Flared tube coupling nuts conforming SAE International standard AS5175 are used for a leak-free solution on aircraft and other applications replacing respective AN818 parts. They are offered  as part of our own (AVIATIONEU NEW ERA) product lines in different materials and grades and multiple thread sizes to suit application needs. Material Code Letters in the part numbers indicate the composition of the fitting (No code for Steel 1137 or 4130, "D" for Aluminum alloys (except 7075-T73), "J" for 304 Stainless Steel (CRES 304), "K" for 316 Stainless Steel (CRES 316), "T" for Titanium 64AI-4V or "W" for Aluminum 7075-T73. These nuts are designed to be used with AS5176 and MS20819 sleeves. The 2 digits after the series code indicate the tubing outer diameter (O.D.)  in inches. Finish code “V” in the PN indicates high purity Aluminum coating for “W” or “D” fittings. Depending on their Part Number they are sold in pieces but also in packs a with specified number of fittings indicated after the letters "PK" in the product reference number (SKU).

Note: In SAE AS standards for new designs, aluminum fittings with material code letter D in their Part or Identifying Number (PIN) are replaced by those with material code letter W for Aluminum Alloy 7075-T73 providing a higher tensile strength.

AN840 series of pipe thread hose nipple fittings are offered as part of our own (AVIATIONEU NEW ERA) portfolio of fittings. Sourced from quality producers these fittings can be furnished in aluminum or brass in different tube internal diameters and thread sizes in inches.Aluminum are designated by the letter "D" after the suffix number of the product reference number (SKU).

Thermoplastic hydraulic hoses are used in certain hydraulic control applications where low volumetric expansion properties are desired for more precise actions or control. Such applications include those for precision gauging, pilot lines, steering lines, grease systems, as well as other applications which cannot be subject to conductivity (use around power lines) or where moisture cannot be present, such as for spray foam. As with "rubber" hydraulic hose, not all brands of thermoplastic hydraulic hoses are built the same even though they may meet the same SAE specifications. Higher end brand hoses will typically be made to higher tolerances, better compounds, better resistance to various factors, added durability, enhanced engineering methods, and additional assurance of a proven system. With leading, innovative manufacturers such as Aeroquip, the market has seen improvements in hose design - such as more flexibility, lighter weight, higher temperature compounds, tougher covers, less manufacturing defects, and overall more durable products.

ΕΑΤΟΝ SYNFLEX® thermoplastic hose and tubing has been replacing rubber hose or metal tubing designs offering customers a number of benefits, including flexibility, durability, abrasion resistance, lighter weight materials, superior chemical resistance, variety of colors, high pressure capability and extended product performance.

Each component of the SYNFLEX® hose assembly system is compatible with other approved Eaton components to which it relates ensuring a complete hose assembly system. Component compatibility, along with the use of quality components, insures the production of reliable hose assemblies when properly assembled. Intermixing of fittings and hose not specifically engineered and designed for use with each other and Eaton equipment is not recommended and may result in the production of unsafe or unreliable hose assemblies. This can result in hose assembly leakage, hose separation or other failures which can cause serious bodily injury or property damage from spraying fluids, flying projectiles, or other substances. The ΕΑΤΟΝ warranty is limited to apply only when approved ΕΑΤΟΝ hose fittings and compatible ΕΑΤΟΝ SYNFLEX® hose are used with Eaton assembly equipment.

Hoses are priced and sold by the foot unless otherwise specified. Fittings can be separately purchased in pieces.

For additional information on different products please consult the supplied documentation or contact us.

EATON HANSEN FF (Flat Face) Series quick disconnect couplings, now part of DANFOSS product portfolio, are specifically designed for those applications where quick and easy connections and no-spill performance are essential. The FF Series is ideal for use when global interchangeability with other manufacturers is important and is available in sizes from 1/4” through 2” to best meet your specific size requirements.

Product Features:

• Meets or exceeds the ISO 16028 standard

• Push-to-connect

• Standard sleeve lock prevents accidental disconnection

• Color identification rings available to help prevent crossing of lines

• Standard Material: High-resistant carbon steel with Guardian Seal™ plating, a whole new level of corrosion resistance with minimum 720 hours RR protection

• Guardian Seal™ plating

• Nickel-free

• Solvent-free

• Meets Global RoHS, ELV and REACH requirements 

• Standard Seal Material: NBR+AU

• Available seal options: NBR+AU, FKM, EPDM, HNBR (upon request)

Applications:

• Hydraulic and Fluid Transfer

• Construction equipment

• Agricultural equipment

• Utility vehicles

• On-Highway vehicles

• Stationary in-plant hydraulics and fluid transfer

• Interchangeable with HTMA couplings in the 3/8” size

For additional information please refer to the supplied documentation or contact us.

Note: Special Order items. Non-Cancellable/Non-Returnable Upon Order Placement (NCNR).

Nylaflow®, Nylon Tubing is a high-quality pressure tubing, available in several types. Nylaflow® tubes are tough and durable, offering low friction and high flexibility. Offered by different producers, Nylaflow® tubing is suitable for applications that require toughness, resilience, a small bend radius and high burst strength. Nylaflow® tubing offers superior burst strength compared to vinyl, ethylene, and urethane tubing and it is a high performance, long-lasting alternative to copper, rubber, aluminum and other types of plastic tubing. Its high burst rating makes it a common solution pneumatic and hydraulic lines. Nylon has excellent chemical resistance and can withstand exposure to relatively high concentrations of harsh chemicals at elevated temperatures. Its extremely smooth inner surface resists abrasion and wear and makes for a low coefficient of friction. It is often used in corrosive environments because of its excellent resistance to harsh chemicals. 

Nylaflow® tubing comes in different types.

Types T (Thin Wall) and H (Heavy Wall) are the most common Nylaflow general purpose tubing made from type 6/6 nylon. FDA compliant for use in food or beverage handling applications also meeting 3A sanitary standards. The High performance of this Nylon tubing makes it perfect for applications that require durability, resilience, a small bend radius, and high burst strength.

Type LM tubing is a premium high flex tubing available in two types: natural or black, which exhibits improved light stability. Type LM offers excellent chemical resistance and low moisture absorption. Often used in automotive fuel lines, lubrication lines, air lines, and vacuum environments.

Type LP tubing is a low pressure, general purpose type 6 nylon tubing with carbon added for UV stability. 

Nylaflow® nylon tubing is available with custom markings, cut to length and custom packaging. It can be cut with a sharp knife and flared hot or cold. They are odorless, tasteless and noncorrosive.

Typical applications of Nylaflow® tubing include airlines, grease lines, vacuum lines, and hydraulic lines.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different hoses for water, heat, air intake, protection, form, connecting, low pressure and others & related fittings are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU). ROTAX engine hoses are generally sold in meters and appearing prices are per meter but some hoses of specific dimensions and fittings are sold in pieces.

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

GATES industrial hoses are more than just flexible, reinforced tubes. GATES brand name is synonymous with engineered state-of-the-art quality hoses, couplings and accessories to cover an extensive range of application requirements ranging from water to welding, petroleum to pressure washing, and from mining to material handling. Every hose system component is tested under harsh environmental conditions and rigorous operational demands to ensure your Gates solution maximizes your value and minimizes your downtime. GATES couplings & ferrules feature simple coupling design and revolutionary performance. A brief overview of GATES hoses and couplings is provided at the Product Description section. For additional information please consult the supplied documentation or contact us.

EATON AEROQUIP® brand name represents quality and innovation for aerospace and other industrial applications with a wide range of hoses, fittings, couplings and connectors available to cover application requirements. Following the acquisition of Eaton’s hydraulics business by DANFOSS, EATON AEROQUIP® products form now part of DANFOSS product portfolio. Made from different materials (S Steel, B Brass, C Stainless steel or D Aluminum alloy) DANFOSS EATON AEROQUIP® adapters & swivel Joints come in different types  and sizes. For additional information please consult the supplied documentation or contact us.

BAND-IT Junior® series smooth ID hose clamps come in a wide choice of widths, thicknesses and inside diameters in Imperial and Metric systems. They are made from different materials such as 201 austenitic chromium-nickel-manganese Stainless Steel, 316 Stainless Steel or Galvanized Carbon Steel (GCS). With their leak resistant design BAND-IT JS® clamps out-perform the other common clamping methods of hose sleeve clamping. They reduce the risk of leaks especially when used on thin walled hoses, ensuring that hose sleeving stays in place through the life of the sleeve. Their low profile buckle design reduces the clearance needed around the hose and has no sharp edges or tail that could cause injuries. Available for hose assemblies up to 8" outside diameter.

BAND-IT Junior® clamps are also offered as preformed clamps used in a wide array of agricultural and industrial applications. Preformed clamps are  made from Alloy 625, a nickel-chromium-molybdenum alloy known for its high strength, high toughness and excellent corrosion resistance. They are vibration resistant and require no hammering or crimping to complete installation. Clamps automatically lock in place under full tension in one simple level movement of the clamp tool(*).

BAND-IT JS® Clamp Features:

Vibration resistant lip lock design. No hammering or crimping

Unique buckle nest and smooth ID design reduces leak paths

Double wrapped steel bands for additional strength

Various materials for corrosive environments

Sold in packages with specified number of clamps per package indicated after the letters "PKG" in the product reference number (SKU).

For more information please refer to the product specifications or contact us.

(*) Note: BAND-IT Junior® Preformed Clamps should be installed using BAND-IT C001 Tool and J001 Junior® Adapter. 3/8" clamps can also be installed using the BAND-IT J020 POK-IT Tool.

AN822 90° Flared Tube & Pipe Thread Elbow Fittings are superseded by those of Military Standard MS20822 and these are superseded in turn by SAE-AS5195 standard. These fittings are made from different materials such as carbon steel, aluminum or corrosion resistant steel (stainless steel), sourced from quality manufacturers and offered as part of our own labelled (AVIATIONEU NEW ERA) product lines in different tube outer diameters and NPT thread sizes in inches. The fitting composition is designated by a code letter after the dash number in the part number as follows:

No letter for Carbon Steel

"B" for Copper Alloy

"D" for Aluminum Alloy

"J" for CRES, Class 304

"K" for CRES, Class 316

"S" for CRES, Class 347

"W" for Aluminum Alloy 7075-T73

For additional information please consult the supplied documentation or contact us.

DANFOSS EATON SYNFLEX® 1300 Series composite wall tubes are designed for pneumatic instrument control systems. Their fully bonded polyethylene/aluminium construction combines the advantages of both metal and plastic tubing.

Their outer, high density polyethylene layer is impervious to most chemical environments and enables SYNFLEX® 1300 tubes to outperform practically all types of unprotected metal tubing.

Product Features:

• Combine the advantages of both metal and plastic tubing

• Very light (5 times lighter than a standard instrument control tubes)

• Provide neat looking bends without special bending tools

• Corrosion and chemical environment resistant

• Excellent chemical compatibility

• Tubing contents dry thanks to aluminum barrier

• Enable direct burial w ithout additional protection (whatever the installation)

• Connection with standard compression fittings

• 25, 75,100m standard lengths

• Standard color: black, other colours on request

• Also available with "Halogen free" jacket

Applications

• Pneumatic instrumentation and control lines located in very wet or moist environments

• Air and gas sampling

• Corrosive environments

• ID surface best suited for air

Construction

• Polyethylene/Aluminum composite

Temperature range

• -40 °C to 80 °C

Flared sleeve fittings are cylindrical metallic parts designed to be used on tubing to back up the flared end and provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.

Coupling sleeves conforming to SAE International, standard AS5176 standard replace respective MS20819/AN819 sleeves and they are offered as part of our own (AVIATIONEU NEW ERA) product lines. Sourced from quality producers these fittings are manufactured in different materials including 4130 Steel, Copper, Corrosion Resistant Steel (CRES) and Aluminum & Titanium Alloys. Material Code Letters in the part numbers indicate the composition of the fitting.

Depending on their Part Number they are sold in pieces but also in packs a with specified number of fittings indicated after the letters "PK" in the product reference number (SKU).

The  PARKER HANNIFIN (Hose Products Divisionn) offers the following series of Medium & High Pressure hydraulic hoses compatible with No-Skive fittings.

- BCH Series braided and SX Series spiral hoses meeting international technical standards. More recently developed they are intended for demanding small and medium OEMs and general distribution,

- ELITE No-Skive braided and Parkrimp® No-Skive spiral hoses, exceeding the standards and highly appreciated in the very demanding MRO and OEM markets.

- GLOBALCORE™ State-of-the-art  hose product range, exceeding the newest ISO 18752 and providing technical and economical excellence to the most demanding customers. 

Good, Better, Best classification system is used for easier hose and fitting understanding and selection with superior performance of Best hoses versus their Better and Good counterparts including: 

- Bend radius up to 50% smaller

- Flexibility (bending force) up to 30% higher

- Weight up to 20% lower

- Dimensions up to 25% smaller area

- Impulse resistance and service life up to four times higher

- Working temperature up to 25% higher

Agriculture is one of the typical markets and applications where Good hoses and fittings are the preferred product selection.

For additional information please refer to the supplied documentation or contact us.

The EATON AEROQUIP FC300 are AQP elastomer hoses with a blue, abrasion-resistant fabric cover with single wire braid reinforcement over a synthetic rubber inner tube for longer life. The FC300 hoses are designed for high pressure fluid applications such as power steering, hydraulics, air, fuel, lubricating oils, fire resistant hydraulic fluids and other industrial fluids. They are also suitable for biodiesel use up to B20 and max temperature of 212°F (100°C). Available in different internal diameters in inches and for use in different maximum operating pressures (psi). Priced and sold by the foot.

Indicative Applications:

Power steering lines

Hydraulics

Air

Gasoline

Fuel

Lubricating oils

Over the wall air tool

Dot-approved air brake

Max operating pressure is 2250 psi

Operating Temperature Range

-55°F to +302°F (-49°C to +150°C)

Air not to exceed +250°F [+121°C]

Notes: 

(1) The FC300 Hose only works with FC300 steel fittings (to be ordered separately). Easily assembles with a bench vise and/or wrenches.

(2) FC300-32 and FC300-40 hoses DO NOT meet SAE 100R5 pressure with reusable fittings. FC300-32 is rated to 350 psi with crimp fittings. 

EATON products are known for their quality and innovation in aerospace and other industrial applications with a wide range of hoses, fittings, couplings and connectors available to cover application requirements. Following the acquisition of Eaton’s hydraulics business by DANFOSS, EATON hydraulic products form now part of DANFOSS product portfolio.

DANFOSS EATON WINNER® Series wire reinforced synthetic rubber hoses are constructed by a synthetic rubber tube with one or two wire braid reinforcement and a synthetic rubber cover. These hoses feature an operating temperature range of -40°C to +100°C / -40°F to +212°F. They can be used for a wide range of applications in hydraulic systems with petroleum and waterbased fluids as well as for general industrial uses. Available in different tubing sizes and internal diameters in inches. Priced and sold in meters unless otherwise stated.

EATON WINNER® Series include the following hoses:

The EATON WINNER® EC110 hoses which have one wire braid reinforcement and meet EN 853 1SN specification.

The EATON WINNER® EC115 hoses with one wire braid reinforcement and compliance with EN 857 1SC specification.

The EATON WINNER® EC210 hoses wiyh two wire braid reinforcement meeting EN 853 2SN specification.

The EATON WINNER® EC215 hoses with two wire braid reinforcement meeting  EN 857 2SC specification.

For additional information please refer to the supplied documentation ot contact us.

DANFOSS EATON SYNFLEX® subsea hoses and bundles are built to meet and exceed the most demanding industry requirements. Their rigorous hose qualification ensures long hose service life while their robust construction enables them to withstand high pressures. They are offered in long, continuous lengths to cover requirements of diverse applications all over the world.

At its core, SYNFLEX® High Pressure hose is a smooth, seamless, continuous extrusion of Nylon 11 Besno P40 TLO. The hose is reinforced with premium aramid fiber and jacketed with a highly UV resistant thermoplastic for long term aging and resistance to hydrolysis. Long continuous lengths are available for subsea bundles and single line applications. Available in 3,000, 5,000, 10,000, and 15,000 psi working pressures these hoses are lightweight, easy to install and assemble, and available in multiple sizes and long continuous lengths. Used in a wide range of applications including Hydraulic flying leads, workover umbilical components, hot lines, chemical, water and nitrogen injections and  subsea blow out prevention (BOP) bundles and hot lines enabling faster and more effective response to subsea events.

Like in other SYNFLEX® hoses, approved Eaton components are offered to ensure complete hose assembly systems. 

Hoses are priced and sold by the foot unless otherwise specified. Fittings can be separately purchased in pieces.

For additional information on different products please consult the Product Description section, supplied documentation or contact us.

NYLO-SEAL tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They are furnished complete with nut/sleeve assemblies, made of acetal copolymer. Since the sleeve snaps into and is retained by the nut there is no fumbling for a loose sleeve. Just insert tube into the fitting and tighten the nut 2 to 2-1/2 full turns. Note: The most frequently used combination of tube and pipe sizes are 1/4" Tube x 1/8" Pipe and 3/8" Tube x1/4" Pipe.

Textron Lycoming Engine Part. Ball, D: 0.6875. FAA Certified.

EATON AEROQUIP® brand name represents quality and innovation for aerospace and other industrial applications with a wide range of hoses, fittings, couplings and connectors available to cover application requirements. Eaton’s hydraulics were acquired by DANFOSS and form part of DANFOSS product portfolio.

DANFOSS EATON AEROQUIP® AE246/AE446/AE546/AE846 Series Hoses are based on AE246 advanced technology designed, tested and proved high pressure 3000 psi PTFE hose with Hi-Pac®braid reinforcement containing densely packed small diameter wires braided over a minimum thickness Teflon tube. This reinforcement offers up to 50% lighter in weight while the wires absorb stress more uniformly resulting in a stronger wire braid with less metal. Available in different tubing sizes and internal diameters in inches. They meet or exceed AS1339 performance requirements.

The AE546 series hoses feature an integral braided polyester chafe guard (manufactured by braiding polyester yarn onto existing hose styles) while those of  AE246 series come with an integral silicone firesleeve. 

The AE446 and AE846 Series hoses are AE246 high pressure teflon hoses with an integral silicone asbestos free fire protection (sleeve), adhering directly onto the hose metal braid and end fittings to form a smooth, tight bond.

Common end fittings used with these hoses include CRES fittings of -3 to -12 thread size, flared (MS33656), flareless (MS33514) or BSP type offered in straight, 45 deg and 90 deg styles.

“Super Gem” Reusable Flared Fittings can also be used with these hoses. They consist of 3 pieces: a socket, sleeve and nipple assembly.Made from corrosion resistant materials elbow fittings are available in standard, 45°, and 90° styles. Mate with AS4395 and AS33514 end connections. These service proven flared fittings provide permanent protection against leakage, even after high temperature aging and pressure impulsing to 250,000 cycles or more. This is due to the separation of the sealing function from the retention function.

The AEROQUIP® hoses are priced and sold by the foot unless otherwise specified. Fittings can be separately purchased in pieces.

For additional information please consult the Product Description section and the supplied documentation.

POLY-FLO tube is a flexible, economical thermoplastic tube fabricated from high molecular weight polyethylene for improved strength. The base resin has the greatest resistance to environmental stress cracking of all the regular polyethylenes. Used for instrument or pneumatic lines. Use Nylo-Seal fittings (259-N inserts are required), nylon or polyethylene hose fittings such as 0710-153. It meets A.S.T.M. D-1248-60T, Type 1, Class A, Grade 4 and Federal Specification LP- 590, Type 2, Grade 7. Color:- natural.

POLY-FLO tubes are sold by the foot.