An integral part of INNOSPEC Inc., INNOSPEC FUEL SPECIALTIES business unit is a leading developer and supplier of specialty additives for petroleum-based fuels, coal, and biofuels used in a diverse scope of applications.

Corrosion Inhibitor additives form part of INNOSPEC FUEL SPECIALTIES product lines. They are designed to protect against internal corrosion of fuel storage and distribution systems  and they are used extensively in storage, pipeline and aviation applications.They protect against storage vessel and pipeline leakage, contamination of fuel with particulates and blockage of filters and screens from corrosion material. 

INNOSPEC’s approved aviation fuel Corrosion Inhibitors/Lubricity Improvers (CI / LI) serve a dual function, they improve the fuel’s lubricity as well as protecting the fuel system against corrosion.Two products in the INNOSPEC’s DCI product range (DCI-4A and DCI-6A) hold numerous approvals for aviation fuel usesare approved for use in jet fuels. DCI-4A is a preferred inhibitor for aviation fuels while DCI-6A, a ‘stronger’ corrosion inhibitor than DCI-4A is preferred for all ground fuels and for pipeline corrosion protection, due to its low treat rate.

INNOSPEC's STADIS® aviation fuel Static Dissipators  aim to enhance safety by preventing static charge build up when refining or handling fuels. STADIS® 450 is a non-metallic distillate fuel additive that increases the electrical conductivity of distillate fuels and helps reduce hazards associated with mixing, transfer, and shipment of distillate fuels. It is is the premium static dissipator additive (SDA) in use today and  the only SDA approved worldwide for use in civilian and military aviation turbine jet fuels. STADIS® 425 is ntended for use in  ground fuel applications and specifically designed for use in applications such as diesel fuels and gas oil.

For more information please refer to the Product Description section and the supplied documentation. 

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates. CHEMETALL® ARDROX® brand is the leading brand for aerospace surface solutions including paint and scale removers, exterior aircraft & gas turbine engine compressor cleaners, corrosion inhibiting and non-destructive testing protective compounds for both aircraft and aero engines and materials.

CHEMETALL® ARDROX® Corrosion Inhibiting Compounds' (CIC) range includes AV 8, AV 15 (aka DINITROL AV15), general purpose AV 25, the most versatile AV 30 and AV 40.  They are water displacing, long-term corrosion inhibitors highly  penetrating  areas exposed to severe corrosion conditions and combining good penetration properties with excellent corrosion inhibiting characteristics and a low applied film weight. Their viscosity is optimized to ensure an effective protective coating and promote penetration into otherwise inaccessible areas of the airframe. Applied as a coating to protect metals in airframe structures, on painted and unpainted surfaces, and in aerospace components to safeguard metals from corrosion. In areas exposed to severe corrosion conditions AV 8 should be overcoated with AV 100D - a heavy duty, waxy, firm film CIC.

CHEMETALL ARDROX® CIC are offered in different packaging options and comply with different specifications including Boeing BMS, MIL-PRF-16173, McDonnell Douglas DMS, Airbus AIMS and others. They are classified as HAZMAT Hazardous Materials UN Number: UN1139 - UN Class: 3.

CHEMETALL ARDROX® 3140 Corrosion Preventative contains film forming agents, antioxidants and corrosion inhibitors in a refined hydrocarbon solvent base. Provides long term protection for raw materials, sub-assemblies and finished components, which are to be stored or used in corrosive environments. 

CHEMETALL ARDROX® 6367 Turbine Engine Cleaner is a liquid concentrate which consists of an aqueous blend of biodegradable surfactants and corrosion inhibitors formulated to clean the compressor sections of gas turbine engines. It is solvent free and removes deposits, oils and their oxidation products in the compressor area. Contains corrosion inhibitors providing protection against corrosion for up to 3 days during engine standstill times. Does not contain any EDTA, NTA or their salts. Regular cleaning with Ardrox® 6367 helps maintain peak engine efficiency and reduces maintenance and fuel cost. Ardrox® 6367 is compatible with recognized antifreeze materials used during cold weather cleaning. Approved for use in a range of turbine engines including CFM56 CP5060 , GE SPM 70-80-04, Ref. C04-140, P&W SPM 70-12-00, SPMC 87-10A, Rolls Royce CSS 260 and others. Offered in different packaging options including 25-liter pails and 55 USG drums.

For additional information please consult the Product Description section or the attached documentation.

DONALDSON® COMPANY INC. is one of the largest filtration manufacturers in the world, providing filters and filtration components for a wide range of applications including commercial airliners, military applications and general aviation aircraft, agriculture and forestry, construction, mining,  truck, and bus manufacturers as well as other markets.

DONALDSON® AEROSPACE FILTRATION (AFS) cleaners/degreasers and oils are used in inlet barrier filters to bring the filters back to full capacity after their cleaning process. Offered in 1 US gallon and 5 US gallon sizes. Filter Cleaning Kits are also offered containing 1 US gallon of AFS Oil, 1 gallon of AFS Cleaner/Degreaser, a 16-ounce bottle and spout for re-oiling, a cleaner/degreaser sprayer, and seamer pliers (2-inch and 6-inch).

For additional information please consult the supplied documentation.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA GREASES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA ENGINE HYDRAULIC FLUIDS & PRESERVATIVES and ENGINE OILS please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

CASTROL® is a producer of oils, lubricants, fluids and greases for a wide range of applications. The company aerospace product range includes  lubricants, fluids and cleaners. Acquired by BP in 1992.

The CASTROL® BRAYCO™ product range includes world-leading choice synthetic oils and greases proven to perform in extreme environments increasing the lifespan of crucial equipment and delivering reliable performance in every critical application. Offered BRAYCO™ range of products features low outgassing and low volatility lubricants designed to virtually eliminate lubricant outgassing, Perfluoropolyether (PFPE) lubricants ideal for vacuum, cleanroom and reactive chemical environments and applications as well as formulations for deep sea applications that actually absorb low levels of seawater and carry it away from sensitive components.

For additional information on CASTROL® BRAYCO™ product portfolio please refer to the brief presentations included in the Product Description section and the supplied documentation.

SOUTHWESTERN PETROLEUM LUBRICANTS LLC. (SWEPCO) is a manufacturer of technologically advanced lubricants that protect equipment assets in even the most severe operating conditions while helping companies around the world reduce overall operating costs through increased uptime and productivity and lowering maintenance and lubrication expenses. SWEPCO brand lubricants and specialty compounds are used in a wide range of applications serving the needs of Construction, Mining, Manufacturing, Marine &Transportation industries. For additional information on SWEPCO products please consult the Product Description section and the supplied documentation.

Petroleum distillates include a range of products such as mineral oils, naphtha solvents, heavy fuel oils, waxes, benzenes and others used in many industrial and other applications. They are offered as part of our own labelled (AVIATIONEU NEW ERA) product portfolio or as OEM products (separately listed).

Naphtha Solvents are chemical product comprised of volatile and extremely flammable liquid hydrocarbons  derived from the refining of crude oil but can also be produced from natural gas condensates or petroleum distillates. Naphtha solvents are very strong and versatile, often used in hydrocarbon cracking, laundry soaps, and cleaning fluids among other applications. Those conforming to Mil-Spec TT-N-95 or its latest Rev. B (TT-N-95B) are aliphatic naphtha acrylic cleaning solvents available in Type I or Type II for use in organic coatings and as a cleaner for acrylic plastics. Usual packings include 1 USG cans, 5 USG pails or 55 USG drums.

PHILLIPS 66® Company is among the largest refiners in the U.S, a major contract jet and avgas fuel supplier to private, commercial, and military aviation and a producer of industrial oils. The Phillips 66® line of aviation lubricants approved by the FAA and leading engine manufacturers includes premium single and multiviscosity piston engine oils and  highest quality hydraulic fluids compatible with other brands. They can be used in diverse climatic conditions. PHILLIPS 66® protective additive packages exceed industry specifications.

Some of PHILLIPS 66® aviation lubricants listed below are offered through our Web Platform for Supplies. Others, not currently listed, can also be furnished through our network of co-operating suppliers. For more information please refer to the Product Description section, the supplied documentation or contact us.

PHILLIPS 66® Aviation & Industrial Oils

PHILLIPS 66® X/C® Aviation Oil, Ashless Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines

PHILLIPS 66® VICTORY® Aviation Oils

VICTORY® Aviation Oil 100AW, Ashless Dispersant, Single-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)

VICTORY® Aviation Oil AW 20W-50, Ashless Dispersant, Multi-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)

VICTORY® DIESEL Aviation Oil 10W-40, Fully Synthetic Aviation Engine Oil for Aircraft Compression Ignition Engines

PHILLIPS 66® TYPE A Aviation Oil, Ashless Dispersant, Single-Grade Engine Oil for Aircraft Piston Engines. Available in two grades, 100AD (SAE 50) and 120AD (SAE 60)

PHILLIPS 66® TYPE M Aviation Oil, Non-Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines

PHILLIPS 66® Reference Oil 50

PHILLIPS 66® Food Grade White Mineral Oil for use in food processing plants, consumer products, and in other applications.

McGEAN CEE-BEE™ and HONEY BEE™ Lavatory Maintenance product portfolio includes CEE-BEE™ extensive range of cost-effective top-performing cabin cleaners, deodorizers and fresheners available in a variety of formats and HONEY BEE™ toilet system cleaners, the most effective in the industry in removing scale and organic deposits in both vacuum and recirculating toilet systems. Their use results in clean, well-maintained lavatory systems ensuring reliability, preventing costly flight delays and delivering a pleasant, fresh-smelling environment for travelling passengers. Their waste line, tank & component cleaners are ideal for the maintenance, overhaul and repair of aircraft lavatory systems and component parts. They meet OEM and AMS specification requirements. Respective product lines include:

HONEY BEE™ 60 & 60NP acidic liquid aircraft lavatory cleaners, the first developed for removing hard water scale from vacuum and recirculating toilet systems and the second for removal of hard water scale and accumulated waste materials from toilet systems in aircraft. Both are thickened for better cling on vertical surfaces and can be used for removal of stains from stainless steel. They can be applied directly to scale deposits for local cleaning, eliminating the need for removal of toilet systems. Safe on stainless steel, most plastics and good quality paint.

HONEY BEE™ 60T and 60 TNP, acidic liquid cleaners, the first developed for removal of hard water scale from vacuum toilet system lines, lavatory holding tanks & components in immersion tank applications and the second for removal of hard water scale and accumulated waste materials from vacuum toilet systems in aircraft, preventing waste line clogs. Both can be applied directly to scale deposits in toilet bowls for spot removal and they are safe on stainless steel, acrylic plastic and good quality paint. 60 TNP effectively removes stains from stainless steel lavatory components, titanium waste lines and waste holding tanks. Approved for use with the Cee-Bee® Vacuum Cleaning Kit. Surfactants biodegradable.

Product lines for Lavatory Deodorants, Fresheners & Cleaners include:

CEE-BEE™ Aerofresh 35 Concentrated Lavatory Deodorant & Cleaner

HONEY BEE™ 20C  Highly Concentrated Lavatory Cleaner & Deodorizer

HONEY BEE™ 24 - Powerful aircraft lavatory deodorant 

HONEY BEE™ 26 - Cleaner & Deodorizer for Aircraft Lavatories 

HONEY BEE™ Deodorant Pak 44 -Powerful aircraft toilet deodorant

HONEY BEE™ Aerogel “Sparkle” Air Freshener

HONEY BEE™ Freshener 50 - In-Flight Liquid Cleaner & Deodorizer

HONEY BEE™ Freshener Soak 50C - Lavatory Deodorant

HONEY BEE™ 90 Aircraft Interior Surface Cleaner & Deodorizer

HONEY BEE™ 90 RTU General-Purpose Aircraft Interior Cleaner & Deodorizer

For additional information please consult the supplied documentation.

Manufactured by LIGHTHOUSE FOR THE BLIND INDUSTRIES, SKILCRAFT® PRO LUBE II is a general-purpose lubricating oil preservative formulated to lubricate small arms and automatic weapons, protect them from corrosion, and displace water at low temperatures. This product is approved to Federal Specification MIL-PRF-32033 and meets Quality Parts List (QPL) No. LP-7053A. It is ideal for use within fuel systems and combustion chambers of engines, in addition to other general-purpose lubrication needs.

Available Packaging Options: 12.5 oz. Aerosol Cans, Case 12X12.5 oz. Aerosol Cans, Case 16X1 US Quart Cans

HAZMAT Information: HAZMAT UN Number:1950, Hazard Class 2.2 (Aerosol Can) – Not Regulated (USQ Can)

For additional information please consult the supplied documentation.

AEROSHELL® produces a range of mineral and synthetic hydrocarbon hydraulic fluids, lubricating fluids and preservatives supporting airraft systems' operation and longer preservation.  A non-exhaustive list of offered products is presented below. Additional information is available in the Product Description section. Due to the continuous expansion of our offered product portfolio some AEROSHELL® products may not be listed yet in our Web Platform but they may still be offered through our supply network. Please contact us for additional information or assistance.

AEROSHELL® Fluid 3, general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. 

AEROSHELL® Fluid 12, synthetic ester oil used for general aircraft lubrication as well as for aircraft gyro instrument gimbal bearings, separately lubricated high speed turbines and compressors, aircraft air cycle equipment and electronic equipment. Particularly suitable when an oil with a low evaporation rate is required at high and low temperatures. Approved to MIL-L-6085C.

AEROSHELL® Fluid 31, synthetic hydrocarbon based aircraft hydraulic fluid with greatly improved fire resistance characteristics when compared with conventional petroleum products. Approved to MIL-PRF-83282D.

AEROSHELL® Fluid 41, mineral oil based  "super clean" hydraulic oil manufactured to a very high level of cleanliness and possesses improved fluid properties. It is suitable for use with brake and hydraulic systems with synthetic rubber seals.

AEROSHELL® Mineral Fluid 5M-A, highly refined, medium viscosity mineral oil with an extreme pressure additive and additives for good oxidation and corrosion protection. No longer produced. Limited availability till stock exhaustion. A possible alternative could be NYCO Nycolube 3525 meeting the same specification MIL-PRF-6086F.

AEROSHELL® Fluid 61, synthetic hydrocarbon base hydraulic fluid specifically inhibited to provide excellent oxidation stability for the oil. Approved to MIL-PRF-46170 Type I.

AEROSHELL® Fluid 602, synthetic hydrocarbon coolant fluid for aircraft electronics. No longer produced. Limited availability till stock exhaustion. Consider CASTROL® BRAYCO™ 889 meeting same specification MIL-PRF-87252E .

AEROSHELL® Fluid 71, preservative mineral hydraulic fluid of improved cleanliness. It is composed of a mineral base oil with an additive package which results in a product with excellent corrosion preventative properties as well as excellent oxidation stability, and good anti-wear characteristics.

CRC® INDUSTRIES is a global leader in the production of specialty chemicals for maintenance, repair and operational professionals and do-it-yourself applications. CRC® product portfolio includes an extensive range of cleaners, corrosion inhibitors, lubricants & penetrants, adhesives, appearance and specialty products serving the automotive, industrial, electrical, marine, heavy truck, hardware and aviation markets. Selected products are briefly presented at the Product Description section and additional information can be found in the supplied documentation.

EXXONMOBIL® MOBIL™ AERO Series Aviation Hydraulic Fluids includes AERO HFA, HF, and HFS hydraulic fluids offered for aircraft systems where use of hydrocarbon hydraulic fluids is required. 

They are low viscosity, high VI (viscosity index) fluids with excellent low temperature properties, good anti-wear performance, and good chemical stability.

MOBIL™ AERO  HFA is a premium quality fluid that meets the requirements of the U.S. Military specification MIL-H-5606A (obsolete). It has a very high VI and is suitable for use at temperatures down to -54 ˚C (-65 ˚F). While this quality fluid is no longer used by the US Military, it is still used in some older, small private, and small commercial aircraft. It is also used in industrial and commercial equipment requiring good fluidity at very low temperatures, where MOBIL™ AERO  HFA provides long, trouble-free service over a wide range of

operating conditions.

MOBIL™ AERO HF is a premium quality fluid that is approved against the most current version of U.S. Military specification MIL-PRF-5606. It has physical properties very similar to MOBIL™ AERO HFA, and also meets “super-clean” requirements required by modern aircraft hydraulic systems. It is intended primarily for military aircraft. It is also used as a hydraulic fluid for small private and small commercial aircraft, and as a strut fluid in landing gear of large commercial aircraft. It is approved as a NATO Code Number H-515 fluid.

MOBIL™ AERO HFA and HF are composed of mineral oil base stocks and contain shear-stable VI improvers.

MOBIL™ AERO HFS is a synthetic polyalphaolefin lubricant that is approved against the most current version of U.S. Military specification MIL-PRF-83282. It does not contain a VI improver. It is designed for use at temperatures down to -40˚C (-40˚F). It provides better flammability and volatility, improved stability, but has a higher viscosity at low temperature than MOBIL™ AERO HF. It meets the “super-clean” requirements. It is intended primarily for US Military aircraft. It is approved as a NATO Code Number H-537 fluid.

For additional information please consult the supplied documentation.

Thermal fluids (aka thermal oils, thermic fluids, thermo fluids, heat transfer fluids, heat transfer oils, hot oils, thermic oils or thermo oils.) are specialized liquids used to transfer heat from one point to another in various industrial processes, including chemical processing, oil and gas refining, and power generation. Designed to operate at high temperatures they can provide efficient and reliable heat transfer, even under extreme conditions. Selecting the right transfer fluid depends on its thermal properties, which include its viscosity, heat capacity, the heating system it’s used in, and the application itself.  When dealing with complex applications that may have multiple heat transfer options and therefore specific calculations may be required. Factors such as the temperature and pressure requirements of the application, combined with the thermal properties of a fluid and the limitations of the heater need to be considered. There are different types of thermal fluids including water, glycol, organic (derived from petroleum) and synthetic (produced from advanced chemical processes) offered under respective brands of their producers such as Eastman (Therminol®/Marlotherm®), Dow Chemical (Dowtherm™), ExxonMobil (Mobiltherm™), and others.

Key properties of heat transfer fluids include thermal stability, low viscosity, high flash and fire points, and low toxicity helping to ensure safe and reliable operation of heat transfer systems. Their selection depends on various factors, including the operating temperature range, heat transfer efficiency requirements, system design, and safety considerations.

Sourced from quality producers, thermal fluids are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines in different grades and packaging options including 210-Liter drums and 26-Liter pails. Based on different blends, AVIATIONEU NEW ERA heat transfer fluids can be used for heating and cooling processes in a variety of industrial applications resulting in economy, efficient operations, minimum maintenance, and precise temperature control.  Indicative industries of their application include: hydrocarbon processing (oil and gas, natural gas, refining, etc.), plastics processing, chemical processing, pharmaceuticals, food & beverage processing, renewable energies and many others. They exhibit similar characteristics, equivalent performance and consist cost effective alternatives to respective competitive brands. Depending on the selected product, they exhibit features and benefits outlined below:

Wide temperature operating ranges

Extended service life

Exceptional thermo-oxidative stability

Fast heat transfers

Excellent compatiblity

Low volatility

Cost savings

Appearing prices are per liter or kilogram depending on the product.

For additional information please refer to the Product Description section or contact us.

FUCHS® Group is the world's largest independent luricant manufacturer developing, producing and selling lubricants and related specialties to cover application needs in different industries, from automotive, mining and exploration, metalworking, agriculture and forestry to aerospace, power generation, construction and transport, steel, metal and cement industries, food, glass and many others.  FUCHS products and related services are structured in six key categories: automotive lubricants, industrial lubricants, lubricating greases, metal processing lubricants, special application lubricants and services.

In the defense sector, FUCHS® offers a comprehensive range of military grade lubricants conforming to NATO specifications. NYE®, part of FUCHS® Group, produces synthetic oils and greases  for special applications. NYE® products are specified for many critical components of Defense applications including:

• Extreme-temperature jet engine actuators

• Cargo aircraft landing gear

• Aircraft controls

• Precision bearings in navigational instruments

• Wide-temperature avionics connectors 

For additional information please refer to the supplied documentation or contact us.

ZOK are powerful water-based gas turbine compressor cleaners and corrosion inhibitors produced by SOLIDUS INDUSTRIES. ZOK products are also offered with pH neutral and an effective corrosion inhibitor (ZOK 27) and with a higher pH without the added corrosion inhibitor (ZOK MX) for more challenging cleaning requirements. Originally developed for the UK Ministry of Defence over 40 years ago, ZOK 27 is used all over the world today within the Aviation, Marine, Power Generation, Oil and Gas and Industrial sectors. Regular on-line and off-line washing with ZOK 27 produces outstanding results in gas turbine engine performance: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – ultimately maximising the ROI on gas turbines.

ZOK 27 products are offered in two standards (ZOK 27 and ZOK 27 GOLD. The latter includes neutral, biodegradable, water-based gas turbine compressor and gas path cleaners specially formulated with plant based surfactants to meet ecological sustainability.

SOLIDUS INDUSTRIES ZOK 27 Gold Standard have been designed to meet the requirements of the OSPAR Convention for reduced environmental impact in sensitive marine environments, such as the North Sea. This scheme is administered by Cefas in the UK. They consist the perfect solution for maintaining peak performance of gas turbine compressors operating in ecologically sensitive environments. Regular on-line and off-line washing with ZOK 27 Gold Standard produces outstanding results: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – all this while minimising  environmental footprint.

ZOK 27 and ZOK 27 Gold Standard  are available as CONENTRATED (CNCTR) and READY TO USE (RTU) product versions in different packing options, 12.5 liters (3.3 USG) cans, 25 liters (6.6 USG) cans, 210 liters (55 USG) drums and 1000 liters (264 USG) IBC containers.

ZOK 27 READY TO USE (RTU) versions are intended for users who do not have access to demineralised water. CONENTRATED (CNCTR) vesrions can be diluted 1 to 4 with water before use (20% solution). Demineralised water (<11μS/cm conductivity) should be used for hot/on-line cleaning. Good quality drinking water (<500μS/cm conductivity) may be used for cold/off-line cleaning.

Please also refer to the attached documentation for additional information on these products.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates.

CHEMETALL® ARDROX® 185 Series colorless scale/rust removers have a greater than 12.5 pH level and a relative density of 1.43. The series includes 185L, a highly alkaline concentrated solution in water containing sequestrants and 185 water soluble powder offering a strong alkaline solution containing sequestrants. They can be used to remove rust and scale from iron and steel  in immersion tanks but also oil, grease and some air-dried paints.  They will not attack or cause hydrogen embrittlement in ferrous alloys and there is markedly less tendency for re-rusting to occur than with acid pickling.

ARDROX® 185L is usually used at a concentration of 30-50% by volume in water, depending on the amount of rust or scale to be removed. This corresponds to a concentration of 200 - 375 g/L of ARDROX® 185 in water. ARDROX® 185 must always be dissolved in cold water. There will be an exothermic reaction and the solution will heat up to 50-60°C / 120-140°F. The ARDROX® 185L is applied by immersion between 82 and 93°C (180 and 200°F). Agitate with mechanical agitation, do not use air agitation.

The immersion time will vary according to the degree of contamination, light rust being removed in approximately 10 minutes while heavy rust may take about an hour. If the components are heavily contaminated with oil or grease, the life of the ARDROX® 185L  bath will be prolonged if they are first degreased (e.g. with an ARDROX 6-series product).

When used in conjunction with the adequate other ARDROX® specialties (sold separately), ARDROX® 185L can be used to remove scale from hot-end jet engine components. It can also be used for cleaning parts made of titanium.

Thorough water rinsing must take place after the use of ARDROX® 185L. If no further immediate surface treatment is to follow, the use of a dewatering and protective fluid such as an ARDROX® 3-series is desirable to give protection from re-rusting.

The ARDROX® 185L  comes in a 5-gallon and 180-liter containers while the 185 powder in 25 kg bags.

Qualifications / Approvals:

SAE - ARP 1755B ( conformance )

CFMI - CFM56

Rolls Royce - CSS244 OMat

SNECMA - DMR 70-620

GE SPMC 70-80-04

Pratt Whitney - SPMC 70-12-00

Turbomeca

For additional information please refer to the attached documentation.

HENKEL BONDERITE® is the premier brand for surface technology and process solutions that create competitive advantages across the industrial manufacturing marketplace.  Trusted for reliability, sustainability & proven results, BONDERITE® processes deliver superior cost-in-use and operational efficiency through a broad portfolio of cleaner, surface treatment, coating & lubricant materials along with engineering services.

HENKEL BONDERITE® range of surface treatment products for the Aerospace industry includes TOUCH-N-PREP® coatings pens, wipes, ready-to use coatings for light metals, liquid cleaners and paint strippers. An overview of these products is included in the Product Description section. For additional information please consult the supplied documentation.

ARPOL AEROSPACE manufactures high-performing lubricants, oils, greases, and solvents for the aerospace industry, both military and commercial, but also for uses in land and marine applications. Their products adhere to stringent requirements and specifications designed to keep aircraft well-maintained. Packaged in accordance with unique military requirements, they include national stock numbers (NSNs), and appear on the U.S. Qualified Products List (QPL). ARPOL AEROSPACE products conform to a number of OEM, MIL, SAE, DEF STAN, and NATO code. Available in different packaging options (1 USQT, 1 USG/5USG Cans & 55 UEG Drums). For additional information on specific ARPOL AEROSPACE products please consult the Product Description section and the supplied documentation.