,

- End Cap with superior bonding preventing the inflow of contaminants.

Direct replacements to DOOSAN filters are offered from different quality filter makers including MANN, HENGST, DONALDSON, FILTRON and others. These filters are compatible with DOOSAN filters in form, fit and function.