AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. It is  frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and other equipment, pressure vessels, treadplate, containers, and applications.  Alloy 5052 has a good marine atmosphere corrosion resistance of saltwater and excellent workability. Main features of this alloy include: non heat-treatable, excellent weldability, high corrosion resistance, smooth surface, lightweight, high-tensile strength.

Extruded bars/rods from 5052 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 5052 H112 Temper square bars are offered in different dimensions 5 mm × 5 mm (13/64" x 13/64") up to 150 mm × 150 mm (5-29/32" x 5-29/32") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

Machine screws are one of the more widely used products among dozens of standard fastener types. They can be either coarse-threaded or fine-threaded, and are usually available with a wide range of head types. Usually stronger than many other screw types, they are used for fastening metal parts and panels securely together in a range of construction and other applications including aerospace, machinery, vehicles, engines, tool assemblies, electronic devices, and large-scale industrial equipment. 

Sourced from quality producers,  machine screws are offered as part of our own branded (AVIATIONEU NEW ERA) product lines conforming to aerospace/military or industrial standards/specifications.  They come in different sizes, head types, materials and thread gradings. Countersunk screws allow the head of the screw to sit flush with or below the surface of the surrounding material. They may also be used to remove the burr left from a drilling or tapping operation thereby improving the finish of the product and removing any hazardous sharp edges.

AVIATIONEU NEW ERA MS35206 and MS35207 series of machine (non structural) screws are mil spec pan head cross recessed (Phillips) screws, manufactured from carbon steel and are cadmium plated to specification QQ-P-416, Type 2, Class 3. MS35206 series machine screws feature 60,000 psi min. tensile strength and can be used as replacements for AN526 truss head & AN515 round head screws. MS35207 series machine screws are fine threaded have a minimum tensile strength of 55,000 psi and replace the AN507R series. Both MS35206 and MS35207 series machine screws are offered in different diameters, thread sizes and lengths in inches and they are sold in pieces. For more information, please refer to the individual product presentations, the supplied documentation or contact us.

The AL2024 aluminum alloy (with copper as the primary alloying element) also known as aerospace grade aluminum, is commonly used in aircraft structural applications due to its high strength and fatigue resistance.  It is suitable for applications requiring high stress and strain resistance. The AL2024 aluminum alloy is stronger but less versatile than AL6061 alloy, which is more corrosion resistant, easier to weld, and more suited to machining, but less strong than the AL7075 alloy.

AL2024 aluminum alloy sheets come as Annealed (O Temper) without heat treatment or as heat treated to attain their maximum strength. Heat treated sheets are available in vatious T tempers (such as T3,T4,T5,T6 and T651) for use in a range of aviation and industrial applications.

2024-O CLAD (ALCLAD) Aluminum alloy sheets(*) are offered as part of AVIATIONEU NEW ERA product lines and they consist an excellent choice when high corrosion resistance is needed. Sourced from quality producers, these sheets  are readily formed in the annealed condition and may be subsequently heat treated. They feature good machinability and can be machined to a high finish. They are offered in different thicknesses and specific widths and lengths in inches. They comply with AMS and ASTM specifications.

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the individual product presentations or contact us for quotation.

(*) ALCLAD is a corrosion-resistant aluminium sheet formed from high-purity aluminium surface layers metallurgically bonded (rolled onto) to high-strength aluminium alloy core material. As an enhanced sheet for fuselage applications, ALCLAD offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. ALCLAD also offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy.

AVIATIONEU NEW ERA ASTM A193 Grade B6 Series stainless steel stud bolts are manufactured from the ferritic grade AISI 410 stainless steel and can be heat-treated and machined to minimum of 110-ksi or 760 Mpa tensile strength. Like other fasteners in this seies, apart from their high tensile strength, they exhibit excellent resistance to corrosion, durability as well as a long functional work life. They can be used in different applications in industries that demand high tensile strength and corrosion resistance. Sourced by certified manufacturers they are competively priced and offered in different diameters and lengths. Sold by the piece (pc.) in increments of 10 pieces with Minimum Order Quantity (MOQ) 100 pieces. Appearing price is for reference only and differentiates based on wanted bolt sizes. Please contact us for a quotation.

AL2024 is an aluminium alloy, with copper as the primary alloying element. It is used in applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. It comes in different tempers, O (Annealed)without heat treatment or T (heat treated). Since corrosion resistance is relatively low, 2024 is commonly used with an anodized finish or in clad form (specified as CLAD or ALCLAD) with a thin surface layer of high purity aluminum metallurgically bonded to the aluminium alloy core material.

AL2024 bars/rods are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other aluminum and steel alloys (e.g. AL5052, AL6061, AL7050, AL7075, ST4130, ST4140 etc.). Like other AL2024 products these bars/rods can be used in an extensive list of applications in aerospace, automotive and many other industrial sectors such as aircraft structural components, aircraft fittings, hardware, truck wheels and parts for the transportation industry.

AVIATIONEU NEW ERA 2024-T351 aluminum rectangular bars/rods are sourced from quality producers and offered either in different dimensions and pre-cut lengths in inches or cut to order (CTO) lengths in feet  to meet application requirements. The pre-cut bars/rods are cold finished and comply with ASTM -B211, AMS -4120 & AMS -QQ-A-225/6 specifications while those with cut to order lengths meet AMS-OQ-A-225/5, AMS 4120, ASTM B211 and UNS A92024 specifications.  Appearing prices are per piece for pre-cut bars/rods and per foot for those cut to order. 

For additional information, please refer to our Brief Guide on Aluminum Grades & Temper Designations,  the individual product presentations or contact us.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

Inconel® is a registered trademark of Special Metals Corporation (SMC) for a family of austenitic nickel-chromium-based superalloys. Inconel® suitability for extreme pressure and heat environments and corrosion resistance allow its use in most demanding operating conditions. Even compared to stainless steel, Inconel® has an incredibly high tolerance for extreme heat, and doesn’t lose as much tensile strength at 2,000°F as most steel alloys.  Inconel® alloy comes in different grades (variations) such as 600, 601, 617, 625, 686, 690, 693, 718, 725, 751, 783 and others. It also used in the production of pipes, tubes, sheets, strips, plates, round and flat bars, etc. but also in the manufacturing of other products including fittings, flanges or fasteners. Some typical sectors/fields of use of Inconel® alloy include:

Oil and gas extraction industries due to its high temperature resistance and oxidation resistant properties,

Heat treat applications, due to its resistance to extreme temperatures,

Saltwater (Marine) Applications, because of its extraordinary resistance to sodium chloride (salt) at a variety of temperatures,

Jet engines and turbines where they need to withstand extreme temperatures (low or high). At a passenger jet’s standard cruising altitude of 36.000 ft., the average air temperature is -56.3°C (-69.3°F), but the combustion process can exceed temperatures of 1.150°C (2120°F).

AVIATIONEU NEW ERA Inconel® strips are intended for use in different industrial applications. They are offered in strips/strip coils in different Inconel® variations  in a range of  thicknesses, widths and pre-cut or cut to order lengths meeting application requirements. Sourced from quality producers these strips are competitively priced. Unit of measurement for pre-cut strips is each (ea.) while for the cut to order strips is 1 kilogram (kg) unless otherwise stated. Appearing prices are  per unit of sale. Sea/sea-surface transport to customer destination is most commonly used. Appr. time for shipping: within 3 months from the time of order payment, depending on the ordered quantity. Please refer to any attached documentation  and contact us for additional information/clarifications and quotation.

Aircraft cables are stranded wires used in a wide variety of applications on or around the aircraft including flight control surfaces and tie-downs or other purposes. The term "wire rope" is also used when the diameter is larger than 3/8 inch (9.52 mm), with smaller gauges designated as cables or cords. They are specified by the number of strands times the number of wires in each strand. For example, “7x19” means the cable has seven (7) strands, with 19 wires in each strand. 7x19 is the most flexible aircraft cable construction, approximately twice as flexible as 7x7 construction.

AVIATIONEU NEW ERA aircraft ropes/cables feature smooth finish, corrosion resistance and high load bearing strength. They feature a tensile strength of 1570-1960 MPA, are sourced by certified manufacturers, competitively priced and offered in the common construction types (1X7, 7x17, 1x19, 7x19 ) in Galvanized or Stainless Steel, different diameters ( 9 -12mm for cables, 5-52 mm for ropes) and cut to order lengths in meters. Unit of measure and sale is the meter and the Minimum Order Quantity (MOQ) is 500 meters.  Appearing price is for reference only per meter. Please contact us for a quotation.

AVIATIONEU NEW ERA air relief valves can be used in different industrial applications. They are made from different materials,  EN 1AL (free cutting steel), 1SMnPb30+C or SAE 12L13  and zinc plated. Available in the following sizes:

Metric: M10 x 1 ARV

British Standard Pipe (BSP): 1/8" BSP ARV

U.S. National Pipe Thread (NPT): 1/8" NPT ARV, 1/4" NPT ARV

Sold by the piece (pc.) with Minimum Order Quantity (MOQ) 1000 pcs.  Appearing price is for reference only per pc. Please contact us for a quotation.

2000 series aluminum alloys, with copper as the primary alloying element, are a set of "hard alloys". They typically contain between 2 to 10% copper, with smaller additions of other elements. The copper provides substantial increases in strength and facilitates precipitation hardening but can also reduce ductility and corrosion resistance. These alloys are known for high performance and excellent strength over a broad range of temperatures   but can be the most challenging to weld. They find use in many industries, including the aerospace sector. They are essential materials in various industries such as aerospace, marine, construction, and automobile. 

Extruded round tubes from 2011, 2014, 2017 and 2024 aluminum alloys in T351 & T651 tempers are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality producers, they conform with ASTM specifications. Competively priced these tubes are available in different diameters 1-360 mm, wall thicknesses and cut to order (CTO) lengths max 6 m. Also available in other shapes (square, rectangular, hexagonal tubes and ultra-thin tubes). Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale. For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us.

All aircraft develop fuel leaks at one time or another which can ground an aircraft for unspecified time intervals. Fuel leaks are considered to be one of the most time consuming maintenance tasks required on an aircraft. Fuel line leak testers are intended to check leakages in fuel lines and assist maintenance personnel of Maintenance, Repair and Overhaul (MRO) facilities to detect and repair them. AVIATIONEU NEW ERA fuel line leak testers are offered as  part of our own label product portfolio of Aircraft MRO Equipment. For more information and a quotation please contact us.

AVIATIONEU NEW ERA aircraft tolleys are offered as part of our own label product portfolio of Aircraft MRO Equipment and they are indispensable equipment for any Maintenance, Repair and Overhaul (MRO) facility. 

Aircraft Build Trolley PN: 460007240 is intended for use in AIRBUS A320 Series aircraft to handle and support the MLG shock absorber after it has been removal. For more information and a quotation please contact us.

AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. It is  frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and other equipment, pressure vessels, treadplate, containers, and applications.  Alloy 5052 has a good marine atmosphere corrosion resistance of saltwater and excellent workability. Main features of this alloy include: non heat-treatable, excellent weldability, high corrosion resistance, smooth surface, lightweight, high-tensile strength.

Extruded bars/rods from 5052 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 5052 H112 Temper round bars are offered in different diameters 6 mm (15/64'') -300 mm (11-13/16") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AL5052 is an aluminium alloy, with magnesium and chromium as the primary alloying elements. Although It is non heat-treatable, it is the highest strength alloy of other non-heat-treatable grades also featuring an excellent weldability using most common techniques, high resistance to marine atmoshpere and salt water corrosion, smooth surface, lightweight and high-tensile strength. This alloy is comparable to the 6061 aluminum alloy (AL6061). 

AL5052-O CLAD (ALCLAD) tubes(*) are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other grade aluminum and steel alloys. Sourced from quality producers, they are offered as Annealed in different outer diameters and wall thicknesses in inches and  cut to order lengths up to 5 ft (60 in.). They can be used for low and medium pressure hydraulic systems, fuel lines and oil lines. Tubing is sold by foot. There is additional cost if manufacturing test reports are required.

For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations, the supplied documentation or contact us for quotation.

(*) ALCLAD is a corrosion-resistant aluminium sheet formed from high-purity aluminium surface layers metallurgically bonded (rolled onto) to high-strength aluminium alloy core material. As an enhanced sheet for fuselage applications, ALCLAD offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy. ALCLAD also offers improved fracture toughness and fatigue crack growth while maintaining the strength characteristics of the alloy.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AN818 Series of coupling nuts are offered as part of our own (AVIATIONEU NEW ERA) portfolio of fittings. Sourced from quality producers these fittings can be furnished in steel, aluminum or stainless steel and in different outer tube diameters and sizes in inches. 

Aluminum and Stainless Steel fittings are designated by the letters "D" and "J" respectively after the suffix number of the product reference number (SKU).

Machine screws are one of the more widely used products among dozens of standard fastener types. They can be either coarse-threaded or fine-threaded, and are usually available with a wide range of head types. Usually stronger than many other screw types, they are used for fastening metal parts and panels securely together in a range of construction and other applications including aerospace, machinery, vehicles, engines, tool assemblies, electronic devices, and large-scale industrial equipment. 

Sourced from quality producers,  machine screws are offered as part of our own branded (AVIATIONEU NEW ERA) product lines conforming to aerospace/military or industrial standards/specifications.  They come in different sizes, head types, materials and thread gradings. NAS Standard Machine Screws meet aerospace standards and come in different types and sizes structured in different series including NAS1101, NAS1102, NAS1189, NAS1190, NAS1191, NAS1635, NAS1801, NAS1802, NAS220, NAS229, NAS333, NAS514, NAS517, NAS560, NAS583, NAS600, NAS623 and NAS662.

AVIATIONEU NEW ERA NAS333/NAS334 series of machine (non structural) screws (also termed as bolts) are aeronautical standard 100 Deg. standard flush head, shear close tolerance screws. They are made from alloy steel per MIL-S-6049 with a Cadmium finish per QQ-P-416 Type II. They are both offered in different thread sizes, grips and lengths in inches and sold in pieces. CPA indicates a plated Phillips recess. The length and grip of the screw are indicated by numbers after the last dash in the product part number. For more information, please refer to the supplied documentation or contact us. 

NAS machine bolts are commonly used in aircraft, space shuttles, military vehicles, drones, and other high-performance applications. They are offered in different series to meet application requirements. NAS6203 through NAS6210 series include hex head, close tolerance, alloy steel, short thread, self-locking & non-locking bolts.

Sourced from quality producers, NAS6203 through NAS6210 series are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. These fine-threaded, dimpled-head hex bolts have a minimum tensile strength of 160,000 psi and a minimum shear strength of 95,000 psi. Thread length is consistent within each diameter (1103/6203 series have a shorter thread), and grips are available in 1/16” increments beginning at 1/16”. Used in applications where a premium-quality, high strength bolt is necessary. They come in different nominal diameters: NAS6203: 3/16 in. (0.1875"), NAS6204: 1/4 in. (0.25"), NAS6205: 5/16 in. (0.3125"), NAS6206: 3/8 in. (0.375"), NAS6208: 1/2 in. (0.500"), NAS6210: 5/8 in. (0.625").

NAS6206 series shear hexagon head bolts with a 3/8-24" thread supercede NAS1106 high strength bolts. Their shearing feature is used to minimize damage to critical components of the application. They are made from alloy steel with cadmium or chromium finishes and offered in different grips and lengths in inches with undrilled or drilled head and/or shank. They are sold in pieces.

The following letters after the basic part numbers specify the material, finish and drilling condition of these bolts.

No Finish Code for cadmium plated bolts

"C" for chromium plated bolts

"L" / "P" for self-locking bolts/self-locking bolts with patch type locking element only

Grip Dash Number indicating grip in .0625 increments

"D" after the grip dash number for drilled thread bolts

"H" after the grip dash number for bolts with drilled head

More than one code letters may be used in sequence.

For more information, please refer to the supplied documentation or contact us. 

MS20819/AN819 Series of coupling sleeves are offered as part of our own (AVIATIONEU NEW ERA) portfolio of fittings. Sourced from quality producers these fittings can be furnished in steel, aluminum or stainless steel and in different outer tube diameters and sizes in inches. Aluminum and Stainless Steel fittings are designated by the letters "D" and "J" respectively after the suffix number of the product reference number (SKU).

AVIATIONEU NEW ERA hydraulic grease nipples are sourced from certified manufacturers and they available in different types (conical, button or flush head, drive-in or self-forming). Please refer to the respective product presentations.

Conical head type grease nipples comply with DIN 71412, SAE J534 & IS 4009-2 standards. Hardness for nipple head: Min.550 HV. They are made from different materials,  EN 1AL(free cutting steel), 1SMnPb30+C,SAE 12L13 or stainless steel  303 & 316 with different surface finishes (clear/yellow/olive green zinc plated). Available with straight or angled nipples, tapered or parallel threads in different sizes:

Metric: from M5x0.8 to M16x1.5

British Standard Pipe (BSP): from 1/8"-28 to 3/8"-19

U.S. National Pipe Thread (NPT/PTF): from 1/8"-27 to 1/4"-18

U.S. ANSI/ASME B1.1 Unified National Thread - UNC Coarse series and UNF Fine series: from 1/4"-28 to 3/8"-24

Sold by the piece (pc.) with Minimum Order Quantity (MOQ) 1000 pcs.  Appearing price is for reference only per pc. Please contact us for a quotation.

Machine screws are one of the more widely used products among dozens of standard fastener types. They can be either coarse-threaded or fine-threaded, and are usually available with a wide range of head types. Usually stronger than many other screw types, they are used for fastening metal parts and panels securely together in a range of construction and other applications including aerospace, machinery, vehicles, engines, tool assemblies, electronic devices, and large-scale industrial equipment. 

Sourced from quality producers,  machine screws are offered as part of our own branded (AVIATIONEU NEW ERA) product lines conforming to aerospace/military or industrial standards/specifications.  They come in different sizes, head types, materials and thread gradings. NAS Standard Machine Screws meet aerospace standards and come in different types and sizes structured in different series including NAS1101, NAS1102, NAS1189, NAS1190, NAS1191, NAS1635, NAS1801, NAS1802, NAS220, NAS229, NAS333, NAS514, NAS517, NAS560, NAS583, NAS600, NAS623 and NAS662.

AVIATIONEU NEW ERA NAS583 series of machine (non structural) screws are aeronautical 100 deg. alloy steel cadmium plated flush head close tolerance machine screws  offered in different thread sizes and lengths in inches and sold in packs with number of pieces per pack specified after the letters "PK" in the product reference number (SKU). For more information, please refer to the supplied documentation or contact us. 

NAS machine bolts are commonly used in aircraft, space shuttles, military vehicles, drones, and other high-performance applications. They are offered in different series to meet application requirements. NAS6203 through NAS6210 series include hex head, close tolerance, alloy steel, short thread, self-locking & non-locking bolts.

Sourced from quality producers, NAS6203 through NAS6210 series are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. These fine-threaded, dimpled-head hex bolts have a minimum tensile strength of 160,000 psi and a minimum shear strength of 95,000 psi. Thread length is consistent within each diameter (1103/6203 series have a shorter thread), and grips are available in 1/16” increments beginning at 1/16”. Used in applications where a premium-quality, high strength bolt is necessary. They come in different nominal diameters:NAS6203: 3/16 in. (0.1875"), NAS6204: 1/4 in. (0.25"), NAS6205: 5/16 in. (0.3125"), NAS6206: 3/8 in. (0.375"), NAS6208: 1/2 in. (0.500"), NAS6210: 5/8 in. (0.625").

NAS6204 series shear hexagon head bolts with a 1/4-28" thread supercede NAS1104 high strength bolts. Their shearing feature is used to minimize damage to critical components of the application. They are made from alloy steel with cadmium or chromium finishes and offered in different grips and lengths in inches with undrilled or drilled head and/or shank. They are sold in pieces.

The following letters after the basic part numbers specify the material, finish and drilling condition of these bolts.

No Finish Code for cadmium plated bolts

"C" for chromium plated bolts

"L" for self-locking bolts

"P" for self-locking bolts with patch type locking element only

Grip Dash Number indicating grip in .0625 increments

"D" after the grip dash number for drilled thread bolts

"H" after the grip dash number for bolts with drilled head

More than one code letters may be used in sequence.

For more information, please refer to the supplied documentation or contact us.