AL2024 is an aluminium alloy, with copper as the primary alloying element. It is used in applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. It comes in different tempers (O without heat treatment or T with heat treatment).

AL2024 bars/rods are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other aluminum and steel alloys (e.g. AL5052, AL6061, AL7050, AL7075, ST4130, ST4140 etc.). They come in different cross sections such as round, rectangular,hexagonal or square. Like other AL2024 products, these bars/rods can be used in an extensive list of applications in aerospace, automotive and many other industrial sectors.

AVIATIONEU NEW ERA heat treated aluminum round bars from 2024 alloy are sourced from quality producers. They are offered in T4 and T6 tempers for use in a range of aviation and industrial applications, consisting a cost effective solution when large quantities are demanded. They comply with ASTM specifications and they are available in different diameters (3mm-800mm) and cut to order lengths (1m-12m). Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

AVIATIONEU NEW ERA ASTM A324 Grade 10.9 Series high tensile hexagonal head threaded bolts are produced from medium carbon steel, medium carbon steel alloy and low carbon boron steel with heat treatment by both quenching and tempering.  They meet ASTM A324 Grade BD and SAE J429 standards. These bolds feature high tensile strength and good wear resistance and are used in automotive applications and for bolting large and forged parts. 

Nominal Tensile Strength: 1.000 Megapascal (MPa) or 1.000 N/sqr. mm , Yield Stress: 900 Megapascal (MPa) or 900 N/sqr. mm 

They are offered in different finishes (zinc plated, plain or hot dip galvanised) and different standard, coarse and fine thread sizes (diameter M20 to M100 mm / 3/4" to 3.1/2").  Sold by the piece (pc.) in increments of 10 pieces with Minimum Order Quantity (MOQ) 100 pieces. Appearing price is for reference only and differentiates based on wanted bolt sizes. Please contact us for a quotation.

Steel alloy 4130 (ST4130),aka Chrome Moly,after the 2 key composition elements,chromium & molybdenum,is a general-purpose alloy steel widely used by the aviation and motorsports industries due to its weldability, fabrication and mild hardenability in all offered forms (tubes, bars/rods, sheets and plates). Available in two material states (Normalized and Annealed) depending on the process of how the material is heated and cooled.The Normalized condition (aka "Condition N") is the harder and stronger condition, best used when forming is not needed while the Annealed condition (aka "Condition A") is the softer and formable condition.

4130 steel bars/rods in round, rectangullar (flat), square and hexagonal shapes (cross sections) are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. Sourced from quality producers, most of these bars/rods are produced, unless otherwise specified, as “Cold Finished Normalized” (aka “Condition D4”), indicated by the letters "NRZ" and  "CF" in the product SKUs. They come in different dimesions in inches and cut to order (CTO) lengths in feet (*) and meet several AMS specifications, most common being AMS-S-6758 and AMS- 6348. They are widely used in a variety of applications due to their excellent strength to weight ratio,weldability by all conventional methods and resistance to scaling and oxidation. 

Unless otherwise mentioned, there is additional cost if manufacturing test reports are required. For additional information, please refer to the supplied documentation, the individual product presentations or contact us.

(*) As per vendors' requirements, certain 4130 steel bars/rods are ONLY SOLD in 3 feet increments, i.e. cut lengths can only be set to 3, 6, 9 feet etc. as mentioned in the respectivel product presentations. In this case, appearing prices are per 3 feet length and the Minimum Order Quantity (MOQ) is 3 pieces for each of selected rod/bar. Required cut lengths should be specified at the time of ordering.

AVIATIONEU NEW ERA Brass plain washers are made of copper, nickel alloy with a natural color finish in accordance with DIN 125 standard. Sourced from certified manufacturers these washers are offered in competitive prices and they are available in different sizes on the basis of their Clearance (Hole) Diameter/Outer Diameter/Thickness in mm. Sold in packs of 250 or 50 pieces depending on the selected product. The number of pieces included in each pack is mentioned after "PK" designation.

NAS machine bolts are commonly used in aircraft, space shuttles, military vehicles, drones, and other high-performance applications. They are offered in different series to meet application requirements. NAS6203 through NAS6210 series include hex head, close tolerance, alloy steel, short thread, self-locking & non-locking bolts.

Sourced from quality producers, NAS6203 through NAS6210 series are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. These fine-threaded, dimpled-head hex bolts have a minimum tensile strength of 160,000 psi and a minimum shear strength of 95,000 psi. Thread length is consistent within each diameter (1103/6203 series have a shorter thread), and grips are available in 1/16” increments beginning at 1/16”. Used in applications where a premium-quality, high strength bolt is necessary. They come in different nominal diameters: NAS6203: 3/16 in. (0.1875"), NAS6204: 1/4 in. (0.25"), NAS6205: 5/16 in. (0.3125"), NAS6206: 3/8 in. (0.375"), NAS6208: 1/2 in. (0.500"), NAS6210: 5/8 in. (0.625").

NAS6205 series shear hexagon head bolts with a 5/16-24" thread supercede NAS1105 high strength bolts. Their shearing feature is used to minimize damage to critical components of the application. They are made from alloy steel with cadmium or chromium finishes and offered in different grips and lengths in inches with undrilled or drilled head and/or shank. They are sold in pieces.

The following letters after the basic part numbers specify the material, finish and drilling condition of these bolts.

No Finish Code for cadmium plated bolts

"C" for chromium plated bolts

"L" / "P" for self-locking bolts/self-locking bolts with patch type locking element only

Grip Dash Number indicating grip in .0625 increments

"D" after the grip dash number for drilled thread bolts

"H" after the grip dash number for bolts with drilled head

More than one code letters may be used in sequence.

For more information, please refer to the supplied documentation or contact us. 

The AVIATIONEU NEW ERA MS-20 (or MC-20 in Cyrillic) is a petroleum based aviation oil for selective cleaning, produced from non-paraffined crude oil with low sulfur content. Ιτ has high viscosity, excellent adhesion, good lubricating qualities and flash point at no less than 265ºC. Intended uses include piston aircraft engines, oil-mixtures with oils MS-8P and MS-8 (in different proportions) in lubricating systems of turboprop engines, feathering hinges of helicopter rotor heads, lubricating engine compressors of gas compressor units, speed governors of diesel engines with self-contained oil systems and crankcases as well as a base component of many lubricating oils and greases. The MS-20/MC-20 oil is offered in different packaging options as alternative for other produccts such as AeroShell 100 Piston Engine. Meets GOST specification: МС-20 ГОСТ GOST 21743-76.

Product Features:

- Deterging properties

- Minimum deposits in combustion chambers, spark plugs, rings, pistons, and other components

- Reduced wear

- Increased equipment reliability

- High oxidative and thermal stability

- Strict quality control over the whole manufacturing process

- Easier cold starting

- Excellent high temperature properties

AL2024 is an aluminium alloy, with copper as the primary alloying element. It is used in applications requiring high strength to weight ratio, as well as good fatigue resistance, weldablility and average machinability. It comes in different tempers (O without heat treatment or T with heat treatment).

AL2024 bars/rods are offered as part of our own branded (AVIATIONEU NEW ERA) product lines along with those from other aluminum and steel alloys (e.g. AL5052, AL6061, AL7050, AL7075, ST4130, ST4140 etc.). They come in different cross sections such as round, rectangular,hexagonal or square. Like other AL2024 products, these bars/rods can be used in an extensive list of applications in aerospace, automotive and many other industrial sectors.

AVIATIONEU NEW ERA heat treated aluminum hexagonal bars from 2024 alloy are sourced from quality producers. They are offered in T3/T4/T6/T651 tempers for use in a range of aviation and industrial applications, consisting a cost effective solution when large quantities are demanded. They comply with ASTM specifications and they are available for cut to order in different dimensions and surface finishes. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film.

NAS machine bolts are commonly used in aircraft, space shuttles, military vehicles, drones, and other high-performance applications. They are offered in different series to meet application requirements. NAS6203 through NAS6210 series include hex head, close tolerance, alloy steel, short thread, self-locking & non-locking bolts.

Sourced from quality producers, NAS6203 through NAS6210 series are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. These fine-threaded, dimpled-head hex bolts have a minimum tensile strength of 160,000 psi and a minimum shear strength of 95,000 psi. Thread length is consistent within each diameter (1103/6203 series have a shorter thread), and grips are available in 1/16” increments beginning at 1/16”. Used in applications where a premium-quality, high strength bolt is necessary. They come in different nominal diameters: NAS6203: 3/16 in. (0.1875"), NAS6204: 1/4 in. (0.25"), NAS6205: 5/16 in. (0.3125"), NAS6206: 3/8 in. (0.375"), NAS6208: 1/2 in. (0.500"), NAS6210: 5/8 in. (0.625").

NAS6206 series shear hexagon head bolts with a 3/8-24" thread supercede NAS1106 high strength bolts. Their shearing feature is used to minimize damage to critical components of the application. They are made from alloy steel with cadmium or chromium finishes and offered in different grips and lengths in inches with undrilled or drilled head and/or shank. They are sold in pieces.

The following letters after the basic part numbers specify the material, finish and drilling condition of these bolts.

No Finish Code for cadmium plated bolts

"C" for chromium plated bolts

"L" / "P" for self-locking bolts/self-locking bolts with patch type locking element only

Grip Dash Number indicating grip in .0625 increments

"D" after the grip dash number for drilled thread bolts

"H" after the grip dash number for bolts with drilled head

More than one code letters may be used in sequence.

For more information, please refer to the supplied documentation or contact us. 

Sourced from quality manufacturers, the aviation headsets included in the AVIATIONEU NEA ERA product lines are offered in different series and models for aeroplanes and helicopters. They range from  the low cost, entry level PH-100 series PNR and ANR models, ideal for flight schools, to the PH-400 series high performance, ultra light carbon fiber PNR and ANR headsets weighting  only 9oz (255g) for use in airlines and military operations. With their competitive prices, advanced design and features, quality materials and rigid construction, AVIATIONEU NEA ERA headsets combine performance, functionality and comfort to provide cost effective solutions for every need. PH-100 series PNR and ANR models are offered in multiple colors to meet style requirements while PH-400 series PNR and ANR headsets come in carbon fiber black color. All AVIATIONEU NEA ERA aviation headsets are accompanied by our Certificate of Conformance and a 12-month warranty.

PH-100 series includes PNR aviation headsets with a 23dB (PH-100A) / 24dB (PH-100AH) noise reduction rating as well as PH-100AC headsets with active noise reduction capability (ANR). Offered in Black, Blue, Yellow, Green, Grey, Pink and Red colors. Depending on the model, they feature a fully adjustable spring steel headband (PH-100AC), half gel/half foam (or optionally, full gel) ear pads, a low-profile volume control knob, noise-canceling electret (or optionally, dynamic) microphone with a 270 deg. spring tension boom, a small AA battery box with belt clip (ANR models) and GA  dual plug (PH-100A/PH-100AC) or U174/U plug (PH-100AH) for use in helicopters. The headsets are accompanied by our Certificate of Conformance. Please refer to additional information in the individual product presentations or contact us.

Grade 410 is a basic general-purpose hardenable martensitic stainless steel alloy for highly stressed requirements, providing good corrosion resistance. Martensitic stainless steels are fabricated using techniques requiring final heat treatment. These grades are less resistant to corrosion when compared to those of austenitic. Their operating temperatures are often affected by their loss of strength at high temperatures, due to over-tempering and loss of ductility at sub-zero temperatures. Quenching and tempering can harden grade 410 steels while their corrosion resistance can be further enhanced by hardening, tempering and polishing. 

410 is a very common grade used in many industries such as aerospace, power generation, and general industry. Generally used for applications requiring mild corrosion, heat resistance and high strength and ductility. Indicative examples include steam / gas turbine blades and buckets, bushings, valve components, fasteners, nuclear reactor control rod mechanisms, petrochemical equipment and machine parts.

Grade 410 round bars/rods are offered as part of AVIATIONEU NEW ERA product lines. Sourced by quality producers, these bars/rods are available in different diameters and pre cut lengths in inches. They meet AMS -QQ-S-763, AMS -5612, AMS -5613, AMS -2303, ASTM -A276, ASTM -A479 specifications. For additional information, please refer to the supplied documentation or contact us.

AVIATIONEU NEW ERA end hose banjo fittings are intended for use in hydraulic pipes in automotive fuel, oil and hydraulic systems. They are available with single or double ends from different materials, mild steel, EN 1AL(free cutting steel), 11SMnPb30, EN 8, stainless steel 202 & 304. Sourced by certified manufacturers these banjo fittings are competitively priced and offered in different Metric sizes (M10x5/16", M12x5/16", M14x5/16", M14x3/8", M16x3/8", M18x3/8", M18x1/2") and different surface treatments (clear /yellow zinc plated, olive green zinc plated, dacromet). Sold by the piece (pc.) with Minimum Order Quantity (MOQ) 500 pcs.  Appearing price is for reference only per pc. Please contact us for a quotation.

AVIATIONEU NEW ERA ASTM A193 Grade B6 Series stainless steel hexagonal nuts are manufactured from AISI 410 stainless steel. Like other fasteners in this seies, apart from their high tensile strength, they exhibit excellent resistance to corrosion, durability as well as a long functional work life. They can be used in different applications in industries that demand high tensile strength and corrosion resistance. Sourced by certified manufacturers they are competively priced and offered in different sizes in packs of 50 nuts/pack. Unit of measurement is 1 pack (pk) with Minimum Order Quantity (MOQ) 10 packs. Appearing price is for reference only and differentiates based on wanted nut sizes. Please contact us for a quotation.

AL6061 is an aluminium alloy, with magnesium and silicon as the primary alloying elements. It is one of the most common alloys of aluminum for general-purpose use. Commonly available in pre-tempered grades such as 6061-O (annealed) as well as tempered grades such as 6061-T6 or 6061-T651. It can be compared with AL5052 (the highest strength alloy of the more non-heat-treatable grades) as well as with AL6063 which  is similar in composition and mechanical properties. AL6061 main features include: heat-treatable, excellent machinability, excellent corrosion resistance, semi-smooth surface, lightweight, high-tensile strength. Commonly used in transportation components, recreation products, machinery and equipment, and consumer durables.

Extruded bars/rods from 6061 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. They come in different cross sections such as round, rectangular or square. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered as Fabricated (F) or H112 tempered. 

AVIATIONEU NEW ERA Aluminum 6061 H112 Temper square bars are offered in different dimensions 5 mm × 5 mm (13/64" x 13/64") up to 150 mm × 150 mm (5-29/32" x 5-29/32") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

When there is a need for connection of a set of electrical wires, terminal blocks provide a safe & convenient way to keep them organized. AVIATIONEU NEW ERA TR series of snap on (clip type) terminal blocks allows for terminal block assemblies to be installed and realeased fast and easily. Terminal block connectors are rugged, easy to use and designed to keep wires of varying gauges securely connected. They can be mounted on the 35/7.5mm DIN rail of 1 or 2 meter length made from aluminum or zinc plated steel which is in turn can be mounted on control panel backplates. Any pole assembly is possible. With the use of a DIN rail protective conductor terminal block, the rail itself can be used as the grounding terminal block.

The connectors are offered in black color (or other colors as per customer requirements), with a rated voltage of  600V and different rated current options (10A,20A,30A or 40A). They are sold in packs of 100 pieces each and come with paper marker strips & transparent cover. DIN mount rail & accessories are available at additional cost. These can be ordered only together with the terminal blocks. Appearing prices are for reference only. Contact us for a quotation.

MS21049/MS21050 Series nut plates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers they are low height fixed self-locking two-lug reduced rivet spacing nut plates.  MS21049 series nut plates are manufactured from cadmium plated steel while those in MS21050 series are produced from corrosion resistant steel and silver plated. They are available in different Unified thread sizes, with plain or countersunk rivet holes on each side and come with or without a dry film lube. Nut plates with a dry film lube are specified by the letter "L" in the part number. Nut plates with countersunk rivet holes are specified by the letter "K" at the end of the part number.

Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

AVIATIONEU NEW ERA Hexagon Socket Head Screws are made of Carbon Steel, Alloy Steel with a Black Oxide or Galvanized finish (depending on the P/N) and a strength class of 4.8 or other as specified by the letter "S" in the P/N. They are fully threaded, coarse type, and produced by certified manufacturers in accordance with DIN 7984 standard. They are offered in competitive prices in different diameters ("M" designated), indicating the screw's diameter in mm and lengths in mm. The thread pitch (the distance between threads measured along the length of the screw) expressed in mm is indicated by the "P" designation in the P/N. Sold in packs of 500, 250 or  50 pieces depending on the selected product. The number of pieces included in each pack is mentioned after "PK" designation.

Aircraft waste leak testing equipment are used to plug the waste system and provide leak detection. AVIATIONEU NEW ERA aircraft waste leak testing equipment are offered as  part of our own label product portfolio of Aircraft MRO Equipment. For more information and a quotation please contact us.

AL7050 (known as a commercial aerospace alloy) is a heat-treatable aluminium alloy with zinc as the main alloying element, combining high mechanical strength, good stress corrosion cracking resistance and toughness at subzero temperatures. Typical mechanical properties of 7050 aluminum in metric and imperial systems include a tensile strength of 515 MPa (74695 psi), a yield strength of 455 MPa (65992 psi) and a fatigue strength of 240 MPa (34809 psi). Particularly suitable for heavy plate aerospace and other commercial and military applications, such as fuselage frames, bulkheads, wing skins and aircraft structures.

Extruded bars from 7050 aluminum alloy are offered as part of our own branded (AVIATIONEU NEW ERA) product lines. Competitively priced, they are sourced from quality producers, comply with ASTM specifications and offered in different shapes, (round, rectangular and square), tempers (e.g. as Fabricated (F) or H112 tempered), specifications, diameters/thicknesses and cut-to-oder lengths to meet order requirements. 

7070 aluminum alloy square bars are available in different dimensions 5 mm × 5 mm (13/64" x 13/64") up to 150 mm × 150 mm (5-29/32" x 5-29/32") and cut to order lengths up to 12000 mm (12 m), consisting a cost effective solution when large quantities are demanded. Unit of sale is 1 Ton (US or Metric as specified) with Minimum Order Quantity (MOQ) 1 Ton. Sea/sea-surface transport to customer destination can be provided. Approximate time for shipping: usually 1-2 months from the time of order payment depending on the ordered quantity. Appearing price is indicative per unit of sale.  For additional information, please refer to our attached Brief Guide on Aluminum Grades & Temper Designations or contact us for quotation.

Note: AVIATIONEU NEW ERA metals are supplied free from oil stains, dents, inclusions, scratches, oxide discolorations, corrosion, or other defects. In certain cases, metals are additionally protected with PVC film. 

Anchor nuts (aka nut plates) are designed for blind mounted applications where it is impractical to use hex nuts. Sourced from quality manufacturers, a range of nut plates comlying with different Military Specifications are offered as part of AVIATIONEU NEW ERA product lines. They come in Unified thread sizes (*), Standard and Miniature versions, different types (fixed or floating, one lug, two lugs, corner, etc.) and various materials & finishes to meet application requirements. For more information and specifications of different MS series nut plates please refer to individual product presentations. Respective Non Military (Commercial) anchor nuts, meeting DIN, ISO and other standards, both in Metric (M3 - M12 diameters) and Unified thread types are also available from AVIATIONEU NEW ERA product portfolio. All AVIATIONEU NEW ERA anchor nuts are competitively priced and are cost effective alternatives to the respective OEM parts. They are sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time.Please refer to product specifications or contact us.

(*) There is currently no military specification for Metric nut plates.

AVIATIONEU NEW ERA SC screw lug type battery terminals are available in three versions: SC(JGA), SC(JGY) and SC(JGB). Please refer to the specifications table. They are made from brass (99.7% copper), tin plated and can be used with wire sizes 1.5-1000mm2 in a wide range of applications. Operating Temperature: :-55 to 150 deg. C. Sold in packs of 100 pieces each with Minimum Order Quantity (MOQ) 25 packs. The appearing price is for reference only. Please contact us for quotation.