These AVIATIONEU NEW ERA hot rolled seamless carbon steel alloy round tubes are produced as per ASTM A519 specification and offered in 4118, 4130,4135,4137 and 4140 alloy steel. Sourced from certified manufacturers, they are competitively priced and can be used in different industies (aerospace, petroleum, chemical, etc.) due to their high/low temperature and corrosion resistance. Available in different sizes of wall thickness (1-80 mm), outer diameter (6-760 mm) and lengths (5.8m, 6m, 11.8m, 12m, or cut to order). Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 5 US Tons. Sea/sea-surface transport to destination. Approximate time for shipping: 2 months from the time of order payment. Appearing price is indicative per unit of sale. Please contact us for quotation.
AVIATIONEU NEW ERA ASTM 5052 Aluminum Alloy F-H112 Temper Extruded Square Bar SKU: AVEUNE-AL5052SQRBR/F-H112
AVIATIONEU NEW ERA extruded square bars from 5052 aluminum alloy are competitively priced, sourced from certified manufacturers, produced as per ASTM specification and offered as Fabriacted (F) or H112 tempered. Used in aviation and industrial applications. They are available in dimensions 5 mm × 5 mm (13/64" x 13/64") up to 150 mm × 150 mm (5-29/32" x 5-29/32") and length up to 12000 mm (12 m). Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 1 US Ton. Sea/sea-surface transport to destination. Appr. time for shipping: 1 month from the time of order payment. Appearing price is indicative per unit of sale. Please contact us for for additional information and quotation.
Our Quick Guide for Aluminum Alloys & Tempers is now available. Please see attached file.
20 other products in the same category
The 12LiS Cordless Screw Gun from AVIATIONEU NEW ERA product line is an irreplaceable assistant both in life, and on production. This easy, compact screw gun with a rated voltage of 12 V features:
- a speed of 0-350/1200 rpm,
- boss size: 10 mm,
- torque 15 nanometers,
- 2 accumulators with capacity 2 Ach providing long time to perform required works,
- battery built-in indicators to show when the accumulator needs to be charged
- rubberized handles.
- one year manufacturer's guarantee
AVIATIONEU NEW ERA 12LiS Cordless Screw Gun is delivered in a convenient plastic case, with a set of 2 Li-ion accumulators, the accumulator charging device and a trial nozzle.
AVIATIONEU NEW ERA product range of multigrade oils motor oils (indicated by the letter "W") aim to ensure proper operation of the engine, wear and damage protection of different types of petrol, gas and diesel engines installed in passenger cars, vans and trucks. They contain a low-viscosity motor oil as well as various polymer additives. The additives have little effect at low temperatures, but cause the oil to thin down in hot conditions more slowly than usual.They come in different viscocity (SAE) grades to cover respective oil viscosity needs in different temperature ranges. In addition to SAE, AVIATIONEU NEW ERA motor oils comply with American Petroleum Institute (API) service rating classification system of passenger car and commercial automotive motor oils. It certifies that an oil meets certain Original Equipment Manufacturer (OEM) quality and performance standards. Depending on their API classification, AVIATIONEU NEW ERA motor oils aim to provide improved high temperature deposit protection for pistons, more stringent sludge control, and seal compatibility. Oils are offered in different packing options. Please contact us for additional information.
Floating nut plates are low profile and lightweight nut plates used to install a captive nut behind a panel. The floating nut plate (aka anchor nut) allows for an assembly that is not perfectly aligned.
MS21059/MS21060 Series nut plates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers they are floating low height self-locking, two lug anchor nuts. Those included in MS21059 series are manufactured from cadmium plated carbon steel while the MS21060 nutplates are produced from corrosion resistant steel (CRES) and silver plated. They are available in different Unified thread sizes, with plain or countersunk rivet holes on each side and come with or without a dry film lube.
Nut plates with a dry film lube are specified by the letter "L" in the part number. Nut plates with countersunk rivet holes are specified by the letter "K" at the end of the part number.
Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.
(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners.
AVIATIONEU NEW ERA ASTM A193 Grade B6 Series stainless steel stud bolts are manufactured from the ferritic grade AISI 410 stainless steel and can be heat-treated and machined to minimum of 110-ksi or 760 Mpa tensile strength. Like other fasteners in this seies, apart from their high tensile strength, they exhibit excellent resistance to corrosion, durability as well as a long functional work life. They can be used in different applications in industries that demand high tensile strength and corrosion resistance. Sourced by certified manufacturers they are competively priced and offered in different diameters and lengths. Sold by the piece (pc.) in increments of 10 pieces with Minimum Order Quantity (MOQ) 100 pieces. Appearing price is for reference only and differentiates based on wanted bolt sizes. Please contact us for a quotation.
AVIATIONEU NEW ERA product lines of Aircraft MRO Equipment expand our own label porfolio of quality supplies. They include Tooling and Ground Support Equipment (GSE) intended for use primarily by Aircraft Maintenance, Repair and Overhaul facilities (MROs). Manufactured by selected co-operating quality manufacturers, they are convenient to use, designed for long service life, competitively priced and carry other benefits related to AVIATIONEU NEW ERA products. Currently offered product lines indicatively include trolleys, hoisting and clamping devices, sling and testing equipment, pumps, servicing oil carts as well as installation/removal equipment for various aircraft components. Customisation to specific requirements is also possible in certain cases. For more information please refer to individual product presentations or contact us.
AVIATIONEU NEW ERA drill type pneumatic sanders provide cost-effective solutions for stripping and grinding of metals in a wide range of applications. They are robust, durable, powerful and reliable tools, offered as pistol (PM-33-140) or direct sanders (PMZ-31-250, MP-006, PMZ-01-17000) and they can operate with different sander attachments such as abrasive wheels, burrs, metal brushes and others.
The PM-33-140 pistol sander was developed for the aerospace industry and is designed to work on high-strength steels, cast iron and non-ferrous metals.
The PMZ-31-250 direct sander has been designed for stripping and grinding of metal parts during assembly and repair works.
The MP-006 direct sander can be used for processing and grinding of molds and dies as well as for cleaning and surface finishing of parts and welds. This lightweight comfortable pneumatic direct sander with rotation speed 30000 rpm provides high quality processing.
The PMZ-01-17000 direct sander is intended for use in cleaning metal surfaces, for the treatment of weld seams and edges while it can also be used for the processing of solid wood and plastic. This easy and compact direct pneumatic sander is useful for working on hard-to-reach surfaces and confined spaces.
AVIATIONEU NEW ERA Steel Spring U-Type Nuts are equivalent to popular A.RAYMOND/TINNERMAN® part numbers. They are are self-retaining fasteners providing an easy and fast attachment of mating panels. They are intended for use in many applications including aerospace, marine, automotive, appliances, panel assemblies, HVAC, electronics, utility vehicles and lighting equipment. They are offered for different screw sizes to comply with panel thicknesses.
Manufactured from SAE 1050 or higher Carbon Steel with a Black Phosphate finish, they combine the robustness of a traditional mechanical fastener and the versatility of spring steel clips to create a value-added panel assembly solution.
AVIATIONEU NEW ERA Steel Spring U-Type Nuts are sold in packs of different number of nuts according to the selected part number. The number of pieces per pack is indicated after the letters "PK" in the product SKU. They provide a cost effective solution to respective A.RAYMOND/TINNERMAN® products.
AVIATIONEU NEW ERA extruded rectangular bars from 5052 aluminum alloy are competitively priced, sourced from certified manufacturers, produced as per ASTM specification and offered as Fabriacted (F) or H112 tempered. Used in aviation and industrial applications. They are available in dimensions 3.0 mm (1/8') -100 mm (3-15/16") × 10 mm (25/64") -300 mm (11 13/16") and length up to 12000 mm (12 m). Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 1 US Ton. Sea/sea-surface transport to destination. Appr. time for shipping: 1 month from the time of order payment. Appearing price is indicative per unit of sale. Please contact us for for additional information and quotation.
Our Quick Guide for Aluminum Alloys & Tempers is now available. Please see attached file.
Extending our AVIATIONEU NEW ERA range of metal products, 15CDV6 Alloy Steel metals are now offered as part of AVIATIONEU NEW ERA product portfolio in different forms (tubes, bars, sheets and plates). 15CDV6 is a chromium-molybdenum-vanadium heat treatable steel alloy which combines a high yield strength (superior to SAE 4130) with good toughness and weldability. 15CDV6 can be readily welded with very little loss of properties during welding and without the need for further heat treatment. This alloy is used in the aerospace and motorsports industries in components such as roll cages, pressure vessels, suspensions, rocket motor casings, wish bones and subframes. Depending on the selected form, AVIATIONEU NEW ERA 15CDV6 Alloy Steel metals are offered in different conditions/specifications (*) and thicknesses, widths and lengths to meet the application requirements. Sold in pieces in cut to order dimensions. For substantial quantities, orders can be placed in tons for higher discounts. Please refer to available dimensions offered for individual products or send us your RFQ for a quotation.
(*) Indicative Conditions/Specifications: WS 1.7734, 15CrMoV6, AIR 9160C, LN 668/MN 1013 (round bars), ASNA 3108/DIN 65389/DIN 65390 (sheets and plates), LN 9369/TE014 (tubes)
AVIATIONEU NEW ERA SC screw lug type battery terminals are available in three versions: SC(JGA), SC(JGY) and SC(JGB). Please refer to the specifications table. They are made from brass (99.7% copper), tin plated and can be used with wire sizes 1.5-1000mm2 in a wide range of applications. Operating Temperature: :-55 to 150 deg. C. Sold in packs of 100 pieces each with Minimum Order Quantity (MOQ) 25 packs. The appearing price is for reference only. Please contact us for quotation.
The petroleum-based MS-8P Oil (МС-8П ОСТ OST 38.101163-78) is the most widely used mineral oil with a set of highly effective additives. It is produced from West-Siberian and Ural crude oil. It is intended for use in gas turbine engines of subsonic and supersonic airplanes and helicopters (Il-62, Il-76, Il-86, Tu-134, Tu-154 and Yak-40 civil aviation aircraft, MiG-21, Su-15 and Su-25 military aircraft and Mi-6 and Mi-7 helicopters) where the temperature at the outlet of the engine does not exceed 150 ºС. The MS-8P oil is designed as a replacement for MK-8 and MK-8P oils, considerably surpassing them on a number of operational characterisics including viscosity at low temperatures, thermal oxidation stability and service life. The shelf life of MS-8p oil is 5 years from the date of manufacture.
MS-8P Oil is offered as part of AVIATIONEU NEW ERA product line in different packaging options. Please contact us for additional information.
MS-8P Oil Applications
Used in oil-mixtures with MS-20 oil (in proportions 25:75, 50:50 and 75:25) in turboprop engines for An-12, An-30, An-32 and Il-18 aircraft, as well as and as a conserving agent for the aircraft engine oil systems (engine preservation).
Used in ship gas-turbine installations and in gas-distributing units.
AVIATIONEU NEW ERA Hexagon Socket Head Screws are made of Carbon Steel, Alloy Steel with a Black Oxide or Galvanized finish (depending on the P/N) and a strength class of 4.8 or other as specified by the letter "S" in the P/N. They are fully threaded, coarse type, and produced by certified manufacturers in accordance with DIN 7984 standard. They are offered in competitive prices in different diameters ("M" designated), indicating the screw's diameter in mm and lengths in mm. The thread pitch (the distance between threads measured along the length of the screw) expressed in mm is indicated by the "P" designation in the P/N. Sold in packs of 500, 250 or 50 pieces depending on the selected product. The number of pieces included in each pack is mentioned after "PK" designation.
AVIATIONEU NEW ERA MIL Standard MS5015 series connectors are available in plug or receptable types and meet MIL-C-5015 specification. They ensure high electrical capability and durability at an acceptable cost and can be used for a range of applications including military ground support equipment, aircraft installations and others. Available in different case sizes (10SL,14S,16S,18,20,22,24,28 and 32) and sold by the piece (pc.).
Shock: 490 m/s2
Relative humility: 95+-4% at 40℃
Insulation resistance: 5.000 Mega ohms minimum (at 25°C)
Frequency Range: 10-2000Hz/147m/s2
Voltage Rating: 500VAC 700VDC
Mating Type: threaded coupling
Termination : Solder
Durability (mating) ≧ 500 cycles
Temprature Range: -55°C ~ +125°C
Sourced from quality manufacturers, the aviation headsets included in the AVIATIONEU NEA ERA product lines are offered in different series and models for aeroplanes and helicopters. They range from the low cost, entry level PH-100 series PNR and ANR models, ideal for flight schools, to the PH-400 series high performance, ultra light carbon fiber PNR and ANR headsets weighting only 9oz (255g) for use in airlines and military operations. With their competitive prices, advanced design and features, quality materials and rigid construction, AVIATIONEU NEA ERA headsets combine performance, functionality and comfort to provide cost effective solutions for every need.
Although AVIATIONEU NEA ERA PH-400 series headsets are intended for use in air transport and military operations they can equally serve the needs of demanding general aviation pilots who seek high performance, functionality and confort headsets with an ultra light weight. The PH-400A/PH-400AH headsets feature a modern design, 23dB passive (PNR) noise reduction capability, robust construction (carbon fiber shell), a fully adjustable spring steel headband, faux leather ear cushions for extra comfort, noise-canceling electret (or optionally, dynamic) microphone with a 270 deg. rotatable boom, premium speakers and microphone for crystal clear audio and standard S/M switch, with dual volume control knobs on the control module. PH-400A headset for aeroplanes comes with PJ-055 and PJ-068 dual plugs while PH-400AH model, for helicopters, includes a military grade U174 plug and a tough, durable coil cord. Both headsets are available in carbon fiber black color, they are accompanied by our Certificate of Conformance and come with a 12-month warranty. AVIATIONEU NEA ERA PH-400 series also includes headsets with active (ANR) noise reduction and optional Bluetooth capabilities. Please refer to additional information in the individual product presentations or contact us.
AVIATIONEU NEW ERA SAE 100R Series hydraulic hoses are composed of a synthetic rubber tube, steel wire braid reinforcement and an outer rubber lining. The inner rubber tube transfers the pressure to the medium, lining protects the steel wire reinforcement from corroding while the outer rubber lining protects the steel wire from wearing. These hoses feature use of synthetic rubber with excellent oil & heat aging resistance, fatigue resistance and high weaving, winding hose length. They can be used for a wide range of industrial applications from mine hydraulic support and engineering constructions to ships, agricultural machinery, machine tools. Suitable for transfer of mineral oil, dissolvable oil,hydraulic oil,fuel and lubrication oil, water base liquids etc. They are offered in different diameters and meet different working pressure and temperature requirements. Operating Temperatures: Oil: -40°C to +100°C, Air: -30°C to 50°C, Water Emulsion: up to +80°C.
Unit of measurement is the meter. They are sold in rolls of 50 meters each with Minimum Order Quantity (MOQ) 5 rolls. Appearing price is for reference only per meter. Please contact us for a quotation.
AVIATIONEU NEW ERA 4130/4140 ASTM A519 seamless carbon and alloy steel round tubes are sourced from certified manufacturers, they are competitively priced and can be used in mechanical engineering applications and machinery. They are offered in different sizes of wall thickness, outer diameter and cut length, in various heat treatment processes, tube forming methods and delivery conditions. Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 5 US Tons. Sea/sea-surface transport to destination. Approximate time for shipping: 2 months from the time of order payment. Appearing price is indicative per unit of sale. Please refer to the attached chart for additional information and contact us for quotation.
AN hex head bolts in different series are offered under AVIATIONEU NEW ERA product series. Sourced from quality vendors, these bolts are manufactured to the US Army-Navy (AN) standard, predecessor to Mil-Spec (MS), superseded by the National Aerospace Standard (NAS). Commonly used in aviation for either tensile/shear load applications. Made from high-strength type 4037 or 8740 alloy steel or 431 Stainless Steel (CRES) and cadmium plated for superior corrosion resistance (compared to commercial grade zinc plated bolts) they are offered with shank drilled for cotter pin or undrilled for stop nut application, and with a drilled head for safety wire or without. Minimum Tensile Strength (Steel and CRES) - 125,000psi. The length of AN aircraft bolts is measured from under the head to the end of the shank. The "grip" is the unthreaded portion of the shank. Threads are pressed into the steel, not cut, thus maintaining strength throughout the entire shank. The surface under the head of AN bolts is designed to be a bearing surface to reduce non-uniform stress as the bolt is torqued thus reducing premature fatigue. The following letters are used in the product part numbers.
"A" after the dash number for bolts with undrilled shank
"C" for bolts made of 431 Stainless Steel (CRES)
"H" after the AN number for bolts with drilled head (eg. AN5H-15)
AN3 through AN20 Series bolts are superseded by NASM3 through 20 Series. The part numbers in both series have not been changed.
AN3 through AN20 (REV. 12), Military Specification Sheet: Bolt -Machine, Aircraft [superseded by NASM3 through 20]. This specification covers aircraft machine bolts part numbers, AN3, AN4, AN5, AN6, AN7, AN8, AN9, AN10, AN14, AN16, AN17, AN18, and AN20. AN3 THRU AN20 is canceled and superseded by NASM3 THRU NASM20. The Part Identification Number (PIN) for AN3 THRU AN20 REV. 12 and the part number for NASM3 THRU NASM20 are identical. The part numbers have not been changed.
AVIATIONEU NEW ERA frames for storage of aircraft engine pylons are offered as part of our own label product portfolio of Aircraft MRO Equipment and they are indispensable equipment for any Maintenance, Repair and Overhaul (MRO) facility.
Different pylon storage frames are offered corresponding to diffent aircraft engines. The PN: 460007240 98A54003003000 frame is intended for use to handle and store pylons of GENERAL ELECTRIC (GE) and PRATT & WHITTNEY (PW) aircraft engines. For more information and a quotation please contact us.
Aluminum alloy 7075 is another "aircraft grade" aluminum which, like aluminum alloy 2024, is typically used in aircraft, missiles, spacecraft, and other defense applications. Its principal alloying ingredients are zinc and copper, which make it one of the highest-strength aluminum alloys that are available. Its typical strength in the T6 temper is higher than most mild steels. 7075 also has average-to-good ratings for machinability, corrosion resistance, and anodizing response.
AVIATIONEU NEW ERA heat treated aluminum sheets from 7075 alloy are are sourced from certified manufacturers, they are competitively priced and offered in various tempers such as T6 and T651 to be used in a range of aviation and industrial applications. Available in different thicknesses, widths and lengths. Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 1 US Ton. Sea/sea-surface transport to destination. Approximate time for shipping: 1 month from the time of order payment. Appearing price is indicative per unit of sale. Please contact us for for additional information and quotation.
Our Quick Guide for Aluminum Alloys & Tempers is now available. Please see attached file.