AVIATIONEU NEW ERA Hexagon Socket Head Screws are made of Carbon Steel, Alloy Steel with a Black Oxide or Galvanized finish (depending on the P/N) and a strength class of 4.8 or other as specified by the letter "S" in the P/N. They are fully threaded, coarse type, and produced by certified manufacturers in accordance with DIN 7984 standard. They are offered in competitive prices in different diameters ("M" designated), indicating the screw's diameter in mm and lengths in mm. The thread pitch (the distance between threads measured along the length of the screw) expressed in mm is indicated by the "P" designation in the P/N. Sold in packs of 500, 250 or  50 pieces depending on the selected product. The number of pieces included in each pack is mentioned after "PK" designation.

Clevis pins are used as a quick and secure fastener in place of bolts and rivets. Clevis pins can be partially threaded or unthreaded. Unthreaded Clevis pins have a domed head at one end and a cross-hole at the other end. A Clevis pin is inserted through the holes at the pronged ends of a Clevis and is kept in place by a cotter pin. Threaded Clevis pins are partially threaded on one end with a formed head on the other.

MS20392 series Clevis pins are straight, headed pins with a drilled shank. They supersede those of AN392 to AN396 series and those of AN400, AN402, AN404, and AN406 series. MS20392 series Clevis pins are produced in different materials (steel alloy, corrosion resistant steel (CRES), titanium alloy) and surface finishes (cadmium plated, chrome plated, titanium alloy - aluminum coated) with a drilled hole for cotter pin. The following letters in the part number specify materials and finishes:

“C”  Steel alloy, 4037 4130 8630 or 8740 cadmium plated

“S”  Steel alloy, 8740 cadmium plated

“R” Corrosion resistant steel, PH13-8Mo chrome plated

“P” Corrosion resistant steel, PH13-8Mo cleaned descaled and passivated

“A” Titanium alloy Ti-6AI-4V, aluminum coated and lubricated with solid film lubricant

“T” Titanium alloy, Ti-6AI-4V, no finish

MS20392 series Clevis pins are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines in different materials, head, shank diameters and effective lengths. They are used with clevis forks and in secondary controls which are not subjected to continuous operation. For more information, please refer to the supplied documentation or contact us.

Sourced from quality producers, AVIATIONEU NEW ERA general purpose brass check valves with nylon cover are suitable for use in hydraulic, heating, air conditioning and pneumatic installations in vertical, horizontal or oblique positions. They are manufactured in accordance with ISO 228 standard and they are available in different sizes. Sold in pieces.

AVIATIONEU NEW ERA ASTM A324 Grade 10.9 Series high tensile hexagonal head threaded bolts are produced from medium carbon steel, medium carbon steel alloy and low carbon boron steel with heat treatment by both quenching and tempering.  They meet ASTM A324 Grade BD and SAE J429 standards. These bolds feature high tensile strength and good wear resistance and are used in automotive applications and for bolting large and forged parts. 

Nominal Tensile Strength: 1.000 Megapascal (MPa) or 1.000 N/sqr. mm , Yield Stress: 900 Megapascal (MPa) or 900 N/sqr. mm 

They are offered in different finishes (zinc plated, plain or hot dip galvanised) and different standard, coarse and fine thread sizes (diameter M20 to M100 mm / 3/4" to 3.1/2").  Sold by the piece (pc.) in increments of 10 pieces with Minimum Order Quantity (MOQ) 100 pieces. Appearing price is for reference only and differentiates based on wanted bolt sizes. Please contact us for a quotation.

Aircraft washers used in airframe construction or repair works are either plain, lock, or special type washers. 

AN960/AN960L series are aeronautical (Army-Navy) standard flat washers superseded by the respective washers in NAS1149/NAS1149L series. They come in regular thickness (NAS1149/AN960) or light thickness (NAS1149L/AN960L) indicated by the letter "L" in the dash number of the product reference number (SKU). They are made from different materials such as carbon steel, corrosion resistant steel (CRES) and aluminum alloys. These washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the correct grip length for a bolt and nut assembly, and to adjust the position of AN310 and AN320 castle nuts with respect to drilled cotter pin holes in bolts and clevis pins. 

NAS1149/AN960 and NAS1149L/AN960L series washers are offered as part of our own labeled (AVIATIONEU NEW ERA) product lines. They can be furnished in different materials (such as carbon steel, CRES, anodized aluminum or aluminum alloy), different finishes and different inside, outside diameters and thicknesses in inches.  Letters in the part number of NAS1149/AN960 washers are used for material and finish specification. Please refer to the supplied documentation for information on available sizes, materials, finishes and cross reference between  AN960  and NAS1149 series washers.

Sold in packs with a specified number of washers per pack indicated after the letters "PK" in the product reference number (SKU).

AVIATIONEU NEW ERA high tensile stainless steel threaded bolts are manufactured from AISI 410 stainless steel and heat-treated and machined to minimum of 110-ksi or 760 Mpa tensile strength. They are dual ASTM & ASME certified (ASTM A193 B6: Class 1 Stainless Steel, ASME B1.1 2A/3A Inch Unified Threads and B1.13M 6h Metric Coarse Threads). In addition to their high tensile strength, they exhibit excellent resistance to corrosion, good dimensional stability, durability as well as a long functional work life. They can be used in different industries demanding high tensile strength and corrosion resistance like marine, chemical & petrochemical etc. Sold in in packs (pk) of 25 bolts/pk in different head, body diameters and thread lengths in inches with Minimum Order Quantity (MOQ) 10 packs. Please refer to the attached specifications table. Appearing price is for reference only and differentiates based on wanted bolt sizes. Please contact us for a quotation.

AVIATIONEU NEW ERA Hexagon Bolts are made of Stainless Steel 304/316 (depending on the P/N) with a bright surface treatment and a strength class of A2-70 for SS 304 bolts and A4-70 for SS 316 bolts. They are fully threaded, coarse type, and produced by certified manufacturers in accordance with DIN 933 standard. They are offered in competitive prices in different diameters ("M" designated), indicating the bolt's diameter in mm and lengths in mm. The thread pitch (the distance between threads measured along the length of the bolt) expressed in mm is indicated by the "P" designation in the P/N. Sold in packs of 250, 100 or  25 pieces depending on the selected product. The number of pieces included in each pack is mentioned after "PK" designation.

AVIATIONEU NEW ERA air relief valves can be used in different industrial applications. They are made from different materials,  EN 1AL (free cutting steel), 1SMnPb30+C or SAE 12L13  and zinc plated. Available in the following sizes:

Metric: M10 x 1 ARV

British Standard Pipe (BSP): 1/8" BSP ARV

U.S. National Pipe Thread (NPT): 1/8" NPT ARV, 1/4" NPT ARV

Sold by the piece (pc.) with Minimum Order Quantity (MOQ) 1000 pcs.  Appearing price is for reference only per pc. Please contact us for a quotation.

Structural screws are made of alloy steel, are properly heat treated, and can be used as structural bolts. Those commonly used in aircraft applications are manufactured to aerospace/military standards/specifications. They are offered as part of our own branded (AVIATIONEU NEW ERA) product lines in different materials and finishes, structured in different series based on the standard of their conformance.

AVIATIONEU NEW ERA MS27039 Series structural machine screws are pan head cross recessed screws equivalent to those of NAS 220 Series. MS27039 Series screws are fabricated from Alloy Steel and Cadmium plated per specification QQ-P-416A, Type II, Class 3, Anodized Aluminum Alloy 2024 or Stainless Steel Unplated  to MIL-S-6050 or MIL-8695 specifications. Those from are designated by the letters "DD" and their counterparts from stainless steel  by the letter "C" respectively in the product part number after MS27039 and before the size number. These screws have 125,000 to 145,000 psi tensile strength. Sourced from quality suppliers, they are offered in different thread sizes and lengths in inches and sold in pieces or convenient packs of specified number of screws per pack indicated after the letters "PK" in the product reference number (SKU).

Other structural screws of NAS204 through NAS235 and AN509/AN525 series are also available (see individual product presentations).

For more information, please refer to the supplied documentation or contact us.

In co-operation with aircraft manufacturers, AVIATIONEU NEW ERA Lease or Buy Programs have been developed for ultralight and light aircraft (*). They are generally offered as FACTORY NEW although used aircraft may be included. Depending on the selection, these can be used for recreational and business flying, pilot training, aeroclub operations or other missions (e.g surveillance or aerial photography). A range of support services are also offered (as required) depending on the leasing or buy option and the country of operations. These indicatively include initial airworthiness certification in the country of destination, user training on aircraft operations, supply of spare parts and consummables, aircraft maintenance, insurance etc. Some of these services are prerequisites in the leasing option. Please refer to the individual aircraft presentations or contact us for additional information and quotation.

(*) The term "Ultralight" is often used to denote different aircraft types across the world. In the U.S.,Ultralights are referred to as vehicles (not aircraft) and must be a single-place of very light weight. The term "Light Sport Aircraft (LSA)" is used in FAA regulations (FARs) for certification of aircraft complying with the ASTM standards and subject to specified limitations such as non-pressurised cabin, max seating capacity of two persons (including the pilot), a single reciprocating engine, a MTOW of not more than 1,320 pounds, a fixed-pitch or  ground-adjustable propeller, etc. In Europe, certification of Ultralights falling under Annex II of the European Union Aviation Safety Agency (EASA) Basic Regulation is handled under national rules. EASA has introduced a new certification process for the European Light Aeroplane (ELA) considered as a simple two-seater non-pressurised aircraft for "non-aerobatic" and "VFR day" operations only with a single, non-turbine engine fitted with a propeller and a maximum take-off weight of 600kg.

Cotter pins are used to secure bolts, screws, nuts, and pins. Military standard MS24665 split cotter pins are made from cadmium plated steel, replacing those of AN380 series or passivated corrosion resistant steel (CRES), replacing those of AN381 series. The CRES cotter pins are more resistant to corrosion and also used where heatresisting attributes are desired, such as forward of firewall or  in locations where nonmagnetic material is required. Regardless of their shape or material, all cotter pins serve the same general purpose - safetying. MS24665 split cotter pins are superseded by respective part numbers of NASM24665 series.

MS24665 Series split cotter pins are offered as part of our own branded (AVIATIONEU NEW ERA) product lines in cadmium plated steel or passivated corrosion resistant steel and in different diameters and lengths. Sold in pieces. For more information, please refer to the supplied documentation or contact us.

Socket screws are available in regular cap screw and flat and button type. These screws are used in many industries and applications including  military, aerospace, defense, mechanical, original equipment manufacturers, petro-chemical, power generation & mass transit.  They are generally alloy or stainless steel, but can be provided in monel or other materials. Socket screws are generally of higher precision since the thread tolerances are more stringent. Socket Set Screws come in different sizes and many meet aerospace/military standards. These include AN565 (superseded by NASM565), NAS1081, MS18063, MS18064, MS51021, MS51023, MS51029, MS51031, MS51038, MS51045, MS51963, MS51964, MS51965, MS51966. 

AN565 (NASM565) and MS51963 series are offered as part of our own branded AVIATIONEU NEW ERA product lines. Those included in AN565 (NASM565) series are headless hex and fluted socket set screws while those in MS51963 series are cup point hex socket set screws.  Both are made of high-quality steel and they are designed to deliver maximum holding pressure.They are easy to use and the shape of the hole in the screw is noted in the description. Hexagonal screws can be operated using a standard Allen wrench. Set screws are most typically used to bind parts onto shafts. Available in cup or cone point styles, in different thread sizes and lengths in inches and they are sold in pieces. For more information, please refer to the supplied documentation or contact us.

AVIATIONEU NEW ERA ASTM A193 Grade B6 Series stainless steel stud bolts are manufactured from the ferritic grade AISI 410 stainless steel and can be heat-treated and machined to minimum of 110-ksi or 760 Mpa tensile strength. Like other fasteners in this seies, apart from their high tensile strength, they exhibit excellent resistance to corrosion, durability as well as a long functional work life. They can be used in different applications in industries that demand high tensile strength and corrosion resistance. Sourced by certified manufacturers they are competively priced and offered in different diameters and lengths. Sold by the piece (pc.) in increments of 10 pieces with Minimum Order Quantity (MOQ) 100 pieces. Appearing price is for reference only and differentiates based on wanted bolt sizes. Please contact us for a quotation.

NAS1922/NAS1924 series clamps are light-weight, aircraft application clamps from 300-series stainless steel available with either a 1/4" round slotted screw or a 1/4" slotted hex-head screw. 

NAS1922/NAS1924 series clamps are included as part of our own branded (AVIATIONEU NEW ERA) product lines. They are available in different sizes (NAS1924 clamps are available in sizes 48 & above). Both screw styles can be supplied with optional lock wire hole for tamper resistance. Black Oxide coated band versions (designated by the letter "L" in the part number) are also offered for increased wear resistance.

The following designators in the product reference number (SKU) indicate the different versions:

-1 Clamp with round slotted screw

-3 Clamp with slotted hex-head screw

-1H Clamp with round slotted screw & lock wire hole

-3H Clamp with slotted hex-head screw & lock wire hole

NAS1922/NAS1924 series clamps are sold in pieces or packs of specified number of pieces indicated after the letters "PK" in the product reference number (SKU).

Please refer to the attached documentation of the effective diameter range for different part numbers.

Titanium fasteners are best known for their strength,  lightweight, and corrosion resistance. They feature an excellent strength to weight ratio and significant mechanical properties but perhaps their most notable attribute is their superior corrosion resistance to salt water / seawater operating conditions. Titanium fasteners are used in aerospace, automotive and motorsports but also in many other industries including chlor alkali, marine, off-shore oil & gas, desalination, medical, and pulp and paper. They come in different types (like bolts, screws and nuts), sizes, titanium grades and standards/specifications (e.g. ANSI/ASME, DIN/ISO, ASTM, ASME, MIL specifications etc.) to meet application requirements. Compared to respective fasteners made of steel and aluminum, as a rule of thumb, titanium fasteners are about half the weight of their steel counterparts while aluminum fasteners are about half the weight of titanium ones.

Sourced from quality producers, a wide range of titanium fasteners are offered as part of AVIATIONEU NEW ERA product lines (please refer to the individual product presentations). 

AVIATIONEU NEW ERA Titanium nuts are available in both inch and metric systems. Their typicals uses include aerospace, marine, motorsports and many other applications. Manufactured from 6AL-4V grade titanium, CNC machined, heat treated with hexagonal heads and rolled threads these nuts come in diffrent types including locking and flange nuts(*), sizes, thread pitches, flange diameters and lengths. They are sold in pieces. For more information or unlisted fasteners please contact us.

(*) Appearing dimensions for Flange Nuts: Hex Size, Flange Diameter, Height (Hex or Total).

Copper wires are conductors of electricity and they are used for a wide range of applications including power generation, power transmission, power distribution, telecommunications, electronics circuitry and others. Apart from the high conductivity copper features durability, tensile strength and corrosion resistance.

AVIATIONEU NEW ERA copper round wire product range includes bare copper, copper, paper insulated copper wires as well as double cotton covered and silver or tinned plated copper wires. 

They are offered in rolls in different wire gauges (*). Sold in kilograms except the double cotton covered wire which is sold by the meter. Appearing prices is for reference only per UOM. Please contact us for a quotation.

Bare Copper Wire, Gauge 0-5

Paper Insulated Stranded Wire, Gauge 0-5

Tinned Plated Copper Wire (Temperature 120 deg. C), Gauge 0.2-2

Silver Plated Copper Wire (Voltage up to 1000 V, Flame Retardant), Gauge 0-5

Double Cotton Covered Copper Wire, Gauge 0-5

(*) Wire gauge is a measurement of wire diameter. This determines the amount of electric current a wire can safely carry, as well as its electrical resistance and weight. Please refer to the respective table.

The MATCO MCR-100A Remote Reservoir is designed for both aerobatic or non-aerobatic flights and includes mount bracket, cap,check valve, and bowl. Reservoir has approximately 2 oz. volume and has valve incorparated for checked flow to the vent when inverted or negative g's. Reservoir includes 1/8 NPT adapter fitting and seal for connection to poly bowl and easy open top.

The MATCO MCR-100K Brake Fluid Reservoir features a clear plastic bowl for easy inspection of reservoir fluid. Furnished with pre-drilled aluminum flange for easy mounting.Small and compact, this reservoir mounts almost anywhere. It is offered as Reservoir only or as Kit includin the reservoir, tubing, and fittings for installation.