The 114 series C-Type compression riveters from the U.S. INDUSTRIAL TOOL COMPANY (USIT) can be used for assembly operations in aircraft, automotive, truck,bus components, boats, metal furniture, toys, electronic chassis & appliance assembly. One man operated, USIT rivet squeezers increase productivity securing high joint integrity with no dependance on operator's skill level. Available in standard and high output configurations. CE certified. They feature tandem cylinder doubling compression force available from tool, rolling cam and wedge assembly multiplying compression force of piston, "squeeze" action with throttle controllable speed permiting easy control, exceptional accuracy and uniformity & swivel air inlet aiding maneuverability. They develop full squeezing force at 90 P.S.I. 

AVIATIONEU NEW ERA Screw Extraction Kit is intended for use as a removal tool of stuck or broken screws, bolts or studs.

The kit consists of a 6-piece standard screwdriver set and a T Type steel single sided ratchet wrench adjustable to handle fasteners of M3 to M8 sizes. 

It is a high quality, versatile, convenient, efficient and long service life kit that can be used for home and professional applications in bikes, cars, electronics, household appliances, mobile repairs and other uses.

The 6-piece standard screwdriver set and the ratchet wrench can be bought separately although the kit provides a cost effective solution.

Economy models of gauges for shop rivet heads and rivet lengths are available from ATS.

ATS rivet head gauges are offered as a set of four gauges for -3, -4, -5, & -6 rivets. Each gauge measures MINIMUM height and MINIMUM diameter of shop heads AFTER setting. Works for measuring both universal head and flush rivets. Color coded anodized finish.

ATS rivet length gauge measures -3, -4, -5 & -6 rivets. Used to check length of rivets BEFORE setting. Works with universal and flush head rivets.

The set of rivet head gauges and the length gauge can be ordered as kit or separately.

Countersinking is used to ensure that flat head screws or fasteners sit flush against the workpiece. ATI® TOOLS High Speed Steel (HSS) integral pilot countersink cutters are manufactured of M2 high-speed steel or carbide-tipped. They can be used with ATI® TOOLS ATI444 or ATI443 Series microstops. Offered in different pilot diameters, number of flutes and body diameters. Sold in pieces or as sets with other countersink cutters.

Product Features:

High speed steel (HSS) countersinks ground on-centers to insure concentricity

1/2" Body diameter

Integrated pilot of different sizes in inches

2 Flute

120-degree seating angle for standard fit

100 degree cutting angle

1/4-28 Male threaded shank

Please consult the supplied documentation.

USATCO C-yokes are available for different mounting spacings and furnished with .187” or .250” set holes. Please refer to the attached catalog page and contact us for additional information.

The OMEGA TECHNOLOGIES plier-operated KSG series is designed to clamp material together where no holes are available. Ideal for bonding, gluing and sealant operations, these clamps work well with all types of material. The larger surface area minimizes scarring while its spring-loaded mechanism prevents over-tightening. Avalable in different jaw depths and material thicknesses in inches. Sold in increments of 10 pcs.

Countersinking is used to ensure that flat head screws or fasteners sit flush against the workpiece. Countersinks used in aerospace and industrial applications are made of durable materials such as High Speed Steel (HSS) known for its hardness, toughness, and ability to withstand high temperatures. High Speed Steel (HSS) countersinks are well suited for cutting aluminum sheet metals. When combined with Cobalt, an alloying agent in steels to improve the hardenability, strength, and wear resistance in machining applications but also due to its ability to resist wear at higher temperatures, the  respective countersinks are often used for cutting stainless steel and other aluminum alloys.

Sourced from quality suppliers, integral (fixed) pilot Microstop countersink cutters are offered as part of our own labeled (AVIATIONEU NEW ERA) product lines. Made from HSS or HSS Steel with Cobalt, they consist ideal tools for aircraft manufacturers, aircraft maintenance/ repair stations or  industrial manufacturers for precise and accurate countersinking, cost-effective alternatives to other OEM products and and stocked by our suppliers for fast deliveries. 

Offered in different flutes, body and pilot diameters and sold  either separately (*) or in custom sets to address specific customer needs in machining applications.

Because of the difference in composition between HSS and Cobalt, main strengths of HSS countersinks are their high hardness and wear resistance. Therefore, as a general rule, they consist a better choice when you want your countersinks to retain their strength even when exposed to extreme wear or abuse. For higher hardenability, strength, and wear resistance and in applications when when countersinks are to be exposed to extremely high temperatures, cobalt countersinks should best be used.

AVIATIONEU NEW ERA countersinks can be used with popular adjustable or Microstop countersinking units utilizing a threaded shank drive (sold separately). For additional information please consult the supplied documentation or contact us.

(*) Minimum Order Quantities apply depending on the selected countersinks or their sets.

AVERY TOOLS (*) manufactures and supplies gauges for shop rivet heads and rivet lengths.

AVERY TOOLS rivet head gauges are offered as a set of four gauges for -3, -4, -5, & -6 rivets. Each gauge measures MINIMUM height and MINIMUM diameter of shop heads AFTER setting. Eliminates guessing if your rivets are properly set. Works for measuring both universal head and flush rivets. Precision machined to size from 2024 aluminum. Rivet size permanently stamped on each gauge. Color coded anodized finish.

A rivet length gauge is also available to check for proper length of rivets BEFORE setting and can be ordered separately or as kit with the head gauges. 

(*) AVERY TOOLS aviation tools and products are now available only through retail suppliers.

A complete spark plug gapping solution for field or bench use by AIRCRAFT TOOL SUPPLY COMPANY (ATS). Includes the Heavy Duty Spark Plug Gapping Tool to accurately set your spark plug gaps to within 0.001". Also included is an Electrode Erosion Gauge to make sure that your gapped plugs are still in serviceable condition.You also get a set of wire feeler gauges to verify gap size. In case of an accidental over-gap of the plug, the included Gap Expansion Tool will get you back on track. Compatible with all Champion, and AutoLite Massive Electrode Spark Plugs. The complete kit includes:

1 X Gapping Tool

1 X Feeler Gauge

1 X Erosion Gauge

1 X Gap Expansion Tool

RIPLEY® UTILITY TOOL® WS 64 Series 5-35 kV adjustable cable strippers can be used for cable jackets & secondary & primary cable insulations.

Product Features & Specifications:

Compact, universal tool for stripping the end or mid-span on cable outer jackets & insulation materials with diameters from 0.5″ to 2.5″ (12.7 mm to 63.5 mm)

"Dual-position" jaw for removal of the outer jacket on primary power cables with all major insulation shields

Blade design provides an easy & efficient stripping operation with minimal effort, as well as a spring-loaded trigger-action jaw for quick cable diameter adjustments

Rugged, all metal construction & micro adjustable blade for a variety of jacket thicknesses (Blades are sold separately)

Material: Aluminum

Length: 8″ (200 mm)

Weight: 1.9 lb (860 g)

NOTE: RIPLEY® UTILITY TOOL® QC-2 Series Heavy-Duty Quick Clamp is a required accessory tool sold separately.

Rivet Pin Gauges from HI-SHEAR CORPORATION,  subsidiary of LISI AEROSPACE, can be used for inspection or measurement of correct grip length of HI-LITE™ / HI-LOK™ rivet pins. Different HI-SHEAR Pin Protrusion Gauges are offered for respective HI-LITE™ / HI-LOK™series pins. HI-SHEAR Grip Gauge Assemblies can be used to measure the “grip length” of HI-LOK™ and HI-LITE™ pins, shear lockbolts, structural screws and bolts. The HI-SHEAR 2-651 Grip Gauge Assembly includes one HI-SHEAR 2-612 Grip Gauge & one HI-SHEAR 2-615 Grip Gauge Slide. The 2-612 Grip Gauge measures in increments 1/16” to 3”(1 mm to 75 mm). Made from spring temper stainless steel, 3/4" x 6-1/4".

ATS 707X series dimpling pliers are produced from sturdy vise grip(r) pliers which allow you clamping down with over 3,500 lbs. of force. They use standard dimple die with .187" shank. 1" reach. One pair of pliers and three additional sets of dies for use with 707X series pliers can be ordered separately to have four tools in one. Available in different dimple sizes in inches.

USATCO C-Yoke riveters are available in single cylinder and tandem cylinder types, both in standard and high force versions. They cover different capacity requirements for use in aluminum and steel and feature quiet, easy operation, CE approval and swivel air inlets. Clamping force exceeds federal specifications.

This top quality TEXTRON LYCOMING Baffle Spring Compressor speeds up the removal & installation of cylinder baffle springs. It eliminates the danger of broken or bent cylinder fins caused by use of screwdrivers and punches. This tool is easy to use and features two pivot locations for parallel and angle valve cylinders.

High-Speed Steel (HSS) is a metal alloy made up primarily of iron, tungsten, and carbon. It's known for its hardness, toughness, and ability to withstand high temperatures without losing its strength or shape. It also has excellent abrasion resistance properties, which make it useful for cutting tools. HSS drill bits are extremely hardwearing and particularly well designed for drilling into relatively hard metal surfaces and wood, as they are much more resistant to the heat generated from the fast speed operation. The front edges cut the material, whilst the spirals remove debris from the hole. Apart from HSS, Cobalt is often used as an alloying agent in steels to improve the hardenability, strength, and wear resistance in machining applications but also due to its ability to resist wear at higher temperatures while still maintaining its strength and shape. Cobalt-based alloys are typically harder than HSS alloys but are also more prone to cracking or chipping if not handled properly. Compared to HSS drill bits which are more elastic and, as such, don't break easily, those containing cobalt are more brittle and chip quickly.

Sourced from quality suppliers, threaded hex shank drill bits are offered as part of our own labeled (AVIATIONEU NEW ERA) product lines. Made from HSS or HSS Steel with Cobalt, these drill bits consist ideal tools for aircraft manufacturers, aircraft maintenance/repair stations or  industrial manufacturers, cost-effective alternatives to other OEM products and and stocked by our suppliers for fast deliveries. Offered in different types (stub, short or long), flute and overall lengths they are sold either separately (*) or in custom sets to address specific customer needs in machining applications.

Because of the difference in composition between HSS and Cobalt, main strengths of HSS drill bits are their high hardness and wear resistance. Therefore, as a general rule, they consist a better choice when you want your drill bits to retain their strength even when exposed to extreme wear or abuse. For higher hardenability, strength, and wear resistance and in applications when when drill bits are to be exposed to extremely high temperatures, cobalt drill bits should best be used.

For additional information please consult the supplied documentation or contact us.

(*) Minimum Order Quantities apply depending on the selected drill bits or their sets.

CELESA BLUE-MASTER self-tightening (keyless) industrial chucks for column or CNC drilling machines. Do not require a key for tightening or loosening. They incorporate a self-tightening feature that causes them to grip tighter as more torque is applied. Product line includes high precision (DC1), industrial (DC2) and industrial light-weight (DC3) chucks of different min/max openings of jaws, arbors (A), arbor diameters (D2) and chuck lengths (L1) in mm. Please refer to the illustrated models.

The BAUER™ electric drills from HARBOR FREIGHT TOOLS are offered in different cord and cordless (battery) models and are intended for use in diffrent applications. Their all-metal gear construction ensures heavy duty performance with daily use. They also feature high performance motors to cover drilling, and fastening jobs, a compact lightweight design to minimize user fatigue and textured overmolds for secure grip and comfort.  Cordless models are available as unit only or as kit with battery, charger and/or other accessories.

Model 189SC-B 20v Lithium-Ion Cordless 3/8 In. Right Angle Drill  is the perfect configuration for drilling between studs and joists or other close-quarters work. The balanced right angle design is compact yet delivers a variable speed range of 0-650/0-2000 RPM. The LED provides a clear view in dark spaces. Compatible with all BAUER™ 20v Lithium-Ion tools. 

Model 1791C-B1 20v Lithium-Ion Cordless 1/2 in. compact  Drill/Driver Kit features a 2-speed selector matching speed and poer to application. It comes with 1.5Ah battery, charger, 2 impact bits and a rugged tool bag.

Model 1695E-B  is a 13  Amp 2-Speed 1/2 in. Heavy Duty Right Angle Drill Kit features a 2-speed selector (450/1750 RPM), a low gear clutch and comes with  a rugged tool case.

AVIATIONEU NEW ERA pneumatic drills provide cost-effective solutions for drilling, boring or other works on different materials to cover the needs of a wide range of applications in aviation and other industrial sectors.They are robust, durable, powerful  and reliable tools, offered in pistol or other types, in various rotation speeds and drilling diameters capacities. Depending on the model, AVIATIONEU NEW ERA pneumatic drills are intended for use with high or medium hardness materials as well as for specific uses.  Some drills are also suitable  for working on hard-to-reach surfaces and confined spaces. Please refer to the technical specifications of individual drill or contact us for additional information.

ERNEST H HILL LIMITED (HILL PUMPS) is a manufacturer of fluid transfer equipment for automotive and industrial lubrication, petrochemical, industrial, agricultural and aerospace fluid transfer applications.

HILL supplies a comprehensive range of pumps, lubrication, garage & workshop equipment to all types of industries, from aviation & agricultural pumps to industrial and automotive servicing equipment.

HILL pumps are designed for use with chemicals, oils, AdBlue/UREA, water, diesel, antifreeze, grease, gear oil. Their food grade approved pumps are intended for use within the food and drink sector. Apart from pumps HILL supplies  an extensive range of garage equipment such as hose reels and waste oil drainers. 

For additional information on HILL PUMPS products please consult the supplied documentation or contact us.