AVIATIONEU NEW ERA Aircraft Tires & Tubes
  • AVIATIONEU NEW ERA Aircraft Tires & Tubes

AVIATIONEU NEW ERA Aircraft Tires & Tubes SKU: AVEUNE-ACFT-TIRE/TUBE

A wide range of tube less (TL), tube type (TT) tires and matching tubes are now offered under AVIATION NEW ERA brand for use in main and nose wheel applications in general aviation, commercial, military aircraft and other projects. Tires are available in different sizes, thread pattern types, rim diameters, ply ratings to meet respective rated load and pressure requirements of intended applications. Aircraft tires are typically classified into different categories or "types"with different size and strength designations used and specified in the tire SKU. For additional information please refer to the Product Description section.

For tube type tires, matching tubes with straight or bent valves are also offered. All tires and tubes are supplied with a standard Certificate of Conformance. If additional certification is required please specify at order placement as this may apply additional cost.

Mfr. P/N & Title
Delivery: Usually up to 45 working days for items requiring backordering

A wide range of tube less (TL), tube type (TT) tires and matching tubes are now offered under AVIATION NEW ERA brand for use in main and nose wheel applications in general aviation, commercial, military aircraft and other projects. Tires are available in different sizes, thread pattern types, rim diameters, ply ratings to meet respective rated load and pressure requirements of intended applications. Aircraft tires are typically classified into different categories or "types"with different size and strength designations used and specified in the tire SKU. For additional information please refer to the information on tire size and strength nomenclature below.

For tube type tires, matching tubes with straight or bent valves are also offered. All tires and tubes are supplied with a standard Certificate of Conformance. If additional certification is required please specify at order placement as this may apply additional cost.

Designation of Tire Size & Strength

For Type III tires, generally used in low pressure service operations, size is designated by N - D where "N"  indicates the nominal section width of the tire and "D"  the rim diameter.

For Type VII high pressure tires used on jet aircraft, size is designated by M X N where "M"  indicates the nominal overall tire diameter and "N"  the nominal section width.

A Three Part Nomenclature is also used as follows:

M X N - D or M X N R D

where

"M"  indicates the nominal overall tire diameter

"N"  indicates the nominal section width

"D"  indicates the rim diameter

In INCH code tires designators M, N & D are in inches.

In METRIC code tires designators M, N  are in millimeters & D is in inches.

The "-" and "R" are sometimes referred to as the construction code. These tires are designed for high speed/high load aircraft.

Sometimes tire designators are preceded by the letters "B", "H" or "C". These are special designators used as follows:

"B" tires have a rim width to the tire section ratio of 60% to 70% and a 15 deg. bead taper.

"H" tires are the same except they have a 5 deg. bead taper.

The letter "C" designates a cantilever type tire. It has a very narrow rim width, a section ratio less than 60% and a 15 deg. bead taper.

Tire strength is indicated by the ply rating, the number of plies of reinforcing materials embedded in the rubber during the construction process to enhance the tire strength.

AVEUNE-TR-1050X350-16PLY/TL

Data sheet

Certification/Approval
Certificate of Conformance
Taric
4011300010 New rubber pneumatic tires for use on civil aircraft
Unit of Measurement (UOM) / Sale
Each (ea.)

Specific References

upc
4011300010